I got mine just a few days ago and I like it so far print quality is good. My only complaint is the flinging poop lol highly recommend printing the poop catcher. Not a big fan of the slicer either a poorly forked version of PrusaSlicer. It also wastes a lot more filament for multicolor prints than necessary. assembly was definitely a breeze I have assembled a lot of 3d printers, and this was the easiest. But overall I think its a great printer and I am happy with it.
@@Creepy_tales75 the poop catches print is a must! And if I can make a recommendation, use the anycubic beta slicer. It’s based off of orca slicer and is sooooo much better. But I agree with you, one of the easiest printers I’ve set up!
Hi, thanks for the video, how long is the 6 pin cable from the ACE unit to the printer? I will like to set it up over the printer, do you think is long enough
@@simoneala3 it’s only about 3-4 ft long. Anycubic only recommends you set it up on the left side of the printer. Not sure if you’ll be able to set it up on top 😞
Bonjour, Plein de petites questions, le benchy, c'est celui proposé par la marque dans la clé usb ? Si c'est le cas, c'est pas une réussite de leur part ! 12mn seulement pour une telle pièce, il aurait mieu valu la faire en 15 et qu'elle soit parfaite ! Sinon, on n'a rien vu de la partie logicielle, tu as utilisé quoi pour piloter la machine ? Cura ? (beurk) Prusa slicer ? Orca slicer ? Et tu ne donnes pas vraiment de caractéristiques techniques. Je cherchais à savoir quelle est la température max du plateau, mais même chez eux, il n'y a rien d'indiqué !! Sinon merci pour ta vidéo.
Hey there! Thanks for you questions and I’m happy to answer them. They do provide the speed benchy on the usb and yes it’s not perfect. However they do provide a second benchy printer with normal settings that prints in about 16 mins which does turn out perfect! I used both Anycubics slicer as well as the beta Anycubic software which is based off of orca slicer. The user interface of the Anycubic slicer is awesome! However the beta version based off of orca slicer gives you so much more control!
Translated to French: Salut! Merci pour vos questions et je suis heureux d’y répondre. Ils fournissent la vitesse sur l’USB et oui, ce n’est pas parfait. Cependant, ils fournissent une deuxième imprimante de banc avec des paramètres normaux qui imprime en 16 minutes environ, ce qui s'avère parfait ! J'ai utilisé à la fois le slicer Anycubics ainsi que le logiciel bêta Anycubic qui est basé sur le slicer orca. L'interface utilisateur du slicer Anycubic est géniale ! Cependant, la version bêta basée sur Orca Slicer vous donne bien plus de contrôle !
@@cgold1981 I’ve used plenty of 3d printer spools and I’ve had no issues, I’ve even used those tiny 250g spools and was able to print that Spider-Man piece. And yes it does come with a usb drive with some models pre loaded on it already!
@@ElectroMac74 if you use the regular Anycubic slicer, no. But if you use orca slicer, I believe you can set it up to print useful objects instead of printing the purge tower!
@@steveng724 considering this one has the multicolor printing as well as the filament dryer in an all in one package, I think the Anycubic would be your best bet
Hey that was just an example of a benchy printed on the hype speed. A regular benchy turns out perfectly! And I printed the speed benchy once more on a more stable desk, and the print quality has turned out almost perfect! And that’s great that you’ve been able to print multi color prints with one nozzle!
Месяц назад
Essa também faz ruido no eixo Y tal como a Kobra 2?