How to make car parking system using arduino | Automatic car parking system | Arduino Project 

How much this product sir, I will buy this product sir

I will buy instant only sir

Join telegram we will discuss about this project.

@@SimpleCircuitsOfficial number send me sir

I am waiting for your results.

Would you like to share your Instagram or any source where I can talk to you about this project??

Do we need to install i2c library or anything along with the given code ????? Or just follow all and only these steps which are instructed in this video! Cuz the comments are confusing me because many people complaining that it's not working etc

@@SoulVerses54 you may want to install some libraries if doesn't done earlier. when you click the verify button there will show if any libraries are missing, then you can solve it by downloading the wanted one. if you want any guide how to download you can copy paste the given error message to RU-vid and you can refer someone's video who solved the same problem.. I think you got it... have a nice day

@@SimpleCircuitsOfficial Thank you man... I got the second prize with a hard work of just few minutes.... thanks a lot... keep going I would like to continue with some more projects

Join telegram group. I will elaborate this in the group easily.

Telegram grubunuzun adı nedir

Simple circuits "link in description"

​Car parking system

USB Cable for Arduino UNO/MEGA 2560 | USB-A to USB-B

Install the library

Libraries install kerni hai.

​@@SimpleCircuitsOfficial Kaise krenge sir

@bishtvlogs1980 watch the tutorials on yt.

Yes

@@SimpleCircuitsOfficialis there a way you could tell me the wiring for the ultrasonic sensor? And how many do we need 2 or 1 and for the display you have I have a square little OLED display can I use that instead of the big one your using?

I haven't use that I have used the Amazon to buy because that is reliable and easy to return.

Thanks sir 👍🏻

Yes

Adjust potential meter of sensor according to your range and check the range by keeping your hand in front of sensor.

Colour of led doesn't matters. Adjust your sensors from potential meter.

May be that's why it is not working or it is stable power supply issue.

Bro you're not responding to me there please provide proper source where i can come over to my theories. Instagram or telegram account!

Yes

Not now

Also the ir sensor 1 only updates till 3

Give 12v to arduino

@@SimpleCircuitsOfficial how can i do that??

@@SimpleCircuitsOfficial can you please refer a youtube link

Give 12v power supply to arduino and then try it's so easy.

Adjust the potential meter on the back of the lcd. Blue colour.

Please reply 🙏

Please tell your question correctly

App ki code me jo lcd me 4 solt show kar ta tha me usko 6 kardu to us code me koi problem hoga kya

then the text didn't appear on lcd, it shows only its light?

@clang000 adjust the potential meter on the back of lcd.

@@SimpleCircuitsOfficial thank you so much, it's working now! ❤️

Yes, but code will change

Install the library

Materials required link in description.

also which arduino

@talhazeeshan7473 uno

@@SimpleCircuitsOfficial thanks very much i will try this tommorow and also we have to connect all the hardware mentioned in the video and then download the code right, and then its done right?

@@SimpleCircuitsOfficial also help me when i need it as it will cost me 3200.54inr from where i am thanks

Yes

Iske working ki pdf mil skti h

I recommend you to buy from the link in description as they are according to project. Otherwise as your wish you can buy from anywhere.

Thank you.

Thank you mannnnnnn

May be it is not triggering...

Adjust potential meter on the back of lcd.

@@SimpleCircuitsOfficial thank you sir

Sir I tried turn the potentiometer clockwise but the sceen is still not working 😢

Yes

How much volt battery

You can attach upto 12v battery.

May be

Thanks

Any

It is on i2c module blue color.

@@SimpleCircuitsOfficialIt looks there there is a space for a small screw driver , should I turn it ??

@advaitkamthekar2596 yes

Okay i got the display to turn. But im facing another issue with the code. Is there any way I can share you a video to show what the problem is

@advaitkamthekar2596 join telegram

Buddy you have to install the libraries in your arduino desktop to run the code.

???????

@@SimpleCircuitsOfficial I am asking that is that necessary to use a database for storing the availability of each parking slot ?

What do you want to do tell me that first. This will help me to understand your question.

Show me error image through telegram.

Pls reply

You can use any. It will work.

Join telegram group I will solve this problem

No battery used, direct connection from laptop. But you can use battery.

Can i use mobile instead of a laptop? ​@@SimpleCircuitsOfficial

Yes

Join telegram and show me the image of problem.

@@SimpleCircuitsOfficial what is your telegram? I'd like to ask some questions

Add liquidcrystal_i2c

bro what about code?? it's really working

Ya that's why he sad project is working.

@@rameshkishore7893 #include #include LiquidCrystal_I2C lcd(0x27,16,2); #include Servo myservo; int IR1 = 2; int IR2 = 3; int Slot = 4; //Total number of parking Slots int flag1 = 0; int flag2 = 0; void setup() { Serial.begin(9600); lcd.init(); //initialize the lcd lcd.backlight(); //open the backlight pinMode(IR1, INPUT); pinMode(IR2, INPUT); myservo.attach(4); myservo.write(100); lcd.setCursor (0,0); lcd.print(" ARDUINO "); lcd.setCursor (0,1); lcd.print(" PARKING SYSTEM "); delay (2000); lcd.clear(); } void loop(){ if(digitalRead (IR1) == LOW && flag1==0){ if(Slot>0){flag1=1; if(flag2==0){myservo.write(0); Slot = Slot-1;} }else{ lcd.setCursor (0,0); lcd.print(" SORRY :( "); lcd.setCursor (0,1); lcd.print(" Parking Full "); delay (3000); lcd.clear(); } } if(digitalRead (IR2) == LOW && flag2==0){flag2=1; if(flag1==0){myservo.write(0); Slot = Slot+1;} } if(flag1==1 && flag2==1){ delay (1000); myservo.write(100); flag1=0, flag2=0; } lcd.setCursor (0,0); lcd.print(" WELCOME! "); lcd.setCursor (0,1); lcd.print("Slot Left: "); lcd.print(Slot); }

@@rameshkishore7893 #include #include LiquidCrystal_I2C lcd(0x27,16,2); #include Servo myservo; int IR1 = 2; int IR2 = 3; int Slot = 4; //Total number of parking Slots int flag1 = 0; int flag2 = 0; void setup() { Serial.begin(9600); lcd.init(); //initialize the lcd lcd.backlight(); //open the backlight pinMode(IR1, INPUT); pinMode(IR2, INPUT); myservo.attach(4); myservo.write(100); lcd.setCursor (0,0); lcd.print(" ARDUINO "); lcd.setCursor (0,1); lcd.print(" PARKING SYSTEM "); delay (2000); lcd.clear(); } void loop(){ if(digitalRead (IR1) == LOW && flag1==0){ if(Slot>0){flag1=1; if(flag2==0){myservo.write(0); Slot = Slot-1;} }else{ lcd.setCursor (0,0); lcd.print(" SORRY :( "); lcd.setCursor (0,1); lcd.print(" Parking Full "); delay (3000); lcd.clear(); } } if(digitalRead (IR2) == LOW && flag2==0){flag2=1; if(flag1==0){myservo.write(0); Slot = Slot+1;} } if(flag1==1 && flag2==1){ delay (1000); myservo.write(100); flag1=0, flag2=0; } lcd.setCursor (0,0); lcd.print(" WELCOME! "); lcd.setCursor (0,1); lcd.print("Slot Left: "); lcd.print(Slot); }

No, it's not iot. This project based on arduino.

@@SimpleCircuitsOfficial do you have video using IOT ?

No

Yes, from laptop

Make it from empty pen.

@@SimpleCircuitsOfficial bro my servo motor is not working. is it the code or my servo?

Your servo problem, use stable current.

@@SimpleCircuitsOfficial my servo is brand new am using exactly like yours

You can show your problem video through telegram, link in description.

Only one code is there.

@@SimpleCircuitsOfficial Arduino code 1,2 and 3 what does it mean, it writes in that way...

See description carefully or come on telegram I will give there

​@@SimpleCircuitsOfficial I can't found the link to your telegram chanel

At the below of description.

Why not!

​@@SimpleCircuitsOfficial When

Not now

@@SimpleCircuitsOfficial😅😅😅😅

All connections are same. The only thing you need to do is change the board when you upload the program. If you have any doubts you can join telegram group.

It can't run without battery.

1000 rs

LCD display potential meter adjustment needed.

Currency?😀

Sorry but we don't have block diagram. You can contact us through telegram if needed urgent.

Yes

Matchbox

There is only one code. I have pinned the code in comment.

@@SimpleCircuitsOfficial Ok

?

Ya sure

​@@SimpleCircuitsOfficialcan we buy ur project sir?

Yes

What

No

Install the library.

Where ?

From arduino only

What library name sir

LiquidCrystal_I2C

Join telegram group I will solve this problem.

​@@SimpleCircuitsOfficialTelegram group in which name??

Simple Circuits

Hey can we use ultrasonic sensors too?

@Darknight-yf1rk yes

Thank you

Yes you can join telegram group for more help.

Reset arduino and then try

Good management

What

Ask this to Tinkercad company 😄

Join telegram

​@@SimpleCircuitsOfficialThere is a problem in a code😢

Very good

Ya you can do it. Your school will appreciate your work.

Join telegram group

Hmmm..

@@SimpleCircuitsOfficial Report link send me bro

@@SimpleCircuitsOfficial Bro report copy Link send me bro

Kindly help me plz

What's the issue

After uploading code my system is not working

Nethir lcd not ir sensor is working

Join telegram for more help

May be it is faulty

Faultyy mannnnn

Join telegram group I will solve this issue

​@@SimpleCircuitsOfficial Ap idhr bta dyen please telegram nahi install

It's in description

In description

Error or display problem?

Thank you

Join telegram group I will solve this problem

Mine to

You have to change your connections and code for this but I don't have that code and diagram. I suggest you to buy a I2C module.

Thanks

It's in description

​@@SimpleCircuitsOfficial Please can you tell me code kidhr implement kryen gye means konsi app pr??

Arduino ide

Thank you

Join telegram group, link in description I will help you there.

It's in description

Join telegram group I will solve this problem

Description

Join telegram group I will solve this problem.

Join telegram group I will solve this.