Andis Masters Hair Clippers: Tuning, Service And Repair For A Kick Ass Performance

Подписаться 34 тыс.

Просмотров 317 тыс.

50% 1

Tuning & Service your Andis Masters clippers for a kick-ass performance, after a fall, or in general. After the fall of this Andis Masters hair clipper, it doesn’t have to be the death of it or a strain on your wallet. In this demonstration, I will show you how to perform a full service and hair clipper repair on your Andis clippers that aren't cutting on an Andis Masters so you can get a kick-ass performance so they are at their best once more - without having to call Andis customer service.
If you liked this tunning and services tutorial, be sure to subscribe for more interviews, lessons, and other fantastic free barbering content. I’d also like to invite you to follow me on Instagram @larrythebarberman as well as check out my Facebook page at / larrythebarberman pages for other free barbering content. You can also email me at info@larrythebarberman.com.
USEFUL BARBER LINKS
/ larrythebarberman
/ larrythebarberman
www.larrythebarberman.com
=================================================
Email info@larrythebarberman.com
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebarberman.com ( My Online Store )
=================================================
Barber Blogs: larrythebarberman.com/blog/20...
================================================
Hair Clipper Converters: www.frequency60hz.com
info@frequency60hz.com
=================================================

Хобби

Опубликовано:

24 апр 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 239

@Begging4Change 3 года назад

I have a pair that’s 16 years old, still working, just replaced cord and adjusted them and they still work like new. Andis is the master!

@larrythebarberman 3 года назад

GOOD STUFF!!

@Moeonit Год назад

Me too but 22yrs strong and both pair of outliners too

@electricsheep7633 6 лет назад

Larry, I cant tell you how long I've looked for a video breaking it down step by step like you have done here. Man, thank you so very much!

@larrythebarberman 6 лет назад

your welcome!!

@blacafrikan9876 4 года назад

Thank you

@theoldbigmoose 3 года назад

You saved my clippers to Larry! I wish the cord on the Andis Masters was a softer more flexible silicon though.

@glennharaldsen3222 6 лет назад

Tears of joy! These clippers have put my mother Andy I through beauty school over 20 years ago and when I dropped them my heart broke because my mother passed away shortly after she graduated. Thank you so much for helping me bring them back to life!! They are really all I had left of her and I thought it was over. Thank you again from the bottom of my heart Larry! - Angela

@glennharaldsen3222 6 лет назад

And I* sorry I was literally crying😂

@courtneywilson1373 3 года назад

Thanks for the help

@rain3743 Год назад

Mine too! I dropped and jacked them up and hadn't done anything with them. I am gonna try this.

@LilArt2k6 5 лет назад

I thought my clippers were done for...Thank you!!!!!!!!

@isaacaugustin2483 3 года назад

Larry broke it down he even has props!! 🔥🔥🔥🙏🏽

@mikep7585 4 года назад

Larry many thanks this was a a game changer. I restored my 20+ yr old Andis Master clippers with a new motor and replacement parts. After taking the entire thing apart I couldn't get them to cut right. It turned out I hadn't adjusted the tension correctly. Thank you so much for showing this. Much blessings stay safe !

@williamswink5144 7 лет назад

THANK YOU LARRY! My Masters were acting funny so I looked at the Andis videos and Ivan calls the "2 hole screw" the "Dont EVER touch" screw, instead of explaining its function... which is helpful if you want to understand your equipment!! Turns out the mechanism reset is EXACTLY what my machine needed! Thank you again!

@angelawalters1975 4 года назад

William Swink for real !!! Everyone has always said do not open up your masters it ruins your warranty and they make you so scared of it thank you Larry for teaching us how they actually work makes our job so much easier

@angelawalters1975 4 года назад

Everyone has always said do not open up your masters it ruins your warranty and they make you so scared of it thank you Larry for teaching us how they actually work makes our job so much easier

@Lorenzopphotography 5 лет назад

Thank God for people such as yourself!! My clippers have been broke for nearly 3 years after a fall, I tried my luck searched some videos and boom you were the first video I watched and now my clippers work. Amen!!!!

@gringocutz6915 5 лет назад

Bro, dude you seriously saved me a lot of money man. I loved how my clippers worked before they fell and this brought them back instead of buying new ones. Thanks so much!!!

@Judgement220 5 лет назад

Thank you Larry, I was clueless before I watched this video.

@barberajasbbarber2599 3 года назад

Video was a big help waiting 3years to find a video like this mate appreciate it now my clippers are gonna be on another level 🙏🙏🙏🙏

@ryanhill7318 6 месяцев назад

I know this is an older video, but this helped me fall in love with the Masters. Thanks Larry! I like to tinker with my clippers and the Masters really have a lot of tuneability in them. I found after watching this, that I can run the power higher, with slightly higher tension and they really blast through hair. It effects heat slightly, but regular oiling definitely helps. I think this clipper is overlooked in 2023 because of their maintenance needs. I feel like its actually a benefit

@emilymitchell3393 7 лет назад

Thank you so much!!! You saved my clippers!!! I was about to order a new pair!

@michaelsanchez8519 7 лет назад

Great video Larry. Your video helped me understand hair clippers. I had no Idea it was such an easy design. Very little troubleshooting involved. Thumbs up for sure 👍

@rayrivera3374 4 года назад

Thanks for the info I found my old Andis Masters and this helped me tune them back up. Now they are cutting lie new again.

@yozy4996 3 года назад

Excellent job Larry..Thank you.

@reddsofine1 3 года назад

Just tuned mine and it worked perfectly. I was about to buy a new pair. Thanks for this!!

@TheNewChicagoland 6 лет назад

Took me a couple times to get it right. Also watched other people’s videos incase steps were missed here. When I came back and followed your steps again, my clippers came back to life. Thanks bro!

@rdeepu7778 5 лет назад

MorningBlubber

@huyload 8 лет назад

Larry I just want to say that you are doing an amazing, amazing job with your channel. The content that your provide is relevant, in depth, practical and also inspirational. Barbers like myself (and I believe many in the industry) gain so much from your work. Your presentations are so well communicated and so easy even for the layman to understand. It really shows how much you prepare for the videos that you make. I'm surprised to see the numbers of views that you are getting. More people should know of Larry The Barber Man! I'm a barber from Malaysia and the guys here back home all know of your stuff. Just wanna appreciate you and thank you for all that you're doing. It made a difference for us! Keep up the good work (:

@Ldall87 7 лет назад

Thank you for this great video. It helped me a lot!

@midcal01 7 лет назад

BEST VIDEO on tuning a Andis Master... my clippers where bogging down even with a new blade and after all the quick fixes on RU-vid... nothing until this video Thank You My Masters are running BEAST MODE!

@gusmac33 5 лет назад

Worked for me! Thank you!!!

@TheCorleone42 5 лет назад

Thank you. I had dropped mine and last time that happened I had to send them out. This time I got them back in order myself.

@erickrosales9644 4 года назад

Larry, I've "tuned up" my andis clippers before.. but never like this. I learned more in your video than ever before. You got yourself a new subscriber. Thx

@1eyeopenikecbs925 2 года назад

Thanks Larry💈 you bring my masters back to life

@marquezporter9735 Год назад

This exact video helped me pit today! So thankful!

@mjoeg075 7 лет назад

thank you Larry The Barber Man.

@MrKaystew 7 лет назад

Hey Larry, do you have any tips on dealing with the heat from the Masters? Thanks!

@tuxedocaveman1830 5 месяцев назад

Perfect explanation... thanks man

@fullmetalnolatheboot2854 7 лет назад

Informative thanks I'm going to give my clippers a tune up.

@kingdfs27 6 лет назад

Thank you soo much! You are the man Larry

@TheyCallMeCoolRon 7 лет назад

Great video. I was just about to send in my masters as they are making the loud vibrations and not cutting. I will do as you suggest in the video and I up to be back up and running soon.

@sneakygreenalien 6 лет назад

Thanks for the heads up on what to do if or when a person drops their Andis Master Clipper. Much appreciated that Video, thx!

@isaacaugustin2483 3 года назад

This man broke it down to ABC!!! Wow 🙏🏽🔥

@corneliushill622 2 года назад

Thank you Larry! My Andis Master's tension screw kept getting loose. You're instructions helped tremendously

@horaceguidry1541 Год назад

Best clipper repair EVER hands down!seriously. Everyone else says to never touch that adjustment 🤨... now my clippers are running great!

@dsharp7441 5 лет назад

Very helpful vids man.... just wondering if you could do a breakdown of the cordless seniors?

@grundyman26 6 лет назад

thats some good intel, im gonna give it a shot tomorrow , thanks !!!

@tootallzz Год назад

Awesome thank you Larry!

@T0mChapmanHairDesign 8 лет назад

Legendary! Nice one brother

@michaelmcgraughsr.6231 5 лет назад

tanx larry i will follow your procedure mike

@trevenwright5465 5 лет назад

Thanks, and hey done a grate job with your hair cut

@akeredun 4 года назад

I started watching because of the accent. I kept watching because of the knowledge. Excellent information and exhibition!!!

@TheBoxingCode 5 лет назад

Thanks for the knowledge fam

@galactus4mac 3 года назад

Incredible thank you so much.

@DoubleD2500 3 года назад

Dope video. Thanks for the help!

@larrythebarberman 3 года назад

DoubleD2500 Your welcome 🙏

@CONTEMN_Topic 2 года назад

great tutorial. I hope I am gonna fix mine which I just received as a brand new instead of OPENED NEVER USED.

@allensmith3082 7 лет назад

Exactly what I needed thanks

@STYLERROOM 4 года назад

Thanks To Larry I was able to fix my andis fade master, really helpful video and channel, appreciate it 👆🏾🤟🏾

@odettegrimes1011 6 лет назад

Thanks Larry. Your video gave me confidence to fix my Andis today myself. I just needed the right size screwdriver. The so called Only repair facility in Malaysia was too hard to deal with.

@anthonyprado3 4 года назад

Thank you this truly saved me money .!

@WayOfTruth665 8 лет назад

I wanted to thank you for your videos. Your videos are simple to follow and your techniques actually work. I'm glad I found your channel. Have you done videos on how to clean the blades; especially how to remove buildup on them? Thanks

@silviagoicochea7414 4 года назад

Thank you! this was very helpful.

@larrythebarberman 4 года назад

silvia goicochea I am glad to hear so !!

@mikeapodaca7494 Год назад

Thank you bro, finally took my masters out of the the cabinet and tuned it. Working strong as day one. Miss the power out the corded version.

@rickyramirez7430 2 года назад

Thanks Larry! It worked! I was about to buy some new clippers cause i thought there were too old.

@bosslife_bangin 6 лет назад

Great explanation...

@Pillo464 6 лет назад

Great and accurate explanation.!Thank you.!!

@larrythebarberman 6 лет назад

YOUR WELCOME!!

@mwest-yn5yx 4 года назад

Super job!!!

@zekechilds1068 2 года назад

Great frickin job man my clippers are great

@mrwillgreen 6 лет назад

My man!!! I needed this video!!

@sophiaavera4516 3 года назад

thank you! I was so lost and knew their had to be a way...

@josephsalazar7643 3 года назад

Thank you Larry I drop my Clippers yesterday they where not running right now they are running great thank u again ....

@larrythebarberman 3 года назад

Your welcome 🙏

@bookerwilliams1898 2 года назад

Thank you so much. I was just getting ready to take my clippers to the repair shop. Now I won't have to.

@AlexanderRodriguez-yt3pe 7 лет назад

know I know why your name is Larry The Barber Man cuz you the man...

@innocentfunfcfootballclub3283 7 лет назад

great one brother

@seanehook 7 лет назад

Great video man! Question: I adjust everything as you say and the clippers seem to be running good but then when I get cutting and adjusting the blade for cutting length, the clippers start to mess up and ultimately the blade stops sliding back and forth at certain points when I adjust the level on side.

@brassiee3267 Год назад

Subscribed. Awesome video🤟🏽🙂

@Sk8brd.J 8 лет назад

hey larry! love the vids! could please do a performance check vid with the andis magnetic guards please? my masters run fine with no guards, but the as soon as i put em on, they can end up rattling unbearably! any help will be appreciated! thanks!

@Tobi_Jones 2 года назад

very helpful video

@alexleon1468 4 года назад

Hey Larry nice video!! Got a question for you tho, what kind of blower is that? Can you post the name or link? Thanks bro

@monzon529 7 лет назад

nice video very helpfull thanks

@pottershand91 8 лет назад

Awsome video very informative my friend

@jesusibarra3608 3 года назад

Good shit brother !!

@MrElrey1981 7 лет назад

Cool video Larry I liked and subbed brother. blessings to you.

@edwardmarquez7452 5 лет назад

great video

@gorillaj131 8 лет назад

im having thr same problem with the t outliners can u do a video on the t outliners as well .i dropped them

@angelawalters1975 4 года назад

Thank you SOOOO MUCH

@jevonclark4839 5 лет назад

Thank you very much.

@larrythebarberman 5 лет назад

Your Welcome!!

@reynault87 7 лет назад

great video!!! now my masters cut like butter & are whisper quiet

@Samuel-dc2mq 7 лет назад

well done sir.

@metrogrid 2 года назад

Larry. You ARE the man !! Just a quick question ... are you moonlighting as an Andis engineer assigned to assist the masses?

@larrythebarberman 2 года назад

Not at all 🤓

@DANNYN224 3 года назад

One of the best videos replaced the blade and the middle cutting blade won't move back and forth it was only moving to the right so I turned the screw and watch the blade go back and forth fixed it now it is quiet before it was loud and only the blade moving to the right