Anthem ARC Genesis Setup Guide on my AVM 70 8k | Get better bass!

Подписаться 7 тыс.

Просмотров 8 тыс.

50% 1

I go over how to setup an Anthem processor (AVM 70 8k) or receiver with ARC Genesis software (sovrn.co/w5si050). Now that I have a full separates setup and I can give my full opinion on whether it's worth the cost/trouble. With this processor, I have almost enough channels of processing to implement my 17 channel home theater in my new theater build.
This is definitely one the best values in home theater processors on the market right now that process 15 channels or 9.2.6 home theater setups. If you're looking for a new processor for your home theater, this should be at the top of your list. This gives you very good performance and is relatively attainable for many enthusiasts.
Download ARC Genesis: anthemarc.com/arc-genesis/ind...
RUIPRO HDMI Cables
amzn.to/3JbzOzo (Certified 50 feet/15 meter fiber optic) Used in video
amzn.to/3SOp7pr (10 feet/ 3 meter fiber optic)
amzn.to/3SSI3ng (16.5 feet/ 5 meter copper)
AC Infinity Fans
amzn.to/3T7tMSK
KabelDirekt - 6ft RCA/phono cable
amzn.to/3R5nDFt
Speaker Cables:
amzn.to/383ArHU
Subwoofer Cable:
amzn.to/3BbarXH
Center Speaker Wall Mount:
amzn.to/2XRPsdZ
Speaker Brackets:
amzn.to/3892RQA
/ upscaled_
Equipment list:
Speakers (Some models shown are updated equivalents)
1. Definitive Technology BP-8080ST Front/Main
amzn.to/3i2NG4g (Definitive Technology BP9080x)
2. Definitive Technology CS9080 (Replaced the CS8040HD) Center
amzn.to/3C9io2g (Definitive Technology CS-9060)
3. Definitive Technology SR-8080BP Surrounds
amzn.to/3WDUaWo (Definitive Technology SR9080)
4. Definitive Technology StudioMonitor 55 Height Front
amzn.to/3PYcfvD (Definitive Technology Demand Series D11)
5. Definitive Technology ProMonitor 1000 Rear Surrounds
amzn.to/3vpMB9v
6. Infinity CS60R In-ceiling height
7. SVS PB-3000 Subwoofers
amzn.to/3WNHqMm
Processor
Anthem AVM 70 8K
sovrn.co/w5si050 (Crutchfield)
Amplifiers
Emotiva XPA Gen3 7 Channel
Emotiva XPA Gen3 10 Channel
Screen
Elite Screens ER120WH1
amzn.to/3mwL4LT
Projector
Epson 5050UB
amzn.to/3Q2X1p7
Epson 4010
amzn.to/3YU82x3
Acoustic Panels
Acoustimac.com
Seats
Palliser Blade
Theater Seat Risers
SoundRight 7" Black Home Theater Riser Platform (4Seating Website)
bit.ly/3DwPSXr
AC Infinity Fans
amzn.to/3T7tMSK
AC Infinity Controller 1, Thermal Trigger (For Xbox Series Consoles)
amzn.to/3VtsmUm
Chapters:
00:00 Intro
1:46 Arc Genesis Software initial config
5:15 Measurements position 1
8:55 Measurements position 2
9:25 Measurements position 3
9:54 Measurements position 4-5
11:27 Tweaking
12:52 Deep bass boost
15:55 Uploading setting to processor

Наука

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@damicodrums Год назад

Great info, please do more on adjusting target curves. Thank you.

@Upscaled_Reviews Год назад

I hope to do more when I set it up with the full setup in the new theater.

@lucarizzi1411 9 месяцев назад

Hi, I'm configuring my AVM 70 via my Macbook, only that when I connect it to the device, the speaker settings screen doesn't come up, and it detects a configuration problem. How can I do..?

@user-mp5xk46zq1j-io5- Год назад

Interesting to see how the processor works. But be careful, you have a well insulated room. This is quite rare, especially if you live in town ! For example I am in a building of 1898, the microphone will hear the neighbors... But I'll move to a new concrete building in the next weeks 😉

@ericvaughan11 Год назад

You’re first supposed to manually set the distance from your left speaker. And you’ll also get better results if you go in launch quick measure first and check the decibel ratings of your L speaker, then check db of subwoofer next and set your subwoofer so it is 3 db higher than the L speaker. Then go back and launch arc and run it and you won’t get that error message for your subwoofer and you’ll get excellent results.

@Upscaled_Reviews Год назад

Excellent tip!!

@ReanimatedShad0w Год назад

I thought arc sets the distance after the calibration ?

@ericvaughan11 Год назад

@@ReanimatedShad0w No, you set that first so ARC can use that as reference when setting the distances for all the others. So you need to watch more video's on how ARC works, it doesn't set distances like other software does like Audssey do. But it works very good.

@Upscaled_Reviews Год назад

@@ericvaughan11 Looks like I have to re-do the whole thing although it's probably only off by about a 12 inches.

@ericvaughan11 Год назад

@@Upscaled_Reviews Please remember that ARC doesn't set distances like the other room corrections typically do. Just set he distance for Left speaker before running the ARC measurements, then let it set distances for everything automatically after that.

@christiano3254 Год назад

Hello, I own an anthem avm 70 and have the problem that I always have +6db roomgain when calibrating. At first I thought it was because of the room / I moved and have +6dB roomgain again and can't explain this to myself - I use an Anthem AVM 70 and an Anthem MCA 525 power amplifier with arendal 1723 speakers - can it be that the microphone is defective? Do I have to set anything in Windows? I'm pretty perplexed why this is so - can't explain it to me Christian

@kibyras 8 месяцев назад

What sub do you use, you probably have some obstructions

@danmaier2077 Год назад

Hello, how are the front speakers set? On full range? And the center speaker? Small or full range? Thank you, greetings from Austria 🇦🇹 Europe

@Upscaled_Reviews Год назад

My fronts re set to full range because they have built in 12 inch powered subwoofers. Most speakers would be crossed over though. The center is full as well.

@danmaier2077 Год назад

@@Upscaled_Reviews OK, thank you so much 😊

@dumisanigoba7709 Год назад

looking at your rack some thing caught me off guard, you have a zappiti and a zidoo. In the home theater space most people prefer one brand over the other.

@Upscaled_Reviews Год назад

I actually sold the Zappitti and only have the Zidoo now.