In this video series we will cover the full setup process for the AR7200BX / Beast X flybarless systems. Please follow along in this series and by the end you will know how to setup and use your system :)
The way you explain everything, the way you do! Even an Old Analog Goat like me can understand. Watching and listening to you has boosted my confidence in making changes to my Helicopter's. It's really, really tough for me to find a builder so like everything else, I am pretty much self taught. Thank you Sir!
@@33forsaken how you doing, weve spoken a few times over last few years and again ive always recommended your tutorials to everyone on the facebook Align page. i commented to you a couple weeks ago about doing a tutorial on the fc6250hx fbl control unit. iam currently trying this on a trex550E older flybar converted to fbl , i seem to be having all sorts of issues! are planning on doing a blog on this unit ?
Nice to see you again young fella,remember your fascinating videos years back. Another amazing video and thank you for all your (5 star) show. Than you.
Freddy so brilliant....I will use your technique in the next few weeks when I get to it, on my XL550 ..I am building... But I also have a Align 600 XL which has been terrible to fly...So I am going to start again with your videos and reset it as you describe.. Very much appreciated
I believe they are still for purchase US. It may be a new model by now or even the align integration or the spektrum one. Also heli freak and other FB sells groups have them for sure.
Hi Freddy i got a beast x plus tied in spektrum radio but the beast will not reconize the rx (any ideas ) help !!!! wiring seems to be correct and i can start motor
Привет друг.Нужна твоя помощь в настройке вертолета BIADE500X, медленно возвращаются сервоприводы в центральное положение,AR7200BX SPEKTRUM DX6I,как настроить быстродействие сервоприводов?Помоги пожалуйста я новичок но очень хочу научиться управлять вертолетом.Помогите
HELLO FREDDY!!, I HAVE A RAPTOR 50 SE AND I HAVE A 3 BLADE HEAD TO INSTAL AS355 FUSELAGE AND I CANT COFIGURE THE 1 SERVO SETUP ON MY DX9 BLACK EDITION I CANT GET THE SERVOS TO MIX PROPERLY, I WAS TOLD TO SET THE GYRO TO MECHANICAL,I NEED HELP IF YOU CAN. THANKS FREDDY WHEN YOU HAVE TIME..
Sill question but are you using the AR7200bx for this setup? Shoot me a PM on Facebook maybe I can help out :) I have built a Bergens intrepid before and I believe I had the same setup.
I just purchased a 450 size heli and Im trying to decide on what receiver to go with. I have 2 in mind AR722BX and SPMFC6250HX . Which one do you recomend???
Freddy you did a fantastic demonstration on how to setup the AR7200BX . I have to ask though if you have you choice or preference which would you prefer the AR7200BX or the BeastX MicroBeast Plus I just don't know which one to place on my Bird ..Help .. Thanks again for all your help ..
Hi Freddie.. i only have little movement on the swash now i setup the alierons 6 degree is that right.neg 6.6 and pos 6.8 blades front to back.. will that be ok.. then 12.5 and -12.5 pitch.. all in all limited swash now with all this setup..is that right...
Hi Freddie. I watched all 4 videos in your series a few nights ago, most informative, thank you. I'm really struggling with my set up. I'm new to RC, I bought a second hand 'as new' Trex450 and I have a DX6 with 4651T receiver. I've fitted a TGZ380 BeastX clone but cannot get it all to bind. Do I need an adapter lead between the RX and the TGZ380? Cheers.
I do not believe this to be needed for this FBL system. Some other ones like the 3gx and older had you push the button then power on to enter programming modes.
hello sir thank you for the setup procedure very helpful! can u tell me with my 450 size heli do you think it would be better to supply power to the beastx and to my spektrum reciever? i know they say anything over a 450 size you should supply power to both. can you give me your take on that? THX
So are you using the beast x plus or something different then the AR7200? If so then yes double redundancy is always nice for receivers. However with the AR7200 in particular it does not need a receiver so you can run a double redundancy cable to just the FBL.
hi when the beast x is setup up and finished, should my aileron pitch be 6 degree at top and bottom stick so it only banks over 6 degree maximum...is that correct ..
No the AR7200BX is the receiver and you just plug in the SAT. It connects right in the center of where all the servo pins are. You will see the insert for the Spektrum SAT.
Hey Freddie... Have another question. While powered up and I flip the "D" switch on my DX6E the lights on the RX dance around. Any idea what that is??? Or what I'm changing??
@@33forsaken so what is the SAT? If this is the rx and fbl? Im new to this not done a build yet and learning on a blade 230s v2 with the help of your videos. Cheers!
@@33forsaken thanks will do if any problems come along i dod get the helicopter flying yesterday very hard compared to my 6g helis and drones but manageable will need to learn more did have problems with the flaps switch were i did not know why my tail servo wouldn't respond to commands after existing setup but figured out I hadn't set my gyro percentage on the transmitter
Hi Freddy. I was reading manual on attitude control (microbeast plus pro edition) and it stated that attitude control must be swiched off during take off and landing. Why not with it? You take off and land in horizontal position and I do not apply any inputs during take off (maybe just a little right aile after it is an inch or two in the air to compensate for drift to the left). I think what they ment is if the heli is on the ground, then you should not make any inputs from the right stick. What is your opinion?
