From my experience HiveOS runs smoother and more efficiently towards the chips because you can tweak all of them individually hence the lower temps and reduced electricity bill.
@Kan Lam not really.. you can use any sd card any size you want. just have to partition the sd card recognizable for Fat32... i used my 64gb sd partitioned down to 30gb so Fat32 would recognize it.. worked fine on all my miners 👍
@@NordDron0 Due to the max size limit of FAT32 (32GB), the Windows disk management tool, the DiskPart format command, and many third-party SD card FAT23 format tools will format cards below 32GB as FAT32, and cards that are above 32GB as exFAT or NTFS. requires fat32 or it wont read
You are looking at the wrong values.i have my ltc+ running for 4 years at 560mh/s you should look at asic status that 0 stays 0 and not x when you overclock,and sure stay away from hiveos that thing is for ppl that dont know how to use linux and properly set gpu miing rigs.Asics dont have fails,and if they do they auto reboot they dont just stay idle.
Use the SD card method to reinstall a fresh firmware. Follow the link for blissz, the link is in the description. there is the step by step on how to create the sd card