Are Graphics Cards Repairable ? 

If you need a repair, please contact me using a link in the description.

It’s great to watch someone work that really knows what they are doing. I predict this channel will get a lot larger. Keep up the awesome content. 👍

you fixing gpu's restored my faith that skilled people still exist !

Wow! This is amazing. You deserve more subs. I have a 980 ti which has a short on it, I don't have the proper equipment to fix it, but seeing videos like this really makes me wish I did. Subbed!

Found your channel by chance and really liked it, I've been following/learning electronics repair and I liked your way of explaining it. Keep it up!

You have an in-depth knowledge of these boards and it is amazing to watch your work.

You mentioned in one of your videos that this is not your full time job. You should probably think of switching careers and making this your full time job. You are amazing at this, and you're doing great service to the community also being a massive proponent towards right to repair. God bless you, keep up the great work 👍

love the unique content man, I hope this shows people that it is possible to fix a broken gpu at home.

I hope Linus finds you and gives much needed exposure. Watching your videos is insanely awesome

Fantastic job and great film work!

I am amazed at the quality of the videos and how in-depth you go on the repairs. It is really entertaining to watch. We definitely need an LTT video with you as a guest, lets hope Linus sees your videos so it can actually happen. Great job keep up the good work!!!!

I bought a graphic card which was mined (It was a Radeon RX Vega 64) I think i'm gonna try and repair it one more time because of this channel alone. Hopefully this goes well.

Bro just don't stop uploading new content man. Your videos are amazing !

Excellent work man. In a future video, could you go over the various liquids you apply during your repairs? I know a lot of rubbing alcohol is being used for cleaning, but for the other liquids, I can never tell if it's flux or conductive glue and would really like to know.

Found this channel today. I must say this channel is awesome!

I dig the background music. I like zoning out to it watching your repairs.

You sir are going to smash your subscriber count with light speed and it's no surprise. Keep it going and can't wait to see more.

love your videos, keep up

Subscribed. Binged everything, this channel will be big man keep up!

Love the relaxing music. This channel is going places. Amazing production quality

For the algo.... more people need to see how a professional turns E-waste into a working renewed component.

These board repair videos make it look so easy. Like anyone with a heat gun and some flux could do it

I'm just amazed on your many skills (yes, I checked your other 2 channels). I just wonder why you're not monetizing this one, I've heard RU-vid sucks now in that matter. Anyway thanks for this channel, somehow I find It therapeutic.

One more win for the team!

Awesomely done! Gratz 👏👏👏

Your skills are amazing. Although I am not a technician. I enjoy watching the vcards after you repaired it. I am hoping you will be able to fix some updated cards (RTX or RX) Especially those mining rtx cards. Cheers

Amazing work. And professional. Keep it up, you are making a huge difference

Hey, just found your channel by chance. Who makes the best quality cards in your opinion next to EVGA (doesn´t matter if Nvidia or AMD chip)? I am currently in the process of gathering the funds to build a new PC. I used to like MSI and my current card has worked without problems for the last 3 years, but with more recent information, I might stay away from the brand for a while.

Excellent! Much respect for what you do!

Now that EVGA is exiting the GPU manufacturing game, who do you think is second best? And do you think EVGA has been consistent quality-wise in the last 3 generations?

really enjoying the content, keep it up

You have super steady hands!!

Great video!! Not sure why I'm so interested but I am haha. Great skills and workmanship 💯

a part of me wishes to learn this magical craft of yours. It must feel nice and gratifying to bring dead cards back to life.

Good stuff man

New sub I’m digging your content.keep up the great work.

You could make a video on what brands / builds are reliable. I guess people would love to hear that from you. With your experience

Damn pumping up contents! Keep it up!

You are a great technician I'm glad I found your channel!!

Amazing work! Lovely videos.

Subscribed and joined the discord. Great work NWR, I appreciate the videos. I'm debating if I should have an older graphics (GTX650 Ti boost 2GB) card repaired. It has served me well for many years but recently took a dump causing me to upgrade to a moderately better card. Still, it would be nice to have a backup card handy in case that happens to me again. Thanks again for the videos.

Now that EVGA is out of the game for nVidia GPUs, what would be your personal opinion as "the best", if not "the least awful" GPU partner?

nice music,nice voice for the nice day,thanks.

Hi do you ever sell any of the GPU you fix? I'm enjoying your videos great job.

high quality repair job

cool stuff dude

Awesome video. More like this video.

Love these videos.

Awesome channel and great content.

Great video, very entertaining even for someone who has zero knowledge about these stuff. What do you think about newer generation like rtx 20 and 30 series? does evga still maintain their quality or if any other aib is getting better?. Also curious about on amd side if they got evga like quality.

I love your videos. I am learning so much. Thankyou.

Great work!

I want to work with u and learning from u but unfortunately u from USA thanks for ur content 👌👌

Nice job 👍👍

Dude DO MORE :D

I love your videos, you are making great content! I have a question, you said that STRIX cards are actually pretty bad but you only showed the 1000 cards. Are the rtx 3000 STRIX cards also as bad as you say or are they doing a better job? And now that EVGA is done with GPUs what are our options?

Good Job. Ive had old gpu, well i can say i cooked it, beacuse i havent deep cleaned it and it looked yellowish from the inside. Its nice to see that its acualy repairable. Even tho not consistently i guess. Now i have 1060 3gb. Ill be upgrading soon, i dont really know what to do with it guess ill sell it, or give it to cousin.

Bro your videos are AWESOME! I'm watchmaker, and i LOVE your work, very similar. Focus, detect and correct the problem. I have 1 old 980Ti, with the "famous" problem of R172 & R174. Only a bit toasted, not burned or exploded. I never do anything with Electronic micosoldering but, after see you, i'm thinking give a try to Repair that old GPU. Can you give me some "novel tips"? And sorry 4 the bad english, not muy native language :)

WoW. Impressive tech skills.!🙋

schematics and such very helpful

I love these videos keep it up please

Thank you

Hard repair...well done!!!

really enjoy your videos, could you please make a video on how you made the riser card and power metre shown at 9:15

can you make a video about which GPU brands you recommend? That EVGA vid was really good to actually acknowledge why they made superior GPUs and ASUS, Gigabyte and MSI are very questionable

What percentage you think is your success rate on fixes? Unbelivable videos , best iw seen yet.

you are absolutely amazing

great job, son!

The card whisperer 😊

Great job :)

so i know your a big fan of evga and now that there pulling out of the GPU game who would you say is the 2nd closest brand to them when it comes to gpu quality

Hi Greeting from India. Very good videos. Make video on tools you are using. Can you tell how to made power meter tool for testing GPU?

great video! but tbh i´m pretty interested on that thermal grease accessory for application. Where i can get one? hope you see this and great videos!

Have you ever worked on the Nvidia reference GPU's? Was just wondering about your opinion on them since I'm looking to get a new card soon, and EVGA won't be in the GPU market anymore.

How did you learn to solder like that? is great work :)

With the announcement of evga no longer making gpus, what brands would you recommend moving forward?

Wow. That's some good work. What do you do with these cards after you repair them?

Never had a single broken card in my life. If you take care of them cleaning them and using within factory values, they lasts decades

great videos

This is comparable to watches repairement guy, or even more

what can you say about EVGA now🤔

Awesome ✌🏻✌🏻✌🏻

Not worried about popping caps when re moving the drmos?

Hey man can you fix my msi lightning r9 290x good card don't want to throw it away it needs capacitors and the lower power phase is dead

Are there any rankings about which vendors and gpu manufacturers is less problematic?

I have no clue what you're doing but I've watched all of your videos so when the video starts I say "Ok check your resistances. Good voltages? Useless ass backplates! Check the data lines. Oh, memory test looks good. Try a Furmark. Video game engines run well."

do you ever ultrasonic-clean your boards?...they are gunky AF

Base from you've said replacing parts from donor board means not every GPU can be repaired, is that right?

Hello, very good videos from gigabyte and asus, could you review the input sapphire pulse cards?

What about the Bus Interface showing PCIe x 16 2.0? Shouldn't it be 3.0? at 11:33

Sorry for my ignorance, but does every company like evga or msi etc have to develop their own board or do they get it ready from nvidia/amd and they just develop the cooling etc??

Hi Tonny, I like to know which Brand/Model Campact Thermal Camera you were using in this video? It looks like Seek brand but it looks something different. I you don't mind, tell me it info for me. Thank you.

Sir please do some pc motherboard. Thanks

Hello there. Can you tell me what program do you use to test the vram of the graphic card, I have an mxm GTX 1070 with white lines that keep crashing and I suspect is because some vram is failing.

How do you know what the resistances should be?

where do you buy these replacement things like mosfets, memory ships and others things..?

3:10 The part right beside cracks due to heat?

im just wondering... how would a card be classes as a no fix? is it just too expensive to buy all the components or just not possible to buy.

May I know if this kind of extensive gpu repair worth it? I mean if you based it to the cost of repair on old gpu and then sell it, will it be profitable?

i am saddened because i have a gtqphics card and not a graphics cardr so i cant fix it :(