ANZO HEADLIGHT INSTALL ON 2015-2017 F-150: STEP BY STEP INSTRUCTIONS.

Подписаться 12 тыс.

Просмотров 28 тыс.

50% 1

In this video I show a step by step install of my new "Anzo Switchback" (Anzo Headlights - amzn.to/3tS2dQ6) headlights for my F-150. These will fit all 2015-2017 F-150's.
These lights give your truck a super aggressive look while improving the light output from the factory headlights.
These lights also have a "switchback" function allowing the LED strip to change from white to amber when using the turn signals.
LINK TO PURCHASE BELOW
PLEASE SUBSCRIBE AND CHECK OUT MY OTHER VIDEOS!
ANZO HEADLIGHTS - amzn.to/3tS2dQ6
🔥UPGRADED LED BULBS - amzn.to/48uTOr2
TRIM REMOVAL TOOLS - amzn.to/3omzh1B
FULL MODS LIST BELOW⬇
*CLICK LINKS TO PURCHASE BELOW*
RAYDONAIR ANTENNA (7 inch) - amzn.to/3mpQ3M4
RAPTOR GRILLE - amzn.to/3GLQufe
2009-14 RAPTOR GRILLE - amzn.to/3Ot4jkA
RAPTOR GRILLE LETTER'S - amzn.to/33Ncrqg
APPLE CARPLAY MODULE - amzn.to/2WxFTgA
TYGER BEDCOVER/TONNEAU COVER - amzn.to/2NkUoQ6
TAILGATE ASSIST - amzn.to/3hXjFhm
AMERICAN FLAG VINYL - amzn.to/2Z07TtO
PRY TOOL - amzn.to/37T46CI
WIRE TAP'S - amzn.to/2A31QfK
PLASTI-DIP - amzn.to/3hTkdER
TACTICAL TRASH CAN - amzn.to/2Z9hSNI
Website- www.autoheadz.com/
Instagram- / autoheadzf150
Twitter- Autoheadzf150
Business Inquiries - autoheadzf150@gmail.com
As an amazon associate I earn a small commission for purchases made from displayed links.
Song Credits
Song: You and I [NCS Release
Music provided by NoCopyrightSounds
Song: JPB Top Floor [NCS Release]
Music provided by NoCopyrightSounds
Song: Zookeepers & ShipWrek [NCS Release]
Music provided by NoCopyrightSounds
#anzousa #anzoswitchback
#f150build #f150mods
#bestf150mods #howtovideo

Авто/Мото

Опубликовано:

16 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@flaviorocha5290 10 месяцев назад

Still helping people 2 year later haha. I just got mine in today just to find out all the LEDs I bought for the housings don’t fit.. Thanks for tagging the bulbs you installed, saved me a headache and research.

@AutoHeadz 10 месяцев назад

Haha! My pleasure. BTW I still have the headlights on the truck and they look and work like the day I installed them so ENJOY! They are great!

@jonp761 2 года назад

Thanks for posting this. I just did the install on my 2017 this past weekend. I found the part about splicing into the turn signal wiring very helpful and easy to remember.

@AutoHeadz 2 года назад

Thank you so much for saying this. I’m glad you found it helpful and thank you for the positive feedback.

@eugenedw 2 года назад

Thanks for the video. Very well done and easy to follow (even at 1.5 speed). With this one and the Raptor Grill Install video, my 2015 F150 is complete, for now. Looks great! Next, 1” lift kit, new set of Venom Power Terra X/Ts, and a Borla exhaust system to button things up.

@AlexHernandez-bx5eh 7 месяцев назад

The best informative video on insulation I’ve ever seen great patients great direction thank you. I feel more confident installing my lights.

@AutoHeadz 7 месяцев назад

🙏🏻

@AutoHeadz 2 года назад

🚨LINK TO ANZO HEADLIGHTS amzn.to/3ASZZ7d 🚨LOW BEAM UPGRADE - amzn.to/48uTOr2 🚨LED TURN SIGNALS - amzn.to/3MMT99T UPDATE : I have had these lights now for almost 2 years with ZERO issues. The LEDS I put in also have had ZERO issues. Absolutely love the upgrade.

@josemaniaa4873 3 года назад

This installation video is top notch . Best one I’ve seen by far

@AutoHeadz 3 года назад

Thank you so much for saying that. If you have someone that would also use it please share. Happy 4th!! 🇺🇸

@TheMedicmudder 2 года назад

Fantastic video love how you broke everything down, one step missed sometimes and messes the whole thing up,but You were a lot of help in this install thanks!!!

@AutoHeadz 2 года назад

Thanks for taking the time to say this. It really does mean a lot to hear this. I’ll try to keep the step by step installs and reviews coming!

@AndrewNobleOfficial 3 года назад

looks so good dude! so glad the whole bumper doesn't have to come off.

@AutoHeadz 3 года назад

Thank you! I’m in love with them. Yeah man, easy install really.

@thecosplaynoobj3872 8 месяцев назад

Just used your video today to put my gen 2’s in. Thank you for the vids you do.

@AutoHeadz 8 месяцев назад

I appreciate that man. Gen 2 Anzos?

@AutoHeadz 8 месяцев назад

How do you like them?

@thecosplaynoobj3872 8 месяцев назад

Yes sir. The Gen2 Anzos. I absolutely love them!! I did ask another question here about the plank light bar and when are the times it actually glows white. In DR is it just the projector bulb that glows or are the planks supposed to glow? Thanks for responding. Much appreciated

@robdee2014 4 дня назад

This was perfect Thank you for the help on the install

@AutoHeadz 4 дня назад

My pleasure Sir.

@johnboyte 2 года назад

Thanks for the video, I can't wait to use it for my install! I have a quick question... Can I use those LED lights you reference (NINEO) for both the high beams and low beams? Thanks Again!!

@TOZWS6 2 года назад

Awesome detailed and gentle installation video. Wish it was a 2018 👍

@AutoHeadz 2 года назад

Thank you for saying that. Love hearing positive feedback like this. Have a great weekend.

@TOZWS6 2 года назад

@@AutoHeadz your welcome brother, you do the same.

@masonmiller9658 Год назад

Great help! Thanks!

@AutoHeadz Год назад

Thank you! Thanks for checking out my video. Make sure you subscribe I got some big stuff coming out this month I know you will like. Have a good weekend man.

@cjitty Год назад

Best one yet great job

@AutoHeadz Год назад

Made my night.

@kirbyjames2032 Год назад

Amazing video thank you

@AutoHeadz Год назад

Dude!!! Thank you for saying that!

@user-kv3ov2pu2i 7 месяцев назад

Don’t know if you’ll respond to this but I got these last week and got them put in to find out they don’t work because of the main headlight plug doesn’t clip on or doesn’t have a clip slot for it to fit securely enough to maintain connection do you got any ideas to fix that? I’m afraid they wont take it back through the warranty.

@MrRoadMonster 2 года назад

I love the look and am interested in getting some. Did you upgrade the headlights to an LED or HID bulb when displaying them at the end of the video, or are those the stock halogens that came with the assembly?

@AutoHeadz 2 года назад

I upgraded to these amzn.to/3B9BENy

@rave6094 7 месяцев назад

This just saved my ass thanks bro

@AutoHeadz 7 месяцев назад

😂 Enjoy the upgrade. More content coming very soon. Don’t forget to sub. 🤙🏻

@vortexxrc6405 Год назад

fricking amazing video

@AutoHeadz Год назад

Thank you for saying that!

@samuelzukauskas8233 3 года назад

Headlights look sick! Ps5 giveaway!!!!

@AutoHeadz 3 года назад

Thanks! You wish!!!

@mcesarey 7 месяцев назад

I'm following along step-by-step with your video and it seems the 9/32 bolts are actually 7mm...so far great job

@AutoHeadz 7 месяцев назад

Haha! Awesome man. More of a metric guy myself too. Thank you for saying that. Happy new year!

@mcesarey 6 месяцев назад

Also wanted to say that those wires from the headlights were pre-stripped much like an old school aftermarket head unit. I clipped that part off of the wires and the clamps worked much better. Install turned out perfect, thanks for the video @@AutoHeadz

@TFBJFord 3 года назад

The anzos look good!! I have the alpharex headlights on mine. I was going to go with anzo though. Good video man! Are you still running factory taillights as well?

@AutoHeadz 3 года назад

Thank you! The Alpharex are very nice too. I still have the factory taillights. That’s next 🤙🏻

@ashtonchilcote5093 8 месяцев назад

Great video! The link for the upgraded bulbs is broken. Could you update? Also wondering if you can replace the bulbs without removing the whole headlight assembly? I'm ready to install the lights but don't have the bulbs so wondering if I should wait and replace the bulbs before install.

@AutoHeadz 6 месяцев назад

Hey man thanks for letting me know. Link should be all set now.

@limitlessautomedia9794 2 года назад

Will aftermarket led bulbs fit the caps on these headlights. I have aftermarket led bulbs from American muscle

@AutoHeadz 2 года назад

Only specific ones will fit. These are the ones I used. amzn.to/3MQW9Cf

@pgoularte Год назад

I purchased the Anzo's with both suggested LED's for lows and turn signal. Installed and passenger side worked great, but install on the driver side left me with a dead high and low beam. :( Switchback turn signal and parking light work fine in the passenger housing, just nothing on the high or low beams. Put the halogen back into the low just to see if it was the replacement led causing an issue and still nothing. Is there some obvious thing I can check before assuming it's a defective Anzo housing? Thanks!

@AutoHeadz Год назад

Hey man. Shoot me an email real quick. AutoHeadzf150@gmail.com I think I know what your problem is.

@thecosplaynoobj3872 8 месяцев назад

I have a question. When your driving during the day are the projectors for the daytime running lights all that are on or is the plank light bar supposed to glow white as well? Thank you for any feed back

@AutoHeadz 6 месяцев назад

During the day all you see is the big projector led. I switched mine to the nineo. Looks menacing driving during the day.

@shieldoftrust 2 года назад

Does the planks stay on as daylight running lights?

@AutoHeadz 2 года назад

No the planks only come on at night or you can just turn the lights on. The low beam turns on as the DRL. Looks pretty sweet with the LED Sphere.

@AspectAlex Год назад

Question, I bought these a few months ago. However I want to put LEDS in the turn signal spots and I can. But for some reason on the Anzo insert where the turn signal socket goes in is a different size as the factory one. So without hard wiring in resistor’s how and or where can I get the right sized sockets that will fit in the Anzos insert? It’s really annoying. I also bought the resistors where you just put the LED bulb in and plug it in to the OEM connector. Can you please help me?

@AutoHeadz Год назад

I got you man. Shoot me an email and I’ll explain.

@AspectAlex Год назад

@@AutoHeadz Awesome. Thanks man!

@DanielGonzalez-bv2fv 7 месяцев назад

Hey man what’s the difference in anzo or amerilite

@AutoHeadz 7 месяцев назад

I’m not familiar with Amerilite sorry.

@jwalkerftw 2 года назад

What is the splicing for man? For the switchback function?

@AutoHeadz 2 года назад

Yes, exactly.

@jwalkerftw 2 года назад

So if you don’t splice the turn signal won’t work? Can you still use the lights turn signal without having to splice?

@AutoHeadz 2 года назад

I’m actually not sure. No one has ever asked me that. I’m assuming it would still work it would just flash white and not yellow but I’m not 100% sure.

@Flores97Drummin 6 месяцев назад

I installed my anzos a few years ago now. Having issues with one of my low beams not working and a high beam. I’m going to give the bulbs you are running a try. Are the his and lows both H7?

@AutoHeadz 6 месяцев назад

Stand by. I’ll send you the new link. Old one is wrong

@AutoHeadz 6 месяцев назад

Here it is amzn.to/48uTOr2. They are both H7

@Flores97Drummin 6 месяцев назад

@@AutoHeadz thanks man. Gonna have to order these and see how they work. Are you still running them both in hi and lows currently? I have the brand crystalux HIDs for lows and LEDs for my his. They’ve only lasted me I want to say almost 3 years so hope these will fix them.

@AutoHeadz 6 месяцев назад

@Flores97Drummin yes these are the same ones I’ve had for 3 ish years. Still great no issues.

@Flores97Drummin 6 месяцев назад

@@AutoHeadz glad to hear! Thanks again.

@andrewbelleza4417 7 месяцев назад

Thank you for this! Can you share an updated link for the LED bulbs? The link is dead.. 😅

@AutoHeadz 7 месяцев назад

Oh sorry about that. Here is the updated link - amzn.to/3O7UGtx Still running these 3 years later no issue.

@andrewbelleza4417 7 месяцев назад

Thank you so much!

@AutoHeadz 7 месяцев назад

@andrewbelleza4417 Thanks for letting me know the link was dead. Happy modding and happy new year! 🎊🎈🎆

@F150EcoBeast 3 года назад

Really like them anzos. You should get some switchbacks to match with the drl strip 🤙🏼

@AutoHeadz 3 года назад

Lol…funny you say that…I already do lol. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qBdcrea2GqI.html

@F150EcoBeast 3 года назад

@@AutoHeadz meant for the turn signals, my bad 🤦‍♂️

@jimbenning3717 2 года назад

Hey bro I know I’m commenting on this a year later. But I’m super pumped I jus ordered my anzo headlights and I’m pretty confused on what to do because I thought the lights that come with the anzo will be perfect. I don’t have any extra money to spend on the bulbs because of a tight budget. So I was wondering is the factory lights really that bad?

@AutoHeadz 2 года назад

No they aren’t that bad. If you ever want to save up and upgrade in the future you can do that too. The low beam I installed are definitely a huge upgrade. They are 40 bucks so it’s up to you. Check em out - amzn.to/3B9BENy

@AutoHeadz 2 года назад

Honestly I think you should do the upgrade while you have easy access to the lights. They aren’t two expensive and I think they are worth the upgrade.

@jimbenning3717 2 года назад

@@AutoHeadz hey I ended up buying the led for the low beams but now I’m have a problem with the metal clip that holds the bulb in place. Unfortunately when trying to take out the original bulb I bent the wire clip quite a bit . Due to that once I put my new led in and tried clipping the metal piece back it wouldn’t clip properly but I tried my best and kind have assed the clip onto the bulb. Is that fine? Or should I make sure to redo it and make the clip properly stick on.

@jimbenning3717 2 года назад

Half assed*^

@AutoHeadz 2 года назад

@@jimbenning3717 So those retainer clips typically do a good job at holding the light in. As long as you were able to get the wire clip up and over the light you should be ok. If it is so bent that you think the wire is not able to hold it in place maybe ensure that it is locked in. Hope that helps. I’m glad you went with the upgraded bulb. Which one did you get?

@joelane4670 Год назад

Did you ever add LEDs low beams? And did you have any trouble installing them. Great step by step video..Thank you!

@AutoHeadz Год назад

Yes I did. I swapped out the low beams and the turn signals for upgraded LEDS. I appreciate you saying that. I put the bulbs I used in the video description. Thanks again.

@joelane4670 Год назад

@@AutoHeadz I appreciate you responding so quickly..Amazon has those lights on sale for now,would love to grab a pair! And when most us are going to take a DIY on we need every bit of help we can get..some videos will skip forward through so sections assuming we should just know that little part,you really do the entire install start to finish. So thanks again..peace!

@joelane4670 Год назад

@@AutoHeadz sorry for so many questions. But the replacement led bulbs you instilled in the anzos. Did you have any issues with size and error codes? Just wanna order everything at once. Thanks!

@AutoHeadz Год назад

The link for the upgraded LOWBEAMS and TURN SIGNALS BELOW👇🏻 Lowbeams - amzn.to/40ZNGUd Turn signals - amzn.to/3S3LOWi

@AutoHeadz Год назад

@joe lane Thank you for all the kind words. I love when I hear positive feedback. I put the link to all these in the first comment of this video. Everything works absolutely flawlessly. No issues across the board almost 2 years.