Тёмный
No video :(

Amazon Sprinter Van Technician! Toolbox Tour | Cornwell XL Tool Cart W/ Power Drawer 

Tool Box Tours
Подписаться 28 тыс.
Просмотров 46 тыс.
50% 1

Trevor is a Mercedes automotive technician with a focus on the Sprinter Van line. His setup is super mobile and it was great to see what it’s like inside of a Mercedes dealership shop. I absolutely loved seeing the tool grid system as well. Top notch! Thank you Trevor!
Here are some Amazon Affiliate Links for some of the tools in the video. As always, prices fluctuate, so prices posted in the video are from during filming.
uvBEAST UV Flashlight - amzn.to/43PfDj5
Knipex 7.25” Cobra Pliers - amzn.to/41LUYus
Gearwrench ½” Torque Wrench - amzn.to/3HtSedx
Gearwrench Puller Set - amzn.to/3AeEz5Z
Casoman ½ Impact Deep Socket Set - amzn.to/40mczYN
Milwaukee M12 Right Angle Impact - amzn.to/3GXyZJ2
Milwaukee M12 Long Head Ratchet - amzn.to/3AhZ6X7
Milwaukee M18 ¼” Impact Driver - amzn.to/3UVUpMi
Milwaukee M18 High Torque ½” Impact Wrench - amzn.to/43PYvcQ
Gearwrench Scraper Set - amzn.to/3UVVBiy
Teslong Borescope - amzn.to/3AiPcED
#snapon #cornwell #matcotools #mactools #automotive #automotivetools #automotivetechnician #autotools #toolgridsystem #organizationhacks #organization

Опубликовано:

 

14 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 87   
@trevorsearcy9788
@trevorsearcy9788 Год назад
It’s great to see all the positive comments on my set up! It’s not big and fancy but it’s as all techs say “a work in progress” i just ordered more tool grid attachments to fine tune the organization such as tool grid wrench holders, more socket holders, and lots more.
@ToolBoxTour
@ToolBoxTour Год назад
It’s never ending! 😅
@Shade_Tree_Mechanic
@Shade_Tree_Mechanic Год назад
The tool grid organization looks amazing. I'm going to have to order some now
@eliezerramosjr1017
@eliezerramosjr1017 10 месяцев назад
Same just space oriented. ❤️
@IMPACTRATED
@IMPACTRATED Год назад
How did no one ever think of going around doing tool box tours? Lol its actually a great concept! Another awesome video!🤙🏾
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for watching!
@almightyracing
@almightyracing Год назад
I love how clean their shop is. The shop I work at could never look like this
@ToolBoxTour
@ToolBoxTour Год назад
Same here. The last shop I worked for had a layer of grease we walked all over. Basically 40 years of grime stacked on top. Thanks for watching!
@d0uble_O
@d0uble_O 3 месяца назад
thats Mercedes for ya, in all aspects really. Very surgical/hospital vives 😅
@WA-zl6ju
@WA-zl6ju Год назад
I enjoy your videos. I appreciate you adding tool numbers. The interaction and explanation from the various techs is awesome. Thanks for posting.
@ToolBoxTour
@ToolBoxTour Год назад
Glad you like them! Thanks for watching!
@markm0000
@markm0000 Год назад
I agree the part number and price is amazing 👌
@madamandmeatball
@madamandmeatball Год назад
Cornwell, low key makes some nice ass boxes. I would of killed to have that cart in all my years of work.
@ToolBoxTour
@ToolBoxTour Год назад
Pictures of these cars just don’t do them justice. They’re so big!
@JOHN-fx3xo
@JOHN-fx3xo Год назад
I’m doing that light setup. So awesome. Thanks for the tour.
@ToolBoxTour
@ToolBoxTour Год назад
That light makes it look like the shop was dark, but it was just SO bright! Thanks for watching John!
@mattreid8768
@mattreid8768 6 месяцев назад
The more I see these Cornwell boxes the more I want one. Trevor has a really nice setup.
@ToolBoxTour
@ToolBoxTour 6 месяцев назад
Yeah they’re super nice. And this one is massive!
@johnmattingley2751
@johnmattingley2751 Год назад
I work on nothin but sprinters in Alaska. Cool stuff!
@ToolBoxTour
@ToolBoxTour Год назад
That’s awesome! Thanks for watching from Alaska!
@jameschristensen662
@jameschristensen662 Год назад
This is an awesome setup. Love to see the transition between beginning and experienced techs. Cool to see a lot of the beginner tools still hanging about. So many great options these days.
@ToolBoxTour
@ToolBoxTour Год назад
Yeah I mean if they work, they work 🤷‍♂️😄. Thanks for watching James!
@mn4a15
@mn4a15 Год назад
This was a really nice box. I was thinking you should do celebrity RU-vid Mechanic box tours like Scanner Danner or eric-o or super Mario would be awesome
@ToolBoxTour
@ToolBoxTour Год назад
Some day! Thanks for watching!!
@bigairtrix2
@bigairtrix2 Год назад
I like how clean his tools are.
@ToolBoxTour
@ToolBoxTour Год назад
Right? Nothing beats clean tools! Thanks for watching!
@ianloyd6384
@ianloyd6384 Год назад
Loving this channel man! I enjoy how you go to different shops in different fields- auto, moto, RV, etc Good stuff man! 🙌🏻
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for watching Ian!
@Mattman9826
@Mattman9826 Год назад
The quality of these videos is off the charts man, thanks for providing such great content 🤙🏻
@ToolBoxTour
@ToolBoxTour Год назад
Thanks Matt! That means so much 🙏
@ramtruck2011able
@ramtruck2011able Год назад
Do you go around to local shops and ask random techs if they would be willing to do a toolbox tour? I think this is pretty awesome
@ToolBoxTour
@ToolBoxTour Год назад
Some times I do that. I usually just solicit on marketplace - offering a tool in exchange for a tech’s time.
@Sean-bp6xb
@Sean-bp6xb Год назад
I love that you do this. I enjoyed seeing this vid. Thanks. Watching from Ontario Canada 🎉
@advancedleveldiagnostics
@advancedleveldiagnostics Год назад
Wow that tool grid is really cool, Thanks for sharing!
@ToolBoxTour
@ToolBoxTour Год назад
I thought so too! Thanks for watching!
@wendellgreenidge3362
@wendellgreenidge3362 Год назад
I love your tool box tours, your commentary is spot on. You ask all the right questions. Keep it up
@ToolBoxTour
@ToolBoxTour Год назад
Thanks Wendell! I’ll keep making them as long as people watch them 🙂
@coreymartin-wk1fi
@coreymartin-wk1fi Год назад
Nice little setup. So many different ways to set up a box! I'm diggin the channel👍🏼
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for watching!
@james5274
@james5274 Год назад
Cool tool grid! That's sick, in a perfect world I would do all my tools in tool grid. The dealer I work at has those Rousseau boxes and I'm not a fan. I miss working out of my snap on box everyday. Awesome video the subscribers are pouring in dude, keep up the good work! I can't wait till you have like 50k subs and I can say I'm an og from before you even had 1k 😂👍
@ToolBoxTour
@ToolBoxTour Год назад
😂 thanks for watching James!! Hopefully the channel keeps growing!
@tannerivie8773
@tannerivie8773 Год назад
Good stuff it cool to see the tool difference in each box
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for watching tanner!
@nickbakey9188
@nickbakey9188 7 месяцев назад
mac truck been my favorite too we lost our mac driver had a new one next week
@automusicsports216
@automusicsports216 Год назад
What a great channel! Love the tool box tours! That cornwell box/cart was sick 🔥
@ToolBoxTour
@ToolBoxTour Год назад
Thanks! And thanks for watching!
@sugarskulllyfe5890
@sugarskulllyfe5890 7 месяцев назад
I wish we could have seen his van specific tools for getting in all those nooks and crannies
@markm0000
@markm0000 Год назад
Dang that light is a smart idea.
@ToolBoxTour
@ToolBoxTour Год назад
I thought so too! Thanks for watching!
@markm0000
@markm0000 Год назад
@@ToolBoxTour every toolbox has a trick up its sleeve. At this rate, I’m learning so much about tools I never seen, it’s making everyone else mad jealous.
@markm0000
@markm0000 Год назад
@@ToolBoxTour you should make a summary video after every 5 toolbox videos and point out things you liked the most or what got commented the most. Then answer a few questions people had so it doesn’t get lost in the comments. Thanks
@ToolBoxTour
@ToolBoxTour Год назад
That’s a fantastic idea Mark! I may have to implement that!
@chrispollock7507
@chrispollock7507 Год назад
Sweet setup
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for watching Chris!
@durakito2979
@durakito2979 Год назад
is it possible for you to do more Euro Dealer technicians and Asian like Honda. Great video by the way👍
@ToolBoxTour
@ToolBoxTour Год назад
As soon as I get someone that would like to give me a tour, I will get it posted!
@TalkinTools
@TalkinTools Год назад
Tool grids area love hate in my book, It looks so clean and dialed in but I can't get over some of the drawbacks but thats a hell of a deal on one! Awesome setup, those Cornwell carts and boxes have been peaking my interest lately 🤘
@ToolBoxTour
@ToolBoxTour Год назад
I’m curious, what are some of the drawbacks from your perspective? Thanks for watching!
@TalkinTools
@TalkinTools Год назад
@@ToolBoxTour To start let me just say I feel like there is pros and cons to any organization setup you can find out there. For one is the cost of a tool grid as he stated, he got a killer deal on that kit which is probably like $400-600 normally. For that price point you can buy a lottttt of quality organization products. My biggest gripe about a tool grid is that you are quite literally locked into using what layouts are existing. So if you line your sockets up in a row at some point a socket will be too big to occupy one tool grid hole and then you have to jump to the next hole, creating a gap in your row and spacing out that line of sockets. This is inevitably going to happen again and again as the sockets keep getting bigger. And there is no way to tuck tools closer to one another even though there may be space the option on that screw board doesn't exist. I not here to knock anyones choice on their layout, I absolutely love how a well thought out tool grid looks. But there are instances in my own box where I would not have the space to fit something because it limits you to predetermined positions.
@ToolBoxTour
@ToolBoxTour Год назад
Thanks for your input! I have been in the market for some tool organization systems for my personal box, and there’s just so many to choose from. I will take what you say to heart when I’m getting ready to purchase. 👍
@TalkinTools
@TalkinTools Год назад
@@ToolBoxTour I've spent a lot of time staring at my drawers and studying the tools I own to make them all fit in my setups as efficiently as possible lol. Every box and tool collection is different so don't just go by my opinion, really sit there and measure things out, move stuff around, and study how it can all fit together and the layout thats best for you will eventually present itself!
@kevindunham9434
@kevindunham9434 Год назад
@@TalkinToolsI’m a cornwell dealer, and I’ve never had a drawer cost more than $250-$300 at full retail, just for reference. That’s with the board and pieces for 1/4, 3/8, 1/2, and ratchets.
@jacksg5430
@jacksg5430 9 месяцев назад
That dead blow hammer has seen better days
@ToolBoxTour
@ToolBoxTour 9 месяцев назад
😂
@tonycroteau9264
@tonycroteau9264 Год назад
Great video 👍
@ToolBoxTour
@ToolBoxTour Год назад
Thanks Tony!
@FernandosReef
@FernandosReef 14 дней назад
I have the same box what’s the tool grid board measurements for it ?
@MrJuanmartinez841
@MrJuanmartinez841 Год назад
Had new mac guy for about 4 years started buying . Then no showed in last 4 months !!
@ToolBoxTour
@ToolBoxTour Год назад
Oh no! But that’s how it is! Hopefully we can get more reliable drivers in the future. Thanks for watching!
@user-vd2ji8zc2k
@user-vd2ji8zc2k Год назад
What is the tool chest?
@nickayivor8432
@nickayivor8432 Год назад
Wow 👍
@ToolBoxTour
@ToolBoxTour Год назад
Thanks Nick!
@fishingmontana1564
@fishingmontana1564 Год назад
I want dewalt to make the right angle impact if they dont come out with one soon thats better than the kobalt i am going to get the kobalt cheaper and battery are cheaper and for a second battery platform i cant justify getting milwaukee
@ToolBoxTour
@ToolBoxTour Год назад
Yeah at Kobalts price point, they’re hard to beat in terms of value. They make a decent assortment of tools as well.
@fasteddie8225
@fasteddie8225 Год назад
Dude is this in Utah?
@ToolBoxTour
@ToolBoxTour Год назад
Sure is! Thanks for watching!
@markm0000
@markm0000 Год назад
You look really similar to another youtuber Changing The Industry Podcast. He’s got more of a southern accent but I thought it was interesting how similar he looks.
@ToolBoxTour
@ToolBoxTour Год назад
Haha I’m not sure if I should be offended or flattered. Either way, thanks for watching 😆
@col.greasebagmcqueen9933
@col.greasebagmcqueen9933 Год назад
Amazon van techs are cool. Amazon drivers suck. They delivered the same package to two different houses in my neighborhood, and my wife had to spend 4 hours driving around the neighborhood to find out where it was sent.
@manuelbou2576
@manuelbou2576 Год назад
7:32 please tell him torque conversions exist 😅. He doesn't have to have a specific newton meter tq wrench for German.
@markm0000
@markm0000 Год назад
That’s true but having to convert every single torque spec from the book gets annoying after a few days.
@trevorsearcy9788
@trevorsearcy9788 Год назад
lol tech in the video here, of course I know I can covert in lb to nm and I have but like the above comment that gets old and it’s nice having the right tools for the job. Plus my 1/4 torque wrench is one of my first ones I ever got and it’s from harbor freight
@manuelbou2576
@manuelbou2576 Год назад
@@trevorsearcy9788 I get that but I've been using tq wrenches for 18+ years i still can't justify paying for another just just to avoid pulling my phone out and using my calc app in 5 secs. Having the correct tq wrench ranges for your job is more valuable than having 15 of them in different units of measure
@mtiger5
@mtiger5 Год назад
500 for a tap and die set .... fuhhhh, lol
@ToolBoxTour
@ToolBoxTour Год назад
😅
Далее
Sevinch Ismoilova - Xayollarim 18-Avgust 19:00 Premera
00:19
The Tools You Need To Fix Cars At Home!
19:53
Просмотров 86 тыс.
The Ultimate Builder Tool Van! 🚐
2:30
Просмотров 8 тыс.
I Bought A Pallet Of ACE Hardware Returns for $1176.13
14:28