Amazing Self Leveling Concrete Overlay (Fixing a badly damaged concrete floor)

Подписаться 291 тыс.

Просмотров 755 тыс.

50% 1

#EverythingAboutConcrete #MikeDayConcrete
How to use self leveling concrete overlay to fix a badly damaged concrete floor.
We're using Sakrete Fast Setting Self Leveling concrete mix to fix this concrete floor.
It was really out of level and we needed to level it to install a stamped concrete floor over it.
This self leveler went down from 1/8" thick to 1 inch thick.
It was very easy to mix, place, and level.
Sakrete has and excellent self leveler here, I would recommend it to anyone.
COLLOMIX X06 MIXER:
amzn.to/3phDDYq
SHOE IN SPIKED SHOES:
amzn.to/3D8Gk3A
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Хобби

Опубликовано:

8 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 358

@erroldillon1548 9 месяцев назад

You’re a Master concrete specialist!!! Fantastic procedure. I will definitely follow your instructions. Thanks!

@johnd942 6 месяцев назад

Proven again! How a master tradesman can make a complex procedure look so simple, and there lies the danger for D.I.Y'ers! An amazing job! There was a lot of technical know-how going on here.

@fullblownredneck9623 2 года назад

I took a drink of beer every time he said level. Ten minutes in and I'm done.

@katphish30 Год назад

Do you want alcohol poisoning? Because that's how you get alcohol poisoning.

@brianallen8091 Год назад

Sure. With that attitude, you sound like the type of guy the rest of us goes behind and fixes their “work”. Have another for us, we don’t mind the extra work. 💰is💰

@codycampbell6805 Год назад

I ran out of beer.

@romansfoodcritic Год назад

🤣🤣

@ToddDunford Год назад

My friend died trying to also drink during the 'stampable overlays'

@als1023 2 года назад

Excellent video. thank you for all the great content here !! Anyone looking to self level a floor should watch this.

@MikeDayConcrete 2 года назад

I appreciate that!

@mikeknoll1130 2 года назад

Wow, very tedious, but you guys just knock ‘em out, you guys might just be the very best,looking forward to the next vid.

@MikeDayConcrete 2 года назад

Thank you Mike!

@kenjjjjjjmmmm 5 месяцев назад

I'm very impressed by your skill and expertise. Well done.

@dougsherman1562 2 года назад

Thanks for another great video Mike. I have a job just like this coming up and sure appreciate the walk-through on the process.

@MikeDayConcrete 2 года назад

I'd recommend using the Sakrete self leveler. Let me know if you can't find any.

@penguinbrand 2 года назад

Great video and great work. Thanks for the great instruction. Would this work in a garage or would the overlay eventually fail if is too thin? Thanks again!

@rayc6685 2 года назад

You’re the best in the business! I wish you worked in my area.

@robertpedretti2761 2 года назад

Great description of the process. Great video!

@jefff6167 2 года назад

Thanks for taking the time to create such great content. 🇺🇸👍

@GORBACHEVMA 2 года назад

"Self leveler self levels itself" is the best quote from this video :)

@alphaomega3173 2 года назад

I was renovating Ikea bathrooms with my buddies and we used self leveling concrete for the floors because we ripped out the old tiles and took some of the concrete with them. We had the tile guys coming in two days and they were suoer happy with the result. Very simple easy job and this a great idea to make a old garage floor have some youth into it again.

@MikeDayConcrete 2 года назад

Thanks, that's awesome!

@dougbaker5269 2 года назад

Great content Mike. Being in the flooring business for 20 years now I have used alot of self leveling. My only recommendation I would say and you already said it. Use the primer every time. Keep up the good work. 👍

@MikeDayConcrete 2 года назад

Great tip!

@SuperTedsmith 2 года назад

Rule of thumb in self leveling is primer is a must

@Wright_Works 2 года назад

Okay, how do you fix if primer wasn't used before the pour?

@randywl8925 Год назад

@@Wright_Works cross fingers. 🫣 If it didn't pop, you'll probably be fine, but I agree. It helps the bond and helps reduce moisture being sucked from the self leveler. Most self levelers require X amount of water per bag. If it looks too thick, don't add another cup of water to suit it to your liking. It's a precisely engineered material and you don't want to screw with the chemistry. I added extra water on my first job. Not much, maybe a half cup.... or more. I came back two hours later and there was a 1/32" pool of water in the center of the pour. It should have been ok to walk on, but it wasn't.

@house_church 9 месяцев назад

Excellent video. Much thanks!

@michaelvonfeldt9629 2 года назад

I really enjoy your channel Mike. Thanks!

@rottenL 8 месяцев назад

Great video, great narration, great finished product!

@XBKLYN 2 года назад

Love watching pros do their thing!

@xCoolBreezex 2 года назад

Great video thanks for all the details super thorough

@ronwalden1431 2 года назад

Very nice job. Look forward to the stamp finish.

@MikeDayConcrete 2 года назад

Thanks Ron, it'll be out Friday.

@jasonmarshall7827 2 года назад

I love watching your videos very helpful,you guys do top notch work.

@MikeDayConcrete 2 года назад

I appreciate that Jason!

@carverboycarverboy2097 2 года назад

If you lay the mortar bags down, cut the bag in the middle, then lift the two halves up while standing over the ends of the bag so your feet help stabilize the half bags. Once they are vertical you can rip the end apart with trowel or hand. This way you can easily add a half bag at a time and avoid the lumps in your mix.

@georgetuider654 2 года назад

I've used a couple of the self leveling products. Great to have the three of you to work together on this with two mixing and you moving it around. That stuff can set up pretty quickly! It's not cheap, but it is WAY more cost effective than the alternative: Breaking up the old floor and pouring a new one.

@MikeDayConcrete 2 года назад

You're right on George!

@johncumpton7198 10 месяцев назад

Wow that stuff’s amazing

@joanies6778 2 года назад

Love watching these videos. Maybe I can do this in my basement. My town has had at least two 100 year floods in the last 50 yrs before they fixed the river flow. My 104 yr old house has several rooms in the basement where the concrete has failed and is all broken up or cracked... something I discovered only after removing the false floors. I just want to get all the debris removed and get some respectable concrete floors in. This would work short of pouring all new thick floors.

@MikeDayConcrete 2 года назад

It might work, you saw how bad this floor was.

@ricardogutierrez3367 5 месяцев назад

Thanks for video sir!

@josecondemarin9586 2 года назад

It looks good, I feel like you need to be patience and let the mix do its job floor looks good after. Great job !! Good video. Take care thanks 😊

@MikeDayConcrete 2 года назад

Yes! Thank you!

@user-fx4qz8pt3w 2 года назад

Great videos, such detail, I almost feel like I could do this... almost.

@MikeDayConcrete 2 года назад

I think just about anyone could do this.

@jlawlar 2 года назад

looks great

@mikemaben7485 Год назад

That self leveler came out real nice

@cmm170526 2 года назад

Great video! Thank you for sharing this with us.

@MikeDayConcrete 2 года назад

You bet!

@tombo3100 2 года назад

Great video. If you just wanted to keep the natural look and not use a shiny sealer, what sealer would you recommend to use on this?

@gws86 2 года назад

Great video. How do you maintain proper flow to the drain?

@glenishii2022 2 года назад

Nice work!

@Bootzey73 Месяц назад

Nice job, thanks for the share.

@bandyboylilboy 10 месяцев назад

Great video Mike! Do you have to repair the cracks if your putting ceramic tile over the self leveler? Thank you!

@thezzach Год назад

Love the detailed narration

@MikeDayConcrete Год назад

Glad you enjoyed it

@igorshapovalov8681 2 года назад

great job Mike. What primer did you use for the concrete?

@NathanHarrison7 3 месяца назад

Thank you. Subscribed.

@sarcasmo57 2 года назад

Looks great.

@calebtylerr Год назад

Awesome video! I am looking to do this a finished floor in my studio space. What sealer do you recommend for finishing of this overlay? Thanks!

@casade2831 2 года назад

I love this video. By far, my favorite 👍

@MikeDayConcrete 2 года назад

Yay! Thank you!

@vincentjohnson9126 2 месяца назад

Awesome video!

@unclemilton815 2 года назад

Very nice mate.

@jonl8445 Год назад

Would like to have seen you laser after the first coat to see how close you can get it to level. Good video, thanks.

@user-wx2ci7wk6i 6 месяцев назад

Great video man! Thank you

@MikeDayConcrete 6 месяцев назад

Glad you liked it!

@frankflanagan109 2 года назад

Looks great Mike! I'm gonna check out that mixer, mine is about shot....

@MikeDayConcrete 2 года назад

The mixer is awesome. Darin loves it.

@viankalobosvalenzuela7456 2 года назад

Excelente trabajo 👌👌👌 saludos desde Chile 🇨🇱👌💯

@MikeDayConcrete 2 года назад

Thank you!

@gator6596 Год назад

One of the best and concise instructional videos I’ve watched! Since 2005 have watched over 5,000 videos! You guys are real professionals!

@fljetgator1833 2 года назад

Beautiful work 😎🇺🇸

@MikeDayConcrete 2 года назад

Thanks

@SuperEddietv 2 года назад

I love this stuff!

@MikeDayConcrete 2 года назад

Thanks Eddie!

@danielblea3520 2 года назад

Mike, could the Sakrete be used to even out the finish on a poured in place concrete counter top?

@JohnCunninghamTeam Месяц назад

Very helpful. QUESTION: I have an old floor we are chipping saltillo tile out of. It will probably need repairs and leveling. I want to make this floor a sandy off off-white color with no joints or stamping. Prefer a finish similar to a fine smooth plastered wall. Not looking for a high polish. I imagine it will need a penetrating sealer, and we want to ensure that the sealer leaves no sheen or coated appearance. I appreciate the advice upfront. Thank you!

@rogerhodges7656 2 года назад

I would like to see a follow-up in a year. The floor appears to have a lot of existing cracks. I expect those to all telegraph through your new finish floor. Good luck!

@MikeDayConcrete 2 года назад

It's always possible. Being this old and now a heated space I think this one will be good.

@glennfelpel9785 2 года назад

It sure is good to learn all the details of what products and tools you use. Always something new, very much appreciated. Am looking forward to the stampable overlay techniques too. Thank you for the video it is great.

@MikeDayConcrete 2 года назад

My pleasure Glenn!

@raylagos328 2 года назад

Nice 👷🏽‍♂️

@clarksonjones6474 24 дня назад

Mike what would you recommend (product) for an outdoor forklift pad that is heavily spalled ?

@srd2725 2 года назад

Could you use this over old asbestos tiles to encapsulate them?

@lineman198625 2 года назад

Could you apply rust-olems polycuramine over top of this self leveled concrete finish or would you need to do something different?

@rugerdogg5316 2 года назад

Is there a specific mixing paddle for self leveling or maybe a different technique maybe to long on mixing. I used a primer exactly how the directions said and had an extreme amount of air bubbles anyway. Which I had to use a micro topping to cover .any suggestions?

@JohnDoe-wd8rs 2 года назад

Do you seal around the edges of the walls and if so, what do you use?

@mikedebellis6935 Год назад

Hey Mike, or other concrete pros for that matter, is there any reason you guys don’t use a wheelbarrow? Love the content. Thanks!

@Morganexvavation Год назад

Have you used the concrete recap for floors like this and left it? I’m wanting to do it smooth finished but did a test run and it feels very grainy.

@joedasilva38 4 месяца назад

Would you advise me doing this to my concrete pool area here in Western NY?

@luksaantono2311 2 года назад

Very cool video! Around a minute in you put black text over the screen - if you put a slight white outline around the text it’ll make it more legible. Same with the white arrow at about a minute thirty but in reverse - a black outline around the arrow would help it stand out Can’t wait for the next one!

@MikeDayConcrete 2 года назад

Thanks for the tip!

@chandler1937 11 месяцев назад

I want to re surface an outdoor patio and I am wondering how soon can I apply some sealer to this after it is put down?

@robvic38 2 года назад

Hello Mike you can do mettalic epoxy over this?

@tabathastaples7884 День назад

Shepherd's Chapel Network !!!!!!! Stay Humble / It's Never Luck !!!!!!! Amen

@charlesjohnson3853 2 года назад

Mike - How would you fix a concrete pad (driveway) outside where I used Ice Melt by mistake and the top finish spawled and now I can see the aggregate... I have heard so many different opinions locally... some say I have to dig it up and start over, some say an epoxy surface top coat... With car traffic I don't want something that will fail in the future. I had no idea Ice Melt would destroy the concrete... Thanks - Great content by the way...

@andrewchitty5453 2 года назад

great job Mike and team. I paint concrete pools wonder if those shoe ins would work for me.

@MikeDayConcrete 2 года назад

I suppose they would.

@psalwasser 2 года назад

what do you charge for something like this? the prep, the levelor and the stamped colored overlay?

@williamphillips753 8 месяцев назад

Can your drive on it without damaging? Would like to smooth out my garage floor.

@pacelee8952 2 года назад

Whats your thoughts on this being used as a finished flooring over plywood subfloor on a second level? The specs say thats a sutable use with primer, and metal lath screwed down. Whats your thoughts? looking to do so kind of concrete overlay for a finished floor on the second story of a house, let me know if theres a different product you would have in mind. THANKS!

@thatguy6207 2 года назад

I need some of those spike shoe

@AntonJMiller 2 года назад

would a product like this hold up in an actual garage? or what would you recommend to resurface a garage floor with decent sized cracks and pits

@kellenwhitney4505 Год назад

If you have an indoor laser level you can wrap tape around the drill n mark a line on it , whenever the laser is on that line you know the end of your bit is grade. Time is money. 💪🏼

@ExpressLaneDesign 2 года назад

What tool did you use to grid the floor before leveling it?

@nimster64 2 года назад

How many bags did you go through? Where can I get the primer and the concrete lever? Great video. I need to do my driveway will it hold up to ice and also can I use salt on it to melt the snow? How long will it last? I do have prety big cracks

@fantasticfamily5004 Год назад

Amazing 🤩.

@MikeDayConcrete Год назад

Thank you! Cheers!

@ryanharrison1613 2 года назад

Any advise on going over mastic

@CarnivoreguyScott 2 года назад

We use Ardex, but I’m wondering if Sackrete is available on the West Coast ?

@masonfisher1535 8 месяцев назад

Would you recommend this product to level out uneven spots on the floor or should you do the whole floor? I have a new poor,garage floor that got scalped a little bit with the power trowel. Would you recommend this product to fill that in? thank you

@TalksWithRyan 2 года назад

Quickrete has a self leveler now that comes in a 5 gal drywall bucket pretty handy

@MikeDayConcrete 2 года назад

That is handy! Thanks

@bryanlloyd1099 2 года назад

Great job as always and Hope you had a nice Thanksgiving!

@MikeDayConcrete 2 года назад

I did! And thank you!

@jamierollings3101 Год назад

Can this be done on an exterior patio? For a bit more info: I had a company come and level out my badly broken up 25x11 patio (with crushed limestone) so it is level now… however the cracks remain. Can I patch the cracks and use this same method? I live in northwest Indiana so I do have a rough winter….

@robertocortez4869 Год назад

Hello Mike, Thank you for these videos. I signed up in the Concrete Underground and I am very excited about being able to do this as a business at some point. Do you have any video or info about how you did the stamp overlay. Is it with this self leveling the same process as when you done it with new concrete on patios? Thank you

@briggshome7012 2 года назад

My experiences with this stuff have been excellent. Early on, I found that you MUST mix it to a loose, pourable consistency....don't worry about it being too thin. If it's too thick, it won't flow and level. You must seal ALL edges and openings through which the leveler can seep out. not only will it make a divot in the final job, it may damage something down below. Finally, this stuff "cures" rather than "dries." So, as soon as you mix it, it wants to start hardening up. Pour it, spread it, level it and MOVE ON! It's great for leveling bathroom floors, too!

@MikeDayConcrete 2 года назад

Awesome, thank you for the comment!

@SuperTedsmith 2 года назад

Must mix according to manufacturer, water to powder ratio needs to be accurate

@matoko123 2 года назад

No mention of the surface destroying bubbles that I experienced. Awful!

@randywl8925 2 года назад

@@matoko123 was a primer required and did you use it?

@randywl8925 2 года назад

@@SuperTedsmith that is exactly what needed to be said. The first job I did with self leveling material was a learning experience. I mixed exactly the right amount of water according to the directions but it looked too thick so I add an extra cup or two of water to where I thought it looked like it should be. I left for an hour and a half and when I came back it was Matt colored around the perimeter of the area and it was a very thin film of water across the middle where the floor was deeper. I learned is that this is a chemical reaction. When mixed according to instructions the water and the cement mixture combine in a way that makes this reaction take place. When mixed correctly, some of the products can be walked on in an hour because the chemical reaction removes or converts the water. If you add extra water, the chemical reaction still takes place but then the entire mix has too much water and now the water must evaporate. Can take an awful long time for the water to evaporate. A couple of hours, it may take a few days and who knows how that extra water effected of the material. This is not plain old concrete. These are high-tech materials and the only thing that's important is having the mixing containers ready to go so you can do the poor as quickly as possible. That can mean having an extra person or two doing nothing but cleaning buckets and getting them ready for the next mixing. It's better to have too many people than not enough, especially so when the weather is warm. Use cold water to slow down the chemical process, not hot water from 100 ft hose laying outside..... If you use the warm or hot water from the hose you will learn very quickly why not to do that. 😁

@craigmeyers4497 2 года назад

Wow! You could put a dye in it and make it look like marble.. That's nice product..

@MikeDayConcrete 2 года назад

Awesome product!

@tylerngo4894 2 года назад

Is it method work for outdoor sir? thank you!

@afveteran Год назад

Hey Mike... question! If I use 2 diffrent brand name products for sealer and then use Sakrete, outdoor self leveling concrete. Because neither Lowes or Home Depot doesn't carry the specific brand.

@jmenterprise3764 2 года назад

Next owner of the house.. man this would make a nice garage

@BryanJacksonLives 3 месяца назад

I plan on using this stuff to level and prep floors in a 100 year old house where I'm laying LVT throughout. I know I have to seal up all the cracks and holes in the floors but I need to use the primer if I'm just going over the leveler with clicklock flooring?

@sierranick6293 2 года назад

Great video super helpful! How many sqft was the area and how many bags did you use? I'm considering doing around 800sqft of my basement.

@MikeDayConcrete 2 года назад

This was 480 sf. About 40 bags. They'll do about 50 sf at 1/8" thick.

@charlesjohnson7222 11 месяцев назад

With the slop of the floor how did you calculate for your material/number of bags?

@6806goats1 Год назад

So would a primer help when the concrete has already been painted and I want to put down some thin leveling compound? My house uses hydronic floor heating and the builder (owner built) used regular concrete and not gypsum. Then the concrete was painted and carpet laid down, single layer, no pad. It's not in terrible condition but I'm thinking about vinyl flooring planks, no foam. I haven't check to see how level or straight the floor is. Just some barely visible trowel marks so not a smooth pour. Thanks.

@ghosteye21 Месяц назад

Can you do a flake epoxy system over this?

@MonthlyInvestor Год назад

I have a spot that runs back towards my foundation, could this be used to raise it a bit?

@drdilettante 2 года назад

Great video! My "new" house has a garage converted to a living room, and it's way out of level. It's got 12" ceramic tile down, and Jeff at Home Renovision has said you can go over tile (especially if there's possibly asbestos; I don't think mine does likely doesn't b/c it's from the 1990s). If you agree, should I rough up the tile or just pour on top . . . to what thickness? I want to install LVP. Thanks!

@matoko123 2 года назад

Paint a tile PVA on it first.

@hectorsanchez2524 Год назад

Did you end up going over tile?

@drdilettante Год назад

@@hectorsanchez2524 I've got the floor prepped, but the drop is 2", so I'm going have to build that end up by adding gravel, then let that set and cool before adding the self-leveling concrete.

@amagicforest 2 года назад

Mike, every time you post a video I want to go to the building supply store and buy some cement to mix...So how many bags did you use for the job and what square footage. Also would this help in the flex of a concrete floor...the reasoning for the cracking I' sure. I'll be back later Mike I got to go to building supply store for some bags of you know what!!!!!

@SometimeAgo65 2 года назад

Can you still do this if your carport has been painted? Mine needs it badly...it's so unlevel and doest drain off properly. Huge puddles of rain water in about three spots...one right at entry door