Arduino based SCADA with CX Supervisor

Подписаться 639

Просмотров 14 тыс.

50% 1

Arduino based SCADA with CX Supervisor
This is a step by step tutorial video for developing and implementing a project for controlling a DC Motor from PC based SCADA interface using Arduino UNO micro controller and SCADA software CX Supervisor. Running the motor in forward/reverse direction, indicating motor speed (rpm/rps), increasing or decreasing the speed of motor all these operations are made in SCADA interface.
The main aim is to show technique for how a Arduino UNO can be interfaced with SCADA software via Arduino OPC Server to develop Arduino based SCADA project.
Equipment & Software List:
1. Arduino UNO micro controller
2. IR obstacle sensor
3. Motor driver L298N
4. 12 V DC Motor
5. Capacitor 100 PF
6. Arduino IDE software
7. Arduino OPC Server software
8. SCADA Software: CX Supervisor
Download Link:
Arduno Code: drive.google.com/file/d/1HhZC...
Arduino OPC Server: www.st4makers.com
CX Supervisor (Trial version): industrial.omron.eu/en/produc...
Music: www.bensound.com

Наука

Опубликовано:

26 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@user-dp1pr3hj7h 3 года назад

Thank you for the good data. Thanks to you, I learned a lot.^^

@TechTutorial20 3 года назад

Thanks a lot

@viliamewaqairatu9385 3 года назад

Thanks Bro ... its a really nice project... really learnt a lot :)

@TechTutorial20 3 года назад

Thanks a lot

@ekoharyanto5487 2 года назад

Thank's you a lot

@TechTutorial20 2 года назад

Thank you so much

@nikhilyedaskar5249 3 года назад

Could you help me in my project I need to make interfacing between Arduino and wonderware intouch scada using kepserver or u can upload one video on it.

@TechTutorial20 3 года назад

Thanks..I will try to upload a video on this topic in the next

@ponchoferney 3 года назад

Hi, I would like to know if I can use ESP8266 device for make a Scada and monitoring some sensors like current, voltage, temperature with that software.(This is from Omron, isn't it?)

@TechTutorial20 3 года назад

Yes, you can use ESP8266 device for scada by using modbus tcp/ip or modbus rtu protocol. For that you have to upload modbus sketch on ESP8266 device and use a scada software that supports modbus protocol.

@ponchoferney 3 года назад

@@TechTutorial20 Thanks, I'm going to try to do for those methods.

@nikhilyedaskar5249 3 года назад

I checked all the connection. In dopc explore I get output but from Arduino pin no 8 & pin no 9 I did get output , only pin 12 gives output . Is any changes in Arduino program or u have any other program for it pls send me because I take this project as my final year project

@TechTutorial20 3 года назад

Please specify your problem. Send your screenshot for arduino sketch you created, screenshot of configuration for arduino opc server.

@nikhilyedaskar5249 3 года назад

Hii I did this project as shown in video but my project not working properly so what can I do..

@TechTutorial20 3 года назад

please make sure 'opc core components redistributable' is installed on your pc. If this is not install, install that on your pc. You can find information about that on this video studio.ru-vid.com05ab7X9Ytuc/analytics/tab-overview/period-default

@fatimaimdary9212 2 года назад

@@TechTutorial20 Hey the same for me, when i check Info in opc for arduino nothing is writed

@TechTutorial20 2 года назад

@@fatimaimdary9212 Could you please send me the screenshot of the problem you sre facing.

@fatimaimdary9212 2 года назад

@@TechTutorial20 i already tried but it can't be sent here, when you open the "Info" tab in OPC , you said: here we can see a message that said OPC is waiting for the client. For me i can't see this message

@fatimaimdary9212 2 года назад

@@TechTutorial20 I sent you details in your mail inbox and Facebook, you can check them there. Thanks