No video :(

AR637T Receiver Setup via Forward Programming - Horizon Insider Tech Talk

Подписаться 155 тыс.

Просмотров 110 тыс.

50% 1

Please click "Show More" for links and more information.
AR637T Receiver Setup via Forward Programming - Horizon Insider Tech Talk
You asked for a receiver that was simple to program.
You asked for AS3X that was easier to set up.
You asked for universal SAFE Select!
The Spektrum Product Developers listened and responded by introducing the newest generation of aircraft receiver! Gone are the days of downloading files from the internet to mimic the AS3X settings you want... or struggling your way through a cellphone based app. Spektrum Forward programming is here, and it's a game changer!
In this edition of Horizon Insider, Kyle walks you through the complete setup of an AR637T receiver using the new Spektrum NX6 transmitter. He shows how a basic PNP (Plug-N-Play) FMS CJ-6 V2 airplane can be fitted with the latest/greatest in industry-leading technology in the form of Spektrum Smart Technology, Forward Programming, and intuitive engineering.
In this video, we have three primary programming goals:
1. Basic Airplane Setup
2. AS3X Stabilization
3. SAFE Select
Note that this process remains the same for any Spektrum Gen 2 or newer transmitter AND is applicable on many other "Smart" receivers from 2020 and beyond. You may need to update your transmitter and/or receiver to access the full catalog of features shown in this video. For more information on this process, see the links listed below.
- Receiver Shown - Spektrum AR637T DSMX 6-Channel AS3X Telemetry Receiver: www.horizonhob...
- Transmitter Shown - Spektrum NX6 6-Channel Transmitter: www.horizonhob...
- Aircraft Shown - FMS CJ6 V2 1200mm PNP: www.horizonhob...
Relevant Video Content Links:
- Spektrum "How To Update" Playlist: • How to Update
- Spektrum AR637T Setup Series: • AS3X Setup Series - Fo...
- How to UNLOCK your Spektrum AR637TA: • How to UNLOCK your Spe...
Follow us on Facebook, Instagram, and Twitter for more content!
/ horizonhobby
/ horizon_hobby
/ horizon_hobby

Опубликовано:

2 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 159

@horizonhobby 3 года назад

Note that this process remains the same for any Spektrum Gen 2 or newer transmitter AND is applicable on many other "Smart" receivers from 2020 and beyond. You may need to update your transmitter and/or receiver to access the full catalog of features shown in this video. For more information on this process, see the links listed below. - Receiver Shown - Spektrum AR637T DSMX 6-Channel AS3X Telemetry Receiver: horizonhobby.cc/3isUUck - Transmitter Shown - Spektrum NX6 6-Channel Transmitter: horizonhobby.cc/SPMR6775 - Aircraft Shown - FMS CJ6 V2 1200mm PNP: horizonhobby.cc/FMS133P Relevant Video Content Links: - Spektrum "How To Update" Playlist: ru-vid.com/group/PL3xicOtuJ602e0Iq4bwq3iVOHcEno43Wy - Spektrum AR637T Setup Series: ru-vid.com/group/PL3xicOtuJ600AEzUjw7Q03tC4aRD-8T-2 - How to UNLOCK your Spektrum AR637TA: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-F3isbv1U8eM.html

@geraldbuckley5925 3 года назад

As an older pilot (78), I can verify that SAFE is very helpful with takeoffs and landings. I have totaled MANY planes, but none with SAFE activated. My SAFE planes include a carbon z Cessna, z Cub, and a FT Storch, and two planes I have, but not yet flown, an FT Edge 540 (just completed), and a Hangar 9 Ultra Stick. If you are crash prone, swallow your pride (or arrogance) and get flight stabilization in the planes you really don’t want to lose.

@rafaeltorres2886 Год назад

All your planes are BNF right ?

@Navigator777777 Год назад

@FBI grooms Kids I agree 100% with your namesake. Satan is on the move in America.

@Truthstillmatters2 3 года назад

This is the first video on Forward Programming that has been succinct and practical. Thanks!!

@horizonhobby 3 года назад

Glad to hear it! You are welcome :)

@kevincarter7102 3 года назад

True story my friend... glad finally found the right guy and video.

@rafaeltorres2886 Год назад

Not really he started to take short cuts instead of explaining throughly what he passed over.

@marathon7man 8 месяцев назад

You’re correct, you are one of the only videos on RU-vid who show binding the CC2 to an NX transmitter. I’ve been using the DXS this whole time but purchased the NX8 and struggled sorting everything out. Your video has worked flawlessly for me, so much that I completely deleted what I had already built on the transmitter and made a new plane profile following your guide. Thanks so much!

@txkflier 2 года назад

One thing “he might have missed” is setting the AS3X gains to “Fixed”instead of the default of “Adjustable”. When he skipped setting the gain channel because the NX6 doesn’t have a knob, the AS3X gains are all going to be zero. If you don’t assign a gain channel and an input for it, you must set the gains to “Fixed”. However, the menu option for that doesn’t show up until you set up a flight modes channel. For some reason, Spektrum doesn’t have you do that until you do the first time setup for SAFE. After SAFE is set up, you can go back to the AS3X settings screen and the option to change the AS3X gains from “Adjustable” to “Fixed” will magically appear. I don’t like how the menus change as you go through the setup process. It forces you to keep cycling through them to make sure you haven’t missed anything. They could have had it automatically set the gains to “Fixed” if you didn’t set up a gain channel and they should have had you set up the flight modes channel long before the first time SAFE setup. Also, even though a 6 channel transmitter doesn’t have a knob, you could put the gain channel on a 3-position switch which would give you three gain settings - 0%, 1/2 of the gain settings, or the full amount of the gain settings. Not great, but better than nothing.

@aquaticthumb5193 Год назад

This helped a lot. This is why I watched the video, and it wasn't addressed.

@JS-jr1wu Год назад

Thanks for response here and also detailed response on Fat Guy Flies channel. The manual does not stress the importance of setting the gains to fixed. I couldn't get the AS3X working properly unless I activated the heading feature and then it would worked for some reason. No that I set the gains to fixed, the heading feature does not have to be activated for AS3X to work properly. Thank you!

@av8tore71 3 года назад

I'm new to RC planes (thanks COVID-19) and have bought receivers to program myself and had absolutely no way of understanding how. This video is awesome and my scratch foamies are flying awesome like they are on rails. Thanks Horizon, you saved me yet again on my scratch builds

@rafaeltorres2886 Год назад

He skipped over a lot your not going to have total success until understand what he skipped over trust me he didn't explain many things if your going to put this reciever in other brands or scratch build planes.

@marathon7man 8 месяцев назад

You are very correct, you are the only video on RU-vid who properly shows binding the NX8 to the Carbon Cub S2. The others, albeit helpful, did not cover as much info as yours has. I’ve been using the DXS this whole time but purchased the NX8 this week and your video has really helped me to properly set up the Tx. Thank you!

@natal777 3 года назад

Thank you for not using the IX radio like most do

@Wilhuff_T 2 года назад

Got the FMS 3M, NX6 and ar637t. Now i understand thanks to this video . It glides very well and the SAFE option is just for emergency occasions (very regulary). Thanks man.

@caddguy6 3 года назад

Just followed this video to setup a AR630 with my NX10, made the whole process quite easy. Thanks a bunch.

@victorrcjets7660 3 года назад

I've had absolutely zero issues with the forward programming. I really did like the adjustable gain it is perfect for fine tuning your plane...

@octane2099 3 года назад

I got everything going good I set the as3x and safe I throttle up but as3x doesn’t turn on safe does when I flip the switch any idea

@rafaeltorres2886 Год назад

Why don't you make a video on installing and programming an AS3X reciever into a non Horizon plane and explain throughly forward programming at a level that us novices could understand in stead of this guy passing over important information that could explain more clearly the process and functionality of this transmitter . I'm not trying to be rude but let's face it I would spend 90.00 for 10 of my planes nearly 1000.00 in sales if I could as well as I'm sure others understand the set up of this HH technology. It would be great if you can do it please.

@rafaeltorres2886 Год назад

@@octane2099 Did you ever figure this out?

@octane2099 Год назад

@@rafaeltorres2886 Do the procedure 2 times and it works.

@WPaul1 2 года назад

Very helpful video covering the setup. I really liked the 'turn it upside down' trick to distinguish between as3x and safe mode.

@SokoAircraft 2 года назад

My favourite channel so far. Love how the information is presented and easy to understand. Very thankful for the AS3X/SAFE Select technology and happy with Spektrum products. Thank you Horizon Hobby!

@jimmydoolitle3764 Год назад

I'm using a "DX6" to do the forward programming and my wing type is two alieron servos and one Y harnessed flap servo, no retracts. So my Rx port assignments displays 1 through 6 just like yours. HOWEVER, despite my having selected a flight mode switch same as you did, my channel input config page DOES NOT have an entry for "7 aux2: B" I have no 7th entry, so I can't assign and independent flight mode switch for safe select. Is this because I'm using a DX6 instead of an NX6 that you are using??? what's going on here? if anyone knows, please help. Thanks.

@justinmakesrepairs4535 Месяц назад

Great video help, I’m excited to try this on one of my airplanes

@FatGuyFliesRC 3 года назад

This was a huge help since I ordered a ar630 for my Viper.

@horizonhobby 3 года назад

Glad to hear it!

@cgdurant1 3 года назад

I have set up as3x and safe on switch b (a 3 position switch) on nx6 transmitter and ar637t receiver. Flight modes are no as3x, as3x on, safe. All travel, gains, dual rates, rates and expo are exactly the same for all flight modes. In off and as3x modes travel and throws work exactly as expected. However, if I turn on safe (with self level), throws and travel are greatly reduced. So much so that I am concerned elevator throw is so little, there is not enough command to control aircraft. Can someone help me understand why travel is reduced like this?

@t-gill9771 3 года назад

Thank you thank you thank you this video finally explain exactly what I needed to know in forward programming finally got my plane to fly after two failed Maidens this is the program for me I’m saving it and thank you Verizon I don’t know this fellows name but he did a awesome job explaining exactly what you need to do and know to program your plane right Please give this man a raise he deserves every bit of it I almost gave up butt he is the man 👨 now I am going to reprogram all my planes right thank you thank you thank you so much this is the video fellas if you want to program your plane this is it🤜❤️✌️👍😁

@cgdurant1 3 года назад

Great video and it also a key item needs to be said. If using a transmitter (such as an nx6 seen here) with no adjustable gain. Then you must set gains as fixed in gain settings. By default they are set to adjustable. If this is missed, it will appear as though safe works when the switch is set to that, but when switched to as3x only, nothing happens. Try putting gains on fixed to get it all functioning if your transmitter has no adjustable gain knob or switch

@esill2995 2 года назад

Good catch. It took me awhile to figure this out on my own.

@mmmasterscross7915 3 года назад

Love HH always there to help and HH is innovative.

@marinrealestatephotography Год назад

Thanks for the video. This is very helpful. Will have to get around to updating my transmitter I guess.

@trevorkilbey9761 Год назад

I swapped my DX8e to an NX8, mostly so I could get updates on Wifi. Great improvement. My Timber Turbo Evo had been set up with DX8e so I saved the settings to SD and then installed in NX8. After binding, all the functions and switches were correct, correct control responses. Off for a test flight then I discovered AS3X worked but no safe. Basic bind error as in effect I disabled safe, so following the bind procedure it is most important after you remove the bind plug, that the transmitter is off. You then hold down the bind button and at the same time turn on transmitter. The display will then show binding and configuration, when complete you are done. I find the accompanying manual highly lacking in clear explanations on gyros and AS3X as well as some other features. Having the receiver AS637TA delivered with the Timber Turbo EVO, I do not have the option of 1st time settings and forward programming goes straight to the single Gyro option and it does not give me option to set the gains. All of the instructional videos I have watched do not show how to adjust gain without the 1st time set up. How to access the gin settings. Telemetry tells me what the current setting are, but I cannot change them. Frustrated like hell. Trevor Kilbey

@ret737 3 года назад

Thank you for the more simplified version for AS3X and SAFE programming. I watched all the Spektrum videos pertaining to this receiver but this video gave me the info I needed to program AS3X and SAFE as if it were a BNF model without the complexities of mass programming. Can I program an AR636 with my iX20 or do I have to do that old school i.e. cable and laptop?

@w.j.bendellr.c.flying.1037 3 года назад

That’s a good question I would like to know also, with the NX-8 🤔

@RoadsideRC 7 месяцев назад

I have tried to follow the video with my NX8 and AR637T....but I don't get many flight mode screens and setup screens you show. I can do the test you show at the end and confirm SAFE works, but can't confirm AS3X at all. What do I do now?

@w.j.bendellr.c.flying.1037 3 года назад

Great Job ⭐️⭐️⭐️⭐️⭐️, now I have to go through this with my DX6e and try to make it happen.🙏🏼

@ItAintMeBabe99 3 месяца назад

Good video! Wish you would have explained what Flight Mode is.

@user-fc9gd9xm1d 10 месяцев назад

Great video

@TheAuldprop 3 года назад

I ha v e jus t purchased an N X 8 and a A R8360 T A S X 3 and Im new to Spektrum. If I follow this video will it be applicable to my set up? I cant find any videos for my A R 8360T . Also I have stuffed up Flight modes . How doe I set them back to "factory"Thanks, Paul

@stevendegiorgio3143 7 месяцев назад

I didn't know that AS3X goes away at extream stick movement.I was also wondering If I could get forward programing on my old gen 1 DX8 silver version.I have the firmware updated to the latested version of 3,01 (September 2014).

@Tallguysrc 3 года назад

thanks for this video it's the one that should have been made first

@gisall8205 Год назад

Great, understandable, video. Got a question. I have an "Updated" DX9 Transmitter, and a brand new "Un programmed" AR631 Receiver. Will these series of events work with this combination. For the most part. Let me know please. THANKS.

@GlidersByStefan 2 года назад

Very well explained! Thanks 👍

@uhebeisen Год назад

Building an old balsa pylon model which is having only aileron and elevator to control. I am planning to have 2 servos for the ailerons. Would ASX3 or even SAFE be a possible help to assist me without rudder control? Using a Spektrum NX6 and an AR630.

@ericubkd2189 Год назад

I'm well trained to program older 636 series with AS3X Programmer where we had to correctly set up the surfaces direction to get proper AS3X response. On the newer Forward Programming enabled Rx series, there is no more surfaces settings in the FP menus (or I missed it)... So I'm wondering the Tx/Rx can know the right servo direction in order to get AS3X/Safe working properly? And how may we reverse a surface direction in case of wrong surface direction (during AS3X/Safe test)? 🤔

@RPRUCH77 2 года назад

All of the videos I have watched for the AR636B say DON'T REVERSE SERVOS IN THE RADIO. Is this something new now changing them in the radio.

@duncanwilliams9470 3 года назад

Kyle......an F Mode question: on the flight mode channel that has AS3X and SAFE turned off, do I set both selections on the menu to Inhibit? (The video looked like AS3X was set to Active on the clean channel)

@horizonhobby 3 года назад

AS3X can still be "active" on the clean channel as long as your gains are at 0%. Two different ways to skin a cat in theory ;).

@duncanwilliams9470 3 года назад

@@horizonhobby Excellent...Thanks Kyle!

@carllubbok4375 Год назад

Question: After initial forward program setup, let say, I want to move my AR637T to a different HH airplane.... what is the correct process of re-setting up the AR637T? Do I just need to do a "relearn servo settings"? Or do I need to do a "Factory Reset" and then redo forward programming after I have properly setup all my servos and channel assignments?

@txkflier 2 года назад

Somehow, I missed the menu option "Level model and capture attitude" at 10:30. Not that it really matters because I always have to enter a nose-up pitch attitude correction after test flying my planes. They all kick the elevator up some whenever I go into SAFE mode with them sitting level on the ground.

@spacecadet1249 3 года назад

Tom: Great video. I didn't see how to use the flight mode switch to select between AS3X and Safe mode on and off. Do you have this in a PDF document so I won't have to rewind so many times? I just got a new NX8 and it came with a AR8020T receiver and I'm trying to Forward Program it. A written document would be great but I can't find it anywhere on the Spektrum or Horizon websites

@I_am_archie 2 года назад

Did you figure out how to put safe into flight mode switch? I have an ix12 and just put safe on its own two way switch channel 7 aux 2. I couldn't figure out how to have it assigned to flight mode switch.

@spacecadet1249 2 года назад

@@I_am_archie yes I did. I put together a word document that I call “The missing manual”. My instructions are in it. Position “0” of the Flight mode switch has both turned off. Position 1 has AS3X on. Position 2 has BOTH AS3X and Safe Envelope mode on. I found no way to turn AS3X off while Safe Envelope is on. If this sounds like it will work for you, I can email the document, or how else to send it? It’s about 10 pages long cuz it has a bunch of other undocumented tips in there too.

@Bellairvideo 3 года назад

Love your informative video's. You just keep getting better & better at letting us novices know about RC. Big fan of Eflite & Spektrum...and a big collector of them also. Summer flying fun here in OZ at the nearby beach (youtube/bellairvideo) and have purchased two of these receivers, so will try & program them successfully now. Many thanks. Keep safe & well & have a wonderful Christmas

@stevelhamon2031 2 года назад

Help! I have a DX6E with a AR630 receiver. I’m trying to set up as3x and safe on a 6 channel edf jet. I can get it programmed with both but I can’t turn off the safe, it’s on full time. ????

@1stMarine 3 года назад

Great job 👌

@horizonhobby 3 года назад

Thank you!

@w.j.bendellr.c.flying.1037 3 года назад

Great Job ⭐️⭐️⭐️⭐️⭐️

@yonylobaina7613 2 года назад

How can I use the dual elevator with as3x, only the elevator channel works, the auxiliary does not work with as3x, how can I solve this?

@mr.d7776 2 года назад

Very helpfull video. Good job, thanks.

@av8tore71 2 года назад

Would these settings work for a scratch built aircraft? I just made a P-47 out of Home Depot foam board and Balsa. I followed everything just I'm still having trouble with SAFE. AS3X works like a champ but as I turn over the plane SAFE isn't working for me

@kobyonekanobie2790 Год назад

I need help please I have a DX6e somehow got the throttle working on the ailerons stick, I have had lots of RC never a transmitter like this but I am lost in space please help

@Starlifter-Flight-engineer 2 года назад

I just purchased the new night radian and trying to set it up on my DX6 Gen 3 transmitter. and there is no forward programing menu on menu screen. is there a upgrade that i need to do to get it to load?

@Frank-ft3lb Год назад

Good video but you don't mention anything about YAW. When I first setup my AR630 with a DX6 transmitter update to 2.09 I wasn't able to see the rudder move when testing it on the bench. I then went into the Heading settings and changed YAW which was set to 0. They also issue a warning above the YAW setting. Can you suggest a good starting value for YAW in both AS3X and Safe? Why the warning about YAW? Thank you

@marinrealestatephotography Год назад

I don't know about as3x, but my understanding is that SAFE only affects roll and pitch controls, but not the rudder.

@jimworley7385 2 года назад

I have a DX8 G1 which I love. Is there a firmware update for that transmitter to be compatible with Forward Programming?

@davidthorpe6139 2 года назад

Finally an understandable video that applies to what I need to do! Thank you!

@williamwallace9427 2 года назад

Thanks!

@deppi 3 года назад

Is there a way to adjust control surface deflections on a bnf plane? My F 16 Thunderbird bnf 70 mm has AR631 and i noticed when safe switch is on my control surfaces move almost 40 to 50% less and when i turn safe off it is normal movement. Its very strange. My other f 15 eagle does not do that and both in safe and not safe control surfaces move exact same amount. I am so confused. . Is there an issue with the AR631 reciever you think? I am scared to even fly it again since i can clearly see control surfaces are not going to its capacity or limits. Any help would be helful man. Thank you.

@aquaticthumb5193 Год назад

Panic a full throttle setting big questions. is it like hitting a panic button?

@MrALDO42 3 года назад

My AR637T won’t finish. Followed your directions and when I get to Apply at the end nothing happens. My screen returns to the original choice and Safe doesn’t load. Any clues?

@mixsetup 2 года назад

Thank you so much. Is there a video about the gains settings?

@shreddinjoe 3 года назад

Well...i followed u along to every move. I got Safe working but not AS3X...HELPPPPP!

@octane2099 3 года назад

On the AR8360T with safe can I do all this programing on my computer with the cable like I do with my AR636 set up my safe and reverse the throws

@mvelardo 3 года назад

Great video. Does the AR8020T have SAFE Select and AS3X? Because when I go to the Forward Programming menu I don't see the Gyro option you showed. Thanks.

@Tomster22079 2 года назад

Is forward programming possible with a DX18 v1 with New airware 2.09 SW ? Does an tm1000 interrupt forward Programming ?

@todd_s1965 3 года назад

I have a question: When I am flying I use safe mode, but when I am higher in altitude I assigned a switch to turn safe off so I can do some maneuvers. I have enough flight experience now but I am afraid to go off of safe completely but can't use safe for rolls, etc. Is there a more advanced mode that stabilizes the plane without being in full safe mode?

@dalerbsr.5061 3 года назад

Thanks, good info

@horizonhobby 3 года назад

You are welcome!

@garyphillips6949 2 года назад

I have tried a dozen times to get safe programmed in to an ar630 with Nx8 on gear channel and it never works.

@bigsby2076 2 года назад

After setting up forward programing, is there anything else you have to configure? Like dual rates?

@davidbohner2061 3 года назад

Why can’t you full screen the transmitter screen squared up and not at an angle? Too fast and confusing. Slow down.

@shreddinjoe 3 года назад

I have the AR630 reciever, 6v rated digital servos, and i bought the Spektrum Smart 3200 9.9 Life reciever battery pack. Will the reciever and servos be ok with this much voltage? I wouldnt wanna roast anything...especially in mid flight. I noticed the reciever has a 9v rating. Hope i didnt make a mistake by buying those reciever packs

@bernfranfrancis3012 2 года назад

I am not able to have both SAFE and more than one other flight mode, is this correct or am I still missing something?

@bobhodge9646 3 года назад

My NX6 will not connect to my new 1.5 mustang with Avion ESC, any help to trouble shooting ? thank

@brandonmathis1335 3 года назад

I've got a DX8G1 and an AR8360T. I can't do forward programming on my transmitter to setup AS3X or SAFE. My friend has a newer transmitter, I believe a DX6E. Could we use the DX6E to setup Forward Programming>Gyro Settings to setup AS3X and SAFE on my AR8360T and could I then use my DX8G1 to fly my plane and get the benefits of AS3X and SAFE? Thanks for any help and thanks for all the great content!

@57heeler 3 года назад

something seems off to me....I have a Turbo Timber, the manual is quite clear on how to activate AS3X and SAFE. It was NOTHING like all that he just went through. Activating Safe is determined by how you bind the plane with the bind plug, then hold the gimbles together and flip a switch 5 full toggles to assign it. AS3X can be left out but who would - SAFE is assigned to a switch and activate if you get in a bind. Is this video talking about something all together different or is it the plane that he's using that makes the difference?

@cgdurant1 3 года назад

Timber is a bind and fly already set up for as3x if you use bind plugs as it says in manual. You cannot get into forward programming on bind and fly unless you Jail break it (which is another spectrum video). This video is for a brand new receiver out of the box for any plane you put it in. Basically you are programming what they do already for bind and fly aircraft out of the box. Bind and fly just has horizon having done all this for you

@rcmodeler2 3 года назад

Quick question/comment. I had previously been told by Spektrum that one should never reverse the servo in the TX for aileron/elevator or rudder . Only in the RX because the SAFE will be reversed. Am I mistaken?

@jean-micheldupont1150 3 года назад

I think that's true for the older receivers like AR636A

@MrBlompod 3 года назад

Hello, I have installed an AR8360T receiver in my gas plane. It’s a 3D 8 channel aircraft and my radio is a DX8G2 therefore all my channels are used. I know I can’t have safe as there’s no available channel for it but can I still have AS3X stability with no available channel? Or will I absolutely need a 9 or 10 channel radio to have the AS3X functioning?

@Ouch. 2 года назад

I have a Spektum NX8 and several AR635 teceivers. Can I get safe select to work on these??

@derekl7019 3 года назад

Hi , I have a couple of these receivers having just come back to rc from the stone ages about 35 years ago . I have put one of them in a RES style so that I can have the vario , altimeter and rx battery status . Having only Rudder , Elevator & Spoilers I have plugged the rudder into the aileron port in the receiver , so will I still have the AS3X & Safe Select modes available when we are finally allowed to fly again soon in the UK . Thanks for a great tutorial !

@jimmieleonard7856 3 года назад

Please do a video on how to unlock a AR637. I paid for the receiver and would like to be able to use it in another plane, with safe. Why do you need to lock the channels in the first place?

@DangerRick 3 года назад

Have one of these on back order at HH. Looking forward to setting it up on my dx6e!

@chrisambrose8838 3 года назад

Good luck with that ! 🤬

@jameshoutsinger4190 Год назад

Great video! When I switch off safe AS3X also turns off. How can I turn off safe and still have AS3X ? Thanks

@koalatails5711 Год назад

Same problem with mine. I’m going to check the gains are switched to fixed. Someone wrote about this in one of the comments.

@Bellairvideo 3 года назад

Can you advise the difference between an AR 630 & AR 631 receiver please. Is it just an added antenna.

@akbarshoed 2 года назад

Question: Gains. What does gains mean or refer to in this context?

@bristolanderson9577 3 года назад

Hi guys, I just got the 1.2 Corsair yesterday and I’m trying to setup AS3X on my nx6 and when I hit forward programming it says “connection failed”. I’ve tried several times but nothings working. Any insight?

@horizonhobby 3 года назад

The Corsair does not support Forward Programming. The BNF model utilizes older receiver technology. You would have to upgrade the receiver to take advantage of this feature, unfortunately.

@wheelhorse518h 2 года назад

I had the cj6 V2 it's a good plane

@Hiergibtesnixzusehen 3 года назад

My Dx8 always say „Flight pack no data“ ? What does it mean?? It says it every 3 seconds

@WarbirdFan66 3 года назад

nice joby guys, so if i understand correctly if i get one of your 637 rx`s i can programm it with my DX8 Gen.2 - is there a difference maybe because im from germany or will this work with the same hardware sold here too???

@nolavigil5117 3 года назад

If I already programmaed as3x on a 637t but need to do mechanical adjustments to the plane like trim elevator, would i have to reset the receiver and start all over again?

@horizonhobby 3 года назад

Not necessarily, but we do recommend entering the forward programming menu and selecting the "relearn servo settings" option.

@WDjacques Год назад

Can I do this set up with the Spektrum DX6i

@kennywohltman436 3 года назад

Great video. Just wondering is it possible to put as3x on a nitro plane?

@horizonhobby 3 года назад

Absolutely. We actually have plans to convert our 10cc Ultra Stick to glow power yet retain the functionality of the AR637 show in this video AND here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZqPA8fyLBh8.html

@lucaspoole8866 3 года назад

This works on ANY RC plane/Jet?? Correct! Because I already own all of the E-flite jets. I want a couple of the Freewing and FMS ones but never got them because none of them have safe I guess with this process now they will and I can buy & fly other Jets!!! Thank goodness!!

@prowlus 3 года назад

I got mine working on a ripmax wott

@Dg-zj6jo Год назад

brilliant

@mauriceartiles3968 5 месяцев назад

My issue is my transmitter won’t read a single sd card I have

@repazrepaz8605 3 года назад

I have the dx6e and i dont have forward Programming and i want to have safe on my plane now how Do i Do it

@Bellairvideo 3 года назад

Here is an interesting Question: I have had a couple of FMS model aircraft including the Super Viper & The Avanti V3. I then have taken the 636 receiver from the E-flite Viper & installed in the Super Viper (same aircraft) & then the Avanti. The both fly beautifully in SAFE mode.I would have loved to have purchased from Spektrum the 636 for say the Viper set up, but this is not sold as a safe or AS3X set up programmed & ready to install. I wonder why? I know now we can do this ourselves with the 630 or 637T, but it would have been great to buy the 636 already set up for a specific model.

@johnreed6363 3 года назад

You can send your current AR636 settings to a virgin AR636 using the PC or mobile App. Here's a video briefly explaining how to - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9lufZv72Ino.html

@Bellairvideo 3 года назад

Well done John.... i will look at this! Happy Christmas mate

@dannydj49 3 года назад

Well forward programming work on a AR637T receiver

@horizonhobby 3 года назад

Yes.

@markbutler7027 3 года назад

Will forward programming work on a DX18 gen 1 transmitter?

@horizonhobby 3 года назад

Yes, it will work ;).

@modelaircraft6576 3 года назад

Can you use the 6 channel receiver to program as3x in a 6 channel plane

@geraldbuckley5925 3 года назад

Question: When you first fly the plane after setting up as3x and Safe, trim the plane (with Safe off) to get it to fly straight and level, will Safe then use those adjustments as it’s base? Also, can you trim it while in Safe?

@horizonhobby 3 года назад

Great question! We are going to pass this over to the Spektrum team to make 100% sure we convey the correct response.

@horizonhobby 3 года назад

Gerald, hopefully this makes sense. Setup/trim the plan in non-gyro OR AS3X mode first. These trim adjustments will carry over into SAFE mode (unless you have some other flight mode programmed that prevents this). However, SAFE will take priority over these trim adjustments as it will always return the plane to the "attitude" settings you programmed on the bench, regardless of trim. So, if the plane makes some awkward/undesired response when you flip into SAFE mode, it is likely you need to recapture/program the attitude settings (on the bench).

@MJBorrett2379 3 года назад

I have brought the AR637T telemetry receiver, does any know what the black and red wire with what looks to be a white two pin plug is used for that it came with?

@derekl7019 3 года назад

@@MJBorrett2379 Hi , it's for rx battery voltage telemetry . I have just put one of theses receivers in an F3 RES glider to give me various & altitude telemetry , but I also soldered the black & red lead you mentioned into nimh battery lead and plugged it into the " D " voltage sensor port on the receiver . Now flick a switch on the tx and a nice lady tells me the rx voltage ! COOL , Hope this helps , I'm still waiting to find out if safe etc will be as effective with just RES . Stay safe !

@Wesapp212 3 года назад

Wish you guys would sell the IX 12 in white again

@random_g-man9754 3 года назад

Forget the forward programming, what plane is that?

@jtepsr 3 года назад

is this setup the same as the AR6610T receiver that came with the nx 6 radio. can i use the AR6610T receiver in this plane.

@horizonhobby 3 года назад

Technically the setup is the same, but there really isn't "forward programming" with the 6610 since it does NOT have AS3X or SAFE Select. Yes, it will work in the CJ-6.

@perrry100 2 года назад

Does the NX 6 have bluetooth ?

@TheGhostfaceKLR 3 года назад

Doesn't work. No matter what I do I can't get the flight mode to change when I flip the assigned switch. So frustrating. Once OpenTX supports forward programming I can toss this POS DX6 back in the box.