Amazing Full DIY Process Crafting a Classic Boat // Woodworking Creative New Projects 

A lot of negative talk about this guys boat . I've built boats all my life wood and fiberglass. And I think you bunch of haters should keep your comments to yourself at least he's trying and it's probably his first boat .I'd be willing to bet that you negative people couldn't even come close to building a boat 🛥 so please give the guy some credit.

I see a lot of compliments and a lot of complaints, but not constructive criticism. Here I attempt to offer some. The seam and batten method can make a strong boat, if the joinery is good and the design transfers loads well. Four simple changes to strengthen this boat. Fair the planks to lie flat to the stem, bed them in asphalt. To improve the joint at the keel, cut the middle bottom planks at an angle, then fit finely with a plane. Use long timbers or scarf the planks and battens, and lay them in long arcs. When the planks or battens must be assembled from shorter pieces, stagger the joints fore and aft so that nowhere is one joint in line with the next joint above it. Run a timber fore and aft along the inside of the top of each frame. For less drag and easier paddling, paint the outside with exterior latex primer and cover this with several coats of exterior exterior acrylic-latex paint rather than asphalt.

I was hoping to see a craftsman at work, I hope that’s just for display outside a pub or something 🫣

And I love the 60's and 70 's sounding music in the send off. He'll yeah

I bet that gives them hours of fun and is what they can afford. Bon voyage!

You are a great woodworker and I applaud your boat build! What are you going to name her? Make your next one bigger, and try to use a steamer to steam the long pieces of wood so you can use one piece and bend it, making it monolithic from front to back. Keeping the planking and d structural monolithic, at least from front to back will increase the strength overall of your craft. Best of luck and smooth sailing friend! 🙏💪👍

Those top professional craftsmen designed and built a boat by applying the very basic principles , which almost all people they don’t know. Thanks

Hi. You did really good job on that small boat .but you know the screws will get rusty with time on water even you painted it with that black oil water resistant. I'm not spécialist on boats but I have some skills and I think that it will damage the wood with time. Anyway it's just my opinion. Thanks 👍

Your next boat has to be better.

When cabinet makers build boats.

it was all going good till the end, was thinking of finishing the product, to be continued hhhhhh

oi amigo ja me inscrevi no seu canal desvejo muita paz e sorte like merecido sucesso

itu cukup bagus saudaraku, bayangkan jika beliau tinggal di tepi sungai di kampung, pasti beliau bisa hidup , memancing ,menjaring ikan , tanpa perlu meminta minta, jika di tambah dengan mesin yg kecil saja ,sudah bagus , seperti mesin rumput sudah cukup, tahniah dengan bakatnya,

Sudah ok, tapi masih perlu di tambah trim dan sirip. Untuk kurangi oleng samping dan angguk depan.👍

wonder how long pine will last in that setting.

Canvas impregnated with asphalt laminated on today asphalt painted on the hole would make it incredibly strong. I’ve seen ocean going boats with nothing but canvas and asphalt

Hey bro I like your shop especially your band saw. Don't pay any attention to the haters.

Pekerjaan pembuatan perahu kayunya cukup spel teman itu bisa menambah pengetahuan saya,, trimakasih sahabatku❤❤❤

Broke all the rules , and still pulled it off 🎉😂

Why the weak spot in the middle of the boat? I assume you have no long boards.

Only good for Viking funeral fire.

Interested in how fast they were able to build?

mantap

Porque o dedo nervoso pra usar a chave de impacto ??

It floats. Nothing more.

How many deck screws was that?

She flaots😊, good attempt

I have watched many of boat building techniques. This is the best and simplest way, and the joint technique applies the best physics rules.

Jangan koment yg tidak baik...brow... nyatanya bisa mengapung... itu kalo di desa saya namanya sampan / prahu kecil untu sarana antar rumah...bila sebagian besar desa itu biasa terkenang air.... biasanya dikayuh ibu ibu..apa untuk belanja... cuma di sekitaran desa tersebut.... tidak untuk mengarungi laut.... mengerti...brow...?

You go captain! Good job

Nice idea in making boat.

Great video. Thank you. Cheers.

Lindo trabajo pero si ponen 2.000.000 de tornillos es necesario mostrarlos a todos ?

Супер!

Gut gemacht, nur schade das das schöne Holz von diesesTeer verdeckt wird. Es gibt andere Methoden Holz abzudichten.

It would be more stable if you gave it a wider stern

极好的

weak manner at 4:44, grain needs to follow the curvature.

No balancing ,,,,👍🇲🇾

Looks like a waste of second rate timber on a third rate design.

Hello please anyone give me sizes and drawing of the ribs. and their inclines.

Наглядное пособие как Не Надо строить лодку.

去到海水肯定(翻船)

You did a very excellent job it looks very good and the voice seem to be having a good time but you were very talented in carpenter I’ll keep watching you God bless

I grew up shrimping on 50’ Biloxi Lugger. Been around boat yards all my life. This guy is talented! Have some respect. Keep your mouth shut if you can’t say something nice. Or post a video of you trying to build a canoe. Probably don’t own a saw.

Beleza de barco 👍👍👏👏👏👏

Excelente

🤝👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Apa nama lem untuk perekat kayu..

應該是在做模型要不然一根釘子就能成行嗎i

I myself don't see anything wrong with that boat 🛥 I believe he did a good job other than the stern but it's still good job

NOAH : HOLD MY BEER.

Very nice work. You're very talented. 👏👍

Ужас! Неужели это правда?

Bigung cara kerjanya..

All I saw was a guy pole the boat around a shallow pond. There were no oars or oarlocks. The boy with the double-end paddle was not using it, possibly because the boat was too heavy to paddle. Anyway, sitting on the deck is too high and unstable, and sitting on the floor is too low and wet -- seats about midway in height would be about right. The tar will likely be a mess in the sun. Need a line on the bow (called a painter) to help dock and secure the boat. However, you put in a lot of effort and material and you know your carpentry, so I wish you well. Just stay away from deep water. 😊

Belo trabalho mesmo viu mestre 🤜🏻🤛🏿👏🏿👏🏿👍🏿👍🏿🙏🏿, só uma pergunta que madeira e esta??? Esta parecendo o Pinus !!!???

Too many oddly placed butt joints for my liking. He could have run some of the stringers and boarding better.

hack

I have a lot of respect for the builder, but none for some of the shitheads in the comments section.

schlechte und unsaubere arbeit bei uns in deutschland wird ein gerissenes brett ausgetauscht

Yc ho

WTF

херня- на днище и на стыке борта и днища нужно класть целые доски, от носа до кормы.

Not 4 me

now that's an ugly boat

👎👎👎👎👎👎👎👎👎👎

I think it must have been this craftsman's? first boat build, faults too numerous to mention. Maybe just a kids playground toy?

Содист шоруповерта