No video :(

Arduino 3D scanner IR distance sensor

Подписаться 581 тыс.

Просмотров 122 тыс.

50% 1

Best & Fast Prototype ($2 for 10 PCBs): www.jlcpcb.com
Thanks to JLCPCB for supporting this video.
This is an example of 3D scanner using IR distance sensor and step motors. As you can see in the video, the precision is not that good, but it is a perfect tutorial for learning purposes. To improve the precision you could: place tape over the IR led and make a small hole; use different better sensor; add better lead screw; use more measurements than 40; use more steps.
Help my projects on Patreon: / electronoobs
my Q&A page: electronoobs.co...
Canal en Español: / electronoobs en español
--------------------------------------------------------------------
LINKS
________________________________________________________
Tutorial: www.electronoob...
3D STL files: www.electronoob...
Meshlab: www.electronoob...
Code: www.electronoob...
Scheamtic: www.electronoob...
Code (NO end stop): www.electronoob...
Schematic (NO end stop): www.electronoob...
Inspired from video: • DIY 3D Scanner (Arduin...
COUPONS for you
________________________________________________________
Ultimate mobile sale: www.gearbest.c...
3D RepRap festival: www.gearbest.c...
Programmable soldering iron: www.gearbest.c...
Coupon: "GBMAR069"
DIGITAL MULTIMETER (9.9$): www.gearbest.c...
Coupon: "ZT102SALE"
PRINTERS
-------------------------------------
Ender 3(167€): www.gearbest.c...
SparkMaker SLA: www.gearbest.c...
Crealitu CR10: www.gearbest.c...
Coupon code: "11CR10EU" or "11CR10US"
ANET E10 (219$): www.gearbest.c...
Coupon code: "Anete10us"
TEVO Tarantula (175$): www.gearbest.c...
Coupon code: "Tarantulaus"
Creality CR10 MINI: www.gearbest.c...
COUPON: CR10MINI
Anet A8: www.gearbest.c...
Coupon code: "A8KIDA"
Like share and subscribe to motivate me. Thank you

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@ELECTRONOOBS 5 лет назад

See Super Make Something video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--qeD2__yK4c.html

@gpittule6166 4 года назад

Plz can u suggest how can I know dimensions of the printable structure by .stl file

@dimasdimasalang 3 года назад

How much did this project cost?

@enfieldadventure3114 Год назад

I'm not getting the complete scanner object in meshlab, can you mention any reason for it

@AnkitDahal-dr1jq 6 месяцев назад

@@enfieldadventure3114 me too ..what is the issue ? did you fix it now?

@ELECTRONOOBS 6 лет назад

Want to help my workshop: www.patreon.com/ELECTRONOOBS Thank you so much!

@NabilTouchie 2 года назад

So this is where Mr Innovative took "inspiration" glad to see you were actually honest about the results

@salvatorebarbaro5862 5 лет назад

thank you !! your site with the description of how to convert a 'point cloud' file to STL has solved me a big problem on how to make a 2.5D scanner to be connected to a CNC milling cutter to scan raised objects. Obviously I use a sensor based on laser triangulation that costs about $ 50 but has an accuracy of 0.1 mm :) which you could also use in your system to make it extremely accurate in the detection of points. Anyway thanks again !!

@ScienceLab760 6 лет назад

Nice project, thanks for share, maybe you need reduce the speed of rotation and take more quantity of points for increased the resolution.

@elsebas545 5 месяцев назад

Thanks for the project, it helped a lot in my own version for my class

@seabreezecoffeeroasters7994 6 лет назад

Great project. Might pay to consider belt or gear reduction on the turntable stepper to reduce mechanical noise/wobble on your readings.

@ofsanjay 6 лет назад

you can also make a 3d object in 3df Zephyr You only need 1 - camera ( phone or professional) 2-Software 3- mesh lab for view and editing Enough no need any high skill Made your face model with it.

@D4tChmiT Год назад

can i dont use PCBs and remplace it with Breadboard ?

@DaSnipz 6 лет назад

I really LOVE this project. Relatively easy to set up and plenty of opportunities to improve, great learning experience. I think I'll build it just to see how precise I can get mine :) THUMBS UP from me!

@ankitdahal9727 6 месяцев назад

Have you done this ?

@devindasrinath9957 6 лет назад

Really good,i watch your every videos and i interested about them ,so good luck my friend

@shehryarshaheen7115 6 лет назад

New innovation. As expected from you. Keep up the good work

@iMsMs 6 лет назад

You are a genius man! Keep it up

@nopparuj 6 лет назад

What about ultra high quality scan? More step, longer time but higher quality. Time is not a problem for me, it will be better if the quality is higher than you show in the video.

@TutosIngenieria 6 лет назад

Excellent way to make videos tutorials, i want to make videos like you, those are amazing.

@northshorepx 6 лет назад

what a brilliant project!!!!

@JeffriRanger 6 лет назад

Very nice!! I think it needs much part, it's very simple!

@MCsCreations 6 лет назад

Beautiful job, dude! Really nice! 😀 For a lot of applications that is more than enough. For example, if you need to make a support for something, you can scan it and use the 3d file to project the support. 😉

@geluidsbox9195 6 лет назад

This is so awesome, thanks for the awesome video! (none of your videos show up in my sub box btw). And when will you continue the brushed drone video's!

@hammoutihamdi 6 лет назад

This project is brilliant

@Felipe-53 4 года назад

Awesome, my friend! Very impressive indeed. Congrats and thanks for sharing.

@SuperMakeSomething 5 лет назад

Hello my friend! I am happy that you like the 3D scanner. An attribution to my original project that inspired your build would be appreciated. Thank you!

@ELECTRONOOBS 5 лет назад

Hi there. Really, thanks for your work. A link to your video is in the description of my video. I like your work. I can pin a comment with the link as well! Keep up!

@SuperMakeSomething 5 лет назад

@@ELECTRONOOBS Awesome! Thank you so much, I really appreciate it! I just found your channel and really like your projects -- fantastic work!

@ELECTRONOOBS 5 лет назад

@@SuperMakeSomething Well thanks. I know your channel for a long time but you post not that often. You have good projects and ideas!

@SuperMakeSomething 5 лет назад

@@ELECTRONOOBS Thanks! Yea, unfortunately I do not get to post videos as often as I would like to. Hopefully I will be able to dedicate more time to my channel as it grows in the future! However, there is a new video coming out (hopefully) this weekend, so be sure to stay tuned! ;) Cheers!

@tony91200211 6 лет назад

Made it super easy to make a 3D scanner

@RadixElektra 6 лет назад

Well done

@peetelectronics9781 6 лет назад

Cool project, is one of the project on my wish list, a 3d scanner.

@EitherEngenheiroBr Год назад

Man you are amazing, i from Brazil and you helped me a lot's of thank so much for that

@AnkitDahal-dr1jq 6 месяцев назад

brother how did you get the exact cloud point in meshlab??i didn't get those ..is it another senor causing error or is it the code of electronoobs ?

@parnilsson8283 5 лет назад

Absolutely brilliant. Thanks for sharing!

@chiparooo 6 лет назад

Nice job on the hardware. Would be nice to have a little more accuracy on the scan. Thanks for sharing!

@christosvolikakis1523 2 года назад

I love this project and I have subscribed to your channel. I would definitely become a Patreon subscriber if you had some sort of classes. It would be great to do this with a group of people once everyone has their supplies. I’m still new to 3-D printing and have to learn how to print the supplies for this project.

@mohamedtechnology5105 3 года назад

I was wondering can I use an ultrasonic sensor instead of the IR one?

@harys6382 6 лет назад

wooow bro😮 awesome

@D4no00 5 лет назад

2 smooth rods seem an overkill, 1 will do just fine. To improve the quality you should try microstepping to see if that helps.

@yvantartakovsky 6 лет назад

I love the banana as a scale, classic!

@MrFatjonable 6 лет назад

Use microstepping for stepper motor drivers Those A4988, they do support microstepping Try that and maybe you’ll get better resolution!

@ELECTRONOOBS 6 лет назад

I've tried. The error is in the sensor. Sombody told me to place tape over the sensor and make a small hole. That will give better results...

@binsun3081 6 лет назад

Great work. Have you considered Time of Flight (TOF) distance sensor such as Adafruit VL53L0X or VL6180X?

@CristovamDias Год назад

@@ELECTRONOOBS Acredito que a resolução do sensor associada aos micropassos (microstepping) do motor poderão melhorar muito o resultado. Resolver somente um dos casos será somente meia solução e não será satisfatório.

@ptitbenable 3 года назад

Sorry for my english, I'm french... 😅 this is a wonderfull project, si toi can have more precision, and spending more time 😅 using gears...

@arzamotovlog8015 Год назад

hello first of all. I have to ask, do we need to combine the step and activating connections in the motor of the z axis? if it is not needed, the z axis does not move in this regard. As the second point, I completed the connections completely as you mentioned, but it starts to work automatically when power is supplied. The d2 connection and the 5 v connection seem to be ineffective. How can we solve this? My third problem is that the sensor performs the scan, but the resulting model is very different from the real thing. I would be grateful if you help.

@Ani__watch Год назад

As you said like in the video I do aal connection and get a code but in this coddition z axis didn't move a single step

@WaltonPete 6 лет назад

Very clever idea!

@kartikhaigune1559 3 года назад

Thank you sir for explaining .. me and friends are trying to make a 3d scanner as our college project ...is there any way I can get a block daigram of it .. Help .. Thanks again

@ankitdahal9727 6 месяцев назад

Have you done this ?

@nolimits4923 6 лет назад

GREAT JOB

@gabrielestevezfernandez6014 6 лет назад

Great Tutorial

@santosvella 6 лет назад

Maybe check out ToF (Time of Flight) laser sensors. They might give you better resolution.

@robertmonroe9728 2 года назад

For that TOF system need to be used

@deathshaker0026 6 лет назад

I wonder if you use a sensor array and upscale the x,y. How things would turn out.

@priyankadeshpande6618 7 месяцев назад

can i use a LASER or LIDAR sensor in place of IR sensor for better accuracy?

@PhG1961 6 лет назад

Awesome !!

@electronic7979 6 лет назад

Excellent

@faceprofesor 2 года назад

Thanks for the video. Is there any sensor with a resolution of at least 1 mm? Thank you...

@user-mq4bv6hv5e 2 года назад

how did you find this data or where are they:: distance = -5.40274*pow(distance,3)+28.4823*pow(distance,2)-49.7115*distance+31.3444; //From datashee t

@CrAzYDr1veR 6 лет назад

hi what do you think about the xbox kinect for 3d scanning?

@anitajangra706 6 лет назад

Nice project

@meronbiemnet5069 2 года назад

Hi Electronoobs, I have tried this project by using the same equipments and coding as well but when I rendered the point clouds to the meshlab software, it is showing half scanned part only, I dont know why. What is your suggestion on this problem? Thanks

@aab8741 2 года назад

whats app my friend, i have the same problem and i watched a lot of videos and i think the solution is to use matlab code, if you got it right in other way i would appreciate the help. thanks:)

@enfieldadventure3114 Год назад

Same problem

@ankitdahal9727 6 месяцев назад

@@aab8741can you please explain thisbrother?

@ankitdahal9727 6 месяцев назад

@@aab8741hello brother please help me..please give your number

@narinoguerra7656 6 лет назад

Excellent Bro, Thanks For Share...

@rengarajan2099 6 лет назад

Bro please explain arduino with fingerprint device tutorial

@spokescoffeeroaster5201 5 лет назад

I've noticed that some of the tutorials that came with my arduino do not actually work. I instead had to find an online tutorial where I could confirm that the circuit diagram they were showing me matched up with their working circuit in real life via the pictures they provided.

@farooqpatel6773 6 лет назад

Great job sir

@krishnawa_ 6 лет назад

Wonderful project😍😍😍

@dantreco 6 лет назад

Hola qué tal una pregunta se podría mandar la información directamente a la pc sin la necesidad de la SD ?

@SpandanNagarkar23 18 дней назад

Can we use unipolar stepper motor

@darzahidzahid4967 6 лет назад

Great! Sir plc make a video about ferrite transformers thank u

@maddogmarkrestorations9255 5 месяцев назад

What voltage is the47uf capacitor? Please and thank you

@VikasHacker 7 месяцев назад

Hello sir loveeee the video 😍 .... But there is a question can I you this model of ir sensor GP2Y0A21YK0F ... Please telll

@nesar93 6 лет назад

Nice project! ;)

@krishnawa_ 6 лет назад

Wonderful project 😊😊😊😍😍

@maheshpatel2005 Год назад

Nice one

@ajithsundar6034 6 лет назад

Hi Can you know how connect or control the camera by using arduino............

@tharunv1885 6 лет назад

Thnks bro Plse continue the drone videos

@ahmedhasnain5457 6 лет назад

I like the video but watch later 👌

@galibrahman5589 5 лет назад

How did you close the bottom part of the 3D model with Blender?

@tropcm 6 лет назад

Make 3d lidar it would be interesting

@nxvasix8696 6 лет назад

If you use a TMC2130 you will get better quality right?

@PrasadAher-lm1lb Год назад

If I used IR sensor HW-201 then what problem I face..?? plz reply

@user-xj8gx2ch9c 4 года назад

Hello, Electronoobs! I'm very glad to see your video about 3D scanner and I decided to repeat this project. So, I assembled 3D scanner, launched, tested, but in result of scanning i had scan with half of the circle point cloud on 180°, moreover another half of circle is empty(without point cloud). It is very strange, so as it should be generate point cloud on 360°(completely) ! Do you have some idea about solving of this problem, Electronoobs?

@gpittule6166 4 года назад

Does it work Did you use his code Do code work properly Plz tell me coz I have to make it too

@user-xj8gx2ch9c 4 года назад

@@gpittule6166 I had already decided this problem, don't worry. Just need to change formula of convert degrees to radians.

@gpittule6166 4 года назад

After the change of formula will it work I want to do it for my project activity

@maissarjaibia6823 2 года назад

HI please how did you resolved the problem please help me

@ankitdahal9727 6 месяцев назад

Hello did you solve it

@The123dannyd 2 года назад

What happens if it’s not perfectly centred

@MartinRobol 6 лет назад

hoa, ¿como se puede comprar a placa armada para enchufar el arduino nano? y descargar los st para imprimir las otras partes?

@MohamedSayed-sf2js 4 года назад

What if i use another sharp ir sensor that have distance 10 to 80 cm

@labibahalmirayudhistira4202 2 года назад

what kind of sensor which has most precision?

@vishalsingh-yf9es 6 лет назад

Can we use ultrasonic sensor (HC-SRO4)?????

@zorojuro5428 Год назад

i tried this but it's not working can you please help me

@Almusabbir 4 года назад

I have done everything exactly the way you described. But the point cloud file generates a very different structure in meshlab. There is no similarity between real object scanned and the generated meshlab structure. What is the problem ?

@ankitdahal9727 6 месяцев назад

Have you corrected this?

@bhargavpavan3153 5 лет назад

There is no movement for z-axis please help fast

@aab8741 2 года назад

What did you do to fix it?

@mancio92M 6 лет назад

beautiful

@krushna_hinge8905 5 лет назад

Please Make 3 phase moter control using gsm module

@tinnguyen8032 5 лет назад

how many rated voltage step motor

@Hu._.k Год назад

Inused all the same components and the same coding but it didn't work. It do nothing, only the arduino just flashing redights

@electronicsguy9899 6 лет назад

It's my first order on jlcpcb but it is showing shipping charges the dimensions are lower than 100mm why

@Nono-hk3is 6 лет назад

Did you change any of the default settings for the PCB? If there's a change to almost any of those values, the special pricing and free shipping become unavailable.

@iobotics Год назад

What is with the banana? 🙈

@MiniTony0502 Год назад

can i use arduino nano shield v4 instead

@indianplans 6 лет назад

Hi. Very nice video. Please give me idea if I have to measure more than 5 km. 5 kilo meters is necessary for my project

@indianplans 6 лет назад

Richard Benson brother. 5 km means. 5 kilometres far. I want to measure objects which are 5 kilometers distant

@indianplans 6 лет назад

Richard Benson for civil engineering survey project

@indianplans 6 лет назад

Richard Benson Thank you Brother

@althuelectronics5158 6 лет назад

wery naise your wariking ant seting am happy to waching this video

@ossamaelabbady 3 года назад

i need help i am implementing your 3d scanner for a project and i am using the IR infrared sensor 10-80 cm and the output is not correct .

@user-om5ox4yd9q 3 месяца назад

What doing?

@fahadahmed480 6 лет назад

hey whats your qualifications is

@evavision3276 7 месяцев назад

Hello. I used the limit switch code in your 3D scanner topic in my hobby project. However, GP2Y0A51SK0F(2-15cm) sharp sensor is used in your project. In my project, GP2Y0A41SK0F(4-30cm) sharp sensor is used. I will change the relevant code in your code, but I could not find the distance formula for my GP2Y0A41SK0F sensor. Can you please tell me the formula to add to the code?

@mehididjamel4391 3 месяца назад

you can find it in the datacheet

@mukilan574 5 лет назад

How you give base for the model

@lugiswandy1390 2 года назад

How to get this 3d scanner? Can u help me?

@mahabubrahman4826 6 лет назад

Can u make a video of making Arduino 3d printer

@abdosaidi8760 2 года назад

I want to get one how can I

@enfieldadventure3114 Год назад

My scanner is scanning only in front part and that to half only,what error could case this,can anyone help to sort this

@kawaiipotato3346 5 месяцев назад

im having the same issue have you found a solution?

@tharunv1885 6 лет назад

Bro make a 3d printer like this using arduino

@TC59977 5 лет назад

Hello everyone we created this system to scan objects according to this video.But we have a problem related to Meshlab.When we throw file throught sd card into Meshlab we observed half of scanned object.What is the reason of this situation? How we can gain full scanned object ? I am waiting your ideas related to this issue... Thank you for interest :)

@ankitdahal9727 6 месяцев назад

Did it solve now ?😊

@TC59977 6 месяцев назад

@@ankitdahal9727 I wasn't solve.

@jyotishmanbharali3757 6 лет назад

These videos already exists. I wish you could make a proper tutorial on how to make a micromouse

@nolimits4923 6 лет назад

Puedes decirme solo una cosa que estoy construyendo controlador de vuelo que has hecho en un video antiguo> simplemente conecta el sensor acc y gero (mpu6050). Desea conectar el sensor barométrico para que las conexiones sean así?> SENSOR BAROMÉTRICO: GND TO GND VCC A 5V da TO A4 CL A A5 ** ESTO ES CORRECTO O NO, POR FAVOR DEBE RESPONDER ** CONEXIONES MPU6050: VCC A 5V GND TO GND SCL A A5 SDA A A4 POR FAVOR DEBE RESPONDER

@ELECTRONOOBS 6 лет назад

ALL IN ONE TECH so, Los pines Dr i2c son los mismos siempre, scl A5 y el sda A4

@nolimits4923 6 лет назад

wow tío recibí respuesta de ti estoy tan feliz> muchas gracias hombre

@nolimits4923 6 лет назад

¿Podemos conectar un módulo gps y bluetooth o wifi en él? si es así, ¿cuáles son los pines de eso? gracias chico genial (advence)