All NEW GOVEE Permanent Outdoor PRO Lights - Holiday Lighting Made EASY! 

🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv ☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher Govee Permanent Outdoor Lights Pro: amzn.to/3twvs0h Last Years Model Outdoor Lights: amzn.to/3ZV9LD6 Govee Christmas String Lights: amzn.to/45Cp98K Govee Curtain Lights: amzn.to/3tz5fOE 2 meter Aluminum Profile: amzn.to/3ZVh8dY 3m Sticky Pads: amzn.to/3ZU3urr or Extra Hold Velcro: amzn.to/3ts1CtJ Adhesive Tape: amzn.to/3rJCjDf Wire Stripper: amzn.to/3M1LzcE Video I made using Last years model: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PfN650kOQXs.html Cutting Spicing Extending Last Years Model: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b2Pc0BzKIk8.html Using Last Years Model with WLED: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0-M5c2VUl5A.html The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support! #goveeoutdoorlights, #goveechristmaslights, and #goveeholidaylights

Your whole Govee series really helped me to do a great installation. Thank you for taking the time to figure all this out and sharing it with us.

This is definitely the kind of video that gets you in the holiday spirit, ready to transform your home into a winter wonderland.

Holy Cow Chris, I can't believe how quickly you've gone from you making them walk panels and light shapes for your wall out of wood and LED strips (I forget the actual name) to today with a house front like this and that computer desk!, not to mention all the subs, It really couldn't of happened to a nicer bloke, you are flying mate, long may it continue. Best wishes to you and your family Chris 🇺🇸🇬🇧

Thanks for the review. Glad you’re enjoying them.

I love how you set up the lights! very smooth!

i like the fact that you didn’t go overkill on the lights. just enough to make it look amazing without over exposing to much light.

ThankU so much for this idea of hanging on your garage door. I've been searching for ideas for hanging outside and your idea is brill.

My Outdoor Pro kit comes today and after seeing your video looks like I’ll be buying the curtains too because that looks amazing !

Congratulations on Govee featuring your video on their FB page.

Thanks, you got me on those curtain lights. Just ordered those too.

My garage curtains came out amazing thanks for sharing

Everyone came for the lights I’m here for the link to the diffuser channel you used for the curtain lights, 😂

Looks amazing, especially the curtain lights! Such an awesome setup

The last couple of minutes breath taking. I knew the end would be remarkable but yet still I can't stop replaying the great white reveal 🏆✔

Great, informative video! Thanks much Chris!

These do come in black, unlike the previous gen. Probably easier to make them "disappear" on many houses than white. The splicing kit is fine and all but I'd probably still use some Posilocks and shrinkwrap. Almost toolless, and much less gigantic blobs than this, but for people not comfy with working with wires I can see the splicing kit being nice.

Amazing effects! Looks fantastic! Govee is dominating!

Thank you so much! I was trying to figure out a solution for the curtain lights 🎉 And was thinking about adding lights to my column. I'm off to the store now! 😊

Simply impressive!!! Great video!

Really nice review & setup! Enjoyed it thanks!

Really like this product as it is easy to install and get into the Christmas spirit

Friggin sweet! You’re my hero! I wish my neighbor did something like this.

Looking great Chris! I live in an apartment so I can't get as elaborate as you, but I do have 2 sets of curtains on my balcony that look great and one set of curtains inside that I constantly play with. One thing I would love to see is more in depth on creating your own animations for the curtains, specially with 2 or more joined. Thinking out loud here, getting them to interface with WLED instead of Govee's controller might be an interesting experiment. Keep the videos coming Chris, always look forward to seeing what you have coming up next.

nice, have a few Govee items and have been happy with the products they put out.

Another great video Chris. You are the sole reason my home office is as cool as it is! 👊🏼

Great job thanks for sharing

Bro I want this so bad! Looks incredible! Also great camera work

This looks amazing. Now I need to add some curtain lights to the house.

this looks so nice!!!

*AWESOME!* 😎 Thank you Chris.

So great! Well done, sir!

Can’t wait for Christmas 2024!

I just installed 3 sets on my garage door tonight. I didn’t have track to place the lights in. I hot glued a magnet to the back of each support.Hopefully holds up to the cold temps. -5 Celsius 28 Fahrenheit. I wish there were more options , timer or scenes when the curtains are spliced together. Thanks for the vid. It is a great idea. And works well.

Outstanding thank you.

Great video, and I love that front seating area!

Thank you very much for your tutorials. I made a structure of 4000 LEDs

Just purchased 3 of the curtains using your affiliate link. Thanks for your alternative solution on mounting this on the garage!

Very nice! Just picked up the 150ft non pro version of the outdoor lights thanks to your videos. Hooray for only climbing on a ladder one more time.

Love the light curtain over the garage door while still keeping the garage functional! Wondering how the light strings look when it's windy? Do they get all tangled from not being attached at the bottom?

Great video. I hope you have some outdoor cameras in case some kids try stealing all your lights. Keep the videos coming .. Thank you

Absolutely incredible! 😊

A list of the dreamview choices would be great. Your sequences are fantastic at the end

You did a fabulous job.

great video

Very nice!

Can you do a video where you walk us through how you were able to create the light shows you displayed here! I think that would be very appreciated!

Dory Hayes below answered one of my questions. I was also wondering how they do when it's cold and the plastic/wire is less flexible. While these look fantastic, I live in Arizona and I'm curious how they would hold up in the heat. As well as our winter months which are, notably, much more mild than other states.

Looks sweet. Great tutorial.

Hey Chris I’m super new and now just experimenting. When extending an led let’s say adding 16feet to an existing 16feet strip. What should I do to the power supply? Increase volts or amps ? I have the muzata 96 led you showcase not too long ago. And esp32 for wled. However you mentioned that the esp needs a 5 volt power supply. But the strip are 12 volt. Could I use a 5 volt 10amp to power the 32 feet?

I keep telling people Govee is the absolute best!

I will be using the splice kits on the Pro version and then using the extension wire to the next set of eaves. Do I need to use the cut off lights after the extension or can I just plug the next string of lights in?

Are the connectors between the strings on the pro the same as the original version? I'm curious bc I just had the pros delivered and thinking about buying more of the third party extensions you used in the splicing video.

Hi when you use the dream view music to set up all the lights together.. are you able to select your own music?

Did you use any of Govee music or sync boxes to make the all work together? If so which sync box did you use? Thanks 🤙🏽

Very cool

it would be nice if they came out in australia

What speaker did you use to connect with lights? Direction/how to?

@ 4:06 when you cut the cables open, did you notice any difference in the guage of the wire? I ask because the Pro's jacket says 20 AWG and 22 AWG. I am assuming the signal wire is the smaller 22 awg. I am hoping to just solder and splice a set of lights rather then using the barrel connectors as they stick out for my install like a soar thumb,.

Awesome man! Some of those scenes are quite gaudy but whatever, blinky lights are so fun haha. The garage and curtain lights really look amazing with the animations. Cost is a problem as I believe I would be looking at $500+ just to do front of my house 2 sets. Same with Christmas tree lights. Expensive. Govee and Hue are not cheap lights but both seem to be high quality and that’s means they cost more.

Masterpiece

Awesome video! Convinced me to buy the combo Christmas light kit they just put on Amazon. One question though. What are the connectors that you lock the stripped wires into?

I have the curtain lights on my garage as well but living in Kansas where 40mph winds are the norm it's hard to keep them untangled. I really wish Govee would improve the linked mode for the curtain lights as they really pushed that feature as a selling point. Issue is they didn't make linked mode to act as a single unit where you could upload a gif and it play without issue, your stuck using their prebuilt scenes.

Looks great ,i would like to do my garage door

Hey Chris, Where do you get your music from? The best part about your videos are listening to the music and watching the lights. I'm really interested in listening to longer versions of the music. Thanks.

Hey Chris! LOVE the lights! I just bought 3 of the curtain light sets to use on my garage door. Currently, it's fairly windy here. Any issues with the curtain lights in moderate wind? Any recommendation on how to attach the ends of the strands onto the door to keep them in place? I'm reading that others have their lights getting tangled and constantly need fixing.

I would be interested to see you come up with a diy version of these using WLED.

Just curious how did you end up connecting the lights to power adapters for the individual pillars?

Can you explain the 12 foot extension on the Govee Pro lights? Looks like you used to go from the 1st floor to 2nd floor however that looks shorter than 12’. How did you hide the excess? It cannot be shortened?

If I need to buy more wire to add as a gap filler from one soffit to the next what gage do I need to get and is it an issue if I use any length of wire I want to fill the gap? Shouldn't be more than an 8' gap I need to add. I have a trilevel Home so I need to do some jumps from one soffit down to another a couple times.

Great details as always! Mine are on the way. I know they don’t have as much customization as WLED but curious what the most amount of programming is possible with Govee? Maybe a part 2 just playing with the in app features?

Hi Chris. Do you happen to know the distance between each LED for the outdoor lights and the outdoor lights pro? Also, in terms of mounting options, can the LEDs be mounted with anything other than the sticky back? There is a mention of clips as an alternative for mounting the LEDs. Is that true?

I just finally got 2 sets of curtain lights. How did you get that playlist to go from individual presets to all 3 spliced?

Nice video of your display Chris. I’ve been using RGB strips last few years and just came across your channel. I’ve never heard of Govee before and the simplicity of the installation process. With the curtain lights, is it possible to program it with a countdown of days before Xmas? I will definitely look into Govee products for 2024 holiday season.

I hope Govee is hooking you up, they're going to sell a ton of lights, I'm thinking about going to Florida to install these on my mom's house

Do you think the string lights system that you made would work well around your housing trim?

For the garage how do you keep the cables above when you open and close the garage? When it opens doesn’t it require more cable as the top of the garage door rises, then when closing the cables tension would release of course causing much more slack. I’m trying to figure out that out now cause when the garage door up it’s fine but once it’s down all the excess wire gets in the way and I have to halfway open the door to pull them back up and straighten them out. Just seeing if you had any ideas

can the pro version be cut/extended just the same as the non pro? is there a limit on total length when adding wire? I have a 15 ft jump that from porch to garage that I need to make somehow

I have a choice of getting either the 1/2 or 5/8 aluminum U-Channel … anyone know which one fits the best. I have 3 curtain lights I’m installing this week. Thanks

Wow! Awesome

Awesome video, subbed!

I heard that as you add more curtain lights the options that are available for display keep going down. Many of the features of the single curtain won’t work when three are connected. Is this true?

I just put up 3 curtain lights on my mom’s garage door this past weekend. I was excited when I saw your garage done the same. I haven’t figured out how to add them to the automation for whole house displays using it as one big screen as opposed to three individual ones. When they’re individually set up I can add them to Dreamview presets but when they’re spliced I can’t seem to figure out how to have them turn on with everything else. We have about 13 Govee products on the house now.

Can I ask how did you connect all 3 of the curtain lights together? I can't find any advice or vids on how to splice these together? Can you explain how you did it please?

I have the curtain lights and the original permanent lights. Will I need the outdoor music box to sync these?

Did you think of using a FM transmitter, I am concerned if by using FM transmitter and then playing the music via a speaker for the show music box will reduce the sensitivity to the music

Great video. Can you post the apply govee option so we can use that curtain scene?

How well does that sticky tape hold in cold weather? I am talking about -25 C to -40 C in winter. Do they come with any type of clips that can be screwed in if the tape does not hold in cold weather? I assume that the lights need a wifi connection so do you find any problems with connecting to your wifi with the lights being outside and the modem inside? Thanks.

Im stuck between finish installing the Govee RGBIC 1st generation outdoor lights, or take them down and return them for the Govee PRO ones. Im just not sure if I want to spend the extra $400 for the PRO ones. Is it worth it??

Can you set the app to cycle the 3 Christmas preset dreamview scenes so one plays after the other?

Can you hook up wled to the string and curtain lights?

Can you attach the string lights to one another or do they have to be plugged in individually?

The Pro kit lumen per pod is higher. Dont need as many light pods as the regular kit to illuminate the same area.

Hey, quick question do they light up far being placed as high as two story houses roof?

The track you used for the curtains, muzata ones, does the track need to be as deep as it is, meaning the deep one? Or can we get the more shallower one instead no one that's like half the price?

What do you hook the lights up to to play different affects

Is that a light curtain on the garage door? Also did you have to use 2 or is there one big enough for a 2 car garage?

Very nice. I just ordered 2 sets of the 100' pro in black. We'll see how I'll be able to connect/sync them. I understand there's a limit to 150' without a driver but I already contacted them.

Excellent video as usual. Can you control every light ot are they in sets of 3?

During the off season, I thought it would be nice to decrease the 'amount' of lights that are on to say every third one so they are more just accent lights. Is that possible and easily to do?