Alfa Romeo Spider 939 electric top repair. Common problems and solutions

Подписаться 9 тыс.

Просмотров 6 тыс.

50% 1

Hello guys! Problems with the soft top of the Alfa Romeo Spider 939? Here are the most common causes and their fixes. It took months of work to find all the parts and components. The repair was the same for both Sipders shown in the video. To purchase components and parts, you can contact Simotech via Facebook.
For more related videos, see below in the description.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/alfaromeonoproblem
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
Alfa Romeo Sipder, Brera and GT electric windows issues and repairs:
• Alfa Romeo Spider and ...
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-fcadealer.pt/co... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfaspider #AlfaRomeoNoProblem

Авто/Мото

Опубликовано:

21 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@bananazua 5 месяцев назад

Very useful! I also replaced all gas struts on my own, but had to do a search on the market. Here you go with list of compatible struts (not all tested except GSC!): Roof gas struts: Stroke = 40 mm L (length) = 155,5 mm Lower (keeps glass): F(Force) = 200Nm Original: Stabilus 2609NH Replacement: Stabilus 7456VP, 1338DJ, 9461405C02, SGS NL7015, GSC GSC3104 (replacement for GSC3057) Upper (between 3 and 4 arc): F(Force) = 100Nm Original: Stabilus 2607NR Replacement: 4848DZ, 5579XQ, GSC GSC3103

@alfaromeonoproblem 5 месяцев назад

Very good info! Thanks for sharing

@trickyjibe 6 месяцев назад

I have owned two 939 and faced small problems with roof. Your video is the best and most complete tutorial. Merry Xmas from Italy

@alfaromeonoproblem 6 месяцев назад

Thank you very much for watching. Greetings from Portugal

@AllanChristensen-wx6xn 6 месяцев назад

Your customers must be very happy 🙂 good job and video, keep up the good work 👍

@alfaromeonoproblem 6 месяцев назад

Thank you very much, thanks for watching

@kevh3113 6 месяцев назад

Great vid. Got all the parts ready. Just no garage & wish I had your weather, December, UK.

@alfaromeonoproblem 6 месяцев назад

Hello. Thanks for watching! We have very good weather here, yes. Even now with very cold days, sun is up. And the car heater works just fine.

@srdic.aleksandar 3 месяца назад

I hope that trick from 26:32 will help me with same problem when closing a roof.. Update: It works! You are f.. god my friend . So much horor solved so easy 🙌

@nickfoster8674 6 месяцев назад

Brilliant video, thank you very much for doing this. I have replaced all the gas struts on my car already, and I'm sure I will have to do the flap motors at some point. This video gives me confidence to tackle that when needed.

@alfaromeonoproblem 6 месяцев назад

Thank you very much for watching. I'm glad it's helpful to you

@user-wr2pq4oj9h 3 месяца назад

Grazie one more time!!! Good job and very helpful video like usually... 😉 Obrigado!

@alfaromeonoproblem 3 месяца назад

Thanks for watching!!

@DashCamSerbia 6 месяцев назад

17:42 That shine on the board is conformal coating. It is to protect the components from moisture.

@alfaromeonoproblem 6 месяцев назад

Hello. Thanks for watching. I was referring to the green corrosion on the pins.

@DashCamSerbia 6 месяцев назад

@@alfaromeonoproblem Oh, right.

@alvinek2243 4 месяца назад

Nice guide, I have dealt with most of the problems shown in your video, to bad that upload it not so long ago, I could save a lot of money ;) Anywas I still have sometimes problem with closing hood, its stuckig in the moment like in your video in 39:24, but the error is not permament and after around 10s it will move forwad. Mechanic couldn't diagnose it and blamed it on voltage spikes.

@alfaromeonoproblem 4 месяца назад

Thanks for watching. Most of the times the issue the flap motors and the gas struts.

@alvinek2243 4 месяца назад

@@alfaromeonoproblem Thanks for reply, these gas struts 100 and 200 was replaced 2years ago, I connect Spider to computer and its showing error B1300 and B1306. I know how to handle first one because its related to falp motors and I replaced gearwheel also 2 years ago, but do you know where the B1306 - Tension sensor (low) is? Im closing hood with engine turned on, so for sure its not low Voltage issue.

@alfaromeonoproblem 4 месяца назад

@alvinek2243 already had two spider with a persistent flap fault code and the issue was the hinges of said flaps

@Lee_Pitcher 5 месяцев назад

Worth changing the hydraulic pump fluid every couple of years as this degrades over time and also on the clamshell between the black plastic part and the metal of the clamshell itself there is a channel. Fill this in with black Sikaflex and this will prevent the hood storage area (and boot) from moisture/water ingress

@alfaromeonoproblem 5 месяцев назад

Perfect, thank you

@carellaout7463 2 месяца назад

Hi, thanks very much for your video. I have a question, I am currently in the process of replacing the gas struts in my 939 spider roof to solve the problem where the roof touches the rollbars. I have found a supplier for the gass springs however, the new springs that I bought are 2 of 100Nm and 2 of 200Nm whereas the originals were all 100Nm. This was done on purpose for a more reliable and smooth operation and to avoid breaking the glass rear window. Now the question that I have is, where do I position the 200Nm springs and where do I fit the 100Nm springs? Looking forward to your reply.

@alfaromeonoproblem 2 месяца назад

Hello. The 100 are replaced for the 200 but not for the glass. Those were always 200. Put the 4 at 200

@carellaout7463 2 месяца назад

All the four vas springs that came from my car were 100N

@alfaromeonoproblem 2 месяца назад

@carellaout7463 was not correct. It was 200 for the glass, 100 for the final lock. Can and should do 200 all around

@carellaout7463 2 месяца назад

Ok thanks a lot for your reply!

@east2w 4 месяца назад

Is it possible to make it an easy manual open and close by removing or degassing the struts? I see on RU-vid people doing it with BMW's and the have easy fit kits? Thanks I think this is the way to go as in UK weather is so bad the roof will just keep breaking

@alfaromeonoproblem 4 месяца назад

The struts actually help out a lot, they ensure that the glass goes across the arches. And help out with the final lock. For the total movement they do not make it harder.

@east2w 4 месяца назад

@@alfaromeonoproblem whoever can make a way to do it will be considered a genius ! Thanks for all the great videos 👍

@alfaromeonoproblem 4 месяца назад

@east2w for manual conversion? That will have to have a lot of engineering. You have several latches that would have to become manual.

@east2w 4 месяца назад

@@alfaromeonoproblem as the roof can already be opened manually by unlocking the front and rear bolts with the tool my brain cannot work out why this should be so difficult, I am obviously not to clever 😞 I can just imagine if everything was easily moveable it would be an easy job but obviously not ☺️

@alfaromeonoproblem 4 месяца назад

@east2w you had to produce manual locks for the several mechanisms to ensure it's closed correctly. Then for the open portion done additional ones.