ALWAYS Do This To Your CARPENTRY + WOODWORKING Projects! (How to SQUARE UP Cabinets/Floors/Walls...)

Подписаться 859 тыс.

Просмотров 355 тыс.

50% 1

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Rockler Clamp-It Corner Clamp:
amzn.to/3FLfXlB
Right Angle Alloy Clamps:
amzn.to/3tL5nc4
Porter Cable 20V Brad Nailer:
amzn.to/3rBZafO
Stanley Powerlock 25' Tape Measure:
amzn.to/3fEhDTo
PowerTec Wood Handle Try Square:
amzn.to/3GRJXxt
Dewalt 10" Compound Miter Saw:
amzn.to/3nFgEH2
(PLEASE NOTE: These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
Check out our other CARPENTRY BASICS Vids:
Face Frame Trim Secret:
• #1 TRIM SECRET--This I...
Flush Vs. Proud:
• What Does "FLUSH" Mean...
ALWAYS Do This To Your CARPENTRY + WOODWORKING Projects! (How to SQUARE UP Cabinets/Floors/Walls...)
Understanding "squareness" is one of the most important parts of becoming a good carpenter or woodworker. This short video from The Honest Carpenter will explain what "square" means in carpentry and construction, how we determine if something is square, and how we keep it square!
As I mentioned in my "Plumb, Level, Square" video, the word "square" in construction simply means two lines, components or objects are sitting at a perfect 90-degrees to one another.
Building things square is massively important in carpentry, because elements built out of square will impact later phases of work that are built upon the first.
To determine square for very small objects like little boxes, you can just slide a TRY SQUARE into an interior corner and make sure both legs of the tool are touching the material evenly.
For anything slightly larger like a cabinet, it's better to "pull diagonals" or "pull corners" to see if something is square.
Hook your tape measure onto one corner and pull to the opposite outside corner--note the measurement. Now pull from the other corner on the same side to the other opposite corner, and note that measurement. If the numbers are different, then your box is OUT OF SQUARE!
One corner is probably squeezed in, meaning that the other corner on that end is being pushed out. Rack the box back into shape and pull corners again until the numbers match up.
On very large structures like floors and walls, it's best to use the 3-4-5 METHOD. Pull three feet on one leg of the structure and make a mark at 3'. Then pull 4' out the other leg and make a mark. Now measure the distance between the two marks. If it's 5', then your structure is square. If it's not 5', then your structure is out of square--shift it into the right shape.
Once you have an object squared up, brace it by shooting a scrap piece of wood across two adjacent legs, locking the shape into place until glue dries, or your finished building!
Thanks for watching!
The Honest Carpenter

Хобби

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 628

@marykayryan7891 Год назад

When I was a child (many years ago) girls were not allowed to take the class called "Shop" in high school. That was where one would have learned all the basics of carpentry and tool use. So now at almost 70, I am trying to learn all of what was withheld from me then. Thus, I LOVE that your videos are very basic and cover proper tool use, tricks, safety issues. This one in particular about "squareness" was fantastic precisely because it did not assume a lot of prior knowledge. Thank you and keep it up. I am working my way through all your old videos and look forward to new ones. (How much do we love the internet?!)

@franceswatts4001 2 месяца назад

Me too! Although I AM 70 😂

@marykayryan7891 2 месяца назад

My age exactly.@@franceswatts4001

@justinroberti1041 11 месяцев назад

As an amateur with woodworker, i typically feel overpowered with the entire arrangement ru-vid.comUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!

@skigglystars9525 2 года назад

So it's good to be square. Thanks for sharing your knowledge.

@patrickpolizzi7 2 года назад

Oh, one more thing. Thanks for the videos. You cover things that really make a difference. Like the kerf, or the reveal. Freaking light bulb moments.

@N0beefstew4u 2 года назад

Your videos have really helped me with my desire to start wood work as a hobby. Growing up I always wanted to help my father (Who was an amazing carpenter) with more technical work. He always wanted me to go to college and have a desk job. I joined the Army instead. lol Sadly, cancer took him recently and I inherited the majority of his tool collection. I've been watching many of your videos while deployed for tips of the trade so I can get better at finish work. Sorry for the depressing comment, just wanted you to know that your content and the way you explain things is incredibly helpful. Cheers.

@natehoover5266 2 года назад

Now when anything is out of square, I'm going to say, "Man this is like a Tim Burton house!' LOL.

@noreenjames1392 2 года назад

😂👊🏻

@mfmr200 2 года назад

so many woodworking youtuber say to check for square, but none make videos for what to do when it is not square.. tq for making this video.

@TheHonestCarpenter 2 года назад

Thanks John! Been wanting to make this one for a while 🙂

@Gazman299 2 месяца назад

What really helped me up my game with checking my squaring tools was getting a solid Machinist Square 8 x 5-1/8 Inches (200 x 130 mm) DIN 875/1 (Square w/in 20 microns or 0.0007 Inches) for under $30. from Amazon, and then a larger size for checking my T-squares. I've been very much enjoying your videos, you are a very bright young man. Thank you.

@joshuajackson1926 2 года назад

I love your channel. Im a seventh grade science teacher who lives in a wooden house built in the 30s. Not enough spending cash to pay a pro properly so Im a DIY’er by necessity. Ive learned a ton from your youtube channel. From one educator to another: bravo!

@TheHonestCarpenter 2 года назад

Awesome to hear, Joshua! Thanks for watching, and work safe 🙂

@brentiers 2 года назад

The proper use of the internet for an autodidact has made schools almost completely useless. There are some exceptions, but if you're not after a piece of paper that tells the world how smart you are you can learn anything online.

@jefff6167 2 года назад

Thanks for these “101” videos. So many DYI content produces assume viewers already have this basic knowledge. 👍🇺🇸

@tomhart5465 2 года назад

"If it's not square it'll be leaning like a Tim Burton house" lol!

@number1pappy 2 года назад

I remember high school wood shop teacher who taught us that ,"if you can make a true square " you can build anything correctly! He was so right! One of the first lessons we learned was how to make a perfect square. Our teacher graded us aggressively! Lol! He also taught us how to correctly use a "speed square " and all its features! These two things alone has helped me tremendously throughout my life.

@robertsheward9336 2 года назад

Unfortunately not too many high schools have wood shop anymore!

@number1pappy 2 года назад

@@robertsheward9336 I know! It's beyond sad...

@gwb8445 4 месяца назад

In the 70's I took wood shop. We made large wooden spanking paddles and walked around school swatting other students. We drilled holes in the paddle so it stung more!😮 Nothing square about them.😊

@number1pappy 4 месяца назад

@gwb8445 lol! Yeah, we as students were not allowed to make paddles. However, the shop teacher did make the vice principal a wood paddle with holes in it, and it had "board of education" engraved on it! It sat on a custom-built holder on the wall behind his desk. Corporal punishment was alive and well in the 80s in Texas, where I grew up. They can say what they will about paddling kids in school, but we never had school shootings, and our Schools were not full of disrespectful entitled punks. We even had student driven pickups with rifles in gun racks in the student parking lot. We even had a school sponsored shooting club. With all that, not one negative incident with guns ever. Makes one wonder what went wrong in society nowadays 🤔.

@MoranGuyVideos 6 месяцев назад

one of the most important video on youtube in the woodworking channel area. thanks.

@K31swiss 2 года назад

I remember our 10th grade math teacher telling us boys we would need this if we ever built a house. After 50yrs of laying out foundations and building everything from coffee tables to nuclear plants I’ve always said this was the most important thing I learned in school.

@williamruddell6819 5 месяцев назад

The success of any project begins with and grows from an application of “Basics” Great video topic and illustrations - well done!

@duanewilliams7676 2 года назад

All these methods is good for sheet metal projects,pipe fitting,plumbing even guitar making

@henryheinbuch 2 года назад

The simplest things are always the most important.

@thefack149 2 года назад

I like how you called it the pythagorean theorem of right triangles. Pythagoras is my homeboy

@reverendronsrevelationroom1405 2 года назад

The 3,4,5 method is something I've witnessed more experienced carpenters use but never explained. They did it so fast that it just seemed like magic lol

@scgear3847 2 года назад

Thanks, I knew all about the 3-4-5 triangle, but never thought of using it like that. I also like the trick about nailing a temporary brace once you have it square. Really great content; there are a lot of flashier wood working videos with big sponsors making a lot of money off of them, but yours always feels like I am learning something from someone on an actually job site. The minute I see a new video from you I always watch it. Great job.

@TheHonestCarpenter 2 года назад

Thanks SC! That’s pretty much exactly how I learned, so I’m really glad it comes through that way 🙂

@markfischer6850 2 года назад

Same here! I never thought of using a 3-4-5 right triangle like that. Thanks!

@timan2039 2 года назад

I learned much of this from my great grandfather and the rest from my grandfather. Always good to pass on knowledge.

@McEddModzHD49854 2 года назад

This is what we were taught in engineering too and other uses stuff that carries over to woodworking too

@kennethmiller2333 2 года назад

I didn't know there was a term for pulling corners, but it's something I did a lot when I was a Damage Control Petty Officer - making sure our quick acting water tight doors were square in their frames. Granted, if they weren't, it was a job for the shipyard, not for us... but the idea still was the same. Rather than a tape, we used two strings and measured them. We also made sure the strings touched in the middle to make sure the two diagonals were in the same plane - meaning the door frame (and door - same idea worked) wasn't warped.

@waynesligar5948 2 года назад

I really think you are helping people. I wish i could do videos to help people I'm just not good at talking and now that I'm hurt i can't do much anymore. I loved working in construction and figuring out ways to fix things

@haukefrahmann7849 2 года назад

going to school, learning all that math stuff... and NEVER thougt about a handy thing like 3-4-5 .... THNX!!!

@lizzinlife 2 года назад

I’ve needed a video like this for a year. Thank you.

@neiloconnor4124 2 года назад

Well done explanations and illustrations. "Oblique" reference should be "obtuse" in that an oblique angle is an angle that is not a right angle or any multiple of a right angle. Both acute angles and obtuse angles are oblique angles.

@stuckinmygarage6220 Год назад

Nice! 👍 A

@TroyStein 2 года назад

I have been looking for a straightforward video like this for forever! Thank you!!!

@mikepalmer2219 2 года назад

This is one of the most important things in most any kind of construction/building/fabricating etc..

@isstuff 2 года назад

I am building out a camper van, while nothing is square, my joinery will need to be. Thanks for reminding me just how important it will be.

@carloantoniomartinelli5418 2 года назад

This carpenter is not just honest, but very intelligent as well and wonderfully articulate. This video explanation would have to be one of the clearest , simplest and most to-the-point that I have ever seen. Thank you sir and so long.

@HopeStreetWoodworks 2 года назад

This is the video that EVERY wood worker or carpenter needs to see. I think this should be the very first thing that someone should know.

@OldManZeke1969 2 года назад

Thank you for this video. Sometimes the little things are the biggest pain in the ass.

@beverleythomas5708 2 года назад

Again I learn something new. You keep your videos coming, and I'll be watching them. 😊

@gizmorow21 2 года назад

The Best Teachers are not the ones that know the most, but the ones that cause the most to know. Great job.

@michaelbradford4444 2 года назад

Square and Plumb...a framers motto.

@michaelwebb4500 2 года назад

Ethan you are a genius. This is so important and you showed how it can be done easily.

@ademkollari8992 Год назад

Very good explanation for starting DIY-ers. I have recently started down a rabbit hole: from researching to replace my aging makita rotary hammer and b&d drill, to watching carpentry videos. Seems like a great place to start. Thank you!

@garykorzelius5930 2 года назад

This is definitely an important part of woodworking. My Grandpa was a cabinet maker and before I could build anything I had to build a square box! I finally did after many tries and to a 11 year old that seemed like forever. Tell someone to do this and they think no problem, but believe me it is harder than you think.

@nohomo4774 Год назад

that sounds really cool! my pappy was never close to me (he lived in another country) so I admire your Grandpa's effort 👍

@vociferonheraldofthewinter2284 2 года назад

One of my favorite kinds of videos to watch are finish carpenters fixing all of the mistakes of the builders and/or time. Just a slight settling of the foundation can make a HUGE difference when it comes to placing trim. I've seen some old houses with HORRIBLE issues. Try to put in cabinetry that goes almost up to the ceiling when the ceiling is way off kilter. It's an art to make it work. This has always been a lingering question in my mind. When the structure is out of square and out of level do you match the lines of the house to continue the illusion that it's consistent or do you go with plumb, level, and square despite the fact that it'll be glaringly obvious.

@tonyd2776 2 года назад

You described my diy problem solving process on every project I’ve ever built to a tee

@jhoodfysh 2 года назад

Thanks Ethan, my woodworking will be much better now.

@JackKirbyFan 2 года назад

I smiled seeing that as I helped both my kids with geometry. Ya the 3-4-5 is the Pythagorean triple which are numbers you memorize for different triangles so if you don't want to use the Pythagorean equation you just memorize those numbers. There are a lot of them but multiples of 3-4-5 is the one every geometry student has to endure (I mean enjoy memorizing). Second, those diagonals take advantage of another geometry property. The diagonals are the same in any quadrilateral which all sides are 90 degrees (in other words, rectangles and squares) You can take a deep dive if you want but I thought it was fun to see Geometry applied in a practical way instead of on a chalkboard. Nice job!

@TheHonestCarpenter 2 года назад

That’s the explanation I was looking for, Dave 😆

@bethanythiele562 2 года назад

Always love when trigonometry we teach to kids is practically used!!!

@WardHammond 3 месяца назад

Just what I needed. I'm building a king-sized bed platform with storage and the drawers need everything to be square in order to slide in and out properly.

@David.M. 2 года назад

Thanks Ethan. I always enjoy your videos and learn something.

@druegillis1744 2 года назад

It may see like wasting time to check for squareness, but as you say, it is a time saver in the long run. Great information for new woodworkers and a timely reminder for us old guys!

@hughsolorz5184 2 года назад

Like a Tim Burton house. Too clever. What keeps me watching

@TheHonestCarpenter 2 года назад

😁👻🏡

@philgoulding5219 2 года назад

Great video Ethan! I’ve been a woodworker for nearly 70 years and your point on squareness in “ a gold standard” rule!! Most of my more recent projects have been smaller so squares inside and out work well. The cross brace is very helpful. Love the 3,4,5 method for larger projects. Your points are very important and so we’ll presented. Keep up the great videos! Many thanks!

@jhans3278 2 года назад

Thanks Ethan. Good review.

@TheHonestCarpenter 2 года назад

Thanks for watching, JHans!

@qaweeorltuys 2 года назад

There's a whole separate level of carpenter that works on old houses that works with "out of square" to make thing "work right." It's kind of amazing to know which references to follow and which references to work around

@TheHonestCarpenter 2 года назад

Very true, Seth. I’ve lived and worked in two historic neighborhoods. Every remodeling step starts with, “So what’s wrong with THIS room…?”

@Sportyg1960 Год назад

Oh man I am learning THANK YOU SO MUCH I Started this “woodworking “ after I retired and AGAIN THANKS TO YOU (I AM LEARNING SIMPLE TAKE YOUR TIME DON’T GET EXCITED SO DOWN THINGS) LOL

@Goalsplus 2 года назад

Thanks. Basics can't be repeated (or reworded) too often.

@fmphotooffice5513 2 года назад

Excellent, concise presentation.

@jbylin 2 года назад

This is great. A good refresher. I’m saving this to show to my 12 year old who is starting to help in the shop and build his own things.

@ww89 2 года назад

I was wondering why woodworkers always checking and re-checking for 90 degrees. Now I know why. Thanks Ethan !

@johnleonard5857 2 года назад

A(squared) x B(squared) = C(squared). It’s math baby. Great video

@davedeatherage4902 2 года назад

I think it's a great important video! Thanks, beginner DIY'er. Math is so important, it's in everything.( Until this video, I didn't understand the importance of being square in you're work.)

@johnkelley9877 2 года назад

This was some really good and useful information. Thanks for sharing this.

@TheHonestCarpenter 2 года назад

Thanks John!

@bobfp910 2 года назад

Very clear. Nice job. For anyone that is a beginner, remember, opposite sides must MUST be the same length. Repeatability is key. Making multiple boxes requires the use of stop blocks to ensure lengths are the same. On large cases check the backside for square as well. If you don’t have a tape measure, use 2 sticks long enough to cross on inside of box from opposite inside corners. Put face to face. Mark a line across both on edge were they overlap. Use sticks and check the opposite diagonal corners. If square the lines on each edge should line up. If not adjust as needed.

@n8sot 2 года назад

Great topic!!!!! This should be discussed more!!!!!!!!!!!!!!!

@ScottyDrake 2 года назад

Clear. Concise. Thorough. I hope every new woodworker sees and heeds this video.

@positivelyportugal 2 года назад

Ah ha! the old 3-4-5 trick! Thanks!

@vilod 2 года назад

Basic info at an easy to digest pace. Thanks again.

@jasonhanson6563 2 года назад

Gotta love that 3-4-5 method.

@dwayne7356 2 года назад

Building small square boxes took me a long time to learn. Tip one, view the video on saw kerfs. Tip two, use a sharp pencil and learn to hold the pencil and mark the boards the exact same way. Use stops on your saw if you can instead of measuring each board or trim to the final length as a group if you can. Check everything along the way. You would be surprised what happens if your blade is not square to the table. A little 1/32 th gap becomes 1/16th when mated to another piece at times. The smaller and more detailed the project, the less forgiving it seems to me. Sometimes it is better to take the lost instead of trying to make it work.

@TheHonestCarpenter 2 года назад

All very good points, Dwayne, especially how mated mis-cuts will compound!

@keithmarlowe5569 2 года назад

The slightest deviation in angle grows further apart over distance, and the slightest deviation over short distance sticks out like a sore thumb. Ever see a poor tile job in a shower? An 1/8th inch off on a shower wall does not hide like in a long hallway

@keithmarlowe5569 2 года назад

And thanks for the tips. I need to upgrade my marking instruments for sure. World of difference between framing lumber and wood for wood working

@douglasreid699 2 года назад

I build flooring cassettes in the UK, usually the drawing has square size on it in millimeters, some if the flooring cassettes are up to 10 or more meters long. But sometimes the timber is wet and has expanded or its not a rectangle or square shape so only one square size, so i use the handy man app which has lots of different calculations in it but one is 3-4-5 rule, you put your dimensions in and click convert and it tells you what it should be. Square it too before putting dwangs or noggins in as easier to do rather than belting it with a sledge hammer to get it square again lol

@smirkinatu5512 8 месяцев назад

Thank you for recording and posting this valuable educational video.

@user-ep3iz4lb4z 2 года назад

Very informative and useful. Looking forward to the next video. Thank You.

@keithvance3638 2 года назад

Got the wood cut for a homemade arcade machine this is great advice. I am a very amateur wood worker whose expertise is electronics, I want it to look as good in real life as in my head.

@joshcowart2446 2 года назад

It’s amazing how many problems an out of square foundation can cause. I’m a plumber. When we’re putting drain lines under a slab we use the forms as a reference. If they aren’t square our measurements may be off. Then we may have pipes coming up halfway outside walls. This can cost lots of money to fix. I don’t do many rough ins these days but when I did, I’d always check the forms for square. If a pipe comes up in the wrong spot, you have to jackhammer and move the pipe or furr out the wall. Both of these things cost time and money. So if I can’t get accurate locations because of forms then I don’t want to be responsible for the plumbing being off.

@Bigelite094 2 года назад

Very important to check your squareness when building on a foundation. You can pull diagonals, be perfect, but a wall can be bowed. Can happen too once you start stacking your roof and a wall bows out. Every once in a while, check to make sure you're still square, true, and plumb.

@csimet 2 года назад

Agree. We all know foundations are poured square and plumb! ;) LOL. Some walls of mine are nearly 1" out of plumb over their 7" height. Found that out when I started to frame the concrete walls of my basement. Check everything, more than once, as you go.

@DJtheLoungeLizard 2 года назад

I haven't found a square wall in my house yet. And every house that I've seen that is over 20 years old is the same. Wood moves. Dirt settles. Concrete will crack or sag slightly (or more). Today all neighborhoods dig dirt and move it out to level areas. Then, bring in dirt to move the houses back up above the street level. Time goes by and the dirt settles, etc.

@brucea550 2 года назад

@@DJtheLoungeLizard You’re confusing dirt and gravel. Dirt, called overburden, is bulldozed off because it’s not good to have under a slab or foundation. Then gravel is brought in to raise the final grade.

@jeffburtonnottheracecardriver 2 года назад

@@brucea550 is the gravel compacted, or will it settle a little?

@brucea550 2 года назад

@@jeffburtonnottheracecardriver compacted, always!

@lucky13farms99 2 года назад

Thanks for the solid explanation. Fought a small pig house for hours. Till I realized my cheap chopsaw had slipped out of square. Got it done but had to recut some of the main structure supports. Thankfully the pigs did not mind.

@nedkelly5866 2 года назад

Some good advice there 👍 Might help me stop being such a 'best fit, sand off the edges, and filler in the gaps' bodger.

@rickfarber4243 2 года назад

Thanks for another terrific video. I particularly appreciate how you illustrate the importance of high school math in practical situations. As a former math teacher, I would've loved to use these videos as teaching tools.

@madeinyorkshire2203 2 года назад

I hope you don't use the descriptor "4 sided diamond" for a parallelogram with your students! 🙈😀

@derekbaker8791 2 года назад

Nothing better that a squarely built cabinet carcass! Loads of good tips for the impatient like me here :)

@rbhillner 2 года назад

I like the way you have explained things in layman's terms. Easy to understand, to follow, and to duplicate in the field. Thanks.

@Andrea-bw8xm 2 года назад

Thank you Thank you Thank you! I have always known how important it is to be precise with squarenes...these tips you provide are great. Keep them coming!

@TheHonestCarpenter 2 года назад

You’re welcome, Andrea! I’ve been wanting to make this one for a while :)

@catfishmudflap 2 года назад

The 3 4 5 method of square is my choice rather than measuring the diagonals. This is always and informative and well done show.

@CF542 2 года назад

I've learned more from RU-vid on DIY than I could have on my own. Content like yours literally has saved me hundreds if not thousands of dollars.

@TheHonestCarpenter 2 года назад

Thank you, CF! I’m so glad it’s helpful 😄

@johnlp3376 2 года назад

This is really a great video , no it's not a hot or flashy topic. But you said it. Its the 1st basic to everything you build. 90% of the projects that I've had trouble making this was the problem and normally it starts out small and just grows and grows as you get further along in your project. It's the rule for how your tools should be set up , how you should try to mill your lumber. Taking the extra time to check everything saves time and headaches.

@pateramat 2 года назад

"visibly lean like a Tim Burton house" lol!!

@ivansmith654 Год назад

Great video, it is good to brush up on things like this! I live in France in an old castle but their build a new building within the castle and to do that the new building is total not square by almost half a foot and believe it or not I have seen buildings with over a full foot out of square and still standing! I am Franco-American building engineer trained and worked state side, I only did this trade state side; this building is a price of art; getting it in here within two older building of over hundred years old I am only half French, and I don't know how it was done!

@TheHonestCarpenter Год назад

That’s amazing, Ivan! 🇫🇷 🇺🇸 👍

@lonniecrook1684 2 года назад

Great video of a basic, critical, woodworking premise!

@alexanderd.m.565 2 года назад

This is pure wisdom, thanks a lot for all these tips and wizardry, definitely saves the day

@dannymurphy1779 2 года назад

You can get a little gizmo you hook your tape onto for those diagonal corner measurements, they are very cheap and a real help.

@jayclyde6045 2 года назад

I have a few grandfathers and great grandfathers who were carpenters. My great grandfather recalled a house being so out of square that the house literally had five (5) walls to it! The fifth wall was said to be around a couple feet long and at an angle to close out the finished house!!!

@lauramarshall6376 2 года назад

Great use of Pythagorean theorem. Excellent video.

@siulseyer8053 2 года назад

Outstanding. Howdy from the great Republic of Texas

@CP-mb7ly 2 года назад

Thank you for this awesome video! You're a natural teacher!

@martinoamello3017 2 года назад

Easy square clamping pieces..cut pieces of plywood exactly square then turn into triangles. Use a hole saw to put clamping holes wherever you want them. Personally I like to clamp with those table saw fence clamps and drill 3/8" holes in the plywood..works great..

@dockjm 7 месяцев назад

Excellent! Reminds me of my old carpenter friend's adage... "Framing IS finish".

@TheHonestCarpenter 7 месяцев назад

That’s a great quote, dock! Everybody’s job down the line will become easier or more hellish depending on how good the framer is. 😁

@feuby8480 Год назад

this vid just came on point. I was gonna build a bed frame tomorrow... I was wondering how to get the squareness right, i had some methods in mind (angle, and everything) but you greatly helped me. with diagonals and 3-4-5. The fact that you put some diagonals during assembly will also greatly help me in the future. Thank a lot

@maxximumb 2 года назад

Great timing, I'm making some boxes that are larger than my normal projects. Good reminders to make sure everything is square from the start.

@TheHonestCarpenter 2 года назад

Always good to check, Maxx! 😄

@arajalali 2 года назад

Ethan you never disappoint. Awesome video. Really appreciate it.

@TheHonestCarpenter 2 года назад

Thank you, Arash! I appreciate the support 😄

@congapilon 2 года назад

Nice 👍🏼. A^2+B^2=C^2. Where C is the hypotenuse of the triangle. Setting the equation = to C means Taking the Square Root of the sum of the squares of the other sides.

@barrelcooper7411 2 года назад

Tenacious D-iyer! I love it

@maryb1618 2 года назад

As a math major and novice woodworker, I loved this video and your use of all the correct terms - plus parallelogram is a great word! I have implemented so many of your lessons, thank you so much for your videos.

@rayheinrich1504 2 года назад

outstanding now I know what i have been doing wrong all these years

@richardpender2428 2 года назад

The number of times I have discovered that a project I was working on wasn't square but carried on regardless. At least now I have a fantastic reference point and hopefully no more not so square squares.

@yuliyabryant4052 2 года назад

This rule explains so much to me, my mind has blown away. I recently made my first wooden box and encountered this problem and for the life of me couldn’t figure it out. Now I know what went wrong and will use this rule from now on. You are very helpful. Thank you for your videos.