AMAZING TOOLS THAT HAVE REACHED A NEW LEVEL

Подписаться 4,7 млн

Просмотров 2,3 млн

50% 1

Mind Warehouse ► goo.gl/aeW8Sk
1) Roof Snake
• RS501 RoofSnake™ - Sh...
2) 4JET JETLASER
• Laser Cleaning - JETLA...
• JETLASER by 4JET - Han...
3) Katimex Kati Twist 2.0
• Katimex® - Kati Twist ...
4) Tube Straightener
• Tube Straightener
5) Smart Box Shark Tooth
• SmartBox Shark Tooth F...
• Madison Shark Tooth
6) Trend Inflatable Wedge
• Trend Inflatable Wedge
• The Trend Winbag
7) ELS 225.1 (Preview)
• ELS 225.1 - VacuGlide-...
8) Connect Cable Tie Tensioning Tool
• 30372 | Cable Tie Tens...
9) PIPECUT mini
• Get to know the PIPECU...
10) POP Eeze
• POPeeze Instructional/...
• POPeeze Popcorn Textur...
11) LT855
• LT855 | Texas Twister ...
12) HPC8+ Reed Manufacturing
• Guillotine Pipe Cutter...
• Guillotine Pipe Cutter...
13) BAK RoofOn Automatic Heat Welding Machine
• BAK RoofOn Automatic H...
14) JAW LAZY TONG HAND RIVETER
• Matco LTRV44 - 2 JAW L...
• Eclipse Professional T...
15) Door Stud
• The Door Stud 2020
16) Raimondi Tyrel
• RAIMONDI | TYRREL - Tr...
17) Spray Gun
• *NEW* Graco Contractor...
18) Neway
• Neway. Восстановление ...
19) RAIMONDI VOLPINO
• RAIMONDI VOLPINO Vib...
• RAIMONDI VOLPINO 磁磚牆...
00:00 - ROOF SNAKE
01:00 - 4JET JETLASER
01:52 - KATIMEX KATI TWIST 2.0
02:40 - TUBE STRAIGHTENER
03:26 - SMART BOX SHARK TOOTH
04:21 - TREND INFLATABLE WEDGE
05:12 - ELS 225.1
06:03 - CONNECT CABLE TIE TENSIONING TOOL
06:45 - PIPECUT MINI
07:35 - POP EEZE
08:24 - LT855
09:09 - HPC8+ REED MANUFACTURING
10:04 - BAK ROOFON AUTOMATIC HEAT WELDING MACHINE
10:51 - JAW LAZY TONG HAND RIVETER
11:37 - DOOR STUD
12:30 - RAIMONDI TYRELL
13:23 - SPRAY GUN
14:21 - NEWAY
15:04 - RAIMONDI VOLPINO
For copyright matters please contact us at: copymanager.mn@gmail.com Dance of the Pixies by Machinimasound licensed under Creative Commons Attribution 4.0 int’l / @incredible-qq2zi

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 149

@MeditationParadiseLand 2 года назад

Thumbs up Excellent video! The person who is reading this comment, I wish you great success, health, love and happiness 💖

@stephenroberts7459 2 года назад

... and the same to you, most beautiful lady!

@Gogga86 2 года назад

That riveter design must be 100 years old

@toptechworld_3d839 2 года назад

Yeah prolly been working on that for awhile

@kentuckybeardsman 2 года назад

Literally all these tools have been around for years.

@Joe-si4bl Год назад

In the start who thought the hammer thing was the tool

@John01GM40 Год назад

the logical development for the ceiling / wall sander is to remove the human and replace with a robot. That will cure back and neck strain

@cyt3771 2 года назад

As a substation/P&C electrician cable tie guns are a game changer. I've got a Panduit GS2B Tensioner and its been well worth it.

@redteam77 Год назад

I got one of these in 1977 and still working.

@Gilbertory Год назад

Does it work on those metal ties?

@420ClubFoodandBeverageDirector Год назад

Some of these tools have been around for years, the sanding system I own I have had for 9 years and it wasn't brand new. Those air pump jacks also.

@stephenroberts7459 2 года назад

the cable tie tensioner has been available for forty years to my knowledge! I was using one in 1985,

@simwood1958 2 года назад

British telecom issued them to engineers like myself for use with the new style phone sockets around the mid 1980's

@petercampbell1648 2 года назад

"forty years" and "1985"... those two terms just don't seem right together in a sentence! It feels like "forty years ago" should be referring to something in the 1960s... 🤣🤣

@stephenroberts7459 2 года назад

@@petercampbell1648 Frightening isn't it?

@richardjura7450 2 года назад

40 years ago was 1982.

@stephenroberts7459 2 года назад

@@richardjura7450 thank you for being pedantic!

@ReedPipeTools 2 года назад

Thanks for including the REED Guillotine Pipe Cutter. It cuts PE SDR15.5 - SDR9

@edwardneale8775 2 года назад

Did I hear right it cuts pipe UP TO 8th of an inch why ???????

@ReedPipeTools 2 года назад

@@edwardneale8775 The cutter cuts within 1/8 inch of square. The model shown here will cut pipe 3" - 8" DIPS & IPS.

@JustMamba 2 года назад

That air jack has been used by lock smith's for a while. I remember when I got locked out of my car a few years back. I called triple a or something similar and they came used one and had my door open in 2 minutes lol

@himrerational4665 Год назад

@michaelbears9155 4 месяца назад

the fact that electricians have been using snakes for at least 40 years, lmfao

@TheBmco99 2 года назад

Them sheet rock sanders work good I use them

@PUKTTAMEDIA 2 года назад

whoever reading this please don't give up 🙏

@kirkyorg7654 2 года назад

that popcorn ceiling remover would last about 5 minutes in the real world the cheap looking plastic wont last

@Harry-zz2oh Год назад

If it works for one ceiling, a homeowner/handyperson would be satisfied. Removing popcorn from a ceiling is a PITA since you have to keep the popcorn off the furniture and everything else.

@kirkyorg7654 Год назад

@@Harry-zz2oh done it countless times it is one of the messiest jobs in a finished house and what they don't mention in the ad is that holding anything overhead like that for any length of time is bloody hard on the body and hard work wet popcorn mud is heavy that's why alter trial and error i always did it with a big ass 12 inch drywall knife on a bakers scaffold /planks with horses it is one job i don't miss

@tomstanton6952 2 года назад

Tech zone 💯🙌🏻😘🇺🇸 once again… blew it outta the park with another learning, awesome video ✌🏻😊🙏🏻😎 thanks!! Tom S.

@PUKTTAMEDIA 2 года назад

Hi tom

@tomstanton6952 2 года назад

@@PUKTTAMEDIA hello 😎💯🇺🇸

@tomstanton6952 2 года назад

Where you from

@PUKTTAMEDIA 2 года назад

@@tomstanton6952 visit me

@izuku_dripdoria1923 2 года назад

I love this guy

@PUKTTAMEDIA 2 года назад

@izuku_dripdoria1923 2 года назад

@@PUKTTAMEDIA hi

@Marfoir0303 Год назад

I’m in aviation; specifically aircraft structures. That laser corrosion remover would be excellent if it works on aluminum. We work with a lot of aging aircrafts & are frequently dealing with corrosion.

@jameslester4474 Год назад

Except for the fact that the Laser is basically BURNING the corrosion off, which would destroy the temper of Aluminum structures and in doing so cause embrittlement as measured by the aluminums conductivity. In short, using this would make the structure Crack, or soften the aluminum, exponentially decreasing it's fatigue life !

@billtaylor2050 11 месяцев назад

Lasers are already used for surface hardening of aluminium alloys, simpler than shot peening, so I think the metallurgical effects can be managed.

@potatohead1423 2 года назад

I have tried a TON of variations on the popcorn ceiling scraper. NONE of them work on 80's painted popcorn.

@andrewmax169 2 года назад

i know right

@johncomments2730 2 года назад

And any older than that and it could well be asbestos.

@Cornz38 2 года назад

Yeah, that was "artex" and stuck like shite to a blanket.

@Harry-zz2oh Год назад

Popcorn that old was put on with a very stiff paint, which kept it in place for decades. No matter how you do it, removing it is a pain.

@pericajoviva Год назад

Knock them down! Even in this video you have a machine that does it with a tungsten disk!

@tommyh9006 Год назад

"Here is a tool that will make a 12 square roof take 47 weeks!"

@AlexJonesWasRight1776 Год назад

LOL most of these tools are a joke and have very limited real life application use.

@drstevenrey Год назад

You gotta love the building slash construction tools, that only work on American card board houses.

@AlexJonesWasRight1776 Год назад

We in USA would never use this junk cardboard homes are much easier to construct when it is wet and using just an old fashion razor knife. These tools are a joke.

@noelcarey2968 Год назад

@@AlexJonesWasRight1776 b

@BigBigBailey 2 года назад

awesome sauce

@mobat5815 Год назад

Need some kind of hazards though 🧐. Love it Maybe u can adjust the steering hight??

@tools-zone Год назад

Nice Products @techzone

@Markalo1025348 Год назад

I always love the accent and funny sayings like "Not" is equal to "0" and Aleemineeum.

@coyottte13 2 года назад

Thank you very much for the links, big hugs for all, 👍.

@banmadabon 2 года назад

The Thieves Guild thanks a lot Trend Inflatable Wedge for its invaluable (depends on the wealth inside houses) assistance!😅

@robertbrown5620 2 года назад

🤣

@StarKnight619 Год назад

the door stud one I want its such a pain in the ass when your alone trying to install doors

@Cornz38 2 года назад

"Amazing" or "Vintage" as us oldies know them by...

@tajhayes7841 Год назад

Whoa.. soooo many GOODIES in this 1!!

@dorothyfkaplan4748 2 года назад

good job

@douglasherrera8111 Год назад

Techzone , your channel is really inspiring and it’s wonderful to learn new things from it. Keep doing what you are doing

@oneshotme 2 года назад

Enjoyed your video and I gave it a Thumbs Up for support

@mdrakibmahmud9500 Год назад

There are very nice video for you🥰

@bogey19018 2 года назад

Who uses a 3/4" roofing nail?

@marcuslinton310 2 года назад

2:18... love how they say to pull the cable through using the built in crank and then they show them just grabbing the line with their hands! F'n hilarious.

@banmadabon 2 года назад

Usually with crank you can barter hands, but sometimes, if they're in the mood, you might have pneumatic jobs done. Even if you blew a seal: They ain't good with hands (don't tell the penguins...) 😉

@petesarff8648 2 года назад

The plastic welder thing car locks like a carpet heater

@newamericatowguy3633 2 года назад

Those "JACKS" are air bags that we use in the roadside service industry and they're probably cheaper🤣

@daffhead4975 Год назад

A manual rivet tool? I think i'll rather used pneumatic or a battery tool instead

@rodrigo13121962 Год назад

Awesome

@MarcUK Год назад

The cable tie cutting tool has been around for over 25 years. It's not new and the one shown doesn't have any new features.

@jaywalsh1329 2 года назад

They show lights hanging from a box that isn't achored to structure. You can't hand a light in a box that pinches dryway, that's a retrofit box at best. Cool concept though.

@johncomments2730 2 года назад

The narrator states it's holds 6 pounds something ounces. It's a wasteful and silly hack if you ask me

@robsmith4884 2 года назад

You know where the studs are BEFORE you drill right? You’re remodeling and you hang backer board exactly the depth needed. Then you install the drywall, then install the box. Saving you the time of installing the box and cutting the hole.

@Harry-zz2oh Год назад

@@robsmith4884 I've done a bit of remodeling and making an accurate box hole has always been a pain. This makes it much easier, especially since you have the wire inserted first, then you cut it in.

@bobuncle8704 2 года назад

You really should talk about costs when talking about technology. Those laser rust removers are massively expensive. The 2000 watt systems are upwards of $60,000. Some of the cheapest units that will barely do anything are about $4,500. This is not a technology for the faint of heart

@achicken6477 Год назад

WELL 2000 watts will vaporize metal in milliseconds ... A 80watt laser is pretty good at cutting thick wood relatively fast . So yhea

@Luke-xx1ri Год назад

😂

@jackcai3308 Год назад

Chinese 2000w only 20K

@jackcai3308 Год назад

@@achicken6477 I just purchased 3500w from Wuhan, China. 3500w emitter only cost $12000.00. including laser header (automatical adjustment), cooling system and power unit.

@ElmoresGuitarsInc Год назад

Give metric measurements and weights please...

@charlesouko4253 Год назад

Hi Tech Zone You featured a multi purpose sharpening tool in one of your videos . Can you help me identify the product,for purposes of being able to source and purchase it. It is predominantly orange in colour. Table mounted About 7inches square and similar height. If I recall correctly the price was some $50 something odd dollars. On your video were the words " tools inaction". Please help me source it. Thx

@bonnitaclaus2286 Год назад

The jack that you showed did you pump up…. I have 4 of those. They work wonderful. I was able to move a 50 gallon fish tank and it’s stand. I started with nailing and screwing a Lip on its side just so I can get it up high enough that I can slip it underneath. That’s why I needed two of them. It would’ve been nice to have 6 pumps. But I managed was just the 4. The 50 gallon tank was half full of water and I was terrified of a tipping over.

@robkj7575 Год назад

Like to know prices of these tools. Tks

@monotheis6889 Год назад

The offset hammer has been in use for many decades already. Several purpose-made styles have been in my fathers' and grandfathers' toolbox, and I'm in my 50's. Click bait

@sanethinking4949 Год назад

Nice bro

@user-hd1un3jx3y 2 года назад

👍👍👍

@Xanderfied Год назад

I have an inflatable jack, course others call it a childs swim fin.

@banmadabon 2 года назад

11:38 HODOR! HODOR!😆

@NSBarnett 2 года назад

A sixtyfive point six foot cable ! ! ! Har har har

@tronghungdao251 2 года назад

👏👌👍💖💖💖

@stianmindewaldenstrm1306 Год назад

Katimex for people who do not have a vacuum cleaner in the house?

@robertbrown5620 2 года назад

No roofer is using this tool.Nailguns are standard

@Harry-zz2oh Год назад

This would work when replacing individual shingles. You are right about the nailgun, but then when installing a total roof, you will have it available.

@donaldstewart9873 2 года назад

👍

@robertpickett6741 2 года назад

👍🏻😎

@toptechworld_3d839 2 года назад

Techzone , your channel is really inspiring and it’s wonderful to learn new things from it. Keep doing what you are doing ❤️

@donaldstewart9873 2 года назад

The pipe cutter cuts "Up to 1/8 thick" pipe, and they show them cutting 1" thick pipe? Is the speaker right, or the video???

@ReedPipeTools 2 года назад

The cutter cuts with 1/8 inch of square. It cuts thick PE, yes. He missed the detail, I think.

@bukkachandram2366 2 года назад

First view and like and nice video

@techstuf4637 2 года назад

KUDOS....for actually including your thumbnail pic items in your videos! Too many clickbait channels! Earned my Sub!

@toptechworld_3d839 2 года назад

I know right, I just started mines and trying to do the best I can to make sure everything matches and not clickbait

@billtaylor2050 11 месяцев назад

I already own a pair of inflatable bags for lifting and they are so useless I've kept them as I must be doing something wrong after only fifty three years of engineering experience.

@theboisplay7845 2 года назад

noice

@aronnagy6442 Год назад

prices?

@saulogabrielmontanarorosa289 2 года назад

⬆⬆techzone is best channel

@PPPDCO 2 года назад

Smart Box, hmmm cutting ring comes off the box after cutting the hole. All the “smart boxes” come with the cutting ring along with the cost associated for it and apparently is just thrown away since all the smart boxes have them. I have a great idea, why not have a drill with a hole saw the size needed to make a hole for a, oh I don’t know maybe a dumb box. Less material needed, less cost for the product and less steps required to install a dumb box. Sounds like the smart box is made for dummies.

@AlexJonesWasRight1776 Год назад

LOL this " Smart box idea" does fit the " Woke global agenda of the NWO" In the future you will own nothing , have nothing and eat bugs.

@philippebleau4809 Год назад

Metric units please

@nunyabiznis3595 Год назад

Is it just me that has a problem with decimal inches ie 3.4 pounds or 2.45 inches? just use metric.

@edwardneale8775 2 года назад

Did I hear right it cuts pipe UP TO 8th of an inch why ???????

@aaronscalise7682 Год назад

lol @ that pinch machine, i mean riveter.

@1LonePuma 2 года назад

*IT'S ENCOURAGING TO SEE THESE NEEDED TOOLS ARE MADE IN THE UNITED STATES AND NOT CHINA OR SOME OTHER THIRD WORLD COUNTRY, WE WILL ALWAYS BUY TOOLS MADE IN THE U.S.. OF A. BEFORE ANYWHERE ELSE!!*

@Rob-fc9wg 2 года назад

Caps lock?

@deejaudible Год назад

What are some brands that are made in America?

@michaelparker5030 2 года назад

Hmmm 🤔 I definitely hate the way you say 0.08 inches.

@javierirlas2277 11 месяцев назад

Y😊

@rubikscubemadeeasy3142 2 года назад

Second!

@bogdanexit1 2 года назад

you are a tech channel and you use imperial measure ?????

@hectorkeezy1499 2 года назад

Horrible narration, But good content. 👍🏻😊🙋🏻‍♂️

@rubikscubemadeeasy3142 2 года назад

Second

@bad71hd Год назад

NAUGHT? ALU MINI E UHM? DAFT PRATT

@hogofwar0 2 года назад

silly tools

@alaskarayblog 2 года назад

First

@PUKTTAMEDIA 2 года назад

Hi Alaska

@alaskarayblog 2 года назад

@@PUKTTAMEDIA how are you doing

@asmodeus5326 Год назад

There is no way the acoustic removal tool works anything like that i remove the stuff for a living and i can tell you that tool is BS

@Cadaverine1990 2 года назад

The Shark tooth box is not worth it at all at $7.50 USD.... I'd rather buy a hole saw made for electrical boxes and is made of metal for $25. I can then use the $2.00 USD boxes instead.

@hillbillymal9351 Год назад

That engine valve seat tool shouldn't be on the market let alone in this video, he turned it to set the valve sea and it was all over the place and then dropped the valve in and was looser than my ex-wife

@jeremyhansen9834 Год назад

This is by far the worst.

@joefisher7792 Год назад

Yeah for the guy who was making the video nothing new dude nothing f****** new

@user-co3wv7us5u Год назад

Know yuossef istis

@bluefalcon1952 2 года назад

What is "owwyoumeneum"?

@giladshahar 2 года назад

When you'll stop been self centred and start using what the rest of the world uses the metric system...

@-CHaPPy- 2 года назад

This is a redo video 👎

@ElShotte 2 года назад

Jesus friggin Christ how many times can you use the same damn music tracks in these videos. At 3.5 mil subscribers one would think you can afford a few more tracks.

@goodarzdalvandi5940 Год назад

همچین شصت دستت رانشان میدی کسی نفهمه فکر میکنه سفینه ات تو مریخ نشست کارت بدک نبود ولی حرکتت حال به هم زن بود

@masisisaghoolian9356 Год назад

my friend how many times I have to complain your voice is very heavy how many times I don't understand what the hell you are talking about your voice is terrible I would fire those who hire you first and you are the second