ALL Fit adapter review 

I just found out if you use www.allfitgolf.com ad then the code mcgolf it will take you directly to the adapter and all the rest of the products.

I've been using mine for about a year already (on a Ping G430Max) and no problems at all. Swing speed is around 104-106 with the driver. Tried it with TM Stealth for about 3 months, no issues as well.

I bought a set - they are really, really good. And the manufacturer is really responsive, and shipping is expensive but very fast.

LOL next video series, Worst DIY club fitting repairs... Looks pretty cool Jim. I'm waiting for the reverse system where I can adapt my head to any oem shaft adapter system. I think both are needed for the Tinker. Fingers crossed

Hairy McClarey from Johnathon's Diary . .nice groovy swing and thanks for the adapter update.

I've had this idea for the last 3 years. Can't believe someone beat me to it. I guess that's what I get for not being an engineer.

Just ordered and entered the MCGOLF code. Thanks for the walk through. I'm in between a Stiff and Xstiff shaft but have a Taylormade and Callaway driver head I go back and forth on. What a great option to test out combinations without having to rely on a fitter multiple times. Only need two shafts instead of 4. Seeing as how you asked, Shot an 84 last year. Short game and putting were trash all season until the end (after a decade long hiatus -kids) but the Driver was very reliable.

The All Fit system sounds and looks great. Fingers crossed it works for you. Good video. 👍👍

love these adapters...can try all the new drivers using your best shaft.

Was going to order one with 2 sleeves to help support you and a good product but they wanted $25 shipping for $35 of product. They lost my business with that crap. Just thought you should know

Wow thank you for sharing this neat accessory!

I think these are good, annoying thing is the difference in screw sizes so I have to fish out the existing screw for Srixon and PXG for example and replace with the screw provided .... bit of jiggery pokery but worth the hassle in a fitting studio environment

This is the first time I've seen this video. These fittings were most likely made on a multi-axis swiss automatic.😸

Great to see these Jim Thanks for sharing :-)

Would definitely be helpful in fitting for a retrofit of a previous generation driver with a new shaft.

I’m a tinker - wish seen this video some time back

Great video as always!

Used one for just short of a year, then the sleeve failed - the wrench just spins rather than locking the head down. The head still tightens on other shafts, so I guess the threads inside the allfit sleeve wore out? Their web site seems to say their remedy for product failure is for you to buy a new one while mailing the dead one back to them, at which time they will decide if you will get a refund for the sleeve cost (not the shipping). I assume the shipping is on you both to return it and to get the new one. Since their shipping cost is absurdly high, getting a replacement (even with a sleeve refund which again, is their choice) would still cost $40-$50. So with the original purchase including a couple adapters, I'd be looking at $100 spent with no assurance it won't fail again in the future. So I will study the McGolf videos on replacing sleeves and install a $9 replacement. What seemed like a good idea turned out to be an overpriced product with poor durability and indifferent customer service. Would only recommend if you're a point of purchase shaft salesman trying to save on demo shaft inventory costs. Otherwise you'll be like me, without your driver shaft for a while, a little poorer and wiser.

I'm "that guy"

Hi! Just watched this video and as a clubfitter/repairer, it looks/sounds very interesting. I am a lefty golfer like you and have come across some OEM's like PXG/TaylorMade (TM) that have adaptor sleeves for both LH and RH golfers. I currently have a TM M1 3 wood and 5 wood that I am testing......when I took the 3 wood head off, I saw that the sleeve adaptor had "right" stamped onto it which I confirmed with a TM rep is for a RH golfer. The TM Rep said that because I am a lefty, I just need to interpret the settings on the sleeve adaptor reversely i.e. if for a RH golfer the setting would read "Low".....for me as a lefty, it actually means "High" and visa versa. So......does the All-Fit deal with this issue? You also mentioned u do a live Q&A session on Mondays at 5:30pm ET.......I live in BC so does that mean it would be at 2:30pm? I would also be interested in seeing your review of the iron All-Fit adaptor as well so as I am subscribed, will I get notified of it? Thanks and have a wonderful day!

I also use this sleeve.

Jim, In the video you allude to concerns about shaft length when installing the All Fit adapter, but never circle back to that in the video. What were your concerns and what care needs to be taken when installing the adapter? Thanks GGB

Seems like it would be great idea for fitting process not having constantly in the club

Golf industry needs to set some standards

nicely job.

I noticed you said that this adapter was +/- 1.5 degree loft adjustment. Does this mean that I would be able to loft my Titleist TSi1 9 degree head down to 7.5 degrees? As I am sure you know the Titleist adapter only goes down .75 degrees or down to 8.25 degrees in my TSi1. My only other concern is the small size of the rubber ferrule. If I try to replace my current adapter, will there be exposed roughed up shaft? Can I replace the rubber ferrule on the ALL Fit adapter? Thanks for the informative video!

That's a novel take on a universal fit system. I take it this system doesn't require any modifications to the head like some of the others sometimes do?

Great idea,,,,,

Hi, Since I’m a lefty and have gotten an all-fit RH adapter to my driver, is the settings as follows: Std=std Up=up Low=high High=low ? Thank you!

Just found this video about the All Fit Adapter and went to their website. I wanted to order 1 kit each of the .335 & .350 adapters, but the adapters look different now. I believe they are now advertised as Gen 4 adapter sleeves, and does not show any other adjustment collars from the various brands. Do these now not need those and are the sleeves now universal adapters? I tried emailing them but haven't heard back. Do you happen to know if these adapters no longer come in a kit?

Also where do you place the rubber spacers? Should you need to pull a shaft with the all fit adapter, what can you replace the all fit ferrule with in terms of size?

callaway has that sleeve that is extra long (like it has three crowns), unlike a Ping. Will this be a problem?

Ever had an All-fit separate from the shaft (not have the epoxy hold)? We had a few and now we prep the inside of the adapter to rough up the surface a bit.

Hi Jim, I wonder if you'd be kind enough to give me a little guidance in trimming an Accra shaft. I know that Accra don't provide this information as they say it's got to be done by an accredited Accra fitting specialist. I have a raw 182H M3 hybrid shaft that I need to tip trim. I think i need to tip trim by 1.5" to fit to a Callaway adapter to install into a Callaway 4 hybrid 2 degree head. Also, would I need to take any extra length off to take into account of the adapter? Your comments\advice would be appreciated. Best regards.

Interesting content. Cool idea. Question: Would that be sold to fitters or just normal players?

Love the videos. Can I have a clubfitter put the Titleist sure fit system on my ping head and shaft? I like the ability to go upright which Ping system does not allow. Thoughts?

Great video as always. Any update with these adapters?

Does it support the full range of adjustments for each manufacturer or just the standard?

Did the adaptor add playing length at all to existing clubs ?

Nike system was one of the best

I am curious as to if this adapater could be used for lefties and if so would the +1.5 really be +1.5 or would it actually be -1.5. I also could not find any chart on this adapter so I appreciate you going through the settings.

I just bought a whole bunch of them for personal use. I added your code. How do you remove the screw from the driver heads to add the all fit screw? On the website it says there is a flat setting on the driver adapter, what setting is that?

Nice idea. Is the driver head adjustable once the ALLfit is fixed on?

Will it change swing weight? Fine adjustment wont be possible with single shaft setting. Any thoughts?

I'm not sure how to install this onto my shaft. Should the circle with the three line in it be aligned with the top of the shaft?

Hello, do you know what adapter will work with Burrows Mac driver?

What about the lock tight screws in the base of the driver heads. Are they a standard size and thread across all the main manufacturers? So they will all automatically screw into the universal adaptor ?

I have purchased three All-Fit driver adapters and after using them a few times the helicoil in the tip keeps unscrewing. Has anyone else have this issue ?

do they fit drivers from two or three years ago or just the latest models? Thanks

Very difficult website no prices to include shipping any help would be appreciated

Does the different adapters and heads change the playing length of the club?

is this a kit? as they only seem to sell individual units on their site

As a lefty will the sleeves be different

Will the All-Fit adapters work in the old Str8 Fit Nikes that do not use the screw in the end? I honestly don't care about adjustability, but finding the old Str8 Fit adapters alone is a nightmare.

How or where might the ALL FIT adapter kit be purchased ? Thanks

$40 shipped????

Can someone tell me how much is this? I could not find it on the website.

what is the shaft tip diameter?

This product is garbage tried it doesn’t fit properly and destroyed my shaft

What happens if you want or need to take the adapter off the shaft to refit it to a different shaft, would the rubber ferrule melt, or get damaged by the puller?