AMP BedExtender HD Cargo Manager Unbox & Installation

Подписаться 70 тыс.

Просмотров 53 тыс.

50% 1

AMP Bed Extender: imp.i128439.ne...
This is an unboxing, installation, and review of the AMP BedXTender HD Max. This is a perfect addition to create a very functional cargo space in the bed of any pickup truck
Catch me on Social Media:
compiled.socia...
I earn a small percentage from affiliate links. When you purchase from one of these sponsors, it costs you $0 but helps support the channel.
Gear Sponsors:
5.11 Tactical: 511.pxf.io/qnbXNj
Acme Tools: acmetools.pxf....
Ariat Boots: ariat.dkkdet.n...
MyMedic: bit.ly/3GxctGr
Truck Sponsor:
RealTruck: imp.i128439.ne...
Motorcycle Sponsors:
DynoJet: bit.ly/3KMWc2R
Cycle Gear: imp.i105279.ne...
J&P Cycles: j-and-p-cycles...
Revzilla: imp.i104546.ne...
My camera gear since 2022 for those who are wondering:
Panasonic LUMIX S5II Mirrorless Camera: amzn.to/3Gwi9k0
Panasonic Lumix S Pro 16-35mm: amzn.to/3UqJnhR
Rode NTG (on cam): amzn.to/3KPXF8I
DJI Mic: amzn.to/3o2Otos
Sennheiser MKE 2-EW GOLD (In helmet audio): amzn.to/40UBDXR
Catch me on Social Media:
compiled.socia...
#Gear #Gadgets

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@blazingacres3441 2 года назад

does the bed extender prevent the tailgate from flapping up and down when it's open?

@froggymountain Год назад

AMP HD Sport I installed had the bracket with three 9/64 holes to drill. Installed without taking off lenses. EZ install and very effective unit. I had board screwed together for a unit I had to take in and out of the truck. Effective, but heavy. Like the AMP much better.

@HossoUb Год назад

Is there an anti-theft lock available for this? It seems like the thief could easily just pull it out and walk away with it.

@irishpotato8816 Месяц назад

adding this to my 8 foot bed

@jefflebowski3319 Год назад

I noticed that you did not use any primer after drilling for the brackets. Is this because you have a spray-in bed liner?

@GearsGadgets Год назад

Yes, it's also because live in Arizona and am not nearly as worried about rust as I was when I lived in Western New York and had to deal with road salt. Ultimately any paint on the freshly drilled surface would be smart, you just caught me cutting corners not caring because of where I live.

@rashwood4790 6 лет назад

I hate reading instructions and your video was just what i needed. Thanks.

@GearsGadgets 4 года назад

Thanks R Ashwood, I appreciate it!!!

@Arthurmd22 Год назад

Do you still recommend??

@mweezy 6 лет назад

Can the bed extender be removed or stolen when its not extended and the tailgate is shut and locked with a key? Thanks,

@GearsGadgets 6 лет назад

No. The hinges only allow removal when it is at about a 45 degree angle in the open position. If the tailgate is locked and closed it couldn’t be removed at all.

@mweezy 6 лет назад

Tech Chex OK, thanks. I'm planning to buy one in the next couple of weeks. ☺️

@FragBenitez 5 лет назад

@@GearsGadgets great design then

@j.s.2623 5 лет назад

Never hold a torque wrench the way you are in this video always hold it by the handle. The torque will not be correct holding I your way.

@GearsGadgets 5 лет назад

Thanks

@jamspr6544 4 года назад

Thanks, I follow step by step your video . Very nice. Super Happy with my Bed X Tender!

@GearsGadgets 4 года назад

You are welcome JAMS PR.

@shawnflynn8609 3 года назад

Where can I find an extra template, i did not come with one?

@GearsGadgets 3 года назад

Hmmm, check their website for install instructions? Thats my only guess

@billk8429 5 лет назад

With the spray in bed liner - which center punch position did you use from the template to drill your holes? One is for a drop in bed liner and one is for no bed liner. Assuming the spray in liner falls somewhere in between the 2 options.

@GearsGadgets 5 лет назад

Bill Kennedy I went with the no bed-liner I believe. The spray in liner is much thinner and form fitting than those drop ins.

@billk8429 5 лет назад

Gears & Gadgets thank you!

@Crazyfootballguy 6 лет назад

Are you sure you can put 4x8 sheets in there? that curved corner looks like it cuts it off.

@GearsGadgets 6 лет назад

+Crazyfootballguy Yes, the plywood fits between the wheel wells, the corners cut basically in the same footprint of the wheel wells where the plywood wouldn’t be. Also with a 6.5 foot bed you get 6’-8 1/2” to the tailgate so you only need to use 1’-3 1/2” of he tailgate which is approximately 1’-9” which also means the radius portion is out of the way. Hope that helps. If you have the 5’-8” bed then your SOL.

@brussell0001 6 лет назад

Thank you, this is what I was looking for, too. Great video.

@ericbuller7079 5 лет назад

Crazyfootballguy I

@RagingRapids311 6 лет назад

How do you know which template to use???

@GearsGadgets 4 года назад

The instructions tell you pretty good.

@rogeurfrancois160 6 лет назад

What truck did you install this on?

@GearsGadgets 6 лет назад

Rogeur Francois 2015 GMC Sierra

@rogeurfrancois160 6 лет назад

Tech Chex & Motor Vlogs thx

@Me-mo7kf 6 лет назад

Hello? What brand tonnoeau cover do you have?

@GearsGadgets 6 лет назад

That Tonneau cover was the LUND Genesis Elite amzn.to/2RkXSSD. Just check and make sure its the right model for whichever truck you own. I rocked that cover for a few years and it was incredible.