No video :(

Are you about to buy a honey extractor? What's out there and what's the difference?

Подписаться 148 тыс.

Просмотров 66 тыс.

50% 1

www.studiobeeproductions.com
#Beewrangler
Below is the information on all 3 extractors that were used in this video, and more facts can be obtained by clicking on the site and exploring if need bee. Thanks for watching. God's peace to all. Mr. Ed
Maxantindustries.com
3100P Extractor
Are you into beekeeping seriously? Don't waste your money on a cheap machine unless you think your enthusiasm is a one year deal!
The Maxant 3100P machine is built to last a lifetime. These tanks are constructed from 20 gauge #4 polished stainless steel, with a conical bottom TIG welded for maximum draining. This is QUALITY. You will be amazed at the remarkable engineering of the inner basket which can hold up to nine frames. The inner basket is 100% stainless steel. TIG welded and tested on balancing machines. Stiffening rings located at the top and bottom.
For advanced hobby beekeepers - a money maker! Time is money and this machine is fast!
Nothing else on the market is quite like it. Extremely well-engineered with a conical bottom. Made from 20 gauge stainless steel. Stiffening rings located at top and bottom. Will extract wood or plastic frames with no modifications. Extracts 6 medium/shallows radially and 3 deeps/medium-shallows tangentially.
This machine is 18.5" in diameter, and 24.5" in height.
Shipped via UPS with or without leg kit.
Hillcobees.com
Enduro Honey Extractor - 6 Frame Electric
The Enduro is a terrific honey extractor for hobbyist beekeepers looking for high quality, feature-loaded machine at an affordable price. This machine stands head-and-shoulders above the competition in many ways, here are a few things that set it apart:
Proven HillCo PowerMax drive system: an industrial grade motor, gearbox, and controller. Smooth, quiet and durable, it's a great combination of simplicity and refinement. This is the same design that we use all the way up to our big 32 frame extractors!
23 gauge, type 304 stainless steel tank
"Ez-Drain" honey valve design: the honey drain valve is located slightly below the tank floor, giving you a complete, seamless honey drain. No more tipping the tank to get that last bit of honey out!
3 year, no hassle, top to bottom warranty: every part of this machine is backed by HillCo and guaranteed to last. We'll back it 100% for 3 years, an unheard-of warranty in this industry!
Designed and assembled in USA by HillCo!
Other features/specs:
1/8th horsepower PowerMax motor, 5:1 ratio worm-drive gearbox
Extracts 6 medium or shallow frames radially. Also extracts 3 deep frames tangentially, with the included deep frame cages. These cages slip in and out easily with no tools required, allowing you to switch from deeps to mediums in seconds!
Grease-able lower bearing
Rubber feet to protect your floor
5 gallon bucket and strainer fit below the honey gate
Tank diameter - 18"
Width (at widest point of legs) - 29"
Overall height - 48"
This is a fantastic machine, and we know you'll love it!
👉2 Frame: s.vevor.com/bf...
👉4 Frame: s.vevor.com/bf... (😍 Good Price )
👉8 Frame: s.vevor.com/bf...
Promote link: s.vevor.com/bf...
5% off discount code: VEVORSALE5
hashtag: #VEVOR #vevorhoneyextractor
· Powerful Electric Motor: This honey extractor features a 140 W 1.1A, 1300rpm motor with variable speed options, high-precision bearing, so it has higher rotation speed and low noise, saving your time and labor.
· Premium Stainless Steel: The motorized honey extractor body is made of high-quality stainless steel, wear-proof and secure for your long-lasting use. With the sleek finish and seamless welding construction, it is easy to clean after use.
· 4-Frame Capacity: Our electric honey extractor equipment handles up to 4 frames at once time. Fit for frames of 9.2 x 17.3 x 19.2 in /23.5 x 44 x 48.8 cm. The enclosed gear upon the frame will not contaminate the honey.
· Humanized Design: The 2" honey gate at the bottom of the tank allows the honey to flow at your will. Two clear perspex lids allow inspection of the extraction process while harvesting the honey. And the adjustable height fits your different needs.
· Easy to Assemble & Use: Assembling our apiary centrifuge equipment is really easy with simple steps. Just put beehive frames in and plug in to start. It is ideal for the hobbyist or small apiarist.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 361

@hillcollc Год назад

Thanks Mr Ed for a wonderful video! A quick note, the number on our controller screen is actually electrical hertz. It's a 60 hertz motor, but we govern it back to 50 hertz, which puts the top speed at about 280 RPM. We feel that this speed provides good efficiency, helps ensure that combs don't blow out during extracting, and just keeps the process more "calm". As the video shows, it performs very nicely at that speed. And yes, the legs ARE included in the price!

@jeffreystann7382 Год назад

I love my 9 frame HillCo extractor. It’s very quiet and is very stable. I also have their 27 frame uncapping tank and it pairs very well with the extractor.

@Chard-Bees Год назад

Wow, thanks for coming and explaining this. Having the manufacturer right on the video is a real help too!❤

@dontannery1805 Год назад

Are you boating it down to the palate? Thanks for the video I just bought a new maxan right before I seen this. I may have went to the 2nd one you showed but I think I'll be happy with this 1 nevertheless.

@JeffHorchoff Год назад

Thanks so much for clearing up the facts John, I wish I had made the points myself so you would not have had to do so. Thanks again for helping make this video possible. You did forget to mention however that this extractor will be given away to some lucky attendee at the 2024 Hive Life Conference. I know the details will be worked out soon and you will let me know so we can let everyone else now as well. God's peace brother. Mr. Ed

@JeffHorchoff Год назад

You got a great machine Don! Thanks for watching. God's peace brother. Mr. Ed

@lagrangebees Год назад

Since I want to be a full time beekeeper, I went for the biggest motorized radial extractor I could fit through my apartment door (Buy once, cry once) especially after using a tiny tangential 2 framer. Best purchase I made in a long time! My personal recommendation: No matter what size you want or need, get a radial extractor, no frame flipping that doubles extraction time.

@JeffHorchoff Год назад

Very good advice. Pay a bit more, but the for the extra price, it's money well spent. Thanks for watching. God's peace. Mr. Ed

@jessgreenwood262 Год назад

Grandmas honey spinner was small and made of oak with banding lime a barrel and enamal on the inside with the handle on the outside, she always sang hymms when spinning the honey, her favourite one was How Great Thy Art.

@dandorosheff256 6 месяцев назад

Since receiving my HillCo extractor and running about a dozen supers (some deep, but most medium frames) I feel experienced enough to share some comments. Overall, a well made extractor and fairly priced for a Made In USA product. I like some of the improvements on the original design like the extra large hinges to the front plastic cover and the very quite operating when balanced. Another huge pro that I need to point out is HillCo's fantastic customer service, informative RU-vid videos, and free shipping!!! Some drawbacks that I have identified. * rather sharp edges to the legs, in fact I cut the top of my barefooted toe when I scraped across it. shoes are recommended. * lack of handles for totting the unit (without motor assembly) out for cleanup or general relocation *uncertainty in toggling between clockwise and counter clockwise spin. For the likes of me I still haven't figured out the right combination or sequence of mashing the no/off switch, shift button, fwd/reverse, button. I sometimes make it happen, but mostly just spin one directional. * the absence of a tube of food grade grease. I notice this add on was provided with larger more expensive models. I used Crisco shortening and it works. But without some sort of lube the unit will make a squeaking noise, as expected. * the thickness of the two plastic see through covers for the top. Although these are completely sufficient and preform the necessary function, I was a little disappointed at the covers degree of flex in comparison to my first (lesser quality) extractor. * in all fairness the sloping interior bottom of the larger and more expensive models is a very nice feature. My model does not have one and this I knew making my purchase. However, I lean my unit forward and rest it in this position to allow the honey to drain out into my bucket for more complete emptying. * I do notice that tangentially extracted frames end cleaner than radially extracted frames. This makes me think that the motor RPM's might be a tiny bit slow. I do realize that the orientation of the two methods favors tangentially for cleaner frames, however on some larger models there is supposedly a "hack" that can lead to faster spin RPM's on those models. This hack is not a possibility on my 6x3 unit. Would i purchase again from HillCo? A resounding YES. I think for my operation I should have spent the extra money an went with the unit that can do 9 deeps or medium frames radially. This would allow for a complete super of 9-frames to be processed at a time. Price point and storage considerations were large factors in my decision process and upgrading from a 2-frame tangential was a necessity. I hope this helps the reader. Keep up the great job HillCo and look for some amazing products from them in the future.

@JeffHorchoff 6 месяцев назад

Bottom line, you can't go wrong owning a HillCo product. Not only a product that gets the job done, but with the best support and warranty out there. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Dan. Mr. Ed

@KajunHomestead Год назад

I have a vevor that I’m using now, it’s lasted me 4 season so for with no issues, but it is cheaply made and does hold honey at the bottom, but if your just starting out buying a lot of equipment you can’t beat the price, I’m fixing to get a bigger machine since my bee yard has grown and I really like the hillco units. Thanks for sharing Mr. Ed.

@ericscott3194 Год назад

Love my hillco. Small family business with excellent customer service and top knotch all the way. Lifetime quality. Thanks for the demo!!!

@billchriswell2925 Год назад

Bought a Hillco Enduro for this season...more than pleased with the overall build quality warrantee and value👍

@JeffHorchoff Год назад

I guarantee, as does Hillco, you are going to bee one satisfied customer. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Bill. Mr. Ed

@kennydykes1145 Год назад

Great video guys,, thanks for the comparisons. I started out with a 2 frame Vevor. One day as I was staring at those lids on mine, I realized they put the little metal button and handle on the lid, reversed and in the wrong holes. After switching them, the little screw button is actually a magnet and it contacts the screw on the side of the motor, which now it holds the lid up. Someday I hope to afford a Hillco radial frame extractor, but at this time I'll have to stick with the Vevor. This is only my 3rd year beekeeping. Have a blessed day.....

@JeffHorchoff Год назад

Nothing wrong with a Vevor extractor, it's a machine that gets the job done at an affordable price. I'm delighted to hear you are pleased with it's performance. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Kenny. Mr. Ed

@krissaann333 Год назад

How did you know my back was looking for an automatic spinner?!!! Lol! After last year's and now THIS year's honey, my mind is BLOWN by God's sweet blessings. Our three established hives in our backyard i have harvested over 300lbs! AND NO SUGAR WATER! I can't even imagine the possibilities with our new hives on our land. God is GREAT and you , sir, are a blessing of knowledge, patience, and JOY! 💜💜💜🙏🙏🙏

@nancynolton6079 Год назад

Jeff I think you may have the covers reversed on the Vivor extractor... mine has a magnetic screw that hold the cover up which lines up with the screw on the motor. Once you switch the lids around the lid should stay up to load frames... I know this because I installed mine incorrectly and had to do the switch and then it worked fine. Really it took two of you fellas to put the motor back on!? Guess I'll have to come down and show you how a little old lady does it! Actually the two parts that fit back together have different sized wedges so you need to make sure you have the correct two together for it to slip back in place. I spin 8 frames at a time, multiple times a season and have had this extractor for nine years and it still works great no problems. Keep it clean, keep it greased, replace the ball barring and it spins like a charm every time. As with any extractor of a smaller size making sure it is loaded evenly will take care of the wobbles and walking. So don't be putting two really fat frames across from two that have thinner filled comb or it will walk across the floor and that goes for any extractor regardless of how strongly it is build. If you do have uneven weighted frames try and match them up cat-i-corner to each other. If your extractor gets the wobbles then stop the machine and check the frame weights and shift frames to get the right balance. Frames that might contain some pollen will always weigh more as the pollen is never spun out.

@JeffHorchoff Год назад

Nancy, you have the patience of a saint. I'm delighted you are satisfied with your extractor as every one who purchases one should be. Thank you so much for the details of your comment, it will help many others who have bought a Vevor.....especially the magnet part and the loading of frames. God's peace. Mr. Ed

@snoozieq4584 Год назад

Thank you Mr. Ed. Thank you Charlie. Very educational. Not too sure about the Maxant and the Vevor extractors. The Hilco seems like the way to go as far as stability, features and build. Yeah, the Vevor is probably good for the hobbyist that doesn't have more than two or three bee boxes, however, the Hilco just exudes durability for the long term. Again, Thank you both for this great video and God Bee with you 🐝🐝🐝🐝🙏🙏

@rickabrams3422 Год назад

thank you as well. i'm in that boat only 3yrs in and 4 hives. i was really turned off by the height of the gate but the price point is hard to argue with. i guess the real questions are how long did you plan on keeping this product (quality?) and how long are you into keeping bees.

@rickyyeldell7262 Год назад

Thanks for the comparison video. I inherited a two frame, manual, tangential extractor from my Dad. It will extract but was wearing me out. I bought a 18 frame UltraMax from Hillco last year. It changed my life. I now look forward to extraction even more than usual. John has great customer service and a fine product at a fair price!

@JeffHorchoff Год назад

The leap from manual crank to motor crank is like night and day. When folks finally make the jump, they never have any regrets. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Ricky. Mr. Ed

@Aristodama Год назад

Mr. Ed, I don't have bees; I don't have much hands-on technical skills: I WAS MESMERIZED BY YOUR VIDEO! These 3 companies should buy you & Charlie a Beer! Or a Coffee & some beignets! It was a pleasure to listen to a Professional Bee-Keeper discussing Professional bee-keeping equipment. I've watched your videos where you have like 48 frames spinning in a Centrifuge, and you got a crew; those videos are fun! Thanks for thinking of the backyard Bee-Keepers, the little guys. God Bless you and Saint Joseph Abbey.

@JeffHorchoff Год назад

Thank you very much for your blessings, kind words, and for taking the time to watch my bee wrangling videos. Until the next time, God's peace. Mr. Ed

@loudimel5068 Год назад

Great job Jeff I love my Hillco 6 frame

@JeffHorchoff Год назад

Glad you enjoyed the video, thanks so much for watching. By the way, you have a great extractor. God's peace. Mr. Ed

@southtexasprepper1837 Год назад

Mr. Ed, Your videos are very entertaining and informative. Whenever I get the chance to watch them, I do so. GOD has so Blessed both You and Your Neighbors in harvesting Honey. ❤❤❤❤❤❤❤

@JeffHorchoff Год назад

I truly appreciate when someone takes the time to watch my videos. We are all very busy these days, and having a free moment to spend relaxing is a rarity. Thank you for spending yours watching my bee wrangling adventures. Thank you very much for your blessings and taking the time to watch. Until the next one, God's peace. Mr. Ed

@cypher8855 Год назад

Well done lifting those out of the boxes Mr Ed. For us short people it's harder to lift things out of tall boxes. I'm shorter than you so I would have more fun lifting things out. Thanks for all the info and more content boys. Keep on keepin on

@russellkoopman3004 Год назад

Great video Mr Ed and Charlie. You did a unbiased evaluation allowing people to chose. I bought the Hillco 800E at Hive Life 2022 and extracted 1,400 lbs of honey through it last year without a hitch. John offers so much service and quality at an affordable price not just on extractors but many other items.

@JeffHorchoff Год назад

Thanks Russell, and by the way, you got a great extractor. God's peace brother. Mr. Ed

@chuckoverturf6710 Год назад

Good morning Jeff & Charlie. Great presentation of the extraction machines. I haven't had enough honey to justify buying one of them yet. But I'm hoping and praying to get more from the three hives I've got going.

@JeffHorchoff Год назад

Trust me, one day you will be having an extractor. God's peace Chuck. Mr. Ed

@billyboy952 Год назад

Jeff, i have had the same maxant model for 5 years now, i have been very happy with it and had no issues.

@JeffHorchoff Год назад

A great machine for sure. Thanks for watching. God's peace Billy. Mr. Ed

@MinnesotaBeekeeper Год назад

So Maxant has you paying extra for the legs. I do appreciate the additional heat sinks on the Hillco motor. I could make a joke about the shake rattle and roll Vevor test and coffins in the background. I'll stick with my Lyson. My only regret is that it is not made in the USA. Also looking at the one star reviews is always interesting. Thank you brothers.

@JeffHorchoff Год назад

Lyson makes a great extractor and other machines as well. To bad I did not include one of theirs in this video. I hope to be using one of their bottlers in an upcoming comparison video. God's peace brother. Mr. Ed

@winniethepoohandeeyore2 Год назад

Greetings from SW OKlahoma Jeff and crew!

@brucekaminskimd3417 Год назад

Good morning, Mr. ED This is an excellent video still watching. I thought I would go ahead and give praise to the Lord for Mr. Ed and Goodtime Charle. This is what I am looking into this year! You always make my Friday mornings wonderful, thank u !

@JeffHorchoff Год назад

Always a pleasure to have you follow along Dr. Bruce. Question for you, how are your bees at the Applewood Farm these days? Thanks for watching. God's peace. Mr. Ed

@brucekaminskimd3417 Год назад

@@JeffHorchoff Well Mr. Ed They are on their own. What I want to do is get you and Mrs.Queen Bee Mona over here and help me and a few of my workers. All expenses on me you got let me know when you can come visit! I'm gonna try to visit you in Conroe, Texas, next weekend.

@peterlightbody8443 Год назад

Interesting video , the background display of coffins , most interesting , if I had a choice I would pick the hillco , not available here. Peter Australia 🇦🇺

@JeffHorchoff Год назад

I bet they will bee one day. Thanks for watching. God's peace Peter. Mr. Ed

@Thea_MojaveOutliersWhipmakers Год назад

Oh my goodness, you said $10,000 at first and I nearly screamed!! lol!

@johnking8679 Год назад

Great video and detailed information !! Thank you !!

@JeffHorchoff Год назад

You are very welcome, delighted to hear you thought the video had merit. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace John. Mr. Ed

@sailthebigorb7174 Год назад

Dang, I wish I had seen this before I bought my Vevo. Excellent video, but now I’m kicking myself.

@JeffHorchoff Год назад

Don't kick yourself to hard, the machine works just fine, and you can always sell it and move up later. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace. Mr. Ed

@Rod_Daigle 3 месяца назад

Lets see; 1000$, 750$, or 250$? Hmmm, for a hobbyist, small time beekeeper like myself its a no-brainer. Why on earth would I pay more than 250$ when I can see, and now know the Vevor can be MacGyvered to be the perfect extractor for my needs. Thanks Mr Ed and Charlie for the facts, I just bought the Vevor. Btw interesting back drop of caskets.

@JeffHorchoff 3 месяца назад

One of the reasons I post this type of video is to give exposure to the various equipment available to chose from. Not every beekeeper has the same needs, wants, or resources and thus the different selections. Delighted to hear your choice was an easy one, and I know you will be very satisfied with your selection. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Rod. Mr. Ed

@jamescarter7752 Год назад

You are right Jeff. The welds on the legs of the Vevor will break. I bought one about 4 years ago to supplement a 1970's model Kelley extractor, and one of the legs broke off at the tank on the second load. They did honor the warranty and sent me another tank, but I didn't trust it either so I sold it. Enjoyed the video, and God bless.

@jasonparsons9510 Год назад

Bought a Vevor 4/8 frame electric with free shipping and legs for $260.00 right before I came across your awesome and informative video. Thanks for the info!

@JeffHorchoff Год назад

You are very welcome, you are going to love the electric motor instead of the hand crank. Happy honey harvesting! Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Jason. Mr. Ed

@tommyburt6207 Год назад

Hi Jeff I’ve been manually slinging out my honey for the last 9 years on an SAF Natura 4/2 (Italy) extractor. It is a good quality product for my 14+ hives but my wife and I are whipped after slinging honey with the hand crank. It also wobbles/walks/tilts no matter how you try to secure it until it gets some “honey weight” into the attached bottling tank. Your unboxing/demo sold me straightaway on the HillCo Enduro. I watched yours and Charlie’s video 3 times just to be sure I didn’t miss something before making my decision. Also, HillCo’s (John’s) sales video on the Enduro does an excellent job on promoting the confidence they have in their product. Also HillCo’s responses in the comments on your video also sold me. I ordered my HillCo Enduro shortly after watching yours and Charlie’s excellent expose of the 3 extractors. You know, I truly believe you are as happy a guy all day long as you are on your videos. Best regards Tommy Burt Bay Minette, Alabama Baldwin County

@JeffHorchoff Год назад

You are going to bee very happy with your Enduro motorized extractor. I'm happy to have been a part of your decision making process. Thank you for your kind words and for taking the time to watch the video. God's peace Tommy. Mr. Ed

@Userxyz-z2d Год назад

Im buying one too.

@tommyburt6207 Год назад

I got so excited about extracting, that I went ahead and updated my cracked/chipped/partialy broken uncapping tub to a HillCo 30” stainless steel uncapping tank. It is on wheels and has a lid/cover that also it a big plus and holds alot more cappings

@Thea_MojaveOutliersWhipmakers Год назад

Props to Good Time Charlie's BEEES!! WOWEEE!!

@jpthedelawarebeeman7887 Год назад

Hi Jeff, being a backyard beekeeper I went from a manual 2 frame extractor to the Vevor Extractor. It does save time but the honey does sit in the bottom because like you said as the gate is higher than the honey level. I have to tilt it to get all the honey out. Fortunately I have it mounted on a wheeled base and I incorporated 2 hinges in the front and a quick release on the back to allow it to easily tilt when draining honey or cleaning it out. I use the base to help with out of balance frames. I'm really liking the Hilco Extractor minus the fact that model only does 3 deeps Who knows if I ever get more colonies I will be upgrading :) Thank you and Charlie for this video. Oh by the way I got the Vevor only because I had the ability to get it free using points built up so for FREE it works for me for the time being :)

@JeffHorchoff Год назад

Getting something that you can use for free is ALWAYS the best deal. God's peace brother. Mr. Ed

@huldu Год назад

That hole placement is very odd, if I were to have designed a similar product I would probably wouldn't have thought of it either. It just makes perfect sense to place the hole lower like in the other two models.

@JoSeeFuss Год назад

Problem is engineers who don't actually use the final product are the ones who draw it up. I'm soon to be retired, 40+ years as an aircraft maintainer dealing with the mistakes of engineers the entire time. I know all of y'all's pain, I really do. So with a bit of backyard engineering, you can get a new hole drilled in the bottom, and get a drain installed. Then you should be good to go. Call around to local welder shops, they repair engineers mistakes too.

@MrPhillip2 Год назад

@@JoSeeFuss I agree, they should use it before ramping up mass production on a poor design. No Beta testing. On the other hand, beekeeping in China is a different sport, they harvest uncapped nectar then dehydrate it with resin technology, the uncapped nectar runs out of the extractor easier than mature honey.

@davidhorsley4657 Год назад

Based mostly on this video, I ordered the Hillco. Thanks, Jeff & Charlie!

@JeffHorchoff Год назад

And you will not be disappointed at all. In my opinion, you made a very good choice. Thanks for watching. God's peace David. Mr. Ed

@amfarmsllc5624 Год назад

@jeff Horchoff, I bought a big one last year from John @hillco,llc. You asked me the other night if I had gotten my honey house ready. This will be my first season using it and I am excited to use it but I do have it set up and ready!

@JeffHorchoff Год назад

I know you guys will love your extractor. God's peace Amanda. Mr. Ed

@tealkerberus748 10 месяцев назад

In Australia it's illegal to leave sticky frames, scrap, or tools outside to be robbed, because of the risk of spreading disease. So to give the honey back to the bees, you either put these things inside the hive box for the bees to clean up, or you build a bigger box to temporarily expand their hive so they can clean your tools in the privacy of their own home. Centrifuges that fit inside a reasonably portable wooden box are a priority. Otherwise you're washing all that honey out with water.

@JeffHorchoff 10 месяцев назад

What a shame the restrictions the Australian government has placed on beekeepers there. I know the reasons are legitimate due to the invasion of the mites, but personally, I don't agree with the regulations. God's peace brother. Mr. Ed

@JeanIrwin Год назад

The Vivor looks like my Vivo. Only difference is a magnet that holds the lid open. You are right about the legs. I had one weld pop near the bottom. I plan on bolting but for now I just ratchet strapped it tight.😁I too have to tilt which I prop with an angled 4" piece baseboard to get most of the honey. Works for me. I do like it,esp the price. You do have to make sure things are balanced as good as possible. I also mounted it on a piece of plywood with wheels to help with leg stress/shaking. Have had 4-5 years.

@dotmiller6382 Год назад

Thanks for the video. I’ve been thinking about treating myself to a motorized extractor for a while now and this helped me make my decision.

@JeffHorchoff Год назад

Happy to have been there for you, you are going to love having a motor on the extractor. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Dot. Mr. Ed

@user-pi8us8dp3b 2 месяца назад

I am a math person. My math says it will take 3 minutes to extract each large frame. If you have 50 frames a year to extract Vevor's junk is probably ok. I expect at 100 frames a year the shear NOT user friendly part of it would make it "not worth the saving' At $700 the American made three year warranty and is easy to use would come into its own. fighting your equipment push people to avoid doing their jobs in a timely manner which leads to all kinds of other issues. Hell if you have the 1000 what a bit more... LOL. $700 100 frames a year. 7 years.... $1 a frame. Three minutes a frame totals 35 hours of use in 7 years... you can show this and thus sell it for 1/2 price.... now it is 50 cents per frame. Thank you for doing what you do. You have helped me tremendously in my research and desire to get going in honey bees.

@JeffHorchoff 2 месяца назад

Happy to bee there for you Mat, God's peace brother. Mr. Ed

@GrammyMidwife Год назад

Great comparison video! More information on each extractor than I’ve gotten from any other. Keep up the great job!

@JeffHorchoff Год назад

Hey Lisa! Happy to hear you liked the comparisons, I was blessed to have so many good ones to compare with each other. Thanks for watching. God's peace. Mr. Ed

@photofun4u2E Год назад

Wow! Thanks for doing this! Exactly what I needed, now to sell some honey to buy to buy one. Thanks!

@JeffHorchoff Год назад

Delighted to bee of assistance, glad you enjoyed the video. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace. Mr. Ed

@heavymechanic2 Год назад

Mr. Ed, I bought a Vevor 4/8 frame extractor priced around 269 by registering an account, this is to replace the basic 2-frame unit I had (it works) as entry level beekeeping. I could not justify the cost of a more deluxe extractor having up to a dozen honey supers.. TIPS: run the speed very slow until the weight is removed, rotate frames and repeat before increasing speed, rotate one more time. This will reduce shaking and blow outs... When I was a young man, I was extracting honey hundreds of natural wax/wire frames and learned this process... Great demo of the other machines available to backyard beekeepers

@bj8342 Год назад

Exactly what JP the Delaware BeeMan and other people have said who have Tangential based extractors to start very slow and flip before fully extracted, doesn't matter who the vendor is. I would be worried about a the durability of a plastic frame holder. I know a few people who did like JP described below - removed the factory legs and mounted it on a wood framed box ( adding rubber vibration dampeners - food grade rubber mats/pads) and that really eliminated the vibration (caused by the simple fact that the frames never contain the same amount of honey). The wood box has a base wide enough that the Honey Drain Pails fit under neath it making for convenient off season storage. Easy to tilt to drain the bottom of the tank.

@tommychew6544 Год назад

Great video don't know why I put off watching it for several hours. I think I liked the Hill Co the most. The company I worked for 31 years before I retired last summer would have written you up for putting your hand inside those without removing the power source, glad I don't work there anymore but I'd be lying if I said I wasn't worried when you did that with the Chinese model, even though I likely would have done the same on the other two extractors, even though it's not really safe. An issue with the rheostat that controls the speed from zero to full on could have broken bones and I was flinching watching. I guess having safety drilled into you for that many years is something that's hard to forget. After so many years and the amount of product we put out I did see several accidents from unexpected energy releases casing broken bones, amputations and one loss of life. Watch yourself Sir, I want to keep on enjoying your videos, and don't want to see anyone getting hurt like that again. Thanks for the video.

@branmcg9844 Год назад

Kept me captivated for the full hour and change. I was waiting for the legs to fail on the Vevor but Goodtime Charly had a death grip on the cylinder. I will avoid buying Chinese products unless they are free. Hill Co for me please. At least it is assembled in the U.S.

@gigi3242 Год назад

To me, the Hill Co looked like a better product, per dollar. I think you might be a bit too nice to do product comparisons, lol Have a Beautiful Blessed weekend, glad your flow has come on.

@NotAsTraceable Год назад

Waiting on my Hillco to ship. Hopefully this Friday. Upgrading from an Amazon 2 frame hand crank wobble monster. I've extracted over 70 gallons of honey with it over the past couple of years. It's time to use a little electricity. Love the videos Mr Ed. Best wishes.

@JeffHorchoff Год назад

You are going to love your new extractor. Happy honey harvesting! God's peace. Mr. Ed

@onyxblessed7775 Год назад

Just wanted to say thank you. I’ve been a sub for years and I always find your videos absolutely amazing. You inspire me so much but I can’t do something like this, so your videos take me there. Thank you so much, amazing channel, epic content and I’ll definitely keep watching…………..you keep making more lol. Take care, Blessed Be Brother ❤

@JeffHorchoff Год назад

Thank you so much for your blessings, kind words, and for spending so much of your time following along with my bee wrangling adventures, it is ALL greatly appreciated. God's peace. Mr. Ed

@gordonspond Год назад

Hi Jeff and Charlie!!

@JeffHorchoff Год назад

Hey Gordon! Thanks so much for the shout out and for taking the time to watch the video. Until the next one, God's peace. Mr. Ed

@RH-bv2br Год назад

Great video I have been impressed with Hillco since I bought items from them at the 22 Hive Life another reason to go to it and since then I use them as a go to for equipment I have found them to have some of the best prices also.

@chelsealeonardbaum23 Год назад

Thank you Jeff

@billysanford9799 Год назад

Fantastic Video! Thanks for the information.

@JeffHorchoff Год назад

You are very welcome Billy, I hope it will help when the time comes for you to buy an extractor. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace brother. Mr. Ed

@yostenasalama1895 11 месяцев назад

I love his energy ❤

@JeffHorchoff 11 месяцев назад

Being retired for 14 years has a lot to do with it, but it's really nice to hear you say that. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Yostena. Mr. Ed

@ReflectedMiles Год назад

03:45 All those portable coffins in the background.... 😊

@JeffHorchoff Год назад

The abbey has several cottage industries, and caskets are just one of them. Because I volunteer in there as well as the honey, I often use the wood shop to make videos as there is so much room inside the building. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace. Mr. Ed

@texaswatermama Год назад

Wow, Charlie what’s you secret. I took a small amount of honey yesterday. I hand crushed and strained. My bees are happy with the hill country wild flowers.

@JeffHorchoff Год назад

Charlie sings to his bees every night. Congratulations on your harvest, I know you are going to enjoy it. Thanks for watching. God's peace. Mr. Ed

@fincarosa6767 10 месяцев назад

Great review!! Thanks for sharing this and your thorough, honest review of each.

@Peeem Год назад

Great video Mr. Ed, gadget reviews like these are awesome because people who want to become beekeepers can come check out reviews before buying.

@Jackflash219 Год назад

God to see how each work for sure. Great job!

@JeffHorchoff Год назад

See you in a few days, God's peace brother. Mr. Ed

@kennith. Год назад

Great video Mr. Ed. Thank you Charlie for all the prep and behind the scene work.

@melaniehefner948 Год назад

Charlie’s bees are sooooo happy!

@JeffHorchoff Год назад

And Charlie is very happy with them as well! Thanks for watching. God's peace Melanie. Mr. Ed

@linedanzer4302 Год назад

*Hey Mr. Ed!!* I was just telling someone about you this past Monday. There is a beehive across the street and it looks like its wrapped up in a fine net. Hundreds and hundreds of bees! Wish you were here to tackle it. *Good to see you! Love your video content. Be well my friend.*

@JeffHorchoff Год назад

You know if I was there I'd wrangle those bees....and you could help me. Always great to hear from you LD, God's peace sister. Mr. Ed

@linedanzer4302 Год назад

@@JeffHorchoff I wish you were nearby. I just learned from the City that it's the owner's discretion of what to do with the bees. But Mr. Ed have you ever seen them in a sack? I have some pictures.

@rickwarner516 Год назад

Good job Jeff God bless you all

@cherylcarnes4207 Год назад

I like the Hilco. It seemed to appeal to me more. Jeff and Charlie you two are very good salesmen. Charlie I loved at the end how you swept your arm around to all of them. Did you used to a "Bob's beauty" on Prices Right? Thank You Jesus for the entertainment.

@JeffHorchoff Год назад

I think he tried out for the part but he was not as pretty as the ladies. Thanks for watching. God's peace Cheryl. Mr. Ed

@framcesmoore Год назад

I just got 1 from Hillco, I watched Mike Berry and he liked the hillco he had did a video on it I get to use mine this week. I enjoyed the video hope u have a blessed day

@eberntson Год назад

Thanks for the video, Mr Ed. I own the VEVOR one and borrow a MAXANT sometimes. There is a difference, but the VEVOR was a lot cheaper. MAXANT is a perfect machine with performance, finished edges, and substantial. VEVOR gets the job done and bolts to a frame; it's okay. If I had my druthers tho, I'd own the MAXANT. Never used the Eundoro.

@ericklingele661 Год назад

Nice job Jeff and Charlie. John @ Hillco has a video on his website that explains the motor and worm drive. I would prefer to spend a little more to get a simple/beefy motor and capacity for future expansion. I am looking at the 18 frame UltraMax extractor. It is $400 dollars more than the minimax. Added a second apiary this year with plans for a third site. I am about 2/3rds of the way toward saving up for the UltraMax.

@JeffHorchoff Год назад

I think you are making a very smart move, save your money and get the exact extractor for your needs. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Eric. Mr. Ed

@joseluisduarte3313 Год назад

Hey Gents . Looking good , G'day for Sydney Australia

@JeffHorchoff Год назад

Hey Jose, glad to see the Aussie contingent checking in. Thanks for watching. God's peace. Mr. Ed

@joseluisduarte3313 Год назад

@@JeffHorchoff God's peace

@SurreyAlan 10 месяцев назад

In the UK lookalike Vevors under different brand names sell for between 250 and 600 of our British pounds, usually we pay the same in £'s as you pay in $'s. The price differential is crazy. and for the quality I'd say 250-300 is the right price. For a well built extractor we'd expect to pay 900+. We bought one 5 years ago and for our 6 hives it works well enough as we usually only have 18 supers to extract. Our older model has substantial metal legs bolted to substantial welded brackets so was better made but the rest looks identical. It does need tipping to extract all the honey but we've never found that much of an issue. Fixing a small magnet to the top of the cover keeps it open as it then attached to the top of the motor. There should be a ball bearing in the bottom of the tank for the cage to spin on. If you don't leave the tap open the frame lugs quickly dip into the honey. Initial slow running and turning the frames more than once can minimise the wobble, with only a few supers this isn't a big issue. Easy to take apart and very easy to clean. After five years our motor needs replacing which costs about 130 so debating whether to repair or spend a lot more on a good make. Vevors might be fine but if a lookalike I'd suggest having it checked for electrical safety, on our unbranded version the live supply wire routes to the microswitch on the cover, if that chafes or loosens and comes into contact with the metal it's attached to then the extractor could be live. The earth wire goes to the speed regulator but on ours does not carry through to the motor and hence back to the chassis so I don't see any path to earth in the event of a fault except through someone touching it. Think it's easily resolved with an earth wire from the speed regulator to the chassis and using an RCD but I'm no electrician so suggest taking advice.

@davidhorsley4657 7 месяцев назад

Jeff predicted I wouldn't be disappointed in the Hillco extractor. I'm only disappointed I didn't buy the Hillco sooner. 😊

@JeffHorchoff 7 месяцев назад

You did real good getting one, plus, it has the BEST warrantee on the market. Thanks for watching. God's peace David. Mr. Ed

@raymondbrown867 Год назад

Looks like caskets in background. Nice .

@JeffHorchoff Год назад

They are. I also volunteer in the wood shop helping to build them, and because the shop is so large, I often use it to shot videos. Thanks for watching. God's peace Raymond. Mr. Ed

@TheBubagrunt Год назад

The one part of this video I wish you had included what was your preference to the manufacture and design a more in depth. You remained unbiased; however people value experience and knowledge. Your impressions and insights are valuable. From my analysis, the Hilco machine build quality and design quality as the Maxiant were similar. With the Vevore being the least in quality and design. However, all three of their place in the industry. Vevore is cheap but you know that from the start and appeals to hobbyists and start ups. The Hilco was the best in my opinion but I would use the Vevore just because it was cheaper. I may repair the faulty gate design by cutting a 2 inch piece of tubing at a 40 degree angle at the bottom and slot it and move the bung. Stainless is easy to TIG. Even if you paid someone I would think it would still be money ahead for a piece of equipment used seldomly. But the Hilco is the Best Buy and balance. Would love your opinions even though Vevore is sponsoring you. Maybe you drive design change with them for the future.

@JeffHorchoff Год назад

Of course I had my preferred extractor, but as I was making a comparison video to show the different choices an individual has when choosing an extractor, I wanted them to make the decision for themselves based on what they saw and not what I thought. Each extractor preformed the function it was designed to do, it was the price someone wanted to pay that would determine which one suits them best, and if you paid more money, you got better quality along with better performance. Just to clarify, none of the manufacturers sponsor me, but all submitted their product for the comparison. And one final comment, for my money, it would have been the Hillco extractor. Thanks so much for your comment and for watching, it is greatly appreciated. Until the next one, God's peace brother. Mr. Ed

@Thea_MojaveOutliersWhipmakers Год назад

This was a superb and fascinating video, Mr. Ed! You were VERY thorough, which is extremely helpful, specially for those of us who are dithering. ;)

@GEEZBEEZ Год назад

Nice comparisons. You and Charlie did a great job. Hope your flow goes and goes. Take care and God bless.

@tomcrynock37 Год назад

Great review. Thank you for all the detailed information.

@rtxhoneybees Год назад

Great comparisons. That Vevor you have is not the 8/4 version. It will only do 4 medium frames in the tangential position. Even if you load 8 radially (2 next to the divider) one or both will flip over into the tangential position when the machine starts to spin. I just purchased and used (for the first time) the 8/4 Vevor ($270) and it has a different basket. There is a space that will hold a medium frame in the radial position between each compartment. I tried loading 8 frames in it radially and at least one of the mediums always fell into the tangential position. I finally gave up and just put 4 in the extractor in the aforementioned space and it worked fine. I suppose I could have run 4 radial and 4 tangential but that seems like a hassle. The four radial kept up with me as I cannot uncap that fast anyway. Your assessment of the Vevor was fair with the exception of 2 things. Mine has magnets that hold the plexi-covers open. I think maybe you got the covers reversed. Also it doesn't take two people to put the motor on. I have done it at least 5 times with no help. You went too easy on them with the height of the gate. You have to tip the unit AND use a spoon to lift the honey into the gate. That is annoying and time consuming. I AM NOT defending or promoting the Vevor. Its functional and that's about it. It did beat the heck the work load I had with my Mann Lake, Hand crank, 3 frame tangential and cost much less. Hopefully, it'll help me earn enough honey money to be able to upgrade to a Hillco 18 or a Lyson 20.

@JeffHorchoff Год назад

I agree with the way you are thinking. Move up slow, but very methodically. Thanks for watching. God's peace Phillip. Mr. Ed

@ronlogreco876 Год назад

I have this model. It does hold 8 medium frames in the radial position. Each of the four compartments hold 2 frames on angles; one on either side of the compartment. Nothing goes in the front position, The front position is for deep only. It's best to practice with empty frames before loading sticky, drippy honey frames. Vevor has videos to show you how to operate the machine. The biggest cons are replacing the motor assembly( aligning J bolts and frame cage shaft with out cutting your hands is challenging). The shaft coupler collar is under the lid and the allan bolts must be tight or the frame cage will not spin. The handle on my honey gate snapped off when I was tightening during installation. I over tightened an acorn nut and it exploded. Yes there is magnets on doors that stick to motor holding the door open. The motor fan was making a clattering noise then I noticed it was hitting the cover grate. I bent the cover grate up and noise stopped. There's also shutoff switch's on doors that kill motor if door is opened while spinning. You need to be handy to tweak some sloppy Chinese manufacturing

@InsaneFirebat Год назад

Woo! Charlie brought the good stuff today!

@dalesteffen985 7 месяцев назад

Hi Mr. Ed, on the Maxat extractor the motor looks like a Bodine Electric motor that is made in Peosta Ia. I work there, and I have seen the name plate on the motors we made. God bless you and keep the videos flowing thru.

@JeffHorchoff 7 месяцев назад

I don't really know if it was a Bodine motor, but if it was, I bet it was one YOU made, thank you for your sweat and hard work. I am a huge supporter of "American made." Thank you for your blessings and bee assured, I will be making more! Thanks for watching. God's peace Dale. Mr. Ed

@Swimmer173 3 месяца назад

very informative, great , thanks.

@JeffHorchoff 3 месяца назад

Glad you enjoyed the video and found it informative...and hopefully somewhat entertaining as well. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Rob. Mr. Ed

@kat2641 Год назад

Well I own the cheep one coz I am a cheep butt😂😂😂 but as my grand father always said : son you get what you pay for ❤ but the only drawback that I have on mine is like you said the spec it clean up is a little longer because you have to tip the unit to drain and you do not get oh I would say you probably lose maybe 3 to 4 ounces of honey that you don’t get out.. but they really could not weld a nipple on the side without getting into paten pending problems but with the way they got their spec and they cannot have a raise bottom because of the plastic nut turns but for 300 bucks I’m going on year number three this year it hasn’t broke on me. It hasn’t give me an ounce problem but I know there are some that had problems but being an all fair and honest you can buy a lemon Cadillac but thank you for a great demonstration. Had I seen your video before I probably would’ve not bought the vector. But? It does a job and I did not really expect a Cadillac for $300. I knew I was buying a horse and buggy when I bought it but thank you for a great comparison.

@JeffHorchoff Год назад

Even the less expensive extractors do the same job, and as long as that's done, it's all good. However, as one continues on in their beekeeping journey, we tend to upgrade our equipment looking for more efficiency and ease of operation. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Kat. Mr. Ed

@andysummers2742 Год назад

watched another review on the VEVOR and the guy that had it , after using the tank where the legs attach form stress cracks after a short. he had to get the tank rewelded to prevent leaking

@JeffHorchoff Год назад

I can see that happening, but for the price you pay for the extractor, it's not surprising. Thanks for watching. God's peace Andy. Mr. Ed

@artmonk5907 Год назад

Good video! Thanks guys!

@JeffHorchoff Год назад

You are very welcome, glad you enjoyed the video and I hope it gave you some good insight on extractors. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Art. Mr. Ed

@keithspillman Год назад

Thanks Jeff and Charlie!! Another informative video. I'm looking to purchase an extractor this Winter..... probably at the Hive Life 2024 conference. After running 14 supers through my 4 frame manual crank model, I think it's time for an upgrade!!!! 😆That Hilco model is looking pretty sweet!!! Take care!!

@dannyh982 Год назад

You can get that Hilco and Jeff and I can borrow it 🤣

@keithspillman Год назад

@@dannyh982 Hehe!!!!

@JeffHorchoff Год назад

Great news Keith, the Hillco extractor I used in this video will be given away at the 2024 Hive Life Conference. The details have not been worked out yet, but rest assured, it will happen. God's peace brother. Mr. Ed

@gunlinebees.3831 Год назад

Are those new long hives in the background??? Lol! 😳😂

@ericgunter45 Год назад

Have a vevor 4/8 ordered should be in this week. Between my brother and I we have 14 hives. So it should work perfect till our number of hives gets high enough to get a larger Hillco

@JeffHorchoff Год назад

I love your plan, expand and move up. Keep up your efforts, you will bee rewarded for them. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Eric. Mr. Ed

@NATURALBEEKEEPERSCOLLECTIVE Год назад

The only time that tilting the tanks to get the last bit out would be a problem, is if they have to be bolted to the floor so they dont move around when spinning, We had one that spun so violently it ripped the plug out of the wall that was way back in 1996 ish lol My grandad went nuts at the manufacturer as it was quite expensive. We have sinse made our own that does not vibrate around or need to be tilted Anyways great reviews Mr Ed

@JeffHorchoff Год назад

Great story, thanks for sharing it, and I bet your grandad was mad...so would I have been. Thanks for watching. God's peace. Mr. Ed

@NATURALBEEKEEPERSCOLLECTIVE Год назад

@@JeffHorchoff I just edited my comment so it actually makes more sense hahaha Blame the Honey Mead from another Abbey and the fact I had a long day at work and was super tired lol Hope you have an awesome weekend,

@donbearden1953 Год назад

Mr Ed, there’s a big difference in the pricing but as a rule, normally you get what you pay for! If I needed a new extractor I would defiantly buy the HillCo. It comes with a great warranty and I’m sure you won’t beat the customer service! John can’t be beat in that area and he stands behind his products and you don’t have any problem getting someone on the phone when you call. Thank you & Charlie for producing this excellent video. How much honey did ya’ll get out of the 10 frames?

@hillcollc Год назад

Thank you so much Don!

@donbearden1953 Год назад

@@hillcollc My pleasure John! I call them like I see them. I wasn’t blowing smoke or sucking up!

@stonegatefarms Год назад

I couldn't agree more, Don! I have a Vivo. I will be buying a HillCo. This year at Hive Life. So John, save me one this year! I need it to go with my HillCo uncapping tank my boys traded you for during Hive Life this past year. 😁👍

@JeffHorchoff Год назад

You can't go wrong with a Hillco extractor no matter which one you purchase. Charlie got over 5 gallons from those 10 frames, super nice honey. God's peace Don. Mr. Ed

@JeffHorchoff Год назад

Good news Brian. You could actually win the Hillco extractor I used on this video at Hive Life 2024, it will be given away. Stay tuned for more info on that. Thanks for watching. God's peace. Mr. Ed

@martenapperloo1055 Год назад

Very informed video, thanks you guys

@JeffHorchoff Год назад

You are very welcome. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Marten. Mr. Ed

@martenapperloo1055 Год назад

@@JeffHorchoff Jeff, I have been watching your videos for a couple of years now and thourly enjoy watching you and Charlie making them ,keep up the good work and entertainment, Gods continued blessings on you and Charlie and your families.

@texanasimmons1761 Год назад

If I was in the market for an extractor, I dont think, even on a tight budget, Id get that Vevore extractor. It might hold more frames at a time, but theres just too many things in the 'con' column to out distance the 'pro' column. Its too flimsy and you have to tip it to get all of the honey out. Those weak legs wont last long with the repeated tipping up on 2 legs. I think Id save up and get the mid-priced one.

@wombat5555 Год назад

I thought those hives behind him are a bit big.. imagine the size of the frames... 🙏 🤣

@JeffHorchoff Год назад

And because they weigh so much once they are full of honey, you need a crane to lift them. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace. Mr. Ed

@wombat5555 Год назад

@@JeffHorchoff thankyou Mr Ed. I have enjoyed your videos. So much of this has changed in the last 8yrs. Yeah I was "away" for a while lol. Honey is soooooooo expensive these days. I may just make my own. You guys do a great job..

@alanwiebelhaus8750 Год назад

I have that exact extractor maxant. It has been very dependable but there is a week spot. Where the legs attach to the tank the little angle clip. With the vibration of extraction the angle clip cracks and the leg comes off I had to have that part replaced Also it is a little tight to load

@JeffHorchoff Год назад

I found it tight to load as well, but the machine is a VERY nice one. I do see how the clips could break off, but I'm sure it is not a big deal. Thanks for watching. God's peace Alan. Mr. Ed

@shevlin2650 Год назад

Jeff and Charlie, Great video and presentation. I presently have a manual 2 frame Velvor extractor, it was very inexpensive but does have short-comings. I like the idea of Hilco's 3 year warranty, with eight hives it would take me 3 years to really give it a good workout. It would be nice to hear from you how the extracting of medium frames in the radial flow worked out. Especially where two mediums were back to back during the extraction. Will be placing an order for one of those extractors next January at the Hive Life Convention. Look forward to seeing you and your bride again at Hive Life. You have to get Charlie to accompany you guys there also. SML BEEs / SWVA.

@JeffHorchoff Год назад

Good news Craig, the Hillco extractor I used on this video will be given away at Hive Life 2024. Not sure how it will be done, but stay tuned for further details. See you there. God's peace brother. Mr. Ed

@FlyntFarms Год назад

I have the 18 frame extractor from HillCo and I love it second year spinning honey with it

@JeffHorchoff Год назад

You have yourself a real winner! Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Jonathan. Mr. Ed

@FlyntFarms Год назад

@@JeffHorchoff I always watch them just don’t always comment. I still wanna come see your place one day I’m right here in Hammond

@luisbatistam_ Год назад

Thanks Mr. Ed that's great. I like the Hillco one. I wish have one of them, i need it. But i don't know how to take it to my country. Thanks a lot. I'll investigate how i can bring it.

@JeffHorchoff Год назад

You will not bee sorry to get one once you find a way to get it home. Thanks for watching. God's peace Luis. Mr. Ed

@Tj-ot4jp Год назад

As for the Vevor Jeff you know what they say "buy cheap,buy twice" unfortunately it's a lesson I had to learn.

@MERRLINN Год назад

Very interesting

@JeffHorchoff Год назад

I'm glad you enjoyed the video, and I am grateful for your gift, thank you God's peace Larry. Mr. Ed

@imacmanx8562 Год назад

I would have thought you'd give your opinion on which is the best one, based on all the features, even though the choice is obvious IMO, (HillCo). Only one with any warranty, more rigid "pot", level drain opening, legs included, etc., shipping included, and MADE IN USA.

@JeffHorchoff Год назад

The purpose of the video was to show comparisons and point out different aspects of each machine, and each person who buys an extractor buys them for different reasons. I was trying to make that point and not express my personal opinions. Thanks for watching. God's peace. Mr. Ed

@Userxyz-z2d Год назад

The HillCo is assembled in the USA

@KenHill Год назад

Thanks Mr. Ed and Goodtime Charlie! I'll say that the Vivor is out of the running for anyone except the short timer or brand new beginner beekeeper. This is an interesting inexpensive brand coming out of China and they make a whole lot of different stuff including construction tools. What can you say about tanks that have a sloped bottom and the correct location for the outlet? Superior! I'd say the preference is up to the individual for these two excellent machines. I think that the Hillco is the overall winner: It appears strong enough even without the extra hoops at top and bottom, look at the rolled profiled ribs on the tank that will add some strength! A solid build overall and a 3-year warranty; $719.00 shipping included is a great price compared to the Maxant, legs included as well.

@scottrodgers2440 Год назад

We I made my mind up its going to be Hillco for sure getting the hand crank nice thing about that you can add a motor at any time

@JeffHorchoff Год назад

On most extractors that is an available option, get the hand crank first and then the motor upgrade. Thanks for watching, and I hope you will check out more of my bee wrangling/ bee rescues adventures and let me know what you think of them. By the way, I post a new video every Friday morning, and I look forward to hearing from you again soon. God's peace Scott. Mr. Ed

@benjamindejonge3624 Год назад

Like the top bar hives on the back ground

@davidlewis4179 Год назад

I started in 2019 by buying a 2 frame extractor that looks very much like the Vevor. After the honey season was over last year I purchased the UltraMax (next size up) from HillCo. I'm looking forward to using it this year. I'd like to get a set of the new hinges for the cover. HillCo is constantly improving their products! The UltraMax slopes out and forward towards the exit gate. The gate is also formed in to the bottom. I would call them "L" bolts. On my 2 frame tangential I flip the frames twice to balance the frames. After the first flip I run 5 minutes per side. If the frames are balanced to start then it's only one flip.

@retiremann1031 Год назад

Great job 👍🏻

@DialedN_07 Год назад

One issue that I learned for the first time this year is my all plastic frames do not fit in my radial extractor and must be loaded tangentially. This was a major frustration for me. Luckily I had only 4 plastic frames, but I bought 16 more. I'll be selling them and only using wooden frames that actually fit in my extractor so I can spin all frames radially in my 9 frame extractor.

@JeffHorchoff Год назад

I never heard of that before, but I do believe it as there are so many manufactures of plastic frames. Thanks for watching. God's peace. Mr. Ed