Тёмный
No video :(

ARE KIRBY VACUUMS WORTH THE MONEY: KIRBY G4 1994 Vs KIRBY G4 1995 

Kirby Enthusiast
Подписаться 11 тыс.
Просмотров 2,7 тыс.
50% 1

ARE KIRBY VACUUMS WORTH THE MONEY: KIRBY G4 1994 Vs KIRBY G4 1995
/ discord
LINKS:
(some of the links below may be affiliate links)
Merchandise teespring.com/...
Music www.epidemicso...
Kirby USA Bumper G4 amzn.to/3lHklsE
Kirby USA Kirby Generation Series Transmission Drive Belt, amzn.to/3n1VtMq
Kirby USA Kirby Generation Series Complete Transmission amzn.to/3pcl7QG
Kirby USA Bearing Plate amzn.to/38S9OXP
Kirby Wheels amzn.to/3pDrz33
Kirby UK Transmission Complete amzn.to/3pCvoWr
Kirby UK Brushroll G3 amzn.to/2IM4WJh
Kirby UK Kirby Transmission Primary Drive Belt amzn.to/36hktso
Kirby UK Kirby Bearing Plate amzn.to/36KZwGr
Kirby UK G3 Bumper amzn.to/3kA6aUU
Krby UK Wheels amzn.to/3kGOJC6
DISCLAIMER: Links included in this description may be affiliate links.
If you purchase a product or service with the links that i provide, i may receive a small commission. There is no additional charge to you!
I appreciate the support for my channel so i can continue to provide you with free content.
In this Kirby vacuum demonstration i will be showing comparisons of the Kirby G4 1994 700w Vs the Kirby G4 635w.
Discusing Why Kirby dropped the power of the Kirby G4 from 700w to 635w changes from1994 to 1995. Did the Kirby Company drop the ball by making this change.
From demonstrating the Kirby G3 in 1992 to using a hand sweeper for 3 years until i had saved up for my Kirby G4 to buy one new.
The Kirby G3 was the pivotal turning point for the Kirby vacuum company investing millions in the redevelopment. Beginning in 1990, the "Generation" or "G" series ushered in a new platform for the cleaner. The addition of TechDrive variable power assist eliminated 90% of the effort required to move the unit back and forth
In a earlier video i demonstrated how easy it is to service your Kirby Generation or Kirby avalir transmission. To keep it running smooth for years to come or to get it back to running as smooth as it did the day it came off Kirby assembly line.
Welcome to the Kirby Enthusiast Channel, this is the only dedicated Kirby Owners channel on you tube.
Dedicated to sharing knowledge that will save you time and money and help you get the most out of your Kirby Vacuum.
This is the place for all your Kirby Vacuum demonstrations.
On this channel do Kirby vacuum demonstrations , from demonstrating how to take apart your Kirby vacuum and clean to as good as the day it came out of the Kirby vacuum company factory.
How to shampoo demonstrations, money saving tips.
Whether you've had a Kirby vacuum demonstration and bought your new Kirby vacuum in 2020.
Or if you have owned your Kirby vacuum for years or bought a 2nd hand Kirby vacuum off your local marketplace.
You know in my opinion own the best vacuum of 2020.
The question are Kirby vacuums worth it or are Kirby vacuums worth the money, will be answered.
Whether you are a new Kirby owner or have owned an Kirby Avalir 2 from new.
As you Know the Kirby Vacuums has been sold door to door for over 100 yrs by the Kirby company.
The best way to see all the benefits of a Kirby avalir 2 or other Kirby vacuums is in a Kirby vacuum demonstration.
The Kirby home cleaning system is 2nd to none and cant be bought new in stores across the UK or Europe . So the only way to see the benefits of owning such a great and successful home care system is in your own home by watching a Kirby vacuum demonstration from a door to door salesmen.
The purpose of my channel is to share all the Kirby vacuum tips and tricks.
Demonstrating the deep cleaning power of the Kirby Avalir 2 and other Kirby Vacuum right back to the Kirby Legend 2 or the Kirby Heritage 2.
The Kirby Avalir 2 isn't just and upright vacuum.
It is in my opinion the best vacuum cleaner of 2020 and beyond.
The Kirby Avalir 2 is capable of deep cleaning mattress with the Kirby deep cleaning portable.
This will show you how to deep clean your mattress and how to remove dust mites and bed bugs from your bed and home for good.
The Kirby home-care system is a complete home care system that comes with the following.
The Kirby Portable shampoo system that you can use to clean your curtains and dry clean your couch.
Saving you money on new furnishing in your home over many years.
The best Kirby vacuum accessory in my opinion in 2020 is the new Kirby shampoo system.
The Kirby shampoo system has come on leaps and bounds over the years with the Kirby company improvements with each Kirby Vacuum .
It now has a Kirby hard floor mop system that can mop your wooden or tiled floors.
It had a Kirby tile and grout cleaning system, bring those tiled floors and grout looking new again.
#kirbyenthusiast #kirbyavalir #kirbyhardfloorsystem #kirbybeltlifter #kirbylegends #kirbylegend2 #kirbyvacuum #kirbytransmission #kirbytechdrive

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@D.Pensak
@D.Pensak 3 года назад
Every bit of Kirby knowledge helps...was unaware of this difference. Keep up the great work KE!
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Thanks, there are quite a few people out there that didn't know about this change Kirby did. I'm investigating deeper into this
@busaj383
@busaj383 3 года назад
Good to know, looks like I have a G5 I purchased 20 some years from a door to door person while still married... I got the Kirby in the divorce 😎
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Nice to see you got the Kirby 👍👍
@ronaldstrik
@ronaldstrik 3 года назад
My first Kirby was the G4 635 Wtt. Changed it for the Avalir 2. Sentria 1 went to my youngest. I didn’t know that the G4 motor was downgraded.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Thanks for continued support , it’s quite surprising how many owners were not aware of this Kirby downgrade
@Thedonsmoney25823
@Thedonsmoney25823 Год назад
The rolls Royce of vacuums
@duanehovenga2965
@duanehovenga2965 3 года назад
That is quite the difference. Great video. Officially fan of early g4
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Same here my favorite Kirby of all. Like i said i was lucky i bought this new when i did. Thankyou for continued support 👌👌
@paulsargeson3368
@paulsargeson3368 3 года назад
Thank you for replying.changed belt when problem started.seems to loose power when head is dropped to carpet.have swapped an old G4 roller and found it works fine just no green light ( magnets wrong end )
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Either your brush roll was worn out or you may have put brushroll back in on wrong setting . Remember there are only 3 settings. The fourth is not a setting . I normally start with number 3 then turn back to 2 then 1. Less confusing with the notches then . If you put straight edge across like I do in my video , brushes should only stick past rug plate 3mm or 1/8th of inch . Also make sure you lower until tone changes then only 1 more click down . If you go fully down then it will bury in carpet and burn belt Hope this helps A
@nick2203
@nick2203 3 года назад
Just finished a refurb of my 1995 635 watt UK spec G4, new fan fitted etc. I’ve no idea of what kind of cfm it’s producing but certainly has a lot of airflow. I also have a 1200 watt Numatic Henry vacuum. Recently fitted a new bag in the Henry so I thought I’d fit the zipp brush on the Henry just for comparison to the G4. The Henry has good airflow but the zipp brush spun considerably faster when connected to the G4.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Should get around 120 cfm from the 635watt G4
@FFWrench
@FFWrench 4 месяца назад
Is there any good wiki on the Kirby models? We bought a new G4 in 1995-1996 here in the US. Needing parts I picked up a few more over the years. We use an Ultimate G Diamond Edition now. My wife feels the G4 was still better. The Ultimate G has a 840w motor here. 130v @ 7a. Any thoughts on emptors to improve airflow? Or is it worth dropping the $ on a new current generation Kirby in 2024?
@KirbyEnthusiast
@KirbyEnthusiast 4 месяца назад
I did find that with the ultimate G , here is a video I made and the improvements I made to my ultimate g. Also there are link in description to my Kirby shop on Amazon to parts you will need ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nUa0G5NGt4M.htmlsi=UQ7ky7ipLmkDKwOv
@azizkhorsheed7564
@azizkhorsheed7564 2 года назад
i don't know why my g4 sed it was from september 1995 but it has a 700w motor
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
Must have carried the 700w on in other countries to use up old stock compared to Australia and UK
@andrewc9235
@andrewc9235 3 года назад
Could it have anything to do with noise regulations? The '95 sounded quieter. Would be interesting to find out what Amps/Watts the American equivalent kirbys are.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Noise regulations in Uk weren’t that stringent back then not to sure about Europe. I’ll do a noise test to see if decibels are different 👍👍
@joesphkucera6847
@joesphkucera6847 3 года назад
I just put up an American version G3D
@CaptianNamco
@CaptianNamco Год назад
I have four g4s one is from 1995 and Three is from 1994
@jonathonrossebo1783
@jonathonrossebo1783 11 месяцев назад
I was wondering, are all the Kirbies sold outside the continent of North America 240 volt machines? If no, what other countries/continents use 120 volt machines? I noticed the 2 you tested were labeled as 240 volt. Where in the world are you located if you don't mind me asking? I'm in the United States. Have you ever had a North American version of a Kirby? If so, what model(s)? I really enjoy the content you post on RU-vid by the way.
@KirbyEnthusiast
@KirbyEnthusiast 11 месяцев назад
240v is all of Europe , Uk and Australia
@KirbyEnthusiast
@KirbyEnthusiast 11 месяцев назад
Thankyou really appreciate awesome comment and support of my free content. 👍👍
@joesphkucera6847
@joesphkucera6847 3 года назад
Interesting my G3D in the USA. doesn’t LIST watts just amps and it says 7amps I converted to watts which equals 840 WATTS what does that mean ?
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
That means it’s 840 watts , so if you look at a later model that will be significantly less power
@joefuzz6385
@joefuzz6385 Год назад
@@KirbyEnthusiast Hi! Been a long time subscriber and I have to ask... should I shop around for. G3D like this person mentioned seeing as how I have all hard wood floors and tiles in the bathroom and kitchen? I’m imagining 840 watts is perfect suction? I also have a chihuahua who sheds ALOT. Any clarification would be appreciated LOVE your channel sir 😎👍🏽👍🏽
@VINTAGELIKE
@VINTAGELIKE 7 месяцев назад
2nd one sounds off
@robertgwisdala5795
@robertgwisdala5795 3 года назад
Thank you for doing this video! I appreciate it! Can the United Kingdom 🇬🇧 Kirby’s be used in Australia 🇦🇺 and can the Australia Kirby’s be used in United Kingdom? I am curious.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Yes they can same voltage 240v
@paulsargeson3368
@paulsargeson3368 3 года назад
Hi bought a sentria 2 worked great for a few weeks but suddenly started the burning belt smell and flickering green light and different sound when lowered,nothing has been altered ie brush height.any ideas ?
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Belt needs changing then double check the height of brushroll
@brdllc
@brdllc 2 года назад
I just looked and my US spec is a model G4D and it says “120V ~ 50/60hz 7A” Is that the 700w version then cuz of the 50/60hz?
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
Sounds about right . 👍🛎
@brdllc
@brdllc 2 года назад
@@KirbyEnthusiast awesome! I’m gonna do the upgrades you’ve done and make it a beast. Mine is in very rough dirty condition, gonna take some love that’s for sure
@Curtis488
@Curtis488 3 года назад
The g4 was a total nightmare for me along with my old g3 both needed refurbish but couldn't afford it so I threw them away now I regret it I see myself as a total dumbass.🙄
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
We all make mistakes I traded in my original Ultimate G. Before moving to Australia
@kylebartkowiak1332
@kylebartkowiak1332 2 года назад
Not really a huge difference
Далее
PEDRO PEDRO INSIDEOUT
00:10
Просмотров 3,1 млн
Девочки, у вас тоже так? 💅🏻✨
00:17
Refurbished Kirby G4 Airflow And Suction Tests
8:31
Просмотров 1,8 тыс.
History of Central Vacuum Control Circuits
19:05
Просмотров 3,2 тыс.