Тёмный

All The Connections Needed To Upgrade Your Wash Setup | Hose Reel Included 

Cars With Keav
Подписаться 19 тыс.
Просмотров 58 тыс.
50% 1

Heavily requested video explaining the many connections and fittings needed when upgrading your wash setup. I hope this helps you get what you need to dial in your new setup. Don't forget the bloopers at the end.
We got an Amazon Storefront now
amazon.com/shop/carswithkeav
Chapters:
0:00 Intro
0:33 Garden Hose Quick Disconnect
2:43 Pressure Washer Connections
5:33 Upgraded Hose with Stock or Upgraded Gun
7:55 Stock Hose with Upgraded Gun
9:28 Alternative never upgrade Hose Connections
10:56 Hose Reel setup
15:57 Spray Gun Quick Disconnects
16:59 Final Thoughts
17:44 Bloopers
Most of the listings below are in Brass for a lower budget. There are Stainless as well which I use as well as you can buy them in pairs to have a spare and save a little on both.
Garden Hose Accessories
Firehose Bucket Filler Nozzle - amzn.to/3d9SKLv
1" Inlet Hose 6 feet - amzn.to/2BidN1m
Garden Hose Connections
Garden Hose Quick disconnect - amzn.to/3fMQ8HV
Brass Garden Hose Shutoff valve - amzn.to/3d39O93
Pressure Washer Products
Pressure Washer Hose - amzn.to/2WEaD2M
MTM SGS28 Spray Gun (No Fittings)- amzn.to/3s20y9z
MTM SGS28 Spray Gun Fittings installed - amzn.to/3dTuKPh
Active VE52 Pressure Washer - amzn.to/3fWWqp9
Pressure Washer Hose Reel - amzn.to/2HwjdIZ
Pressure Washer Full Setup Fittings
M22 14mm with 3/8 male plug - amzn.to/3cgb6gu
or (Depending on on the Pressure Washer uses)
M22 15mm with 3/8 male plug - amzn.to/3DFrPog
3/8 Female Quick Disconnect - amzn.to/3yU8xtY
Fittings for Upgraded Hose and Stock Sprayer
M22 14mm with 3/8 male plug (2 pack) - amzn.to/3wRPyyv
or (Depending on on the Pressure Washer uses)
M22 15mm with 3/8 male plug (Need 2) - amzn.to/3DFrPog
3/8 Female Quick Disconnect - amzn.to/3yU8xtY
Fittings for Upgraded Sprayer and Stock Hose
M22 14mm male to 3/8 Female Quick Disconnect - amzn.to/3ce3FX6
or (Depending on on the Pressure Washer uses)
M22 15mm male to 3/8 Female Quick Disconnect - amzn.to/3DFrPog
3/8 Female Quick Disconnect - amzn.to/3yU8xtY
Hose Reel Connections
Could not find my exact hose, this one has both an adaptor on one end to go male or female
Male to Female/Male 3/8 NPT Jumper Hose - amzn.to/2RlD9DT
3/8 NPT Male to 3/8 Female Quick Disconnect - amzn.to/3yWlgfX
or
3/8 NPT Female to 3/8 Female Quick Disconnect (Cheaper) - amzn.to/3id1mHz
Alternative hose setup if you don't want to take off 3/8 male fitting
M22 14mm with female 3/8 Quick disconnect - amzn.to/3z003S1
Fittings for Upgraded Sprayer (If none were provided or installed)
3/8 Male NPT to 3/8 Plug - amzn.to/3cgqRE4
1/4 Male NPT to 1/4 Quick Disconnect - amzn.to/2S0kxtx
Sponsors:
Sliplo - HEIDI at or 15% off sliplo.shop/carswithkeav
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/ref/Heidi_the_335/
BBS Wheels- www.bbs-usa.com
Eurofed - www.eurofedautomotive.com
Street Approved Customs - www.streetapprovedcustoms.com/
Liqui Moly USA Canada - www.liqui-moly.com/en/us/
Camera Equipment:
Main Camera - amzn.to/2IbheXB
Lens - amzn.to/3anD06y
GoPro - hamzn.to/2IdMzcn
Dashcam - amzn.to/38jFlOB
Tripod - amzn.to/2PHLQnO
Gopro Mounts - amzn.to/38hmnrN
Main Camera SD Card - amzn.to/2x00FeV
Gopro & Dashcam Micro SD Card - amzn.to/2Ti2PQ0
Main Camera Batteries - amzn.to/2IqoIGF
Filters - amzn.to/2VPYPYL
My Social Media:
Instagram - / carswithkeav
Facebook - / heidithe335
Tiktok - wm.tiktok.com/WEM11y/
#carwash #washsetup #washcart

Авто/Мото

Опубликовано:

 

10 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 203   
@simasm.9757
@simasm.9757 2 года назад
3:14 companies who make their own connect: bosch, some AR, black and decker, patriot, Daewoo, bort, lavor, bauker, vax Briggs and Stratton hehe let's make it harder, AND include shit gun and hose :) and we in Europe use another type of QC for the garden hoses interesting
@CarsWithKeav
@CarsWithKeav 2 года назад
There are a good bit out there. I look at the pictures real close to make sure its all M22 fittings, but there are actually adaptors available for some of these I have just never seen one in person. LOl Thanks for this information.
@simasm.9757
@simasm.9757 2 года назад
@@CarsWithKeav yes there is adapters but you need them, with other you don't so yeah its a extra step to upgrading I myself got a bosch and its extra like 11 bucks and 1 month to get it sucks but I did buy it
@bbdetailing9123
@bbdetailing9123 Год назад
My pressure washer came with some of those odd ones. Still don't know what type of fittings they are. Ugh
@simasm.9757
@simasm.9757 Год назад
@@bbdetailing9123 post it on some groups on detailing maybe they can help ?
@bbdetailing9123
@bbdetailing9123 Год назад
@@simasm.9757 good idea. Thanks
@Ray-Chien
@Ray-Chien 2 месяца назад
This is by far the most informative and helpful videos for quick connects and hose fittings that I've ever seen. Thank you! Some 3/8 pressure washer hoses now provide female quick connects on both ends so you don't have to deal with the male quick connect, which saves a lot of time and efforts.
@CarsWithKeav
@CarsWithKeav 2 месяца назад
Appreciate that there is also a female connection you can put on the pressure washer that will work with the male end as well. Some hoses are coming with those as well.
@damianbosselait1886
@damianbosselait1886 2 года назад
I never usually comment on youtube videos, but this is by far the most helpful video on pressure washer/ hose reel set ups that I have seen. Thank you very much for uploading
@spunkee311
@spunkee311 5 месяцев назад
Thank you so much for this video! I bought everything you recommended and was very happy with the results! - Flexzilla Garden Hose - Shut off Valve - Phohir upgraded Pressure hose - Quick Connects - Greenworks 1700 PSI Pressure Washer
@CarsWithKeav
@CarsWithKeav 5 месяцев назад
That is awesome! I hope it makes washing more fun!
@LMcI01
@LMcI01 Год назад
Rather than removing the male QD from the hose, I'd put a female QD on the outlet of the washer unit. That way your hoses can connect together to act as extensions if you ever need to have more reach, and, you don't have to remove that torqued down fitting from the factory
@CarsWithKeav
@CarsWithKeav Год назад
I mentioned that in the video, but I didn’t have the adapter. Also at the time they didn’t make 15mm ones and I didn’t want to confuse people with another adapter to bring from 15 to 14. You are right though it is an easier way.
@jellybean8770
@jellybean8770 2 года назад
I`ve seen almost a dozen videos about QC. This one will be my last. It is the absolute best video explaining the most effective setup for QC. Thanks so much !
@CarsWithKeav
@CarsWithKeav 2 года назад
Appreciate that!
@Youknowitbby
@Youknowitbby 3 года назад
Thanks for all this info when I got my first pressure washer I had no knowledge of the fittings and all that jazz took me about a month and some change to figure it out. Not only did I gain some knowledge but some awesome upgrades to do in the future thanks for what you do Keav 🙌🏼🙏🏼
@CarsWithKeav
@CarsWithKeav 3 года назад
I was the same way. I kind of knew about how they worked, but not what was needed so I have lots of extras lying around for just about any pressure washer. lol
@traveler7249
@traveler7249 3 года назад
Well described with clear explanations. Keep the vid coming.
@CarsWithKeav
@CarsWithKeav 3 года назад
Appreciate that.
@endyvaldovinos8134
@endyvaldovinos8134 Год назад
You saved me from having to return my active ve52 that I got on a deal! You my friend have now been subscribed to!
@CarsWithKeav
@CarsWithKeav Год назад
Awesome! Glad to help.
@ronnie10231
@ronnie10231 2 года назад
This was the best explained video;thank you 👏🏽❤🙌🏽.
@CarsWithKeav
@CarsWithKeav 2 года назад
You're Welcome
@AJLoDato22
@AJLoDato22 Год назад
VERY helpful video - appreciate how detailed you are.
@CarsWithKeav
@CarsWithKeav Год назад
You’re welcome.
@tomhenry4993
@tomhenry4993 2 года назад
Excellent review. Thanks for the education!
@CarsWithKeav
@CarsWithKeav 2 года назад
You're Welcome!
@rafaelgutierrez4240
@rafaelgutierrez4240 Год назад
Thank you for the helpful info 👍
@CarsWithKeav
@CarsWithKeav Год назад
You’re welcome
@Rais1959
@Rais1959 Год назад
Thank you very much for the information. God bless.👍😊
@CarsWithKeav
@CarsWithKeav Год назад
You're Welcome
@jtbwitit1
@jtbwitit1 Год назад
Yo. Thanks for this video. This was very helpful for me.
@CarsWithKeav
@CarsWithKeav Год назад
You're Welcome
@MrJuandiego1988
@MrJuandiego1988 2 года назад
This was a godsend. Thx
@CarsWithKeav
@CarsWithKeav 2 года назад
Glad to help.
@remistrailcamvideos6306
@remistrailcamvideos6306 3 года назад
Excellent video - thanks! And the Ryobi 1600/1.2 is absolutely relevant considering many people have it, arguably the most popular pressure washer with a 1.1mm orifice for do-it-yourselfers (like me) and can see what’s needed to add these upgrades to it so thank you for using that as an example…. Very helpful!
@CarsWithKeav
@CarsWithKeav 3 года назад
Yeah, that was my first and it finally broke. I think I can still fix it. Buzzing from the GFCI plug so probably could replace that, but this was my excuse to my wife to get a new one. LOL Appreciate the feedback and good luck with your upgrades. If running that Ryobi the 3.0 orifice nozzle gets that sweet spot if you are not already using it. Gets GPM close to 1.4 and 1k PSI.
@remistrailcamvideos6306
@remistrailcamvideos6306 3 года назад
@@CarsWithKeav Yea I got one on Marketplace for $20 - and when it dies I’ll prolly get an Active - all for personal home use. I added the QD’s, Uberflex 50’ hose and Mckillans gun with swivel. Didn’t think to get QD’s for spigot tho - so I’ll get some.
@MC-ht6lw
@MC-ht6lw Год назад
Great channel, you explain things well.
@CarsWithKeav
@CarsWithKeav Год назад
Thank you
@jtbwitit1
@jtbwitit1 2 года назад
Great Guide Bro!
@CarsWithKeav
@CarsWithKeav Год назад
Appreciate that!
@TheDailyDriven
@TheDailyDriven 3 года назад
Great video with the full breakdown. Also sick shirt 👕💯💯💯
@CarsWithKeav
@CarsWithKeav 3 года назад
Appreciate that. Some of the best feeling shirts I have ever worn.
@anthonyelvy7775
@anthonyelvy7775 3 года назад
Great job explaining boss, awesome, thank you
@CarsWithKeav
@CarsWithKeav 3 года назад
Glad to help
@andersonjimmy1691
@andersonjimmy1691 2 года назад
That was a very helpful video - Thanks
@CarsWithKeav
@CarsWithKeav 2 года назад
You’re Welcome
@aguiluzdaniel1824
@aguiluzdaniel1824 2 года назад
Very useful videos,thanks for the upload sir.
@CarsWithKeav
@CarsWithKeav 2 года назад
Thank you
@paul9387
@paul9387 Год назад
Literally was watching this when you liked my comment on the other video 😜
@CarsWithKeav
@CarsWithKeav Год назад
I’m always around. 🤣
@paul9387
@paul9387 Год назад
@@CarsWithKeav ma man! I'll send you a photo once I finish everything. Is your email listed somewhere for public? Or any other contact so I could send you this pic
@DaiLoo888
@DaiLoo888 3 года назад
Thanks man, you are save me from trial and error....
@CarsWithKeav
@CarsWithKeav 3 года назад
Awesome, glad to help.
@bimmerbroM3
@bimmerbroM3 2 года назад
great video really came in handy I just bought the ve52
@CarsWithKeav
@CarsWithKeav 2 года назад
Nice, hope it works out for you.
@Stangrider1
@Stangrider1 3 года назад
Great advice. Thanks! Gonna have to pick up a shut off valve 😎👍
@CarsWithKeav
@CarsWithKeav 3 года назад
You won't regret it. I have abused mine for over a year and still works perfect.
@Stangrider1
@Stangrider1 3 года назад
@@CarsWithKeav You are correct! 👍
@gunsmokezz
@gunsmokezz 3 года назад
Omg thank you!
@CarsWithKeav
@CarsWithKeav 3 года назад
You are most welcome.
@johnomahoney7755
@johnomahoney7755 2 года назад
Your great thanks a million!
@CarsWithKeav
@CarsWithKeav 2 года назад
You're Welcome!
@nancyosborne-webb646
@nancyosborne-webb646 11 месяцев назад
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ru-vid.comUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
@CarsWithKeav
@CarsWithKeav 11 месяцев назад
Good to hear.
@DETAILINGDETAILING-hb7bj
@DETAILINGDETAILING-hb7bj 3 года назад
thanks for posting, I have both of those units (pressure washers) backups to my KRANZLE 1322TS active is failing, burning smell and shuts off, after cooling for a bit it starts up but too time consuming
@CarsWithKeav
@CarsWithKeav 3 года назад
That's strange. Hopefully its not a consistent issue with them. What orifice size you using for foam. I know using the 1.1 to test and it was not liking it. Kranzle or AR Blue would be my next step if the Active goes bad. My Ryobi bit the dust after 3 years.
@bbdetailing9123
@bbdetailing9123 Год назад
In for the bloopers
@CarsWithKeav
@CarsWithKeav Год назад
I’m a natural at them. 😂
@bbdetailing9123
@bbdetailing9123 Год назад
@@CarsWithKeav hahaha
@F80Ho
@F80Ho 3 года назад
Those quick disconnects are a game changer! Nice arsenal brotha, good reviews 🙌🏽
@CarsWithKeav
@CarsWithKeav 3 года назад
Thanks bro, they make life so much easier.
@auto1234
@auto1234 6 месяцев назад
Love the video “3/8” inch is hard to say fast lol
@CarsWithKeav
@CarsWithKeav 6 месяцев назад
A lot of things are hard for me to say fast. 🤣
@mand0c0mmand0
@mand0c0mmand0 Год назад
You can get a female QD that is M22 14mm that hooks to the male threads and this way you don't have to change the male QD in the hose.
@CarsWithKeav
@CarsWithKeav Год назад
Very true, I mentioned that in the video somewhere can’t remember though. 😂 Should have highlighted it more. Some hoses come with it as an accessory as well. 15mm ones are not as common though.
@chrisgee4015
@chrisgee4015 2 года назад
Great video man been looking for a in detail on the quick connects 🙏🏼👏🏻🤘🏻
@CarsWithKeav
@CarsWithKeav 2 года назад
Glad to help
@JP-ro2yi
@JP-ro2yi 2 года назад
Wow great ideas! Im watching videos and buying detailing supplies and hopefully start my own detailing business next spring!
@CarsWithKeav
@CarsWithKeav 2 года назад
That's awesome!
@RelentlessMocha
@RelentlessMocha 2 года назад
Thumbs up for the vid.
@CarsWithKeav
@CarsWithKeav 2 года назад
Appreciate that!
@christopheramerally3194
@christopheramerally3194 2 года назад
Best video on you tube about this topic, greatly appreciated. Questions, with the hose reel setup, my pressure hose has a standard M22-14 mm connector, to make the connection I would need a 3/8XM22 adapter.
@CarsWithKeav
@CarsWithKeav 2 года назад
Thank you! If connecting a M22 14mm hose to the hose reel then yes you would need a m22 to 3/8 NPT adapter if the reel has a 3/8 female npt thread. amzn.to/3vaD4UW
@christopheramerally3194
@christopheramerally3194 2 года назад
Thank you.
@77autodetailing
@77autodetailing 2 года назад
Awesome! You help me to setup my Hose Reel! Thank you! :-)
@CarsWithKeav
@CarsWithKeav 2 года назад
That's awesome, glad i could help.
@hamsack981
@hamsack981 2 года назад
That ball valve is a good idea!!! Thank you. Fuck, I love RU-vid.
@CarsWithKeav
@CarsWithKeav 2 года назад
Me too!
@skrrtproductions
@skrrtproductions 3 года назад
Gotta have the QD's! Nice video man. I need to upgrade my hose ASAP haha
@CarsWithKeav
@CarsWithKeav 3 года назад
Good hose makes a big difference and less hassle.
@dannysandoval5195
@dannysandoval5195 Год назад
Another great educational video Keav. Question, I'm thinking about getting GREENWORKS 60V 1800 PSI cordless battery power pressure washer. Is that setup different from a electric pressure washer? Can I add a quick connect with a new better quality gun? Is this possible? I tried looking at RU-vid but no one has done this.
@CarsWithKeav
@CarsWithKeav Год назад
Is this the one with where you put water in the top? I tried looking, but only see it available at the Greenworks site. Looking at that one it’s upgradeable for sure. If it’s not the one reply with a link and I’ll give it a look.
@jackevans3794
@jackevans3794 2 года назад
I know you mentioned OG. What do you think about the upgrade of the Acrive VE52. Original VE52 is 210 but for extra 4-500 you can get an upgrade on 50’ kobrajet hose, inlet hose w/SS Mosmatic sprayer and wand MTM foam cannon. Just curious your thoughts on this upgraded version from OG Thanks
@CarsWithKeav
@CarsWithKeav 2 года назад
That upgraded version if you have the money then its worth it. I decided to try and piece together my setup kind of based on his, but using quality products that wont break the bank from Amazon and Tractor Supply. Saved me probably $100 or more overall. Now if I could easily afford the VE52 most expensive package I would probably just spend the extra $400 and get the AR Blue 630 package which gets you the best GPM electric pressure washer out there.
@romansky1720
@romansky1720 2 года назад
For the inlet hose (from house to pressure washer), I purchased the same brand as yours, but I purchased a 3/4" diameter, 15' in length hose. Will this be sufficient? Thanks!
@CarsWithKeav
@CarsWithKeav 2 года назад
More than enough. The pressure washer can only intake so much. The 3/4 has a better chance to stay at full volume as there is less cavity to fill. The one inch if you don't have enough pressure from the house you can get air into the unit. The reason we use bigger heavier hoses is they lay more flat and stay where you want them to and will last much longer.
@wilfredgomez2632
@wilfredgomez2632 Год назад
Hi. I want to upgrade my reel for a retractable one but some are expensive. I’ve seen detailers are installing air reels into pressure washer hose reels. Any suggestions? Thank you for the video. Excellent!!
@CarsWithKeav
@CarsWithKeav Год назад
I myself don’t use air hose reels since they are not rated for the pressure, but many are doing it. Check out this from Stay Slick ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2YeQ4D_Ie6U.html
@boomdoggy
@boomdoggy 2 года назад
Hey Keav, your link for the Pressure Washer Full Setup Fittings for the M22 15mm with 3/8 male plug links to the 14mm. Please advise. Thanks!!!
@CarsWithKeav
@CarsWithKeav 2 года назад
Appreciate that. Looks like the Amazon listing was changed which happens a lot. LOL
@robosborne722
@robosborne722 Год назад
Great video but one question, I have a sunjoe power washer and I’m looking for a quick connect kit from my standard green garden into the sunjoe, can you link the quick connect link? Thank you very much for your help in advance.
@CarsWithKeav
@CarsWithKeav Год назад
I use these to connect my garden hose to a pressure washer. amzn.to/3RXJjnY
@juanmarquez6232
@juanmarquez6232 2 года назад
Hey boss great video!!! Just wondering if the I could use the same reel you are using with a 3300 psi pressure washer?
@CarsWithKeav
@CarsWithKeav 2 года назад
Supposed to handle up to 4000 PSI
@vinosfinostapasandwinebar5109
@vinosfinostapasandwinebar5109 2 года назад
What hose reel and power washer reel do you recommend? The ones I see are crazy expensive or not durable. Almost make the power wash hose disposable! Nice and simple hook up video. Thank you.
@CarsWithKeav
@CarsWithKeav 2 года назад
A good one is the general Pump amzn.to/3LnSivv Its less than a $100 and quality is good.
@romansky1720
@romansky1720 2 года назад
Do you need the 15 fitting for the stock gun to connect to a quick disconnect or will that fitting that comes with it work just fine? Thanks!
@CarsWithKeav
@CarsWithKeav 2 года назад
If you are referring to the Active VE52 in order to connect the stock gun to a QD from a hose you will need a m22 15mm to 3/8 male fitting. If I’m mistaken on what you are asking let me know. I will make sure you get what you need.
@chrisobrien953
@chrisobrien953 2 года назад
Amazon has the quick connects for the Active power washer
@CarsWithKeav
@CarsWithKeav 2 года назад
They sure do, the ones I used in this video came from Amazon. I still don't see the 15mm M22 to 3/8 Female quick disconnect though. Obsessed garage is the only source I know.
@TUDIU
@TUDIU 2 года назад
is there a quick connect fitting that will connect a garden hose to a 3/8 high pressure hose without the high pressure washer?
@CarsWithKeav
@CarsWithKeav 2 года назад
There is no direct adapter, but you can use the following then use a 3/8 QD connection on the end. It is a 3/4 GHT (Garden Hose thread) to a 3/8 NPT (National Pipe Thread). amzn.to/3MI21wv I have included a link for the 3/8 QD plug that would work with this. You can decide in the end if you want female or male connectors. amzn.to/39jYXrY
@concerncitizen8763
@concerncitizen8763 2 года назад
Would you be able to provide a link for the hose that you recommend that have the quick connects already installed please? Thanks
@CarsWithKeav
@CarsWithKeav 2 года назад
I really like this one I have been using for a new cart build. Price is good and comes with lots of good fitting I have in this video. amzn.to/3tzDGRJ
@robertburney7199
@robertburney7199 Год назад
What brand quick disconnects do you use. I'm in the states and purchased a bunch of quick disconnects from harbor freight and they all leak so I stopped using them.
@CarsWithKeav
@CarsWithKeav Год назад
I use the best rated ones I can find on Amazon, I have them linked in the description.
@gerrymcintosh4477
@gerrymcintosh4477 Год назад
Great video thank you. I want to up grade my high pressure hose to a 50 ft length. I use a gas pressure washer 3200psi. Is it worth buying a Uberflex hose or do you have any recommendations?
@CarsWithKeav
@CarsWithKeav Год назад
I am not a big fan of Uberflex as its not as heavy and is very soft. The gray non marking one I use is heavy and lays real flat and tends to loop less than an uberflex. Neither will kink, but the lightweight of the uberflex it does tend to loop easily especially if you are nto running a swivel spray gun. Other issue I have is it requires extra adapters to work with aftermarket guns making it bulky.
@gerrymcintosh4477
@gerrymcintosh4477 Год назад
@@CarsWithKeav thanks for your reply. Could you recommend a name brand hose to consider. I also plan to install a swivel type adapter to my spray gun, because I hate fighting with hoses during operation. Thanks in advance.
@jermanehoowse4618
@jermanehoowse4618 3 года назад
Was there a link to the pw you have. Paid so much for my kranzle 1322 and have had so many issues lately that shouldn’t be happening after spending as much as I did.
@CarsWithKeav
@CarsWithKeav 3 года назад
There is, but I will put it here as well. It is a great machine for the money. Close to Kranzle numbers. Active VE52 Pressure Washer - amzn.to/3fWWqp9
@Oher58
@Oher58 3 года назад
So I have a Karcher 1700 and going to get the active. I have QD with kobrajet and mosmatic swiveling gun. All I need is to buy the 15mm outlet and the inlet? Use my existing QD for the everything else?
@CarsWithKeav
@CarsWithKeav 3 года назад
If you already have the QD on the cobrajet and a Mosmatic then all you would need is the 15mm outlet coming out of the Active. Water Hose into the front (Water Hose QD's optional) and m22/15mm male 3/8 connector out, then connect your 3/8 QD on the Cobrajet to the that. I assume you have a Female QD 3/8 on both ends of the Cobrajet? If you have any other questions you can DM me at carswithkeav on instagram and we could exchange photos to better describe if needed.
@Oher58
@Oher58 2 года назад
@@CarsWithKeav just order the active and I’m thinking the part you screwed in at 1:01 into the inlet of the active. What is that called, cause the outlet I have that all setup just the inlet I’m confused. So my water source I screw to the bib and the other end has a female qd. So I need a male what?
@CarsWithKeav
@CarsWithKeav 2 года назад
@@Oher58 Those are Garden Hose quick disconnects. Just makes life easier, but not needed. You can screw the hose bib directly into the unit.
@kyleriley1872
@kyleriley1872 Год назад
I just got a VE52 and yeah the 20ft hose is way too short haha. So my best bet is get a m22x15mm to 3/8 male QD fitting. Then get a hose and change the one end from a male QD to female QD. (So both ends are female QD) and get a upgraded gun just like in the video. Just making sure before I spend a few hundred on upgrades lol
@CarsWithKeav
@CarsWithKeav Год назад
You can get a 15mm female 3/8 for the pressure washer then the aftermarket hose male side would fit there and then you would have a female side for the spray gun. They didn’t have 15mm ones when I made this video. I think obsessed garage has them too. The new ve52 should have come with a 15mm to 14mm Ada payer as well.
@kyleriley1872
@kyleriley1872 Год назад
@@CarsWithKeav It does come with the 15mm to 14mm adapter. Do you think having that extra adapter will make a big difference with pressure or anything?
@CarsWithKeav
@CarsWithKeav Год назад
@@kyleriley1872 no, it’s only there to allow you to convert to a much more abundant m22 size. The inner diameter where the water flows is the same. With the adapter you’ll be able to use the fittings you find at Home Depot. 15mm you are stuck with Amazon or other websites.
@MrJackfriday
@MrJackfriday Год назад
I want to diy my own hose reel. Do you happen to know whats the name of the part of the hose fitting that can turn inside the wheel?
@CarsWithKeav
@CarsWithKeav Год назад
I am unsure of that name. Sounds like a fun journey to go on. Good luck and don’t get discouraged keep grinding to get it created.
@phat_gunpla_etc
@phat_gunpla_etc 2 года назад
i got some quick connects from amazon, after pressure washing..i cannot disconnect the quick connects...feels like it stuck...this happens all the time...what to do? help please. thanks
@CarsWithKeav
@CarsWithKeav 2 года назад
All of the companies that make them have slight differences in tolerance. I have some that just won't work together. I have had to use a pair of pliers and a vice to get some apart. This is where sometimes buying the highest quality helps out and trying to keep all of them being the same company such as MTM. If I get some that have this issue I try something else or they will just get stuck again. Its not a very regulated market. Another thing I noticed the other day I bought some new QD's for my garden hose. Used the exact same link and bought some more. They won't work together with the older ones that have been used a lot even though they are the same exact product. It's like they were cut on a different type of machine.
@jorgemurillo4498
@jorgemurillo4498 2 года назад
What’s the longest hose for the gun we can use for the Ryobi PW?? Thanks
@CarsWithKeav
@CarsWithKeav 2 года назад
You can up to 100 feet without issue after that you will start to lose enough PSI to be noticeable. Going beyond that is possible, but you really put more stress on the hose than the pressure washer. The longer the hose the higher chance of it getting damaged by a car or anything else. The dead weight will be cumbersome if it is a heavy hose and the start/stop timing will be influenced by the length as well. You will be waiting longer to get water and for the unit to stop. I prefer 50 ft to 75 ft. If you are using to clean the house, in my opinion if you need longer you need to bring the pressure washer to the job and lengthen the water hose from the house.
@wokeaoura
@wokeaoura 2 года назад
I am having trouble connecting my hose to my pressure washer, what would be the best hose to purchase?
@CarsWithKeav
@CarsWithKeav 2 года назад
So many variables that we would need to know. Type and brand of pressure washer, type of hose and fitting size it has, stock gun or aftermarket. I am having great luck with the following. amzn.to/3tzDGRJ Need to make sure you have the right setup for this hose to work though.
@spunkee311
@spunkee311 6 месяцев назад
Which one is the Amazon link for m22 14 to 3/8 female on opposite side? (Time stamp 8:47)
@CarsWithKeav
@CarsWithKeav 6 месяцев назад
This is what you would need one problem is they never come by themselves and are always in a set. Good thing is you need 2 to 3 of the 4 pieces to convert a 14mm m22 hose anyways. amzn.to/3tAE2M4
@santanabori
@santanabori Год назад
good video are those quick disconnect the same we use in the air hoses?
@CarsWithKeav
@CarsWithKeav Год назад
No, they are two separate types of connections. Air can only handle 300 psi normally. Pressure washer connections can handle 4k PSI normally.
@santanabori
@santanabori Год назад
@@CarsWithKeav thanks
@elijahjones8351
@elijahjones8351 Год назад
Connected a 3/8 male npt to 3/8 female swivel piece on the output of the hose reel, then I added a 3/8 female to m22 14 male fitting , and then I added on a 1/4 50 ft pressure washer hose that has M22 14 mm female on both sides. My problem is the m22 14m connected to the 3/8 male npt on the output is leaking . Small leak when just garden hose is on , bad leak whenever pressure washer is turned on . I have a video of it just in case . I think I need to put a new O ring in M22 14mm female or I need to get a new hose bc I didn’t pull it all the way through the side of the reel and it had a lot of strain . Please send me advice and help . The rest of the fittings aren’t leaking at all .
@CarsWithKeav
@CarsWithKeav Год назад
I responded to your email about this.
@elijahjones8351
@elijahjones8351 Год назад
@@CarsWithKeav THANK YOU ! 🙏
@robbienyc3102
@robbienyc3102 2 года назад
This was very simple to understand , I have not been detailing in a while but I enjoyed the information.
@CarsWithKeav
@CarsWithKeav 2 года назад
Appreciate That!
@andresyebra9559
@andresyebra9559 2 года назад
I just be an active pressure washer so I am upgrading to aftermarket hose and pressure gun so what do I need for the upgrade? can you list me everything I need please on my comment below thanks.
@CarsWithKeav
@CarsWithKeav 2 года назад
I would do the following, but this all depends on your budget. Some of the fittings you wont need, but they come in pairs most of the time so you got extra stuff if you try to add anything else. Pressure Washer Hose - amzn.to/2WEaD2M MTM Swivel Spray Gun Fittings installed - amzn.to/3dTuKPh 3/8 Stainless Quick Disconnect - amzn.to/3ijQW8b M22 15mm Fittings - amzn.to/3zYNA09
@dtna
@dtna Год назад
Thank you! I could never figure this out. I thought I was a dumbsh*it.
@CarsWithKeav
@CarsWithKeav Год назад
I started out the same way. RU-vid helped me. 😂
@paulmelanson1527
@paulmelanson1527 3 года назад
Omg what size garden hose is that and where did you get it
@CarsWithKeav
@CarsWithKeav 3 года назад
It's an RV camper hose 1" amzn.to/2BidN1m
@SNieX0
@SNieX0 3 года назад
Keav - please send or share link for the BMW Shirt brother!!!!!
@CarsWithKeav
@CarsWithKeav 3 года назад
Hit up my boys at bmwinvasion.net/
@joeolvera1
@joeolvera1 Год назад
What is needed to connect a foam e to a regular water hose please help
@CarsWithKeav
@CarsWithKeav Год назад
A foam cannon for a pressure washer will not work with just a garden hose. Not enough pressure to create foam. If it’s a garden hose foamer they should come with the quick connects to hook it up or it will work directly with the garden hose thread.
@joeolvera1
@joeolvera1 Год назад
@@CarsWithKeav good to know thank you so like chemical guys sells one for just a hose that one should be good right
@misteralmeida86
@misteralmeida86 Год назад
I’m over here trying to disconnect the male fitting from my Kobra hose and I give up. Buying a new hose 😂
@CarsWithKeav
@CarsWithKeav Год назад
It takes some brute strength and lots of leverage to get that off. They use lots of loctite. You could get the female m22 adapter and use on the pressure washer so you can use the hose the way it’s intended.
@misteralmeida86
@misteralmeida86 Год назад
@@CarsWithKeav I was considering that I’ll give it some heat tomorrow and if it doesn’t work, I’ll go with your suggestion. Thanks and subbed!
@CarsWithKeav
@CarsWithKeav Год назад
@@misteralmeida86 Thank You, I had two crescent wrenches and pinned one to the ground and put all my weight on the other and didn’t budge. I ended using a long socket on the end and a breaker bar on the fitting. Used a good sized wrench to pin the hose to the ground. Actually came off pretty quick that way.
@chefjamesmacinnis
@chefjamesmacinnis 2 года назад
MTM makes a M22 15mm female QD
@CarsWithKeav
@CarsWithKeav 2 года назад
Funny thing they started making it just after I made that video. LOL Obsessed Garage sells them as well now.
@chefjamesmacinnis
@chefjamesmacinnis 2 года назад
@@CarsWithKeav obsessed garage actually has a 4 year old video where they were selling M22x15mm sourced from Michigan
@kiranhundre5350
@kiranhundre5350 2 года назад
Can find the attachment in India
@10SecondZ06
@10SecondZ06 2 года назад
I have a Mrliance electric power washer with it's own reel that comes attached with it (model MR-AMD005266). I want to replace the hose with a M22 14mm hose. The stock hose is the same style as the M22 14mm but it is much smaller (same style with the inner piece with o-ring on it) but the inner part is probably 10mm instead of 14mm and the outter part is much smaller than M22 . Do you know what size that may be? Are there any adapters that will convert that to M22 14mm or to a quick connect? The stock gun has a similar connecter too and is made for the hose connector to have the inner piece with the o-ring just like the M22 14mm but smaller. I'd like to put a quick connect on the gun so I can use it for sidewalk cleaning and use my stubby aftermarket gun for the car.
@CarsWithKeav
@CarsWithKeav 2 года назад
That smaller connection I have seen and as far as i know I have not seen an adaptor for it. I looked at Amazon and saw the connector going from the unit to the reel looks like an M22 14mm, but I am unsure. You trying to replace just the hose or the reel? I don't think that reel could handle a decent hose. A lot of these Amazon units from China have connections that there is no way to add aftermarket parts. If you can DM me on Instagram with some pics or video and I could help out more.
@10SecondZ06
@10SecondZ06 2 года назад
@@CarsWithKeav also, I wanted to let you know that your social links in your description are outdated and don’t work. It’s linked to heidi_the_335 but doesn’t work or redirect. I did find you by searching carswithkeav though.
@CarsWithKeav
@CarsWithKeav 2 года назад
@@10SecondZ06 Thank you, so many descriptions to update after making a name change. 😂
@10SecondZ06
@10SecondZ06 2 года назад
@@CarsWithKeav thanks for the reply. I’ll DM you on. I’m DansMuscleCars. The connection on the bottom of the machine that connects to the reel is M22 15mm. I want to still use the reel but I am temporarily just connecting straight to the machine with a M22 15mm quick connect for that with 3/8 plug so I can just plug my new M22 14mm hose, with 3/8 female quick connect to it. The reel on this unit is very sturdy and well made. I’d like to still use it if I could figure out that fitting size and buy an adapter to M22 14mm or adapt it to a 3/8 male plug quick connect. I have the reel all taken apart so I’ll send pics or a video of it on IG later today. Thanks
@harrynazarian3184
@harrynazarian3184 2 года назад
How about swivel joints to avoid kinking hoses?
@CarsWithKeav
@CarsWithKeav 2 года назад
The SGS28 gun I had in the video had a built in swivel. If you are looking to add you just need to know what the threading is at the bottom of the gun. Whether its female or male and then you would need a quick connect at the end whether female or male to match the swivel. then you can quick connect to the hose. If you have any trouble reach out to me on Instagram I have a swivel I could show you some pictures.
@harrynazarian3184
@harrynazarian3184 2 года назад
@@CarsWithKeav I do not use Instagram since I got hacked, so i just closed my account. I know the SGS28 gun has the swivel joint connection, but I was wondering if the joint is available by another party that we can modify our gun with.
@CarsWithKeav
@CarsWithKeav 2 года назад
@@harrynazarian3184 With the stock gun or with an aftermarket one? I could post a link here to the one I have for my old setup. There are lots of swivel options to add to a non swivel gun.
@harrynazarian3184
@harrynazarian3184 2 года назад
@@CarsWithKeav Yes sir! Anything other than the SGS28. I have a gun that similar to the ones you find on Amazon. The gun I bought was from Advanced Auto, that came with a foam canon. It has a threaded base and quick connect head for the nozzle (also standard). Surprisingly, this gun and foam canon perform as good, if not better, than my Griots or MJJC canons and much cheaper! LOL! The soap control at the top is reversed (the - sign give more soap, and the + gives less soap). But other than that, it performs VERY well. I'm going to be upgrading my hose soon, to something less annoying (the Greenworks hose is complete garbage and kinks a lot). But I figure for now, I can install a swivel joint on my Autocraft gun. Any links or info you can provide, I'd be very appreciative! BTW, I see you're a BMW guy as well! :D
@joeperez6241
@joeperez6241 Год назад
What kind of garden hose is that ?
@CarsWithKeav
@CarsWithKeav Год назад
It’s a 1 inch RV lead in hose I found at Northern Tool. I don’t use it anymore it’s just too big for what I need.
@danielshallberg9266
@danielshallberg9266 Год назад
Is there a m22 15mm all stainless steel?
@CarsWithKeav
@CarsWithKeav Год назад
I don’t know of any full stainless steel. The M22 section is brass on every one I’ve seen and many do have a stainless plug for the 3/8 QD connection.
@CarsWithKeav
@CarsWithKeav Год назад
I actually just found some, but it’s part of a nice kit of QD’s. amzn.to/3AG1EyN Here you go all 304 stainless even the threads on the M22.
@danielshallberg9266
@danielshallberg9266 Год назад
@@CarsWithKeav this is basically what I want but… it needs to be 15mm I have the ve52
@CarsWithKeav
@CarsWithKeav Год назад
@@danielshallberg9266 Only way I see to do that is a 15mm to 14mm stainless adapter
@pullingthestrings5233
@pullingthestrings5233 Год назад
16:15 that's actually a male npt
@CarsWithKeav
@CarsWithKeav Год назад
Yeah, I made a mistake there. I start talking faster than my brain sometimes. 😂
@pullingthestrings5233
@pullingthestrings5233 Год назад
@@CarsWithKeav I'm guilty of that also 😂
@longtime3941
@longtime3941 3 года назад
You running from a water tank?
@CarsWithKeav
@CarsWithKeav 3 года назад
City water from the house is what I use.
@JadeaRS4
@JadeaRS4 3 года назад
1.2 gpm. No point in review. Terrible for cars.
@CarsWithKeav
@CarsWithKeav 3 года назад
Its a dead unit, just using to show a 14mm M22 fitting for the video. Would never review it, but if you change orifice sizes you can get it to 1.4 at 1k PSI
@jermanehoowse4618
@jermanehoowse4618 3 года назад
Terrible for cars? Why do you think that? You don’t need that much water or pressure to clean a car unless you’re trying to strip the paint.
@paulsimin-gv6jj
@paulsimin-gv6jj 2 года назад
pathetic review etc...
@CarsWithKeav
@CarsWithKeav 2 года назад
May I ask what is being reviewed? Because this is not a review video. Title clearly states it’s explaining all the connections.
@paulsimin-gv6jj
@paulsimin-gv6jj 2 года назад
all waffle waffle no substance terrible review etc
@CarsWithKeav
@CarsWithKeav 2 года назад
What review and where in the video or title does it say it’s a review? Video is simply about all the connections you may deal with when upgrading a pressure washer system. Honestly asking because I am confused at this statement.
@eagle1hd
@eagle1hd 3 года назад
Perfect video buddy thx. I'm literally doing all these mods. I bought a simoniz 1650 (active ve51) and then did an upgrade kit of hose gun and cannon. Now I just need to add the QCs.
@CarsWithKeav
@CarsWithKeav 3 года назад
Nice, that is a great setup and wall mountable. You can't beat that or the value.
@eagle1hd
@eagle1hd 3 года назад
@@CarsWithKeav thx. Yeah I'm looking to wall mount for sure.
@kiranhundre5350
@kiranhundre5350 2 года назад
Can find the attachment in India
@CarsWithKeav
@CarsWithKeav 2 года назад
I'm unsure of what is available in India.
Далее
Would you help?!😳
00:32
Просмотров 5 млн
впихнул турбину в глушитель
1:00