Alfa Romeo Giulietta Front Bumper and Grill Removal Upgrade and Replace

Подписаться 8 тыс.

Просмотров 41 тыс.

50% 1

In this Alfa Romeo Giulietta video we look at how to / how do you remove the front bumper and change / upgrade / swap out the grill to upgrade it to the new facelift honeycomb version and then put it all back together.
#Alfaromeo
#Giulietta
#Vialettotony
#Driveway
Please like and Subscribe to the Channel to see our other "how to" & "repair" videos and "things you wish you knew earlier", that are uploaded already, and will be getting posted soon with everything from Battery replacement, Trunk / Boot Wiring Looms, Air Filter, Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning, PCV valve, Fuel / Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Rollbar / Sway bar Bushes, Drop Links, Brake Discs, Brake Pads, Brake Fluid Flush, Rear Springs, MOT Preparation, and a whole lot more to come. 2.0 JTDM 170
In questo video di Alfa Romeo Giulietta vediamo come / come rimuovere il paraurti anteriore e cambiare / aggiornare / sostituire la griglia per aggiornarla alla nuova versione a nido d'ape e poi rimontare il tutto.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Per favore, iscriviti al canale per vedere i nostri altri video "come" e "riparare" e "cose che vorresti sapere prima", che sono già caricati e verranno pubblicati presto con tutto, dalla sostituzione della batteria, al bagagliaio / avvio Cablaggio, filtro dell'aria, filtro antipolline dell'abitacolo, pulizia fissa del sensore di flusso d'aria di massa MAF, valvola PCV, filtro carburante / gas, codici di errore dello sterzo fissi, luce airbag passeggero, finestrini elettrici, boccole barra antirollio / barra antirollio, tiranti, dischi freno , Pastiglie dei freni, lavaggio del liquido dei freni, molle posteriori, preparazione del MOT e molto altro ancora. 2.0 JTDM 170
En este video de Alfa Romeo Giulietta, vemos cómo / cómo se quita el parachoques delantero y se cambia / actualiza / cambia la parrilla para actualizarla a la nueva versión de panal de estiramiento facial y luego volver a montarlo todo.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Dale me gusta y suscríbete al canal para ver nuestros otros videos de "cómo" y "reparar" y "cosas que desearías saber antes", que ya están cargados y que pronto se publicarán con todo, desde reemplazo de batería, baúl / arranque. Telares de cableado, filtro de aire, filtro de polen de cabina, limpieza del sensor de flujo de masa de aire MAF, válvula PCV, filtro de combustible / gas, códigos de fallas de dirección fijos, luz del airbag del pasajero, elevalunas eléctricos, barra estabilizadora / bujes de la barra estabilizadora, eslabones de caída, discos de freno , Pastillas de freno, lavado de líquido de frenos, resortes traseros, preparación MOT y mucho más por venir. 2.0 JTDM 170
W tym filmie Alfa Romeo Giulietta przyglądamy się, jak / jak zdjąć przedni zderzak i wymienić / ulepszyć / wymienić grill, aby ulepszyć go do nowej wersji plastra miodu po liftingu, a następnie złożyć go z powrotem.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Polub i zasubskrybuj kanał, aby zobaczyć nasze inne filmy „jak” i „naprawiać” oraz „rzeczy, które chciałbyś wiedzieć wcześniej”, które zostały już przesłane i wkrótce zostaną opublikowane wraz ze wszystkim, od wymiany baterii, bagażnika / rozruchu Wiązki przewodów, filtr powietrza, filtr kabinowy, czujnik masowego przepływu powietrza MAF Czyszczenie naprawcze, zawór PCV, filtr paliwa / gazu, kody usterek układu kierowniczego naprawione, oświetlenie poduszki powietrznej pasażera, szyby elektryczne, stabilizator poprzeczny / drążek wahacza tuleje, drążki obniżające, tarcze hamulcowe , Klocki hamulcowe, płukanie płynu hamulcowego, tylne sprężyny, przegląd techniczny i wiele więcej w przyszłości. 2.0 JTDM 170
In diesem Video von Alfa Romeo Giulietta sehen wir uns an, wie / wie Sie die vordere Stoßstange entfernen und den Grill austauschen / aufrüsten / austauschen, um ihn auf die neue Facelift-Wabenversion aufzurüsten und dann alles wieder zusammenzusetzen.
#AlfaRomeo
#Giulietta
#Vialettotony
#Driveway
Bitte liken und abonnieren Sie den Kanal, um unsere anderen "How to" & "Repair" Videos und "Dinge, die Sie gerne früher gewusst haben" zu sehen, die bereits hochgeladen wurden und in Kürze mit allem von Batteriewechsel, Trunk / Boot veröffentlicht werden Kabelbäume, Luftfilter, Pollenfilter in der Kabine, Reinigung des MAF-Luftmassenmessers, PCV-Ventil, Kraftstoff / Gasfilter, Lenkfehlercodes behoben, Beifahrerairbaglicht, elektrische Fensterheber, Stabilisator- / Pendelstangenbuchsen, Drop Links, Bremsscheiben , Bremsbeläge, Bremsflüssigkeitsspülung, hintere Federn, TÜV-Vorbereitung und vieles mehr. 2,0 JTDM 170

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@ikw6262 2 года назад

Must say, this might be the very best channel for Giulietta-Owners, so many helpful tips, although I got the german version, left steering, but doesn´t matter. Please carry on, I will use some of those by the time. Much better than any handbook I guess. PS. mine is just 5 years old, mostly not needed yet but the time will come... And a lovely car, seems to be constructed repair-friendly

@vialettotony 2 года назад

Hi IKW 62. Thank you for the positive feedback. Really appreciate it. Thanks for watching and subscribing if you have. Have a great evening 👍

@vibdistone 3 года назад

You were correct about the badge. It simply sticks on; you just need to be mindful of the alignment, but this is helped with badge itself.

@vialettotony 3 года назад

Good to know. Thank you.

@JJHurst 3 года назад

Nice, just got a QV line and want to update the grille , very similar to my old GT in terms of bumper removal , good to have a nice clear video though, avoids any nasty surprises ...👍🏻

@vialettotony 3 года назад

Hi Joe. Thanks for the positive feedback. Really appreciate it. Enjoy the car. All the best 👍

@petermonk5981 3 года назад

Fantastic videos Tony. You've answered so many of my questions and I haven't watched them all yet. My Giulietta doesn't have front spots and i was starting to see what i would need to do to fit them. The front bumper removal showed me how, at the front anyway. What I need now is how to fit the switch etc. I bet it's harder than removing the bodywork. Keep up the good work.

@vialettotony 3 года назад

Thanks Peter, really appreciate the positive feedback. Yeah, I’m sure the other bits will pose a challenge or two. Good luck with it all. Thanks for watching and subscribing if you have. All the best. 👍

@johnmcgrellis3474 Год назад

Mate thanks for all your Alfa uploads I've learnt loads from you and given me the confidence to go ahead and DIY my car and save alot of money all the best

@mattyi672 2 года назад

Not sure if anyones said, but that badge is just glued on. I used a bradle and gently worked from the middle out.

@mrcaps1971 2 года назад

I needed this video today as I've put a 2018 Veloce front bumper on my 2015 QV. Hands down, this is the best "how to" channel for the Giulietta on RU-vid. Thanks so much Tony.

@88tazler88 Год назад

Got a QV line too and thinking of changing the grille. Was there any faff because of the parking sensors?

@at_lightspeed Год назад

Thanks Tony, your vids have been most helpful for me.

@vialettotony Год назад

Glad to have helped. Thank you so much 😊 Have a great day. All the best 👍

@simonhodgetts6530 2 года назад

One thing I noticed today when changing over my headlamps, is that you can adjust the height of the bumper relative to the bonnet by removing the fixing bolts, and using the 55mm torx in the fixing hole. By tightening the secondary torx inside the fixing the opposite way to the fixing bolt, you can adjust the height of the bumper fixing, and the panel gap with the bumper.

@nieremek3722 3 года назад

Very good tutorial ! Thank you for your help. Greetings from Poland

@vialettotony 3 года назад

MówMiRemek, thank you for watching. Really appreciate it. 👍

@richardjohnson3463 2 года назад

Brilliant video, very useful, many thanks!

@BojanBojovic 2 года назад

Your videos are so satisfying. You have very steady hands, watching you do it feels like an easy job, but an average idiot will suffer a lot, I know that from experience. :) Another thing is the tools, there is so many things I need to buy. :) Thanks for a brilliant content you have here.

@vialettotony 2 года назад

Hi Bojan. Thank you. It’s all in the editing 😉. Yeah, the amount of tools that I’ve bought and still buy. Thanks for watching. All the best 👍

@mirko7518 2 года назад

Good job Tony👏👏

@WolfmanDOM 9 месяцев назад

Love it mate. Great video as always! Giving this a go today.

@stahlhart8998 3 года назад

AwEsome video.perfect for what i am planning to do.thx so much. Got my sub.for sure.stay safe

@vialettotony 3 года назад

Perfect. So glad it can help. Thanks for watching and subscribing. Really appreciate every viewer. Stay safe and keep healthy. All the best.

@lukasmor 3 года назад

Great quality! Cheers

@vialettotony 3 года назад

Lukas, thanks for commenting and watching. All the best. 👍

@luigicrescenzo3579 2 года назад

Ottimo anche questo video

@GirlsYouTube1991 3 года назад

Did my badge other day heat gun and flat head screwdriver. Really useful video mate also I would stay youre cars had a replacement bumper at some stage hence the missing screw and tipex writing behind it but nice for ten years old

@vialettotony 3 года назад

Thanks and yeah, I thought the same about the bumper too. I know the car had a headlight changed at a dealers once upon a time, so it may have been protocol to Mark it up then, but yes I agree. Thanks for your comment. Appreciate it.

@delboy2503 Год назад

Excellent video 👍👍

@froggy0162 2 года назад

Funny - I have a 2019 model and I much prefer the early grill! Maybe I should swap with someone.

@michaelstaley2241 3 года назад

Very interesting new to your videos lovely cars.

@vialettotony 3 года назад

Thanks Michael. Hope you’re enjoying them. Please subscribe for more if you haven’t already. Lots more planned including the upcoming MOT this month. Thanks.

@skimmingstoness 2 года назад

Great video does anyone know if it's possible to remove the fog light surrounds without removing the front bumper?

@vialettotony 2 года назад

Hi Cornflakes. I’m not 100% on how they come apart, but I imagine it would be a challenge to remove them without removing the bumper. Definitely something I’ll look in to as id love to clean mine up. Thanks for watching. 👍

@mikemk2573 2 года назад

Io ci sono riuscito senza smontare il paraurti con un po di attenzione e un po' di forza vengono via.

@vialettotony 2 года назад

@@mikemk2573 è fantastico. cercherò di fare un video per mostrare le parti dietro le quinte per aiutare gli altri. forse più saranno in grado di farlo come hai fatto tu. ben fatto

@mikemk2573 2 года назад

@@vialettotony 👍

@bucharestpunk 2 года назад

Can you drain the radiator once the front plastic shield from under the bumper is out?

@vialettotony 2 года назад

Hi Honda. Yes, I believe there is a drain valve to the left side of the radiator which is accessible once the shield is removed. I hope that helps. All the best 👍

@RENZ-FIFA 3 года назад

Great video! I need to find the intake pipes for the intercooler. I would be nice to get a red one, do you where to get them. Also I see the protector covering the intakes too. The reason I am asking because my front area got damaged against the deer lol

@vialettotony 3 года назад

Hi RENZ. That’s a shame to hear. It’s something I had thought of doing too, but I have not searched where to buy parts from yet. I believe the retaining metal ties holding the hoses on are single use, so they need replacing too. Good luck with it. Thanks for watching and sorry I can’t help more today. 👍

@asafpe5404 2 года назад

Hi thanks for the video it really helped me to change my grill but i also wanted to switch the 2 lower grills ( with front parking sensor ) but i saw that both of the grills are held by clips and another plastic part that looks like it welded to the bumper ... do u have any idea how to do it ? Thanks again

@vialettotony 2 года назад

Hi Asaf. There’s a video on the channel about removing the front fog lights completely including the plastic surround. You should be able to find it on the channel. All the best 👍

@asafpe5404 2 года назад

Hi @@vialettotony Thanks a saw the video but it doesn't show the part i talked about - I'm talking about the 2 front grills like here www.alfaworkshop.co.uk/images/156090415-4368-1-800.jpg any idea how to change them ? Thanks again !

@fabiods1974 3 года назад

Nice and interedting Video.. I've the same car! Grazie!! 👌

@vialettotony 3 года назад

Grazie Fabio. Thanks for watching and subscribing (if you have). Really appreciate it. Have a great day 👍

@fabiods1974 3 года назад

@@vialettotony thanks, i'm subscript! Good evening!

@GARR0N 11 месяцев назад

Hey Tony, Love your Giulietta series. I found it very clever you used the abs to bleed the brakes! :D Did you find it hard to line up the panel lines after doing this? i want to remove the bumper to get to the fog lights so I can sand a spray them to match the paint of the car so I won't have to worry about them oxidising anymore, as well as maybe changing the front grill to honeycomb however I'm worried the pannel lines will look crap after.

@vialettotony 11 месяцев назад

Hi. it was no problem at all to be honest. Everything lined up perfectly very easily. I doubt you'll have a problem. All the best 👍

@GARR0N 11 месяцев назад

@@vialettotony cheers mate :)

@scuderianikolov7964 2 года назад

Hello! In the video you said there was a slight oil leak from the pipes to the intercooler. I have a similar slight thinking about the pipe, but I have the following problem. Once I drive my car and reach the required temperature, suddenly my cooling propeller turns on, the temperature arrow does not move from 90 degrees. This does not happen so often, but it happens for the second time as the difference with the first was about 100 miles I stop the car on the spot and reach 2000 and 3000 rpm seeing how lightly there is blue smoke for a moment and if I stand behind the exhaust there some heat. After this smoke comes out, the cooling fan stops working and everything works perfectly normal, at least that's what I think. Checking the oil level has not even moved what could be the reason?

@vialettotony 2 года назад

Hi georgi. Not 100% sure but blue smoke would suggest oil for sure. Did you watch my early videos, particularly the air filter video and the MAF cleaning video? Probably worth checking your MAF to see if it’s covered and oil is returning back in the light the air channels. Good luck All the best and thanks for watching. Really appreciate it Vialetto Tony 👍

@michaelbotha1434 Год назад

Good evening woukdbi need to remove the bumper in order to find the radiator cap?

@vialettotony Год назад

Hi Michael. There is no radiator cap, only the expansion tank. Hope that helps. All the best 👍

@cosmic_jungle 11 месяцев назад

Do you have any knowledge as to whether this bumper removal guide would be the same or very similar to a 2016 model? I have a cracked honeycomb grill that I’m looking to replace. Thank you

@vialettotony 11 месяцев назад

Hi. Yes it’s identical I believe. All the best 👍

@stahlhart8998 3 года назад

Ps, with the panel removed would it be possible to reach inside to remove the screws holding the grill? Thx

@vialettotony 3 года назад

Hi Stahl. Not sure I really understand the question? With which panel removed? Apologies, but thanks for watching.

@stahlhart8998 3 года назад

Hello, the one on the bottom. U removed it at the beginning of the video. Thx take care stay safe

@vialettotony 3 года назад

@@stahlhart8998 ah, I see. The answer is no I believe. The intercooler and crash bar would be in the way. Taking the bumper off is easy to do though. I wouldn’t be scared of giving it a go. All the best.

@stahlhart8998 3 года назад

Thanks for letting me know. Problem is, i think due to a minor accident the prev owne had n what I could see so far something is broken at the top corner of the bumper. And i am afraid the bumper wont go back on that easily anymore. Or might not clip in...thats why I avoided taking it off so far...but if i want the newer grill i have to....take care

@vialettotony 3 года назад

@@stahlhart8998 I feel your pain and can’t help you with that I’m afraid. The only advice would be to have a really good inspection before you start, take it slowly, and get someone to help you when you lift it off, to minimise any flexing. Good luck. All the best.

@stahlhart8998 3 года назад

Well so i just found out that the clip for the T30 screw which holds the end of the bumper flush to the side is broken....prev.owner or e mechanic used a washer n bigger screw to hold it kind of in place..but the bumpers end sticks slightly out...any ideas on how I could fix that...do u know of a way to reconstruct a plastic clip somehow? Thx best regards ...

@vialettotony 3 года назад

😬 sounds a bit sub optimal. Reconstructing plastic is outside of my skill set unfortunately. Other than a larger bracket somehow glued to the bumper, you may want to think about leaving it as is if you’ve only just noticed it, or a new bumper from eBay or scrap dealer?

@stahlhart8998 3 года назад

Yeah u are right, just thinking ahead ...wanna replace the grill with a later model one...n what if I have to change a bulb...very annoying this bumper issue...when i bought the car a month ago i noticedvthe slightly sticking out corner but stupid me didnt invedtigate , looked saw a bigger screw thought well who cares,....sometimes u should look twice 😣. Thx for your thoughts n reply all the best

@vialettotony 3 года назад

@@stahlhart8998 take the opportunity to treat it as a mini project and get the job satisfaction from it. Hopefully you’ve seen the front bumper video start to finish and the headlight removal one too. It’s surprising how easy it all comes apart and can be fixed. You sound like someone who’s clear on their target, so I’m sure you’ll be fine. Cheers.

@stahlhart8998 3 года назад

Hello, actually more annoying then a real problem. True. The good thing is that on the Alfa most seems to come apart rather easyly. Worst case screws an aluminum angle and done...but as u said better to leave it how it is for the moment...never touch a running system ...have learned that over the years 😃... About the money also. on ebay a to my specs painted new bumper over 500 , scrapyard one around 250 n in no really good shape...shipping is killing most good deals...sadly....so ...for now just leave it how it is is probably the best...thx again for your advice. All the best

@steviegbcool 2 года назад

i seem to have much bigger panel gap between the bumper and bonet ?

@vialettotony 2 года назад

Hi Steven. When you tighten the 4 top torx screws up, put some pressure on the front of the bumper to push it backwards. That helps reduce the gap. Hope that helps. Thanks for watching. All the best. 👍

@steviegbcool 2 года назад

@@vialettotony cheers mate !

@stahlhart8998 3 года назад

Ps btw do u know how to remove the bumper when there is a light washer system?! Do I have to remove the shields of the washers before I take the bumper t off or not? Thx

@vialettotony 3 года назад

Hi Stahl. Not sure to be 100% honest… I probably look to remove the shields first and then just go slowly once all the fixings are removed. You may be able to see from underneath once the underpants is removed.

@stahlhart8998 3 года назад

Hello, thx for your reply. Looks like the washer unit is moun ted on the bumper. So no need to remove anything beside some hoses...nice dude on alfaowners told me

@vialettotony 3 года назад

@@stahlhart8998 great. I suspected it would be the case, but always good to speak to someone who has done it. 👍

@stahlhart8998 3 года назад

Well now I discovered that for some reason the grill I bought doesnt fit the bumper. Cant get it all alligned.there is a gap between the Alfa badges mounting socket n the bumper. At least 2 fingers wide.Which I dont get. Ppl buy these 2016 grills all the time for the older Giuliettas...had to even make spacers to get a nice even fit...will check again today.something is off..glad i have a spare bumper to test everything out before I remove the one from the car...git it to either practice plastic welding since i have a broken holding clip on my actual bumper or wrap it n put on a spoiler lip n make some other mods without damaging the actual bumper...scrapyard bumper needs a lot of tlc to even consider putting it on...but was 1/5 of what a new one woukd cost..so ... N i must say plastic welding it is working out good so far...but now I have to check again..cant be that the grill only gives me trouble...all the best

@vialettotony 3 года назад

@@stahlhart8998 are you sure it’s definitely a Giulietta grill and not one for another Alfa? Just a thought. Good luck with it though. Sounds like you’re enjoying it all. 👍