ARB TYRE REPAIR KIT: HOW TO PLUG A PUNCTURED TYRE

Подписаться 4,4 тыс.

Просмотров 83 тыс.

50% 1

ARB TYRE REPAIR KIT: HOW TO PLUG A PUNCTURED TYRE.
Watch this video and see how I repair my punctured tyre using an ARB SPEEDY SEAL PUNCTURE REPAIR KIT SERIES II on my 2016 Ford Ranger Wildtrak. Thanks for watching, please give a thumbs up and subscribe to our channel.
ARB Tyre Repair Kit: www.arb.com.au/air-compressor...
🔴 Subscribe:ru-vid.com/show-UCJ4D...
COME SAY HI!
Instagram: venturing_f...
Facebook: / venturingfour
My 2019 KIT for Filmmaking, Photography & Vlogs:
Camera Bag: amzn.to/36OrxvJ
Osmo Action Camera: amzn.to/2TiYrk8
ND's for my Osmo Action: amzn.to/2R9y3GA
My Drone : amzn.to/2RatHz4
ND's For my Drone: amzn.to/3a9Rbx5
ND's For my Drone: amzn.to/37XcdwE
My Smaller Drone : amzn.to/2TtZLAT
3 Legged Thing Tripod: amzn.to/3810m0D
3 Legged Thing Tripod: amzn.to/35J8fX6
3 Legged Thing Tripod: amzn.to/2uJSi6h
Rode Video Mic: amzn.to/2Np50hk
My Gimbal: amzn.to/35Ky6Ol
Sandisk Extreme Memory Card: amzn.to/30f9xYR
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Venturing Four so we can continue to provide you with free content!

Авто/Мото

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@nathanoleson8428 Год назад

Thank you for including the first failed attempt, makes the video that much more informative to see how its done wrong first, then successful

@sharingtheadventure 25 дней назад

Thank you for keeping the difficult parts in there..

@Toubabou 3 года назад

Nice video.... attended a training this week end , a 70 yo lady managed to fix a tyre Overinflate the tyre, the steel wiring is not so tight . It really renders the exercise effortless Rather than screwing action , yanking the reamer in and out is more efficient High pressure gets those plugs in without breaking a sweat

@troymcdonald1417 Год назад

This video is much more insightful then the 30 second clips people post I got a kit from repco and managed to get it done in one go pretty tough but got me out of trouble on a Sunday and a Monday being a public holiday safe to say I won’t be going to tyre shops anymore for just a puncture 🙂

@lukaszbebnowski7633 2 месяца назад

Mate awesome instructions, you’ve shown the whole process even the little set back and how to trouble shoot it. Thank you lots for posting this video, am sure many will find it useful.

@XploringOz 4 года назад

Nice work mate, great video. I'm glad you include 'take 1', just goes to show, not always as easy as it is on TV. Keep the video's coming. Cheers, Nathan.

@venturingfour 4 года назад

XploringOz thanks Nathan, its good to keep it real 😅 got plenty more to come, stay tuned 👍🤙

@enoz.j3506 2 месяца назад

Bought similar, used it today, bit of effort like you to get the string in,but it fixed my puncture ,perfect, recommended.

@CactusAtlas Год назад

I appreciate this video. It was good to see you struggle a bit on attempt 1 so an inexperienced person like me knows what I might contend with if I have to make a repair out on the road.

@hfk1001 Год назад

Excellent video, thanks. I'm glad you didn't cut the failed attempt: that emphasized to me that it might take extra elbow grease to get the job done. I'm prepping for a jeep trip that will kick off next week, and I just purchased an ARB repair kit. Your vid told me what I needed to know. Cheers.

@charlesadams3036 3 года назад

Such a tight rope trying to help/educate without putting novices at risk. Nice job.

@mozartheart2958 Год назад

Thanks for showing your failed attempts, made the video very informative and beneficial.

@kramernaylor7810 3 года назад

Put lube on the needle part to get the plug in smoother

@damianleonard6348 3 года назад

Thanks mate..great info.. Just watched another similar video & great tip there was to first rotate tyre so puncture site is easily accessed and you can put downward pressure /body weight into plug insertion. Front tyre easier of course to reposition with steering- depending on puncture site access esp back tyre you may still need to take off tyre in some instances..

@lequang2296 3 года назад

Apply some more lubricant to the string would help Great clip step by step Thanks for sharing

@h069401 3 года назад

Good job, I had the same experience today; it's hard work but very satisfying after it's done!

@adnanmj7203 Год назад

That’s so helpful thank u so much from Saudi arabia

@nobody-zl7gg 2 года назад

Got a similar kit, I practiced with some old tyres first, when I needed it I knew what to do.

@idahomountainelk 4 года назад

Thanks for the video. This tool looks pretty robust and trail worthy.

@venturingfour 4 года назад

idahomountainelk your welcome! It’s a great piece of kit that should be carried in every vehicle 🚗 👍

@OzTrax4X4 3 года назад

Excellent explanation. I actually had to plug a passenger car tyre today and my kit had zero instructions. Thanks for the quality how-to. 🤙

@frantiseklupinek6189 Год назад

I will definitely buy a puncture repair kit. It will pay for itself after the first puncture.

@Lewythefly 3 года назад

You need to give the reemer a good rip when you pull it out to smooth out the hole and do it a few times with such a small hole

@alexignatov1053 Год назад

Thank you, very helpful video!

@michaelzammit9384 3 года назад

Great video man, it’s helped me to buy one now 👍🏼

@venturingfour 3 года назад

Michael Zammit thanks for watching!! And happy to have helped you to make your decision 👍

@gilltim5711 2 года назад

Illuminating. Thank you.

@ramadhiantoagung5086 3 года назад

To the guys who watch this video : read the manual BEFORE you pull the nail/screw. It will save you lots of headace especiallly if its a slow leak

@rogerdickinson920 3 года назад

Put an X on the leak with a white crayon before pulling out the object. In the dark or rain you will lose the hole location.

@venturingfour 3 года назад

Roger Dickinson great tip 👍

@martytee4042 3 года назад

Had the same problem with a screw funnily enough on brand new Falken wildpeaks. I got the smaller ones in finally ..they leaked when tested. Cheap slime kit. Tried the thicker plugs, difficult to get in but worked. Then had same situation on partners car.. leaked on smaller plugs even with glue. Have now bought a set very similiar to the ARB one. Hopefully I dont have to repair another soon. Thanks for the video

@venturingfour 3 года назад

Hey Marty!! Thanks for watching!! I actually repaired one of my tyres yesterday and it took me 10mins to do everything. Never tried smaller plugs but definitely never had any leaks with the bigger ones. Good to hear you got something similar to mine. 👍

@dhflannagan1 2 года назад

Thanks for the video.

@m1chi13l 9 месяцев назад

I'm here because I also couldn't get the Damn rope inserted! Only had a pop rivet in the tyre, couldn't ream it either so had to drill the hole out Glad I'm in my garage, it wouldn't be fun first time on the side of the road!

@venturingfour 9 месяцев назад

After now doing it a handful of times, I can honestly say that the tyre is better off to be dead flat. If there is any air left just take it out. My tyre on this video was still 3/4 full of air. 👍

@nicholasvanderwolf1803 Год назад

Dont use lubricants more recommended avoiding contamination , And take notice about the metal bands in the tyre the tool needs to be pushed in without catching them , Explanation is imagine a fork approaching a band on how to pass it you turn it side ways , glue on the sleuth will help insertion .

@matthewpriceless5157 3 года назад

Good job mate!

@venturingfour 3 года назад

Matthew Priceless thanks mate 👍

@MrPropanePete 3 года назад

Thanks for the video. The ARB instruction videos don't show that sometimes quite a bit of grunt is required to push the insertion tool all the way in.

@venturingfour 3 года назад

PropanePete thanks for your comment and thanks for watching! 👊

@Central_CoastRotors 3 года назад

Well done mate....I might add that a portable compressor is always worth the money in such situations.

@hiltong524 3 года назад

Ryobi 18v is great for this.

@hiltong524 3 года назад

My kit has rubber cement which also acts as a lubricant. Also handy is a ryobi 18v one+ tyre inflator R18DPI-0. I prefer to take the tyre off as i get more leverage and control. Plus, there maybe more than 1 puncture.

@butcher9266 2 года назад

I have always used rubber cement also. Works as a lubricant and helps to seal it.

@RobertJLessard 2 года назад

You almost had it on attempt 1! I don't think they give good instructions. The reamer tool needs to be pulled in and out without rotating it. That's how you get a nice round hole. The plug goes in easier that way too. 👍

@lugiasean19 3 года назад

Done this at least 10 times with tires fully inflated and never had a problem. I believe the trick is to ream in and out a few times really good in a straight fast motion. Doing this will make the hole ready to insert the plug. When on target with the plug insert it quickly with heavy initial force and a good circular wiggle motion if necessary. That should do the trick.

@applepoop10 3 года назад

You can also use an adhesive if you are worried about small leaks. But it is not necessary.

@glen1792 2 года назад

Thanks buddy👍

@tag6tag 3 года назад

My kit came with rubber glue that you need. To cover the chord with before inserting, maybe all kits are different, good video.

@trevor311264 2 года назад

I have done literally dozens of these, you don't need rubber solution, I don't know why it is in the kits.

@timheath6318 3 месяца назад

A kit with the tube patching set contains a Tube of Ribber Cement - used with the patches to repair punctured invinner tubes

@daveallen4878 Год назад

It's a lot easier if the tyer is completely flat. Lol😂

@venturingfour Год назад

Yep I totally agree, I’ve learned a lot since making this vid a few years ago 👍

@tristan363 3 года назад

Just bought myself a el cheapo kit too. Hope it will hold up in the outdoors. Good video and humorous too. Just wondering would you need a new wheel alignment because the rubber strip could cause imbalance?

@venturingfour 3 года назад

Hey Tristan!! I’d say no but is always best to check with your local tyre dealer 👍

@philg2468 4 года назад

Good honest video - well done. I have bought smaller plugs from Bushranger which are better for small holes in the tread like those from screws and nails - much easier to insert. I've used those plugs for 20 years, and in all honesty, I'd take it to a tyre dealer and get a mushroom plug put in for a tread puncture. But when out remote, the plug kits come into their own and a small stake in the sidewall is easily fixed until you come back to civilisation. Cheers

@venturingfour 4 года назад

Phil Gaukroger thank you for your kind comment, it’s very much appreciated 👍

@petersauer3460 3 года назад

Good job!!!!!

@venturingfour 3 года назад

Peter Sauer thanks 😊

@bobhope8657 Год назад

Mine came with some rubber cement I lather the plugs on installation you don't really need lube are you sure it's lube

@starskymedia Год назад

Excellent instruction video, though it would have been good if you went into more detail on inflating your tyres again afterward and being careful on driving with a flat tyre for people who might not also have a air compressor on board

@acecriss9326 3 года назад

Good video.....Definitely a man's job..

@kevinanthony3888 6 месяцев назад

You are supposed to push and pull the tool a few times not twisting it as the hole needs to be abraded by the tool to make the hole bigger. Ta for the Vid m8.

@giampiero1149 3 года назад

thanks for this! will the repair affect wheel balance?

@venturingfour 3 года назад

Thanks for watching! As far as I'm aware it shouldn't effect it but probably best to seek professional advice 👍

@DIYJack 8 месяцев назад

Just wondering is this a perm solution or only temp until you can get to somewhere to replace the tyre? Or is it good enough to last until the tyre wears out?

@venturingfour 8 месяцев назад

Technically this is supposed to be temporary. After plugging your tyre you should go to your nearest tyre centre. However I’ve done my tyre and it’s been completely fine without attending to a tyre centre. 👍

@danl7944 2 года назад

You should put some rubber cement. That will help slide easyly.

@Iolis 3 года назад

It is easier if you first deflate the tyre so you are not working against the internal air pressure. Screw the reamer tool in but use the serrated edges to widen the hole by pulling in and out rather than screwing it out, Lastly, cut the excess as near to the tyre as possible.

@geoergebulldog6893 Год назад

Mate u r spot on

@herenow2895 2 года назад

Thanks for the heads up on how much grunt is needed. Did this repair last long ?

@venturingfour 2 года назад

Hey 👋 yes the repair is still going strong

@estiben3508 3 года назад

I was waching this for fun.....your mistake is u supposed to push in and out ...on the first tool...not circles...thats honey make the insert part easier.....

@Wrangzilla 2 года назад

40 cords!!! I haven’t used that many in the 30 years I’ve been driving. Guess this would be the last kit I’d ever have to buy.

@butcher9266 2 года назад

As long as the plug insert tool doesn't bend or break. The cheaper plug kits are made of cheaper metal and have broke a few times on me. I've been looking for one that has heavy duty hardened insert tool because if it breaks and you're on the road somewhere, you're screwed.

@bobhope8657 Год назад

It always helps to inflate the tire to atleast 38 psi for installation

@qamarshah1000 3 года назад

Whats about the wires inside tire, the will damaged or not ?

@venturingfour 3 года назад

Google tells me that it ‘may’ cause damage to the inside of the tyre.

@RaggedsEdge 3 года назад

I’ve struggled to insert the plug the last few times I’ve used a similar system. However they are E rated tires. I had to use a 2x4 jammed into the coil spring at the top of the wheel well to lever the plug and tool into the hole. A ratchet strap may work to help as well.

@venturingfour 3 года назад

RaggedsEdge thanks for the info. I had to repair my caravan Tyre the other day and it was super easy compared to the Ranger 👍

@richardgoff6739 Год назад

Before you insert, put lubricant on the strip.

@arturv83 Год назад

It this pretty much a permanent repair or will the tire need to be taken in to a tire shop to patch from the inside?

@venturingfour Год назад

Technically yes you should take it to a tire shop.

@neilfrasersmith 3 года назад

You need to really lube the 'insertion tool' before trying to insert it. You missed this step, that's why you are having so much trouble. Good video, thanks.

@sKeM2k9 3 года назад

If u use lube it will interfere with the adhesion of the glue... so no u don't want lube just gorilla fuck the shit out of the tire with the *insertion tool"... doesn't take to much effort.

@bobhope8657 Год назад

You won't break the plug by pushing don't be afraid to push hard you will stop it before the whole thing goes into the tire

@RussellHoughton 3 года назад

I would never buy a kit that did not have rubber cement with it. You need to use cement to lube and seal everything.

@DaveInBridport 2 года назад

Just bought a kit. Bit worried I may end up with totally flat tyre and no way of inflating it!

@venturingfour 2 года назад

You can always buy yourself a small compressor 👍

@hawbrandon351 2 года назад

Using an identical kit to this, I found that it’s missing a rubber cement/vulcanizing cement. Tire was flat the next day without rubber cement on strings.

@AHooozy 2 года назад

In my kit, the repair cord basically had the rubber cement/glue built-in as it was already all sticky.

@karlajensen100 Год назад

no glue?

@charlesadams3036 3 года назад

One word of caution, these are great for temporary fixes but should not be left as permanent. The best solution is a plug patch. Of course this isn’t a viable “trail repair”. Part of the reason for this is the damage to the belts that can’t be detected by just pushing a plug in. Cheers from America.

@krcright9746 2 года назад

Glad you never wasted your time using the ‘ BLACKJACK Tire Repair Kit. ‘ It’s a terrible unreliable kit all round. Plus ‘ BlackJack ‘ customer support team are the the worst support team by far and totally unhelpful!

@joalcant1231 2 года назад

your strength is not enough because tire is in 3 o clock position, better if it is in 12 o clock position.

@atwogun7751 2 года назад

RU-vid. The place where absolute novices upload "subject matter expertise" how to videos.

@edwardeplett3231 2 года назад

I better go to the gym before I use the kit mate 😂😂

@deanmacka4975 Год назад

Stuff me stubbie mate, how many have you used since then mate?

@venturingfour Год назад

Haha!! I’ve probably used it half a dozen times since this video. Pretty much have it down pat now 👍

@hiltong524 3 года назад

Please note this method is not advisable on the edge or side of the tyre, as this is where the rubber is thinnest. If in doubt, take the tyre to a professional who can inspect the damage.

@PeterAcrat 3 года назад

I once had a huge sidewall puncture in the bush. It took THREE plug strips to fill it - and then I drove 500km home. It sure got me out of strife. Do what you need to do.

@hiltong524 3 года назад

@@PeterAcrat True. At least it worked for you. :) I know when it happened to me the tyre was 1 week old. The repair wouldn't hold, as the tyre was no doubt had less rubber. Wow. 3 Strip plugs. Great video BTW.

@onemillbill2916 4 года назад

Getting weak Curly! It’s an age thing. I should know! 🤓

@venturingfour 4 года назад

Bill Downie I skipped my Weet-Bix for breakfast 🤣😂

@stevemcgee99 3 года назад

I'd like it but the case is too big.

@venturingfour 3 года назад

🤔 mine fits perfectly inside a box that’s sits in the rear of the Ute. Definitely worth having one in my opinion 👍

@stevemcgee99 3 года назад

@@venturingfour I'm getting the smittybuilt, and will upgrade the awl and needle.

@bobhope8657 Год назад

The reamer tool goes clockwise not counter

@tonylander3512 Год назад

You can get the kit on ebay for about $20

@itsmecen50red70 5 месяцев назад

hey bruv can you change the title, this is how not to plug a punctured tyre

@Fritsvrolijk 2 года назад

the strips are getting hard an you can not youse them after a 1 year

@venturingfour 2 года назад

Thanks for that. I used mine a few days ago and all seem ok still 👍

@bobhope8657 Год назад

Always twist the handle

@bobhope8657 Год назад

Try not to let alot of air out it will only make it harder

@bobhope8657 Год назад

You gotta be quicker than that trust me

@sKeM2k9 3 года назад

Lolllll I knew as soon as I looked at this video that u payed more than 10 dollars for that fukin kit lolllll 60 fukin dollars... bro that shit is 3 dollars at walmart... except u only get 6 cords

@marcopolo7588 Год назад

You forgot the lubricant.

@jasonb4835 2 года назад

i honestly dont know anyone paid what ARB ask for that kit hahaha its 29 bucks everywhere else

@BrekMartin 2 года назад

How much is this kid?

@venturingfour 2 года назад

Hey Brek, I paid $60 👍

@BrekMartin 2 года назад

@@venturingfour Fair enough. Looks like a rip off, but I see there is more to it than a cheap one, like that sleeve to force the plug off the end of the tool. I just had the handle of a cheap one break off on the way out. Then I pulled the rest out with pliers and the job is done. It could have stabbed my hand if it broke on the way in.

@venturingfour 2 года назад

Yes it’s definitely up there in price but like you said you do get what you pay for. ARB have always been a higher price tag but I seriously can’t fault it, I’ve used it a handful of times with zero issues.

@eegg6954 2 года назад

@@venturingfour This is not the ARB we knew. This kit is now made in China and is the same junk you buy on Amazon for $24 without the ARB name.

@omargwad2767 3 года назад

First of all you should have taken the tyre off reamed it out and used all you body weight to jake the cord in and the rip the handle out you should only ream once the issue your having is due to not using all your body weight and gravity that was your issue

@dirtyoff-roadaustralian5525 3 года назад

😂😂😂

@bobhope8657 Год назад

You don't have a leak you took out the screw and there's no air coming out just fill the hole with rubber cement

@bobhope8657 Год назад

You even have lube wth

@ea8454 3 года назад

Jesus, just change the fucking thing. WAY EASIER!

@venturingfour 3 года назад

🤣😂 maybe for my first try but now I’m able to do it in less than 5 minutes 👍

@markrundquist3348 3 года назад

Wow....really?...lol

@reverendbluejeans1748 Год назад

Done it, its a non skill

@punchabunch 2 года назад

whimp

@eegg6954 2 года назад

Chinese-made poor quality stuff with ARB name on it. Save your money and buy an American-made Western Weld kit for half the price! Mine came broken and ARB promised a replacement which was never sent. The only thing Australian in this is the words "Designed in Australia" on the Chinese box.

@bobhope8657 Год назад

I'm so much better at this