Arduino drone - Part3 Drone built

Подписаться 586 тыс.

Просмотров 131 тыс.

50% 1

First of all sorry for my "ESC" word accent. LOL
Full Arduino based drone. The tutorial is divided in a few parts. In this video I build drone using all the parts from the other two videos. You can find all the codes, schematics, examples below. If you want more, wait for next videos where I show you how the PID words and how to create our own code for the flight controller.
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.co...
Canal en Español: / electronoobs en español
Part 1: • Arduino drone - Part1 ...
Part 2: • Arduino drone - Part2 ...
-----------------LINKS-------------------
STL original source: www.thingivers...
Drone build webpage: www.electronoob...
STL files: www.electronoob...
Flight controller webpage: www.electronoob...
Transmitter/receiver webpage: www.electronoob...
Full tutorial webpage: www.electronoob...
Price/Part list webpage: www.electronoob...
------From previous videos------
NRF24 library: www.electronoob...
Multiwii downlaod: www.electronoob...
Part list (photos): www.electronoob...
www.electronoob...
PID tutorial: www.electronoob...
---------------MATERIAL---------------
LIPO battery: www.ebay.com/it...
ESC 12A: www.ebay.com/it...
1804 brushless motor: www.ebay.com/it...
5030 propellers: www.ebay.com/it...
LIPO connectors: www.ebay.com/it...
Slide switch: www.ebay.com/it...
Flight controller: DIY
Radio receiver/transmitter: DIY
Drone body: DIY : www.electronoob...
Or : www.ebay.com/it...
---------------SCHEMATICS-----------
ESC calibrate: www.electronoob...
Lipo connection: www.electronoob...
Propeller spin direction: www.electronoob...
--------------------CODE------------------
ESC calibrate: www.electronoob...
------From previous videos------
Transmitter code: www.electronoob...
Receiver code: www.electronoob...
Receiver test: www.electronoob...
Multiwii: www.electronoob...
Like share and subscribe to motivate me. Thank you

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 273

@Begin421603 3 года назад

I have been working in aviation design engineering for the past 16 years. Wanted to get my hands dirty with these flying bots as hobby. Your tutorial helped me immensely. My quadcopter took first controlled flight today following your videos. Keep inspiring. Hats off for this knowledge sharing...

@andrewkasza7282 7 лет назад

I had tried to build a Arduino controlled quad a couple years ago, and I just got a 3d printer and I found your videos on this build. This will help allot in finally finishing this project. Thanks.

@peterwoo2489 7 лет назад

As a miniquad pilot, the weight is not actually that bad. I challenge you to add some FPV (wireless video system) components to your quad and maybe look at high-end motors and ESCs :)

@anandkachale5187 7 лет назад

u really would have worked hard for this project. I honestly never expected anyone to build a drone like this. I was hoping a lot from someone which turned out to be u. Thanks a lot. Keep it up. Nice explanations. Good luck

@michabaszczak3667 4 года назад

The best drone project with explanation I've seen so far! Thank you ;)

@sirk5792 5 лет назад

awesome i've made it to this point, i can now control motor speed from my remote controller. all that is left is to actually fly my drone somewhere. keep it up!

@rajatpathak5944 4 года назад

did you use ppm

@bhargavdayal8595 3 года назад

@@rajatpathak5944 hey..I used ppm and it doesn't seem to work..

@browaruspierogus2182 6 лет назад

There are very professional and cheap flight controllers with speed controllers and IMUs. Problem is the algorithms eliminating sensor reading errors and proper flight stability. You need quite a calc power and fast mcu to achieve reasonable flight effect. Those algorithms are really sophisticated.

@madaboutpuppets 4 года назад

Great tutorial. Am looking at building up parts and trying this, fully scratch built. You say if you don't have a 3d printer for STL files, there are alternatives in description (and you show A4 printouts on the video), but the only alternatives I can find on your site are details of possibly using wood plastic or metal, but none match this design. Do you have printouts available?

@shutdahellup69420 6 лет назад

Excellent project but isn't the response time slow it dosent spin motor quickly enough when the throttle is pumped up

@ReckItRob 7 лет назад

I've ordered my parts and can't wait to start this (the body is already printed). :-) Would you consider expanding this project to be GPS guided, and possibly adding FPV? Great project, keep it up

@ELECTRONOOBS 7 лет назад

The FPV is separated from the Arduino part. Depends on your gear. The GPS works but I haven't tested it yet. Using Multiwii you have multiple choices. I think there are other videos about it. I'm not sure when I'll be able to make a video about that since I'm working already on other projects... Thanks and keep up!

@ReckItRob 7 лет назад

How about a onboard camera that records, with heads up display data? I saw this Minim OSD on aliexpress and wondered if it could be incorporated into a onboard camera to record the flight. :-)

@paucliment9280 7 лет назад

The components you chose makes me feel like back in 2015. Cool build tho

@ELECTRONOOBS 7 лет назад

The idea is to make it cheap and based on only arduino! Thank you!

@paucliment9280 7 лет назад

ELECTRONOOBS ur welcome. I really like the idea of using arduino

@muhammadumaraadil1463 7 лет назад

ELECTRONOOBS Please give me your whatsapp number

@paucliment9280 7 лет назад

MUHAMMAD UMAR AADIL just a weird question right there haha

@ELECTRONOOBS 7 лет назад

Here is my mail: info@electronoobs.com Don't share my number any more, been hacked 2 times already!

@coolaqua1 7 лет назад

First of all, great job! Very informative video and i wanted to build my own Arduino based Tx/Rx and Flight controller and this video came as a real help. Thank you. I have built everything except the frame. RF Transmitter and Receiver work fine. Flight controller works fine. But when i connect everything (meaning connect D2, GND of Receiver to D2, GND of Flight controller), motors don't respond to the joystick movements. This is what i have observed: 1. Tested Rx with Rx test code and all joystick value prints correspond to the transmitted values. they change when joysticks are moved. 2. Calibrated the ESCs as described and found that the minimum value is 1200us and changed the same in multiwii config file. 3. Even the java GUI shows joystick values correctly when i change the joysticks, but motors don't spin! 4. I probed the PWM outputs of flight controller Arduino, they are at constant 500Hz, 50% duty cycle. They absolutely don't respond to any joystick changes. Any suggestions of where i should be looking further? Many thanks!

@ELECTRONOOBS 7 лет назад

Have you activated the motors with throttle 0 and roll maximum for 3 seconds 7:00 ? Also are you sure that all the motros have the samw PWM range. Usually is 1000us to 2000us. Maybe you should reset the range for all the ESCs, it will take just 5 minutes. Use this tutorial for that: www.electronoobs.com/eng_robotica_tut5_1.php There you will find the calibration code. Keep up!

@coolaqua1 7 лет назад

Appreciate your quick response. I will try your suggestions.

@rajatpathak5944 4 года назад

@@coolaqua1 sir did your drone started working after trying the maker's suggestions

@kedarprabhudessai 7 лет назад

hi thank you buddy i watched all the videos of this build it awesome. good explanation buddy :) on you tube i had seen many quad videos but never had such great detailed explanation. thank you for these videos.

@kannadakaka 3 года назад

Sir please give the clarification regarding when you switch on the drone. a music tone is coming. You don't install any buzzer to flight control board .. then where that sound is coming. I think you instal commercially available flight control to that drone.

@joseejncreations47 10 месяцев назад

Hi guys i need help!so when i rauch the multiwiiconf. When i select the port com and it connects very well but when i press the start button the whole program just dies and says nothing'if you can help me.Thanks you so much

@Mecikelctronics 4 месяца назад

Are you using nano?..if yes put a 10 k ohm resistance to last 6 holes of nano and it will work just fine

@ThornStarR98x_blackheart 3 года назад

Huge fan of you brother.. It would be more cool if you have added the roll axis control too... Expecting a short video on that too..

@corneal35 6 лет назад

IS it possible to use any receiver to connect to my drone instead of using the one created in the video?

@nelsondarwinpaktech3954 4 года назад

Brother....I made the communication done, the drone is also responding to the multiwii but the motors are not turning. Although i checked the battery, voltages, ESC's with servo.h library....

@arnie8958 6 лет назад

trust me, this guy is a legend!!

@rengarider 6 лет назад

superb, can i use 2200kv motor and 7040 properller for this model??? please reply....

@shakerchanduuttam 5 лет назад

Great Project and Good Going...!!! I am a beginner for DIY drone... Can we use Micro Coreless motors in this project and connect the motors directly to Arduino Flight controller...without using ESC..? Thank You.

@shoaibakhtar2484 5 лет назад

no you have to use brushless motor for this. If you want to make a coreless drone then check out this videos:- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZKINPm3P9E.html

@usman12520 7 лет назад

Awesome video! Gonna try to make a drone like this too

@daddybou8567 2 месяца назад

Great project. Please i'm trying to build this drone but the receiver and the flight controller can't connect? Can you help me please

@arifqurbanov2159 2 года назад

sir im also makeing this project. i made transmiter $ resiver and tested it with given code. its works like a charm. whenever i change the code to actual reciver, connect ppm output to the ppm input of flight controller and run the application. i couldnt get any data from transmitter you have any idea please share with me that would be really appreciable. Thank you!

@ryandavid3835 7 лет назад

Hey man, that's awesome(i'm brazillian, sorry for my english...hue). I Wanna try to Build this drone here, but I have problems to find some things, like the bruhsless motor and the ESC. Did You make an eletronics course, or anything?

@ELECTRONOOBS 7 лет назад

You can't use eBay there? And yes, I'm an electronic engineer!

@NiCadHeliPilot 7 лет назад

Check out HobbyKing. They have plenty of RC gear over there.

@Rohit-oz1or 4 года назад

Thanks for the great project using commonly available components and making this "expensive" hobby accessible to all. I just wanted to know what are the performance trade offs in using 8 bit Arduino as compared to: 1. A 32 bit microcontroller like stm32 2. A cc3d 3. A naze32 4. Naza In addition, what are the performance trade offs in using nrf24 based transmitter and receiver as compared to say, a ct6b or i6? Thanks!!

@vedantnarayan61 7 лет назад

Thanks for the suggestion.

@AlSTORIES777 9 месяцев назад

Can you make this project using brushed motors sir... Thanks

@tonycyber 6 лет назад

Hi Electronoobs, I am going to use this receiver Flysky FS-iA6 2.4G 6 Channel Remote Control Receiver, which receiver pins would need to be connected to the Arduino nano.... I know that one is for signal and one is for power ...

@vovanikotin 7 лет назад

For pitch/roll calculation are you use quaternions? Or just atan() function?

@Lunarspear2023 3 года назад

Hello, I'm trying to build a drone but i am totally new to motors and esc, i have no proper training and I dont know how to choose them, is there any tips you can give a beginner like me about this part? My drone has around 1.6-2kg weight and most of the brushless motors i see on the market are for 4'' drones. How would one find out about the thrust weight ratio of a brushless motor?

@boulhamid 2 года назад

hi , thank you very much for this project, but why do we use two arduino? we cannot use a single arduino that we connect the nrf24 directly to it, because the number of ports is sufficient ???

@jhapluyt6833 6 лет назад

awesome tutorials...helped me a lot.......thanks..

@varunsontakke9810 7 лет назад

Will you make a tutorial video in which mini coreless motor is run using Arduino PWM pins

@trevorscott3275 2 года назад

Wouldn't the switch burn off from all that current being drawn?

@vigneshvs8923 7 лет назад

waited for this video a long time:-)

@vedantnarayan61 7 лет назад

Your idea is great. I will make this drone.

@peterwoo2489 7 лет назад

Great if learning how all components in a quad works! You may want to look at other Betaflight based miniquads (or race quads) as the MultiWii platform is not currently being developed and it is old technology. Look at current miniquad build videos if you're aiming for performance :)

@ELECTRONOOBS 7 лет назад

Yes, the idea is to make this project all based on arduino. So I don't know any other platform that works on Arduino than multiwii. But yes, multiwii is quite old. That's why in future videos I'll make my own code, crude but it will help people to learn about PID and gyro data, etc... Keep up!

@mbojondai7086 7 лет назад

Amazingn video series.. Thankyou very much. i'll make my first own.

@نشوانالظاهر-م9ف 2 года назад

How are you sir...Can you use the ADXL345 you want the MPU6050 because I don't have the MPU6050 and thank you

@GreatHacker1 5 месяцев назад

Hello bro. I was able to upload the scatch into arduino nano, but when I open the MultiWiiConfig, select the port and hit start it closes the app and generate and file error output. Do you have any idea what this might be?

@mustaqueahmed599 6 лет назад

I have shown all 3 part of this video . I am so much confused about PPM & PWM . I want to understand the code separately Please help me.

@walterjuandedios4726 6 лет назад

could help me to deactivate the // to what is necessary so that cuadrocopter works with the flysky i6, the command has ppm.

@t41ef46 2 года назад

I followed every step of each video twice. But it still is not working for me. The software shows the controller is working but the motor doesnt respond. Sometimes, I just get random fluctuating behavior from the motor. Any advice is highly appreciated!

@dcaquatics4680 4 года назад

Hi i would just like to know wher the arduino uno and reciever is getting there power from as the battery supply is 11.1v and arduino is 5v ??

@varunsontakke9810 7 лет назад

We love your tutorial

@pankajpatil9459 6 лет назад

Why do u used two nano in the drone .is it possible to mount the imu and nrf module on single nano by decreasing the no.of channels

@prashantmishra2179 5 лет назад

A very great project... thanks a lot.. but i am using a 4 channel.. so i am unable to arm the quadcopter in order to fly it.. i am stuck. please help..

@9kraby9 7 лет назад

Cool series! Just one question, to which Flight control pin do you connect the PPM pin for the receiver?

@ELECTRONOOBS 7 лет назад

From the reciver digital pin D2 to the flight controller digital pin D2. And also share gnd.

@harrylenon9594 7 лет назад

it doesnt matter what order the wires for the motor go to the esc, the middle wire doesnt have to go to the middle :)

@ELECTRONOOBS 7 лет назад

no, you're right. but because later you would have to swap two wires to change the spin direction (if not the desired one) in my case it is easier for me to explain how if I just fix a middle wire. Keep up and thank you!

@vishnu62147 7 лет назад

Is any problem while using atmega 328p ic directley on the pcb board for flight controller ? there is any change to the code.?

@ELECTRONOOBS 7 лет назад

Vishnu Sadhu no, the code should be the same. Make sure you make all the connection right and upload the code with an FTDI module...

@vishalk6778 7 лет назад

Hi Electronoobs! I am working on this but I was not having radio controller(old transmitter)..so i decided to make a desktop application for transmitter in visual c# and made some development in tx arduino code. The transmitter work fine with multiwii everything throttle yaw pitch roll works on ...but when I try to start the drone by making throttle min and roll max the drone doesn't start.....please help

@ajayjoshi_aj 6 лет назад

Can i use the bluetooth module for not using the transmitter and receiver but Now leave the connectivity issues because if it would possible then it will be asset for me and can u suggest me about this soon

@panthdhillon8284 10 месяцев назад

Bro instead of using two Nanos can we use only one stm32??

@techadonmaster 4 года назад

My 1400 kV Bldc motor doesn't work when i Connect to receiver but it receiver and flight work in multiwii software....

@flamingnar1015 7 лет назад

What is the total cost for this whole project? Including parts for part 1, part 2 and part 3.

@tonycyber 7 лет назад

If a Radio Controller comes with a compatible receiver will it still work with this project and also if it does work will there be less things to do???

@ELECTRONOOBS 7 лет назад

Mavrick yes, any PWM receiver will work with multuwii. But you have to connect all the receiver channels and don't add the ppm_sum line in the code.

@tonycyber 7 лет назад

thanks, my team and I will start to follow your videos, what are some of the problems that I will encounter throughout this project

@jovanni2343 3 года назад

I set the throttle to minimum and roll to maximum, but the motors still do not start. I can see in multiwii conf that the receiver and transmitter does work, and is sending the correct values but the motors still don't start. Any advice?

@sarvjitpatil19 7 лет назад

Can we combine code for both receiver and flight controller to use only on arduini. Please tell me how to do this Thanks By the way nice work done👍

@ELECTRONOOBS 7 лет назад

Yes, but I don't have a video for that. Try this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bxlJckevIEk.html

@sarvjitpatil19 7 лет назад

Electronoobs thanks for replying. Ill try this

@CarlosFilmagem2008 7 лет назад

excelente vídeo parabéns!!!!!!

@danielradulescu7474 6 лет назад

Can you please make a video where you explain de code from the flight controller?

@aeroflow3680 4 месяца назад

could we use one arduino uno for receiver and flight controller instead of two ?

@omsingharjit 6 лет назад

you first said you gonna use dc brush motors ?????

@fazafadli7291 6 лет назад

hello sir, i have question, i build this one, but why my motor cant run maximum? my quad cant fly,the motor is not strong enough to fly. why? thx

@aamir0801 4 года назад

just one question why use 2 aduino one for receiver and one for FC. Can't this be done by just one?

@sumithsawkar6190 2 года назад

Bro you are really awesome..

@virenwadhel3934 5 лет назад

Hi.. I'm also building the quadcopter using arduino nano but the tx n rx which I'm using is fsia6 and when i configure the multiwii software same as on the video duration of 6:18 apprx and when I'm turning on the tx there is no chnge on the throttle,yaw,pitch n roll.. how i can resolv that.. please help asap

@1ilango1 4 года назад

Dear Sir, none of the links to parts on eBay works anymore. Could you update them ?

@kennytran2860 4 года назад

You can just search them on amazon

@ahmedallam9612 4 года назад

Great work, thanks for sharing

@jkthegreat3298 5 лет назад

brother can you help me how to use bluetooth module or my own wifi module instead of the other part you attached in the last which is radio reciever something

@saliksheraz6236 6 лет назад

Nice work

@jackyb695 Год назад

Very good clips, but, I have a problem I did everything as described in Arduino Drone video clips, but the electrical motors don't spin 1. I followed the instruction and uploaded the Arduino program 2. The calibration of the ECS motors was ok and each of the 4 motors spin within the rang of 1000 to 2000 3. The simulation with the multiwii run every very good and I see that the RC is working 4. I used an oscilloscope to check the signal from the remote to the Arduino and it works 5. I used an oscilloscope to check the signal to the ESC and I see that there is a clear signal of the 4 channels Can someone help, what I’m missing here ?

@BEAULAPINKYB Год назад

hi sir, i have completed all the setup. But my drone is not lifting.Can you please help me joystick control for lifting the drone. Also my drone size is 450cm , used bldc 2212 motor with simonk30A ESC . Issue1: after reducing throttle and yaw to higher, only 1 motor is running, when i increase the throtle, others are running. Issue2: Not lifting Please help me here

@harshdhanawade Год назад

Can you solve this problem?

@chethanp6150 3 года назад

can't we use single Arduino for both receiver and flight computer

@gabrieldelacruz1630 4 года назад

For programming need pc or possible a cellphone for programming plsss answer

@tonycyber 7 лет назад

will a ESC with 30A or 40A still be good for this project.

@ELECTRONOOBS 7 лет назад

Yes!

@akashsaha6437 4 года назад

Sir , my ESC's won't calibrating , using the given code. I can't understand what's the problem is?? Please suggest me a solution.

@Begin421603 3 года назад

You calibrate your ESC's one by one. I used potentiometer as input device. Follow the steps as below: 1. Connect Arduino nano with Analog input (say A0 pin) from potentiometer. 2. Connect the output put (say Pin 8) to the ESC 3. Switch Potentiometer to Max Value 4. Connect Power to the ESC (Electronic speed controller) 5. You will hear Beap. 6. Immediately take the potentiometer to Min value 7. Again you will hear the beap 8. ESC is calibrated now 9. Repeat for all the motors independently. Hope this helps. I learned really hard way :)

@mahmedgalal8747 5 лет назад

Primero, muchas gracias. En segundo lugar, hay algunas preguntas que me gustaría hacer

@surandsangeet5677 3 года назад

Did you use 2s battery?

@rengarider 6 лет назад

In java processing platform it is working ,but we I connect lipo I heard a beep sound from esc but when I increase the throttle the motor are not working,what will be the problem ????

@ELECTRONOOBS 6 лет назад

You have to activate the motors. 3 seconds with throttle and yaw to minimum if I remember well

@rengarider 6 лет назад

Thank u

@rajatpathak5944 4 года назад

@@rengarider did your drone started working.i faced the same problem

@rengarider 4 года назад

@@rajatpathak5944 yes it worked

@naveenramu5875 4 года назад

@@ELECTRONOOBS I did it but i can't activate the motors,reply as soon as possible

@shlokghadekar6281 5 лет назад

I am having a lot of problems with the ppm signal. The receiver is receiving the signal but the controller is not. Plz, help !

@rajatpathak5944 4 года назад

i made all the connections as shown in the videos.when i throttled up the motors spin for a moment then stopped.since then i am not able to throttle up the motors using the controller

@LaMin-ri6eg 11 месяцев назад

Please describe codes as able to copy. I can't open your file(downloaded) in my arduino IDE.

@b.s.3193 7 лет назад

hı thnx for perfect project. ı want to build a rc car ı have every equipment but ı dont know how to write arduino l298n control codes ll you help me ?

@b.s.3193 7 лет назад

ı have; 2×arduino uno or arduino nano, 1×tower pro servo motor, 1×dc brushed motor, 2×NRF24L01+ radio, 1×l298n motor driver, 2× joystick board and all of usefull equipment but ı dont know how to write control codes for arduino.

@ELECTRONOOBS 7 лет назад

for the l298n H bridge you just have to send PWM signals. Check this video of mine of the RC tank: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f3NJcaniAjs.html Keep up!

@vishal01mehra 7 лет назад

I want to ask something. was that receiver response lag or video sound lag?

@ELECTRONOOBS 7 лет назад

It has no lag. Maybe video sound I don't know. But the radio has no lag.

@vishal01mehra 7 лет назад

ELECTRONOOBS Thanks!

@lucasfalcon4079 7 лет назад

But, what happens when the Lipo battery runs out? Does it crash or do you get warned some how?

@ELECTRONOOBS 7 лет назад

Lucas Jacobsson in the way the drone is in the video it would slowly go down as the battery gets empty. but the multiwii has a battery check pin. you have to add a voltage divider and connect it to that pin and the multiwii will know the real voltage.

@dineshgarg9370 4 года назад

Can't we 1 arduino mega instead of 2 arduino nano 1 for flight controller and 1 for reciever

@jcreyes427 3 года назад

7:01 what is the delay from the controller to the motors?

@abhinavverma9576 6 лет назад

Can we use dc motor with motor driver instead of brushless motor

@ManojSharma-uz4wc 7 лет назад

Is it possible to use only one arduino on the drone part if I don't use the M6050 module?

@ELECTRONOOBS 7 лет назад

You can't fly a drone without a inertial movement unit! it's imposible! You need the MPU6050 or any other IMU.

@dragan136 7 лет назад

great thanks you for excellent videos

@mr.karthiklegend306 2 года назад

Bro we can use DC 180 motor without ESC for drone . Yes,.???🤔🤔

@theflamecoreguy7929 2 года назад

@vishal01mehra 7 лет назад

And one more thing,can I use this tx and rx with with my ardupilot flight controller?

@ELECTRONOOBS 7 лет назад

what rx tx?

@vishal01mehra 7 лет назад

ELECTRONOOBS-Those transmitter and receiver that you had made.

@ELECTRONOOBS 7 лет назад

Oh, I tought you were talking about some Rx and Tx pins. LOL. Yes you could use it if your flight controller has PPM input.

@vishal01mehra 7 лет назад

ELECTRONOOBS-thanks. love your videos.😊

@vishnu62147 7 лет назад

We can use arduino uno to upload code to atmega 328p ic without using FTDI module there is any problem?

@ELECTRONOOBS 7 лет назад

Vishnu Sadhu no problem, you can do that as well. Keep up!

@vishal01mehra 7 лет назад

Great job!!!

@vedantnarayan61 7 лет назад

Yes you are right.

@user-xp6hq7sc8w 3 года назад

muito bom,,tem como usar um transmissor diferente no arduino nrf

@ksmith7122 6 лет назад

Very nice project :)

@ELECTRONOOBS 6 лет назад

Thanks!

@adwxith_ 6 лет назад

Hi can u tell me which are the pins for magnetometer,barometer and GPS sensor

@ELECTRONOOBS 6 лет назад

All those module haev i2c. Connect data and clock to A4 and A5. Keep up!

@pankajsaroha9574 6 лет назад

is it necessary to calibrate the escs??

@rabiranjanray7224 6 лет назад

sir,the calibration of my ESC is not functioning in proper way the speed of the motor automatically decreases when the value goes avobe1500.I'm helpless pls do reply to my problem 's solution soon as i have been stucked in the middle of my project and i have spent much on buying the motors and escs, pls reply to my problem by a solution sir....