an ultimate Guide to Cleaning a Graco Ultra QuickShot airless sprayer

Phil Beckwith The Professional Painter & Decorator

Подписаться 11 тыс.

Просмотров 6 тыс.

50% 1

Cleaning a Graco Ultra QuickShot. In this comprehensive video tutorial, discover the ultimate guide to efficiently cleaning the paint out of your Graco Ultra QuickShot. Follow along as we walk you through a step-by-step process, sharing valuable tips and tricks to make the cleaning task a breeze. Whether you're a seasoned professional or a DIY enthusiast, our expert advice ensures a hassle-free maintenance routine, keeping your Graco Ultra QuickShot in top-notch condition. Say goodbye to paint build up and hello to a smoothly operating sprayer with our easy-to-follow instructions. Watch, learn, and elevate your paint spraying experience!
Amazon links......
Pump Armor
amzn.to/477Xtdq
Don't forget to Subscribe to the channel / @professionalpainterde...
Please Support The Channel either with SUPER THANKS via RU-vid
or
Buy Me A Coffee/Pizza/Beer
www.buymeacoffee.com/ProPaint...
I now have a Amazon StoreFront*, please have a look.
www.amazon.co.uk/shop/philbec...
Check me out on the other Social Media sites
FaceBook
profile.php?...
Instagram
/ beckwithdecorators
* The Legal Bit*
* The links to Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do as I'm part of the Amazon Associate programme. I have to make you aware; as an Amazon Associate I earn from qualifying purchases.*

Хобби

Опубликовано:

19 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@worthingdecorating8506 Месяц назад

These video ls are so informative. Mr back is also so attentive with the comments. He's answered every question asked in these comments. Just what a man. He's really out to help people be as good as him.

@ProfessionalPainterDecorator Месяц назад

Well.... LoL. That's a hard goal to achieve lol

@worthingdecorating8506 Месяц назад

@@ProfessionalPainterDecorator I would like your opinion why Tikarilla is best for spraying? Have you already done a video on different products / thinning wise. Today I used Dulux MDF primer undercoat thinned by about 30%. I thought I was clogging the machine with it but I think it was because I created a vacuum leaving the gray pot sealer on.

@ProfessionalPainterDecorator Месяц назад

@@worthingdecorating8506 DM'd you

@edwindejong9679 6 месяцев назад

Thanks! Greetings Holland

@ProfessionalPainterDecorator 6 месяцев назад

Welcome!

@mansionspawn639 7 месяцев назад

Fantastic video phil. Other videos on the quickshot pointed out that the gun leaks paint ever so slightly while spraying. Did this happen to you?

@ProfessionalPainterDecorator 6 месяцев назад

Can't say I noticed. If it's around the guard.. tighten it a bit more. I was using my Guard and tips though

@mansionspawn639 6 месяцев назад

@@ProfessionalPainterDecorator thank you for the tip and also for the time you take to make these videos. 💯

@BK-gc1jm 5 месяцев назад

Besides putting a plastic bag over the machine for over spray .what can I put on my gun to stop over spray? Cleanup..thx

@ProfessionalPainterDecorator 5 месяцев назад

you won't get a lot of overspray with this mashine, setiing 5 is plenty of power on most paints. sparying water based paints you can clean with warm water, if you still have some suick on, use some Meths.

@orbitalforest 7 месяцев назад

Just to clarify Phil you put a bit of vaseline around the screw thread for tip guard and around the inside thread of plastic lid ? Was there anywhere else ? Also i left an egg cupful of pump armour in the bottom of the pot should i wipe that out or is that ok left in there ?

@ProfessionalPainterDecorator 7 месяцев назад

On this Quick Shot there's only those threads. I also did some on the clip that holds the white pot in place, just to make it easier to slide into place Yes.. keep a bit of pump armour in the bottom once flushed through on prime and spray. You'll flush it out with clean water next time before you put paint in.

@kimchee94112 6 месяцев назад

Pricewise it's in the Fuji professional HVLP range. I go Fuji with the electrical cord although cordless would be nice.

@ProfessionalPainterDecorator 6 месяцев назад

Hvlp or Airless..... Two different srayers though.

@kimchee94112 6 месяцев назад

@@ProfessionalPainterDecorator I know, I have 3 airless all with wheels for 5 gal paint buckets including an old Binks setup. The only airless (HVLP hybrid) I trust for fine finish was the old Milwaukee M4910-20.

@mananddog9884 5 месяцев назад

So do you always leave a small amount of pump armour inside the sprayer when not in use? Especially if your not using it for long periods? Thanks

@ProfessionalPainterDecorator 5 месяцев назад

Just enough to be worked across the pump. Then when you come to use next time.. flush some clean water through before your paint.

@AlfGuitar 7 месяцев назад

Hi mate, how would you deal with flaking gloss paint? Would you remove all of it and then just restart the process or is there a way around repairing glosswork? P.S it’s oil based but I want to have a water based finish

@ProfessionalPainterDecorator 7 месяцев назад

I had thisthe other week, I removed as much as I could, mira sanding and a blade. then used 2x Aqua BIN. video out in a few weeks.

@alexandrucristian6160 2 месяца назад

What happen when you put Shelac (bin primer if you have that pump cleaner inside ) you know what I mind water and Shelac

@ProfessionalPainterDecorator 2 месяца назад

what do you mean? The cleaner/Thinner for Zinsser BIN (red can) is Meths, NOT water.

@alexandrucristian6160 2 месяца назад

@@ProfessionalPainterDecorator If you've used water-based paint and now need to switch to shellac primer with the same spray gun, it's crucial to ensure the gun is completely dry. Even after cleaning, some water residue may remain, which could affect the primer's performance. We need to Ensuring the gun is free of water residue will prevent any issues when applying the shellac primer, ensuring a smooth and effective application.

@ProfessionalPainterDecorator 2 месяца назад

@@alexandrucristian6160 so what you do is clean the wb out with water, once thats all out, flush some meths through it, then put you shellac based product in it.

@BK-gc1jm 5 месяцев назад

So how often do you use your machine . I am very anal about my equipment .I like it looking new for as long as I can. I paid for it. I use it , I clean it .I have been using for years a hopper on my 395. Now I can use quart or liter of paint.

@ProfessionalPainterDecorator 5 месяцев назад

as and when i can. not all the time, but not every job warrants a sprayer on it