Arduino Car Parking System 

I made rfid based automated parking system, replaced ir sensors with ultrasonic sensors(since ir sensors don't work under sunlight), adding a fire detection system in the parking area, added a number plate detection system and stored them on a database.(excel),uploaded the real time parking data (i.e which slot is empty , for how many hours is the slot booked, etc.) (IoT based) I represented this project in state science exhibition and was ranked 2nd .

Hey everyone, I'm not sure if anyone is still following this project or looking to get it up and running, but I have tried and would like to share some updates that could be helpful. 1. The code for the LCD Scanner is working. 2. The code of Car Parking system: + The LCD may show nothing or display an error message with lcd(begin). To fix this, you can try replacing "lcd(begin)" with "lcd.init()". + Please note that the car or item must cross through both IR1 and IR2 sensors at the same time. If you try to activate only one of the sensors, the system will not work properly.

Very very nice video bro!!👌👌 Nice and clean setup,nice presentation👌👌

I love this set up....but is the servo adjustable to slow the motion, and would be Kool to add a buzzer for sound.

✔✔😎✔✔ Cool!.. Thanks for sharing...👍

Great project👏👏👏

This is good effort. Realistically there should be some restrictions while entering in parking such as card scan or enter a code to enter for only authorised vehicles. Exiting is ok without any restriction. Hope this feature may be added to make this a realistic model.

Great video!!

You doing your job great. Keep it up

Super very helpful video

I appreciate you bro you are the hero iam from kerala iam like this type of invention But some board price decreses my happiness. Iam like you bro.if there is any Sponsers available.

Sir can you start a new series for only coding Arduino please 🙏 I am in first year in college. So it help easy to understand code.

Materials:- Arduino UNO IR Proximity Sensor Servo Motor 16x2 LCD i2c Display Jumpers

Nice work dude

I will just need one of your videos which explains the steps to follow as slowly as possible so as not to damage my Arduino

nice work and would be interesting if also could do submarine full video, code circuit diagram, and also fully automated supported traffic light system, full automated home automation system by Bluetooth and wifi. for now well done

Nice project man you are very creative. I am trying to arduino coding and i know its hard. Good luck for other videos!

Very nice video bhai 👌

Awesome Bro

Excellent!

I love ur project boss

U r so talented

Very well video👍🏼👍🏼 Congratulations for gaining +1 subscriber. 😃😃

Great ♥

good project. congrat.

Nice project

Bro , very well work . But when a person or an animal will try to go to the other side of the road , the proximity sensor may detect it and it will open the barrier . For this issue , you can use cameras and program the Arduino as when the proximity sensor detects an object , the camera will be on and see wether it is a car or a person . If car then it will open the barrier and if person then it will not open the barrier

Good job💪💪

Hi, this video was very good...Can you try making an autonomous car using raspberry pi

How do you get for the IR sensor to only have one working at a time? Like when a car enters, only the left IR sensor works, not the right one despite the car also passing it.

Nice Bhai🔥

Hi Bro, i'm follow the exactly like ur code, y the servo only turn CW in continous. its dont have turn CCW to close the barrier.

Cool stuff

Amazing!!

I want to redo this parking lot with 2 gates, entry and exit. I want to make it possible for enter or exit can be from any gate. I still want the counter to increment up and down correctly.

Keep posting more brother .... your videos are really helpful

heya! its a great project to go with !!! can u tell me what is the use of flag 1 and flag 2

this man is god of arduino hats off

Nice Demo

what do you use for the wiring diagram?

it is better to blink red led if parking slot is not there green if parking slot if available. and buzzer for if any vehicle came at the in 0 parking slot.

Good project, I think it's good idea to add remote control device so only some people can enter the parking.

Nice !

Super bro

Sir can we use the same code and circuitry on raspberry pi pico? Will it work the same?

If IN or OUT second sensor detect the vehicle is in or out then the parking barrier gate will open and closed. Or you set any time for parking barrier gate closed.

imagine a scenario : - there are 4 parking slots slot 1 and slot 3 is filled , a car arrived and slot 2 is assigned to it ,a second car arrived and since slot 2 is already assigned ,the only remaining slot 4 is assigned to second car . now 1st car instead of parking in assigned slot 2 it goes to slot 4.the second car since the slot allotted is slot 4 moves towards that slot but it finds that slot 4 is filled by first car. how can we overcome such scenarios with our parking system.

Very very supper bro I'm your big fan I'm sachin 7th i like robotic

congratulations bro for macbook or imac👍🏻👍🏻

Nice! Do you have a link to this little "power / signal distribution board"? What happens if a car decide to turn back?

Display screen is not working

sir, I would appreciate those efforts if you can show me any project that related to force sensor. Thank you very much

Bro, what do you call that addition uno port that is connected to the board??

What kind of device that you input in the 5v and 3.3v or maybe a small breadboard I don't no what the called in the black box

Hi. Im from indonesia. it is good to know that the AI is running. can we talk more about this? we are looking for vendors here which can support the AI solution especially parking lot (capture and parking)

Hi great video! I just started with Arduino and could you direct me how to use this project with a breadboard instead of the black mini board? thanks so much appreciate.

nice working

sir hello what do you call that small cube that you are putting small wires in it the black small cubes sir? hoping for your fast reply

awesome

hi viral science how about with timer every parking lot when the car go inside and its start counting then when the car leave the time stop.

amazing

The function lcd.display() is not available in the library given.

Hey Can you help us to know how did you do circuit diagram on laptop

Can we use antenna with esp8266 board as we use with esp32 cam board Please make a video on how to do it.

We have made this project we uploaded the code but lcd isn't displaing anything neither the servo motor is working.. Plzz reply

What program did you do the wire diagram in

bro a small issue i faced in your code. since you not mentioned about lcd.begin() so for 16x2 we need to use lcd.begin(16,2); also in void loop, you missed lcd.init(); line before lcd.begin();. these are the error i faced while i run code. thanks for your valueable content

you can add ultrasonic sensor in every parking and when the car gets closer to the ultrasonic a red led blow

sir, using same coding, can we use motor in CD room PC ? ,please answer me..its important sir

Nice

Hi I want to do this one on my project so please can you help me to explain more

Can I use sg 90 s servo? Please Reply me

Thanks for given information programme code tell me detailed which app bro

Please make a tutorial on tft touch screen LCD

Can we use display module without i2c module and is there need of battery

Where have you kept the battery?

Shuper

What is the name of the small piece that you connected it to the wires you didn’t mention it’s name if you can tell me I will be thankful

Good

Good day, why I cannot find that code in the database (LCD16*2_12C_Scanner)

I have a problem where the car slots go straight from 3 to 0 in the beginning and then it just opens and closes without me even coming near the IR

waiting for the iot version of this project ...please i need help

good

Please make a video on how to connect the components to the breadboard

Doing a check to see if the vehicle has actually left the car park by checking if the second IR sensor has been triggered would be cool :)

How to take lcd with i2c interface in tinkercad , because it's showing only lcd . Icd with i2c is not in tinkercad

Sir please make a gesture control car because my science exhibition is coming

I did this project but I upload the lcd scaner code and the main the error #include is error how to find the error

Good work

hi sir..what kind simulator software that you use? proteus or what? please answer me..its important for me

Nice job man i just wanna ask where did u the simulation in part 1:36

Wow

bro can you help me out it dosent show the text on display, the program works without errors and everything else works perfectly

did u use breadboard, what was that small thing? what do we call that?

What do flag1 and flag2 do and why do you need them?

Can u replaced ir sensor by 4 channel infrared obstacle!!!

We can add which particular spot is vacant so that a person parking the car have not to search for vacant spot and doing such unnecessary traffic can be overcomed

Good day, why I cannot find that code in the database (Car Parking Sensor)

Bro i am working on Distance measurement using ultrasonic senor, 16×2 lcd, i2c module , breadbord, Can you please help me in coding.

And is there a possibility that it can count how much time car is parked in it