AMAZING Extrusions in SketchUp with Extrude Tools - ALL TOOLS EXPLAINED! - Extension of the Week #47

Подписаться 523 тыс.

Просмотров 298 тыс.

50% 1

In this video, we go through all of the tools included in Extrude Tools - TIG's amazing extrusion extension for SketchUp!
Want to Support the SketchUp Essentials?
/ thesketchupessentials
www.thesketchupessentials.com/...
DOWNLOAD EXTRUDE TOOLS - sketchucation.com/pluginstore...
DOWNLOAD WELD - extensions.sketchup.com/en/co...
The cool thing about Extrude Tools is that it allows you to extrude lines, rather than faces, giving you a whole series of new modeling options.
What I wanted to do in this video was just run through the different tools and explain how each of them works.
Extrude Edges by Rails -
This allows you to take an edge and use other edges, or rails, to extrude it. You can use a 4th profile (a “Melding Profile”) to direct the final direction of the extrusion
Options will include reverse faces, reverse rails, quad faces, and delete original edges.
Extrude Edges by Rails to Lattice -
This works in a similar fashion to Extrude Edges by Rails, but then allows you to create a lattice from the resulting faces
Extrude Edges by Rails is very similar to the face creation by curviloft - you can select a series of lines, then generate a face with them. You can adjust the number of segments, and if the faces that are generated are quads or not.
Extrude edges by edges will take 2 groups of grouped edges and use them to generate a face by extruding 1 along the other.
Extrude edges by vector allows you to take an edge and extrude it in any direction you want.
Extrude edges by vector to object allows you to extrude multiple items and intersect them with a face.
Extrude edges by Lathe will allow you to rotate an edge in a circle, much like extruding a face around a circular shape with the follow me tool .
Extrude edges by face will take a flat face that you’ve drawn and extrude it along any edge you select. Theoretically works on multiple paths at once.
Extrude edges by faces will merge two faces along a rail, similar to curviloft’s loft along path function
Extrude edges by rails by face will extrude a flat face along a series of rails created by curves - confused yet?
Extrude by offset - create face from a line based on a defined thickness
MY RU-vid SETUP
kit.co/TheSketchUpEssentials/...
(Affiliate Links)
SKETCHUP BOOKS AND RESOURCES
kit.co/TheSketchUpEssentials/... (Affiliate Links)
MY CURRENT FAVORITE SKETCHUP PLUGINS AND EXTENSIONS
kit.co/TheSketchUpEssentials/... (Affiliate Links)
PLEASE LIKE AND SUBSCRIBE
Check Us Out On -
Website - www.thesketchupessentials.com
Twitter - / easysketchup
Facebook - / thesketchupessentials
Pinterest - / easysketchup
Disclaimers: all opinions are my own, sponsors are acknowledged. Product Links in the description are typically affiliate links that let you help support the channel at no extra cost.

Наука

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@theWanderer521 6 лет назад

thank you for this! I am an amateur concept artist, and this is a best way to redesign the way I work with structures on my concepts. Thank you once again and have a great day!

@Thesketchupessentials 6 лет назад

Awesome! Glad you found it helpful!

@rajkumar_gr 5 лет назад

Thanks Justin, I've been following your channel for past few weeks, you are making really good contents!!!

@Thesketchupessentials 5 лет назад

Thanks very much!

@pandarzzz 6 лет назад

Thank you for this video. These extrude tools are awesome! :)

@AsMethea Год назад

It is very important video for architect students like me. And I wanna say thank you so much for those video. Finally, I hope that you make more video of those.

@healthfullivingify 3 года назад

Thanks a lot. This is great guidance. You are my new Sketchup mentor. I have just bought the Shop version and am going to upgrade to the Pro. My need is to draw several greenhouse shapes for my organic farm. I will bend pipes to create beautiful shapes which are not just half circles but elongated arcs,

@piter1348 6 месяцев назад

amazing video thank You :) your work with sketchup community is astonishing throug all this years ...congrats mate! :)

@wayneseymour1 6 лет назад

Hi Justin, Great extension for our future city models , Perfect for that bridge image.

@Thesketchupessentials 6 лет назад

Thanks Wayne - glad you liked it!

@karanvagadia773 4 года назад

very helpful as always!! thanks !!

@ramy3103 5 лет назад

Thank you. This is awesome.

@saraipolo5133 4 года назад

I'm in love with your videos

@peteadams8507 6 лет назад

Great Job! Easy to follow and I learned a great deal.

@Thesketchupessentials 6 лет назад

Thanks Pete! Glad you found it helpful!

@adamarrah 4 года назад

Similar to rhino command, and i found this very helpful for sketchup. Thanks

@mangekoo3682 3 года назад

Awesome extension

@artworksenvisioneering2167 5 лет назад

I just realized this extension is the solution to drawing knee wall intensive story and a half in 3d: extrude by vector to object. Create the walls in 2d, make the roof in Tig's Roof, or Instant Roof (with inner faces) then extrude the walls to the roof underside deck. Super handy. Can't wait to explore the rest of what this extension can do. Thanks for highlighting it.

@Thesketchupessentials 5 лет назад

👍

@chandrasekhar-uk9gs 3 года назад

Great video it really helps lot for those making complex structures thank you for your video

@Thesketchupessentials 3 года назад

Glad it was helpful!

@gilbertbatara8127 3 года назад

Starting to update me and help a lot with this tutorial...more thanks

@diazromanz 6 лет назад

very good tutorial.. thanks.. 🙏🙏🙏

@MagicInternetMonkey 5 лет назад

Your tutorials are great!

@Thesketchupessentials 5 лет назад

Thank you!!!

@junsparrow1284 4 года назад

thank you for this very useful...

@kamdesign8275 Год назад

THANKS A LOT FOR YOU TUTORIALS

@TheHornoxx 2 года назад

... sehr sehr gut! 👍 and this toolset is worth at least this detailed kind of presentation! - not least because it is a tool for special tasks and not for the every day stuff. I want to say: I have to click your so good video again and again 😏

@willembuiting 6 лет назад

He Justin! I wish you all the best for 2018 and keep up the good work! I was just experimenting with this extension! Thank you for doing my homework! :-)

@Thesketchupessentials 6 лет назад

Hi Willem! I was so excited to see this extension get updated for 2018! It didn't really work in 2017, so now I'm enjoying all the things you can do with it!

@aleksandrakkuratnov1938 4 года назад

Thank you!

@yanuarpasa410 4 года назад

AMAZING !!!!

@AlbertoRamirez-jj9lc 4 года назад

Thanks Justin!

@Thesketchupessentials 4 года назад

Thanks for watching!

@stephanholland6181 6 лет назад

Great video, as always! As far as the Extrude Edges By Face function goes, I couldn't get it to work with any kind of a straight rail. It seems to work fine with arcs.

@pascarupang5718 6 лет назад

Stephan Holland if u an architect u should try revit😊

@zeinelabdinhussain1033 5 лет назад

well .. it's great for me as a student ! it makes life easier ))). thanks alot !

@Thesketchupessentials 5 лет назад

Glad you liked it!

@mootimadness7825 6 лет назад

thx bro jstn this was so smoooth. it helped me a lot

@Thesketchupessentials 6 лет назад

Thanks - glad you liked it!

@jobenlozano3338 5 лет назад

thank you so much for this video.

@Thesketchupessentials 5 лет назад

Thanks for watching!

@rohanrohi9635 3 года назад

thanks a lot bro😍❤

@selinsukara5277 3 года назад

very great job i love it! I just want to ask could you please record a video about the Milan Fair type of structure how it models??

@coskun7828 5 лет назад

fantastic

@MichaPiekarskidesigner 6 лет назад

very good tutorial!!!

@Thesketchupessentials 6 лет назад

Thanks!

@adamk197409 3 года назад

I no its an old video, but I love the way this guy explains things

@Thesketchupessentials 3 года назад

Glad you liked it!

@oliverngari5758 5 лет назад

This is so amazing ..

@Thesketchupessentials 5 лет назад

@sangwanqrduangkaew6670 6 лет назад

Thank for tutorial

@Thesketchupessentials 6 лет назад

Thanks for watching!

@Crazy_Comedy_0024 Год назад

Thanks.

@147waleed 6 лет назад

Wow... Powerful tools That why I think sketchup is the best

@Thesketchupessentials 6 лет назад

Glad you enjoyed it!

@147waleed 6 лет назад

TheSketchUpEssentials always enjoy ur videos 👍

@coultonbecker4203 5 лет назад

Hey Justin, I really enjoy your videos. They help me a lot with architectural modeling. One problem I'm having is making a curved surface from two curves but the other two sides of the profile are straight. The extrude tool asks for curves and not lines. Any suggestion to this problem? I'd really appreciate it. Thanks!

@40fmurugesan 3 года назад

hi i am murugesan , your video all vrey useful , i am using 2016 sketchup , thankyou,

@MohammedIbrahim-gv9uf 4 года назад

Hi there... You are amazing in every tutorial.. I've one doubt.. Is that plugin will run in 2015 sketchup version...?

@johnb2271 4 года назад

Great video, bro. Do you have a video on how to draw the curved lines you used in this video setup? Would like to learn the tricks and shortcuts to draw those

@Thesketchupessentials 4 года назад

I think I just used the arc tool...

@zhuyt18 3 года назад

I love your video and this plugin will help a great lot. The latest version says "v5.0 v2019 compatible - Note: ExtrudeEdgesbyFace tool removed - it is unstable in this and other recent versions.". Is there a way to find v4.0 or the single plugin "ExtrudeEdgesbyFace tool"?

@arqramedina 6 лет назад

great!

@Thesketchupessentials 6 лет назад

Thanks for watching!

@mofakher1732 5 лет назад

gooood video bro

@Thesketchupessentials 5 лет назад

Thanks!

@alnassr525 Год назад

you are amazing! but i have a question....what abaout if i have a wings of an eagle form, haw can i create an organic canopy?? thanks

@sephalipadhy1584 5 лет назад

hi JUSTIN, ur video is amazing it sort of solved my problem but wanna ask if we can change grid inputs in impose grids?

@Thesketchupessentials 5 лет назад

I don't understand - do you impose a grid in extrude tools?

@atikulislam3743 5 лет назад

I NEED THIS EXTENSION

@Thesketchupessentials 5 лет назад

It's linked in the notes below the video

@enthdied 5 лет назад

Hey, Thank you for the awesome tutorial. Have one question though, would it run well on a 64 bit system with just 4GB of RAM?

@Thesketchupessentials 5 лет назад

It really depends more on how complex the shapes you're creating are. If you use smart modeling techniques and keep your models low poly, it would probably be ok. A lot of the speed issues in SketchUp come more from modeling practices and the ability of the engine to display large numbers of polygons

@enthdied 5 лет назад

@@Thesketchupessentials okay got it. Thanks a lot! :)

@watitosk 5 лет назад

Hi justin!! nice tutorial...watching from costa rica...where can i find the PLUG IN??

@Thesketchupessentials 5 лет назад

Is it not linked in the notes below the video?

@phoenix1137 2 года назад

Is this extension available for the 2020 version? I looked for it on the extension warehouse but it didn’t come up!

@dimibzh 4 года назад

Really good tutorial. I have a silly question but I will be glad to have an answer. When I select a curved line it is separated on a few pieces. When I try to convert it in polyline it doesn't work. How can I reach this one?

@Thesketchupessentials 4 года назад

How are you trying to "convert" it?

@cookwithhiba8756 4 года назад

thank:s alot fpr your informations i like your channel so much please tell me their's no more 2015 modeles in the werhouse ??? i found only 2017 .. 2018 .. 2019

@Thesketchupessentials 4 года назад

Apparently not - that is an older version of SketchUp, so you're likely going to run into some issues like this.

@legacyfound 5 лет назад

hanks much Justin, Two thing about the first tool; extrude by rails (and probably others as well) however its critical to have solid lines as rails or profiles. Weld does not always work the first time but it appears to really be critical to have connected lines. Second there is a limit on how much of a incline the second melding profile can be relative to the first profile at least as viewed from the top (assuming the rails and profiles are based on the z plane. I could not get beyond about a 40 degrees incline before the extrusion imploded on itself. Am no expert so please, advise

@Thesketchupessentials 5 лет назад

No clue - I haven't played around with the melding profiles to that level of detail. I believe there's a thread over on SketchUcation that TIG posts in, so he might know more about this than I do...

@fabiocabrita3035 6 лет назад

how do I create that pattern in that form 6:29 , i have created before and now gives completely different form like flat surface when i extrude

@Thesketchupessentials 6 лет назад

I'm not really sure how to explain it differently - its basically that shape that I'm showing, and then you pick the options that I pick in the video...Did you make sure that you didn't accidentally draw one or two of the edges on the wrong axis?

@huajietoh4097 6 лет назад

Great tutorial! I tried out Extrude Edges by Rail on SketchUp 2017. all I got were the guide points but not the geometry. any advice?

@Thesketchupessentials 6 лет назад

I always got weird results with this extension in SketchUp 2017 - it seems to be fixed in 2018

@huajietoh4097 6 лет назад

that's too bad for me then...

@mipe7755 6 лет назад

Hi, for me "Extrude Edges by Face" also doesn't work with multiple curves (SU 2017). Looks like we need to wait for a fix.

@Thesketchupessentials 6 лет назад

There was an issue with this extension and 2017 - I thought that it had been fixed in the newest release (even for 2017), but I could be wrong. It works well in 2018. Thanks!

@marjono__ 5 лет назад

I've downloaded and installed it, but I can't show Extrusion Tools Window on my SketchUp. How can I show the Extrusion window on my SketchUp?

@Thesketchupessentials 5 лет назад

Did you make sure it's enabled in your extension manager?

@chengenhsieh7084 4 года назад

Hello, SU 2019 Pro user here, I cant find the Extrude from edges by face button in my Extrusion tools(timeline 14:30), do you know why?

@ggandreotti 4 года назад

Same here on 2018 and the Extrude Rail by Face seems to (not work) like the Extrude Rail by Face to Object. It is asking for a melding profile. The result is the same as show here not following the path. My version of the extension is v5.0

@jupagu 3 года назад

i have installed but i cant see in my menu, could you help me, please?? sketchup 2020 Thanks

@mad_sam 5 лет назад

Hi, the extruce Edges by rails to lattice have no option: Erase Coplanar Edges? as shown in your video. I´m using the latest SketchUp Pro 2018 with this Extension ... Thank you

@Thesketchupessentials 5 лет назад

No idea - that pops up when I run it - not sure why it would or wouldn't pop up on yours...

@CoolSs 2 года назад

I know it's an old comment but i found a solution . you need to change the number of the segments on your curves to solve it . when i added more segments . its seem to work fine .

@diannearabajaro2088 3 года назад

I can't download the joint push pull plugin in windows extension? Why's that? Can someone help me? Thanks in advance

@WF2602 6 лет назад

Nice plugins, i need how to make 3d humman on sketchup please i will watch this video

@Thesketchupessentials 6 лет назад

Hmmm...haven't done that one yet - I know it's possible, but I'm not sure if SketchUp is the best tool for human modeling - thanks!

@WF2602 6 лет назад

Okay thank you for tutorial

@SoSo-wb6gt 6 лет назад

can any one tell me why the function extrude by rails doesnt work if second profile is a straight line? I jsut don't get it :/

@alexpena3054 5 лет назад

hi there my name is Alex, i study architecture in El Salvador, i need to know what tools you use to create renders in sketchup and if you can make a video to explain how to use those tools, it would be awesome..... nice to meet you by the way

@Thesketchupessentials 5 лет назад

Hi Alex - nice to hear from you. I use several different rendering programs - you might want to start with this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-J7u6fEmJWpo.html - I have tutorials for Twilight, Enscape, and Vray on this channel right now, with Lumion coming soon. Thanks!

@mistersmith6163 6 лет назад

250 likes 0 dislikes, TUTORIAL EXCELLENCY

@Thesketchupessentials 6 лет назад

LOL :)

@bierin2688 2 года назад

i dont have any idea on how or where to put that tool after i downloaded it in link

@chenmac2703 4 года назад

双截面放样问题在哪呢？

@liliaellis4366 5 лет назад

I have 2019 SU and I've just installed this plugin. And there is even no button you've used in 14:40... So do you have any ideas about another method how to get follow me to multiply curves?

@Thesketchupessentials 5 лет назад

I don't understand - you installed extrude tools and one of the tools isn't in the list? Are you sure? Did you try reinstalling?

@liliaellis4366 5 лет назад

@@Thesketchupessentials yes, that is true. check the screenshot - you have 11 tools and I have just 10. there is no 'Extrude Faces by edges' - just exactly what I needed 😯 photos.app.goo.gl/a93QgYaMHum4SiCw7

@ThoiKeVanloipro0209 6 лет назад

I need help, I do not make faces with the first and second plugins...thanks you!

@Thesketchupessentials 6 лет назад

Have you installed the latest version? This was an error I had in 2017, but I thought it got updated and fixed - not sure for 2017 though

@ThoiKeVanloipro0209 6 лет назад

I used version 2017, But I still do not succeed.. :(

@aayushivasnik 5 лет назад

I cant download the extrude extension :(

@mezbec392 4 года назад

i have download it but it's not the same like he used

@peterstevenson7480 Год назад

TIG Extrude Tools is only for Sketchup 2018 or earlier, according to the TIG details on Sketchucation pages

@Thesketchupessentials Год назад

Working just fine in my SketchUp 2022

@vincentvasquez9444 5 лет назад

cna i ask how to activate the extrude tool into sketchup?

@Thesketchupessentials 5 лет назад

You should probably start with this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r1EcMNiW7t0.html - Thanks

@nicholasfurby2238 5 лет назад

Hay I've just been in the extention warehouse and the extensions tools plug in is not there?

@a.m.r.4418 5 лет назад

Hello. I had the same problem earlier. You may want to check your toolbar and make sure that the "Extrude tools" is checked.

@nicholasfurby2238 5 лет назад

I found it thru the link on the video. It's in a different warehouse

@a.m.r.4418 5 лет назад

@@nicholasfurby2238 you mean in SketchUcation? This link: sketchucation.com/pluginstore?pln=ExtrudeTools ?

@SoSo-wb6gt 6 лет назад

seems really cool, but for some reason after I installed it I do not get a tab with all the functions :? does anyone have an idea how to fix it???

@Thesketchupessentials 6 лет назад

You mean the toolbar? If it's installed and enabled in the extension manager, then you may need to right click in the toolbars section and make sure the toolbar is turned on

@SoSo-wb6gt 6 лет назад

it wasn't turned on on the toolbar, many thanks :)

@jobfridayameh7420 5 лет назад

When i extrude edge by rail it showed me dot like start not like what i saw in the tutorial solid with lines

@Thesketchupessentials 5 лет назад

Are you in SketchUp 2017? SketchUp 2017 didn't really work well with Extrude Tools...

@cokuzaklar 4 года назад

thanks for the video. does anyone tried to download it ? it is always failing. let me know please

@Thesketchupessentials 4 года назад

Downloads fine here

@deepalimahindru6528 4 года назад

Hi I m not getting mesh I m just getting black dots

@rommelandaya9261 3 года назад

How can apply to a curve line with straight line combination.

@Thesketchupessentials 3 года назад

I don't understand the question.

@latifa3757 3 года назад

How can i explod a line as segments? As u did in 9:19

@Thesketchupessentials 3 года назад

Right click - explode curve

@archieasylum1231 2 года назад

Curviloft I'd not working in my sketchup it says need licence and I don't know how to solve this problem

@Thesketchupessentials 2 года назад

It now requires a paid license

@gustarrezende 2 года назад

Cool! BTW, don't you blink? haha

@marekpieprzyk8274 6 лет назад

I love it, but cant find it in the warehouse, not sure why

@Thesketchupessentials 6 лет назад

Are you looking in the SketchUcation warehouse? I don't believe it's in the built-in SketchUp warehouse...

@marekpieprzyk8274 6 лет назад

I found it there, thanks but cant make it work, dont know how to 'plug' it in to the Sketchup. I tried to copy the file into plugins folder, but its manu doesnt appear when I open sketchup

@mrpen2paper 6 лет назад

window > extension manager > install extension

@crazyoldhippieguy 4 года назад

lock then in a group the lines you want sweeped.

@Thesketchupessentials 4 года назад

I don't understand what this means...

@crazyoldhippieguy 4 года назад

@@Thesketchupessentials You asked if any one can tell you how to get all those lines swept with that i pattern .

@samuelkilik8233 2 года назад

this do freeze up my sketchup a lot

@3DGvisuals 4 года назад

11:25 so SU can detect collisions! Why don't they add this as a standard function to assist with engineering projects?

@Thesketchupessentials 4 года назад

I mean...sort of I guess? I'm not sure how much of this is contained in SketchUp and how much is in the Extrude Tools script...

@CaliforniaEnslows 5 лет назад

Not sure whats going on. My extrusion using edges by rail is not following the rails. Instead it goes off about 45 degrees from where it should on both rails.

@Thesketchupessentials 5 лет назад

No clue - is your rail geometry split somewhere?

@darickflicke5126 6 лет назад

Still have no idea how to extrude edges by face on a mesh without doing it line by line

@Thesketchupessentials 6 лет назад

Wouldn't that be Extrude Edges by Rails by Face? 16:31 in?

@billyjoelization 5 лет назад

I can't seem to get edges by rails to make faces. Just leaves me a nice pointcloud

@billyjoelization 5 лет назад

Nevermind it was version 3. Thanks

@Thesketchupessentials 5 лет назад

👍

@k1rzon 5 лет назад

как же плохо что я не зная английский язык(

@lordkered 5 лет назад

Extrusion is killing me. I select all the right things but Sketchup just generates a shape using the first shape and the first rail... completely ignores the melding and rail no 2???

@Thesketchupessentials 5 лет назад

Sorry, not sure what's causing this. The simplest question I would ask is are you sure you have the right tool selected?

@ungabungaification 4 года назад

I found what you've boon doing wrong with the extrude edges by faces and I can quickly explain it. Just answer me to the comment to see if you're really checking the comments and I will tell you :)

@Thesketchupessentials 4 года назад

Sigh....yes, I check the comments

@ungabungaification 4 года назад

@@Thesketchupessentials sorry then, some do not. You've got the circle and the rectangle facing opposite directions. They have to face the same. So instead of seeing one of them white and the other one grey, you need to see them both in the same direction (either both white or both grey). For me it worked, good luck and let me now :)