AlfaOBD How To Export Logs-The First Thing You Should Do 

Joe Merica where did you got your tow mirrors ?

Hey bro were you able to program the keyfob?? I know it has been a year already since you posted the comment

I'll have to check when I plug in next, but only one will work. If you try the wrong one it won't connect. Might be trial and error.

If you have 2018 - current you will need the security bypass harness to do anything with AlphaOBD

No, typically the seller will reprogram for you. Well, I haven't found a way in alfa anyway (or seen anyone else do it).

Yes you can change the mileage make sure you wright down the current mileage, idol time , drive time in some cases you will need your 4 pin # to make changes there's a video on how to do this with AlphaOBD or you can use chrysler pin puller app

You should be able to

@@chazpages any idea how?

Cade Leger the tpms showed up before, right?

@@chazpages On the cluster I replaced, yes.

2018 , 2019 ,2019 classic , 2020 , 2021 , 2022 you will need bypass adapter

I’ll have to check my logs, I “think” I’ve seen a paddle shifter present/not that can be changed

Hmm, you can also try in the tablet folders, there is a txt document that tracks all changes

Sounds like you don't have a Google account

2018 - current you will need the security bypass harness

If you just have a check engine light on you can go to any Autozone and have it checked for free or go buy a cheap Walmart or Autozone obd reader

Ah follow this thread/link: www.ramforum.com/threads/2018-ram-security-module-bypass.125133/

Hmm, not sure. I'll take a look next time I'm in the settings.

That's in the ECM not in the BCM if you have a 2015 - current the ECM is locked only way around that lock is to buy a unlocked one and have it programmed

tinpea the OBDLink plus in the description

2009 - 2017 without the security bypass harness, 2018 - current you will have to have the bypass

I don't think so, maybe in the generic mx or mx+ app though. I don't think egt etc is in the alfaobd

What were you trying to change or do? You can clear those errors yourself, but I'd try to figure out why they came on in the first place.

Did you do a car configuration change? You will have to do a proxy alignment. Let it fully complete, it may be slow.

@@isaacschmitz4192 What is a "proxy alignment"?

It works literally just changed my tpms threshold and drop out fog lights

Good tip

Hmm, I'll have to dig around and check. Can a dealer normally do this? If so then we should be able to do so.

@@chazpages Yeah, the dealer sure can! I Googled the crap out of it and couldn't find anything. Let me know if you come up with anything! Thanks

Jeffrey Williams yes! It isn’t locked to one truck. Obviously some features that require a pin will require the specific pin for each truck from the dealer, but Alfa/obd isn’t locked to a vehicle.

Hmm, not sure. I would think it might. Check out the trial and see if there is anything listing it. Or when I plug in next I'll look.

Alphaobd mx

Yes!

See if you can find the logs on the tablet itself, if they aren't in the drive they must be on the tablet logs

@@chazpages I can see the fog dropout disabled in Alfa but when I upload the log so I have a running list of what I’ve done I don’t see the change in google and the new upload actuallly has the original date that I uploaded the virgin settings.

Hey Charles, I appreciate the vids I’ve seen thus far. Last night I took the Alfaobd for a test try and in doing so created several DTCs. I’ve found write ups on some people that had the same issue but for the sake of sharing after a tire size change I had, Service Trailer Brake, Service ABS, Service Electronic Throttle Control, and my speedometer did not work. I found a post on a random forum that said to run an ABS Initialization, which prompts you to run several other tests. I followed those steps but the ABS Initialization “Start” command was not available for me to press, it was greyed out. The other steps worked and that cleared the ABS light, TC light, and my speedometer came back online oh yea and my grid lines for my backup camera came back. The only fault left that is concerning to me is the Electronic Throttle Control. I’ve found a few other posts where guys reference it as a generic code but nonetheless I want to get rid of it. The only thing I did on the engine module last night was tried a Ram Air box actuator test. I didn’t change any settings. It’s worth noting that the ABS and TC lights have been intermittent before using the software. They’re part of why I got it. I already had the ABS module and HCU warrantied 3 years ago. It acts like it did when that happened. Of course the warranty for that is no longer in place hence the purchase of the OBDLink MX+ and Alfaobd software. I’m running a Fire Tablet HD 10 converted to an Android tablet after I saw your vid I thought that was a clean way to interact with all this, better than cables. My trucks a 2017 2500 6.7 4x4 Tradesmen w/ factory remote start. Sorry to dump all that info, just want to get rid of the ETC light. Seems like going into the various modules and deleting faults is worthwhile. I still don’t understand if the ABS Initialization or initiation whatever, was supposed to be available to “Start” or if that’s got to do with my ETC issue. Or perhaps since it’s a 17 I was in the wrong BCM all together since 2 are available? Anyhow am lost at the moment and searching wildly for a way to get rid of the new ETC light issue. Thanks!

@@ericstyer2890 you had two bcms available?

@@ericstyer2890 I changed my 15 to different mm size with no faults but still she ton found the sweet spot.

yes

Yup, 2018 ram 2500 here. What MOD are you talking about?

@@TheTOUGHasNAILS I had to get a harness from z- automotive... OBD short bypass harness

Sam Wilks I have a 2018 ram 2500 with a 6.7 Cummins. Does this really work with our trucks? If this works it would b fantastic and won’t have to go to the dealer and waste money

@@mikhaelcompton9835 it did ....but you will spend as much putting it all together.the harness, alfaobd, and the Bluetooth OBD ll reader.. but with that being said you can change anything you want