@@bingobango7734 Man , 10 month without one of your great video... its pretty long. PLEASE make dissasembly/assembly of the KWC/CYBERGUN 1911 and same for the UMAREX Colt single action army. that just would be awesome ! (thanks)
Thanks for the video I just got gifted a a3000 . I think the seal is gone as its losing co2 managed to find a replacment on eBay as I dont think they manufacture these now . Is it quite easy to do ? Also can I buy the tool that you used to unscrew the valve .thanks great video fingers crossed ill get it up and running 😁
Hello sorry for the late reply I have been out of action for some time. It is quite straightforward as the parts just have to be unscrewed. The o rings and seals a chap on ebay was selling. Make sure the o ring is suitable for co2. I will be doing a video when back at it as mine has started to leak . you can buy tools for the job or even use a large flat head screwdriver but be careful not to damage the co2 piecing pin or any threads. Good luck with your repair buddy 👍
Hello sorry for the late reply I have been out of action for some time. It could be a number of issues firstly does it sound like anything is leaking it may just need a few drops of oil on the seals or even replacing them. Does the valve piercing pin have any damage does the opening look restricted? And inside the valve is a mesh washer this may be clogged and need a clean. I would strip the valve and clean everything while checking for damage it would be an idea to purchase the valve seals in advance so you can swap out if needed. Let us know what you find good luck with it all.
@@bingobango7734 Hi thanks for the reply, no leaks, I left the co2 in for a week and no loss. I will do as suggested and take the valve apart it’s probably clogged up.
@GSwton ok so no leaks which is good I wouldn't leave the co2 bulbs in when not using the pistol as this can damage the seals. Go careful trying to remove the mesh washer sometimes it will just drop out freely and other times it needs to be shaken out. Good luck I hope you can get it running again let us know what you find.
Hello sorry for the late reply I have been out of action for some time. I would like to help but really only make these videos to try and help people repair themselves. I really wouldn't feel comfortable tinkering with something that wasn't mine sorry buddy but maybe we could figure out how to get your one repaired.
@@bingobango7734 i got it broken tbh it was jammed I’m not a expert like you wouldn’t know where to start I will give it another look maybe try and dissemble it
@lionmoet5841 Ahh OK double check the top slide isn't bent like mine was its a very thin alloy and possible to dent inwards by just squeezing on hard when pulling back another possible reason could be a jammed sear or loose bb