I know this comment is at least a year old... but for your "issue" with the bolts at the top, just turn them around. Put the head of the bolt on the inside, and let the threads go "out the top" so that when the lid is open, it's a smoother surface on the inside. It's not like you need it flat on the top of the extractor... or am I missing someething. GREAT video, and thanks for the review.
I agree, easy fix. I was just pointing that out as one of only two little issues I found. I talked to John about it because it comes assembled like that. Thanks for watching and glad you enjoyed the video!!
the most important question is how long the plastic frame will last. ( what ever the material is) you know any plastic or PVC type things will break down and crack over time. In 10 years They better replace the plastic exacter parts.
I am confident it will last well over ten years. They’ve been used in Europe for many years now and I really believe the flex that they allow helps with the true balance that I had with it. May time will tell, but I think being that is a nylon type it will last with no issues.
Hi Mike, now that you've had the Hillco extractor for a couple years now, any updates on how the plastic cage is holding up? Any sag, cracks, deterioration or durability concerns that you've noticed? Great video(s) brother...
I haven’t noticed any weakness in the cage thus far. I honestly think the material used helps with the balance of the extractor. The little bit of flex that it has absorbs some of the energy. It is not brittle or showing any signs of cracking or deterioration. I’m glad that you asked this as I need to mention this in a video at the end of the season. Thanks for the support!!
I kno this is a year old but now I kno the Bee equipment Im gunna buy! Im so glad I saw this vid. Also, I could watch a longer vid uncapping, spinning, watching the honey flow, measuring it. I never get bored.
Great Video Mike…. Was that person you mentioned about cutting just the cappings off the phat comb me by chance? Makes sense to me…. You rock …. Amazing how many things I pick up from you…. Sure glad it isn’t a how to do it channel…. Lol 😂 keep up the great work …. Love that extractor
@@TheSoilandGreen well, it’s a good problem and a hard one to, ha, ha, ha!! It keeps me quite busy with a full time job. If I were in the middle of and extraction, I would’ve scooped it up for them. But they get all the wet supers and some of the uncapped stuff when I’m done.
Hi Mike, thank you so much for this review of the HillCo extractor! I believe I will be buying their equipment really soon and knowing that you approve their products is making me feel good about the purchase. Also, thank you for signing the bee jacket I got from Mr. Ed! :)
You are very welcome and thanks for the comment!! I was humbled to sign the jacket and I watched the drawing on that. Thanks for watching and for the support!!
I’ve got a Hillco 18 frame extractor that has proven to be a really nice unit. Have used it for a couple years and couldn’t be happier with it. Dealing with the folks at Hillco couldn’t have been better. I had asked them to call me a few days prior to shipping because my wife and I were going to be traveling the month they estimated delivery. They called me as requested and the unit arrived in excellent condition. They’re great people to deal with.
Thanks for sharing your experience with HillCo. They have proven, so far, to be a great company to deal with and I am loving the extractor. Everyone has had great reviews about them.
Hi Mike. Greetings from Germany! We use a so called cappings wax melter, which is put after extracting on the uncappings tank. He heats the cappings and honey up. The honey drops first, the molten wax lays over it and protects the honey from overheating. Next day, after letting it cool down, so the wax is stiff again, you can just let the honey out and get a big wax plate out of your tank.
Hello Marc!! That’s seems like a very efficient way to get it taken care of. I have a letter, but it’s an entirely separate step. Thanks for sharing and thank for the comment from abroad!!
Mike, We got an order in with HillsCo this afternoon. I was impressed that he questioned something that we were ordering... just, to keep us from buying something that wouldn't work for us. It will work, and it's cool to see them regarding the customer over the sale. Always support the little guy!
Man, that's a nice setup. Gave me stainless envy. lol That extractor is built well, you can tell just by looking at it. I may have to upgrade to that in a few years. I really like that uncapping tank. I need to get one of those. I saw HillCo has one that's far less expensive than the Maxant and about the same size. I like the way the Maxant has castors on it. Thanks for showing us your honey processing setup.
Thanks for commenting!! I’m long time viewer, subscriber, and liker of your channel. I don’t comment much at all, only here and there. That HillCo tank is very nice. The casters were the final selling point in the Maxant, but also, HillCo wasn’t selling anything when I was shopping. John has some really nice equipment at competitive and reasonable prices. The extractor was a great savings without losing the quality. Thanks again for the comment!!
@@MikeBarryBees Hey Mike, Thanks!, and yeah, I like your channel as well. I wish I had more time to watch more of your's and other beek channels. Keep on truckin!
Have you tried the capping bag that you put the capping in and hang in the extractor and spin them out? Hillco has them in his catalog. Extractor looks good.
You know Jim, I saw those when I was ordering my little 5 gallon tank from him and I almost got one. I was so close. But then I got to thinking, how hard would it be to balance that thing? I do want to get one to try though.
I did some research on extractors. I'm new and my harvest will not be big this year. In time, I'll be running at least 13 colonies. After my research, there were several things that I really liked about the HillCo. It will be the extractor I'll be buying. It will be the 9 frame that I will be getting. Thanks for the video, I was waiting for another review of the HillCo brand. You just reaffirmed my choice. Thanks.
Are you asking about the tank I uncapped the frames? I think so. I got it from Maxant, but a more economical and readily available model is available at HillCo Bees
Enjoyed the review. Looks very well made and balanced great. Like the fact it drains well. Thanks for the video. Looks like you got your money’s worth. God bless
Hi Great watch. We are having dramas over here with our bees where with some might that has got into here. It causes the wing to become crumpled so they can't fly🤣
Yes, I’ve have been following that situation over there closely. Unfortunately I think the effort to stop the mites might fall short, but it’s hard to know at this point. I hope they can stop it.
@@odonnellsaussiehomestead8257 exactly. No telling how far they’ve spread thru the feral colonies. Then if it fails, you’ve wiped out whole operations. Although I’m sure there is compensation for the beekeepers affected.
Yep, you were right Roy!! Great piece of equipment. I imagine HillCo will offer some sort of special for the conference and would bring a tank for you. His tanks are just about the same. He'll sell a lot of them and I would have one if he had been around whne I bought mine.
First, Anybody that can uncap a frame that fast doesn't need anything else. LOL Now for the extractor, I only have one issue here is I don't have one on my floor yet. Ha Ha Ha! Great review.
@@MikeBarryBees having just started this hobby this year with my two grandsons, your not how to do it videos are very helpful and helps us out to look for in our two hives. Keep up the great not how to do it videos 🤣🤣. What did you use to wash out the extractor for the first time, I just ordered a three frame hand crank one from Vevor and want to clean it out for the first time?✌🏻
@@markb3129 not sure how the VEVO comes apart, but first hand crank plastic extracted was a bear to pull apart. But I did it because it was too tough to clean with the carousel installed. My 6 frame Maxant and the HillCo are just nuts and bolts to remove the whole top assembly and the remove the carousel. Both easy, the HillCo even easier. But I wait until all extracting is down, then I clean them. I use hot water and dish soap.
@@MikeBarryBees its all stainless with two wing nuts holding the hand crank and cage down, easy to disassemble. Never used it yet just wanted to wash it for the first use Saturday.. dawn dish soap and water it is!!! Thanks Mike ✌🏻
Thank you for the review. I drifted over, too. Your machine sounds like it has a little gear noise. Might want to check the lubricant in there, as I haven't heard that in the other Hillco videos. Might want to ask John about that. But really liked your video. Thanks.
You’re welcome Tony and thanks for watching. That noise was not even close to as loud as it sounded. The external mic on the camera accentuated it. Once I got that sorted you’ll notice it is quieter in the later parts of the video. I am very pleased with this extractor and it has been a pleasure owning. John has really given us a great product.
I think the next piece of equipment I buy is a decapping tank. I had several bottle necks occur. The 600 micron, I have 1 and need more. The tank from John, that is great. I saw that with the filter screens in it. That extractor looks like it runs super smooth. I’m so darn happy you told me get a 9 frame, that machine did great for me. I’ll definitely order more equipment from HillCo.
Well, we texted about it, but for comments sake, I'd say for what you stated on the live stream yesterday about what you wanted to setup on your bench, an easy uncapping system should be a piece of cake, and reasonably cheap too. Glad you're happy with your new extractor.
Yea, you're right. I make candles and such that I sell, and I sell one pound blocks, but once I get to a certain level, sales stop and the rest is mine. People call the honey gold, but the true gold is that wax for hive maintenance....
Mike, You are like a kid with a new bicycle. So happy for you and glad the new extractor it is working well for you! Keep up the excellent videos!! FYI...I also do the PHAT frames...I run 7 Deep Honey Frames in a 8F box so my 7 deeps are about 13% heavier than your 9 mediums.
Yep, I'm really liking it. Still excited when I use it. Yes, the phat frames are the best whichever configuration. Such a honey advantage and much faster uncapping!
Hi Mike - My choke point currently is my uncapping tank. I can only uncap 4 frames and then I have to wait for the frames to spin out before I can uncap more frames to extract. I don't do enough honey to buy a tank like you have but I need to come up with something so I can keep uncapping while frames are extracting.
Actually, I figured out later on that my choke point is the uncapping too. I have the strainers doing better and Jerry DeGroot just gave me an even better tip, so yes, me too on the uncapping being the slow down, even with the tank.
I used a study kinda clear plastic tote, with the latching lid handles too kept the ants out. I drilled a hole and installed a honey gate at the lower far corner of one end. I found a uh send +cleaned) stainless basket from a restaurant deep fryer, and placed it in the bottom. I can lean the frames on it (inside the tote) while I'm uncapping them, and get the cappings to fall into the basket. Scoop up what misses, and toss them in as well. At the end, you'll have a mound of cappings that will drain out into the rest of the tote. When the mound gets too full, I'll transfer the cappings into another, smaller, tote, to further strain / render. When the uncapping tote gets a fair amount of honey in it, I'll shim up the far end, and odd corner, so the gate is the low point. Just filter that honey off into a bucket, and do it again. That's worked pretty well, but now I'm waiting for that 18 frame uncapping tank. You're spot on in identifying your choke points and streamlining them first.
That's some good looking honey right there. I'd be mopping up the spill with some loaf bread! The floor looks clean enough and I hate wasting honey! Glad the extractor worked well. I really like the heated Pierce knife for the medium frames, but you're much faster with that knife. Do you ever pull some of the comb off the foundation in chunks? I've had that happen with deeps, but not mediums.
That's about what I would expect from you Alabama folks....LOL!! I sometimes get chunks, but it depends how fast I go. I don't sweat it, I just keep running along with it. It mostly depends on how thick the honey is and how cool it is. I did two deep supers last night and the caps cut so smooth because it was thinner honey.
I agree with your cutting style mike, I don't have time to be edging the cappings off, extracting is a lot of work, best to let the uncapping tank do some of the work. only think missing now is a wax spinning tank and processing the capping would go much more efficient.
Yes indeed. As far as the wax separator, I know I buy a lot of stuff, but I think that's the one thing I don't want to buy. I see what we make on sales and then invest in equipment. I mean, I want to buy one, but the return on that equipment is not enough at this time. I even gave up on building a steam drum that you and I talked about and have a melting tank now, but I can get multiple uses out of that. The wax separators are just so high. Crazy high. Maybe HillCo will design one of those and sell it reasonable as they do the other items they've made. who know.
Mike, I totally agree with your review. Used my new Hillco Enduro 3/6 frame this past weekend for the first time. I'm only a second year beekeeper so don't have anything to compare it to, but completely happy with the unit. It balanced itself easily sitting on a cement floor. I kept waiting for motor noise that never happened. It was more quiet than a sewing machine. I didn't know how long I could spin it before the motor would have to cool, but it never even got warm. It drained beautifully. Two bolts and the motor and top was off, carried it easily outside, even with a prosthetic leg, and took nothing to clean. I'm totally impressed, and believe it is worth every penney spent. Now maybe next year I can invest in a nice uncapping tank like you have. Thanks for the tour of Hillco's warehouse and their recommendation. It sure worked out great for me.
Great!! Same experience as me. HillCo's tank is a nice one and is priced right. Didn't exist when I got mine, so I went with the Maxant. But HillCo will give it a run for the money, I promise you that.
Migrating over from Mr. Ed's channel, or is "drifting" a better word choice. The honey house work is my favorite. But I am confused. You're already talking in terms of end of season. Is this video material from last year? I would think you would have blooms for quite a while more....
Hello Barbe!! Welcome and glad you drifted over. We are finished with the season for honey, yes. Matter of fact I plan to be over at Mr. Ed’s this weekend to help him extract. We get a fall bloom, but it doesn’t normally yield anything for our honey production. So since there is no fall surplus, we leave that for the bees. As far as hive work, we have some items left to do with them to be sure they are healthy and that we take good care of them since they have worked so hard for us and blessed us with the bountiful harvest, but it’s things like checking in on the queens, monitoring pests, being sure the queenless colonies are combined or requeened, etc. That’s really about it. It is for the most part done. Since I leave them a lot of honey in their brood boxes, feeding should not be required and they should have what they need for the winter with what we leave them and what they can gather in the fall.
@@MikeBarryBees What a generous response. Thank you. Silly of me to not factor in winter stores. Some of my confusion I will attribute to "a Canadian Beekeeper's Blog" which I watch for contrast. If you don't already know, he is a commercial operation in Manitoba. At this date he is just finishing his first round of adding supers. Again, thank you for everything. I love learning and this video was jam packed.
@@barbeonline351 I definitely watch Ian up in Manitoba, as well as Brad of That Bee Man at Faith Apiaries. Definitely some good contrast. It’s what is very interesting about beekeeping. Different goals, sizes, and outcomes based on personal need or preference.
if you havent spilled honey on the ground then you havent been messing with bees long enough.... i think each harvest im prone to spill at least a qt. im planning on preordering one and picking up at hive life in jan
Thanks for the review, this is the one I have been eyeing , i got to see it run empty, but seeing it run full was even better .... now to get some money to afford it.
If you use a simple honey farms slitting uncapper you will almost never clog one of those dual mesh filters. I processed 400 lbs of honey this year and didn't have to change out the filter once. Easier/faster to uncap than a cold or hot knife and gets at the frames that aren't drawn out fully. Only "downside" is almost no wax.
Yep, I know the device well. Jason who made it lives a few miles from here. I had the opportunity to use it when he had a prototype or two, but I never took him up on it. And look at him now. Personally, I don’t care for the particular process with that uncapper. I like have the wax cappings and I process them so I have blocks of wax for selling and frame maintenance. Just a personal preference and not knocking the uncapper whatsoever or saying I’d never use it. It seems to work very well. I know a lot of people like that uncapper and use it exclusively. I could possibly use one later down the road, and it will fit right on my tank, but not for me at this time. Thanks for the comment and congrats on your harvest Matt.
@@MikeBarryBees Nice. Yeah, definitely has the downsides of no wax but for me I'd prefer it that way but I see where you're coming from. I have enough projects as it is. It was a great year for me. Usually I get about 50lbs per hive, this year 100 (4 hives). I've been up to as many as 50 hives but it just got too much for me so I had to back it off to hobby level. I have the maxant 20 but I think i would go with one of these hillco ones if I had to do it again. Much better price and they look quite high quality. Thanks for the detailed review.
Watching you extract is a real eye opener. I need to do the 9 frames per super. I helped a friend with a 20 frame extractor and it wanted to walk across the room even when we stood on the plywood that it sat on and it had weight plates setting by the legs as well.
Yes, 9 frames if for anything are just easier to uncap. I think you get a bit more honey, but uncapping is the main reason they're so nice. That extractor is so balanced it make it easy to balance with the frames.
I was so looking forward for this video and it delivered! I love the concept of that filtering tank you picked up from HillCo. And I learned about PHAT frames from you a few seasons ago and have never looked back, run 7 frames in all our 8 frame honey supers. Hoping this year’s harvest is strong enough so we can pickup one of HillCo’s 6 frame motorized extractors! Thanks for doing what you do Mike!
Glad you enjoyed it! I love the equipment. I search and study what I buy since we all spend so much with this hobby. I have to say, I love all my equipment that I have. But especially the HillCo equipment because of meeting John and seeing his facility. It has a personal touch to it all in my mind.
@@MikeBarryBees John Just moved into a bigger place. I also took my daughter to a beginner beekeepers class yesterday and John donated a complete hive as the grand prize door prize.
Fixing to pull my first honey ever. Thanks for all the great information on how to do it…although I won’t be using all the fancy equipment you have, lol. I have four to five nine frame supers of honey to process and I’m thankful and excited! 🐝
Thanks for another great video!! I have a small 3 frame manual extractor from Hillco that I used this year, and just received their vaporizer, haven't been able to put it to use killing them mites yet but looking forward to trying it out! I have been amazed at customer service they provide!!
Yes, he’s running a great company over there. I look forward to watching him grow. He will always insure great customer experience regardless of how big he gets.
Mike - proof that when you employ top quality tools, you get a superior product. That Maxant is a nice piece of kit👏to clean out your extractor and tank, I definitely recommend the AR630 TSS pressure washer with an Kobrajet hose and MTM short gun. I also recommend a Coxreels wall mounted reel for the hoseThis pressure washer provides heat and incredible water flow . It is a top choice of auto detailers but I definitely think it would be a great solution for your operation. The pressure washer, hose, gun, and reel will set you back about $1200 , but worth every penny
Yes indeed Jeffrey. For the cleaning, I actually do it all inside my little honey shed. I have a spigot plumbed into my hot water heater and I just hose everything down inside. Works well for now and I use buckets to drain the water in and then dump those.
Hi mike I’m looking at buying a larger extractor I ran across you demoing the ultra Question did you notice any sag in the basket cage from the weight of the frames ?
Thanks for another great video Mike! I love Hillco too and am impressed with your new extractor. I have the Hillco 880E 16/8 radial extractor and it works great. It's heavy and sturdy enough that I don't have to bolt it down, the motor handles the load with no problem and is cool & quiet. About the only thing I don't like about mine is the frame holder carousel, which is all stainless steel and is HEAVY!
Grady, the nylon carousel is pretty neat and seems very sturdy. Makes the unit light. I figure if it does have an issue, it's under a 10 year warranty, so HillCo definitely has confidence in it.
Barry I have the lyson vertical sump basically same tank as the hilco just larger add you a heating blanket to the tank , run honey straight out extractor in bucket dump in to sump tank keeps things moving faster heated tank . Just what I do ,lyson tank is 13 gals though so gives little more time god bless
That's an interesting setup. It that a settling tank? I've thought about one of those, but then it's a good size expense. I need to look at that Lyson sump and see what you're referring to.
I ve got Video of it it called vertical sump Betterbee has it only only big difference is it’s larger ,it has a bucket spout at top witch is useless , mike Barry
Watching your videos is getting expensive!!! 😂 looks great, I guess if you've been doing 1500 pounds for years with your Maxant I can muddle through with it until the bees buy me an upgrade. Are you going to expand on the double screen bucket?
HaHaHa!! Yea it can get that way if we get too excited watching good reviews...😁😁😁. Well Dale, I did just that. I just kept pushing thru each year and each season I get one new high end item from the profits. That way I keep the hobby in the black. This year I actually already got my new item and the extractor ended up falling into place afterwards. I have a video already uploaded on the other item, just never posted it, so it’ll be a surprise later on when things slow down.
Great video mike! I was saving all of my honey money for a long hive but I think I may be changing my mind and now aiming for one of those super quiet extractors!
I ordered it late for this season and got caught in the expected backlog. So I haven’t gotten it yet. I did get an update that they plan to ship next week. Really excited to see how it performs for me.
Maybe do not drain the honey out so fast, you should have a lot of room at the bottom of the extractor, it will give a lot of weight at the bottom of the extractor and it will possible help with the wobble. I do have a Maxant uncapping tank as well and love it. Nice setup you have, great job!
Hi Mike, wow your honey extractor is amazing I have a question for you will it take langstroth deep’s as I ran out of supers on some of my hives and had to use brood boxes on a few colonies, my extractor will only take supers so will probably make cut comb or put some comb honey into my jars, none of the other beekeepers at my club don’t use langstroth as they all use British national which for me I think is too small. I definitely like your setup in your honey house Mike and wow your honey harvest you’ve had a great season that’s for sure mate. Thank you for sharing your vlog with us Mike my friend and godbless and have a good day.
Hello Mark, good to hear from you again. Sounds like you had the same issues as me. Yes, this extractor does Lang deeps radially. It’ll do nine. And still nine melange mediums with them. Or 18 mediums.
That is a sweet quality extractor. Hope you beat last year's harvest. I notice your honey as well as the honey we picked up at the Abby is a lot darker than what we get around here near Kansas City. What nectar source gives i that darker color? Have a great week and don't get over heated again.
Hello Phillip. The tallow is usually darker than the earlier spring honey that comes in But it also looks darker in the bucket. Tallow is really a good amber color and that's what I'm seeing. So I guess the answer is tallow. That's what Jeff got at the Abbey too. It can vary from season to season, and of course depending on what else is still in bloom, but for the most part it's consistently amber.
Mike, great video and your new extractor looks good and runs smooth! I’m like you, I get a very big percentage of the honey out of the cappings. I tried a HillCo hot knife about a month ago and tried a Pierce hot knife out yesterday. After 3 supers I unplugged it, put it up and got out the old serrated knife. I do like your knife. Do you know where I can buy one like it? I think I’m finished except for a few supers at my Moody location. I hope you break your harvest record!
Thanks as always Don!! Funny about the knife. Same thing with me and the Pierce. Used it on 5 or 6 frames and it went right back in the box!! Hated it. Just me of course, but hated it. I got my knife from Kelley back when they were around, but it appears to be a 10 inch basic serrated knife. Should be able to find one at a restaurant supply of even something like bed bath and beyond.
@@MikeBarryBees when Kelley’s was the real Kelley’s it was great but MannLake just had to ruin Kelley’s. I had the opportunity to visit Kelley’s and go through most of the facilities in 2016. If I remember correctly they made their wooden ware on site and they had great products!!! I think MannLake shut down the manufacturing of the wood products almost immediately. For now HillCo has the best pine boxes that I know of! It’s always great to see one of your videos and comment with you!
Cleanup isn’t done yet, but it’ll be super easy. All the honey drained out and the disassembly is a screwdriver and a wrench. Deeps do very well radially.
Hello there my friend!! Only one spin. But that one spin takes much longer than the tangentially spun frames. But it is easy being electric. So yes, just one spin with no stopping.
After meeting John at the hive life conference I was certain I would purchase one but after seeing your video and Brian's (Castle hives) video, I'm sold. So now do I go ahead and buy the 18 frame or expect to grow some more and get the 24 frame.
Honestly, if you think you will grow, and I mean you’re serious about it, go bigger now rather than later. Castle Hives Brian said the same thing about a 6 frame, and while I kid with him about growing, I suggested the 9 because he’ll wish he had it later. He said he is so happy he went bigger.
It's a 10 inch serrated bread knife. I will see about showing it in a video, but I shot and began editing videos for the next three, so it will be a while.
Thanks Bernard!! Its a Maxant uncapping tank. I drove over and bought it thru Rossman Apiaries in Georgia since they had it in stock and would save me shipping straight from Maxant.
LOL, Mike I don't even have an extractor, the March 29 swarm grew faster than I expected so I wound up buying a medium super and frames with white plastic foundation at only local place that stocks any bee supplies at probably double the price I could got it from Hillco but I was worried they might swarm so I bit the bullet, then they wouldn't even go up and work it then I remembered one frame in deep was wax they drew out on an old wedge type frame that had nothing in it from my 70's beekeeping days and it was full brood so I an old medium frame and did a cutout stuck in with few rubber bands and took out the middle frame the brood made them move upon this retarded made super and start drawing it out when we had our first big flow and blackberry bloom they started packing the honey in I pulled out the cutout frame and gave it to a nuk I made and the matching comb back in so they draw all 10 frames out uniformly they did and capped 95% of them from top bottom so I pulled out and made a 3" riser then filled it with 10 of the new Hillco deep frames for them to work, long story short I took my wife's offset handle knife and cut wax honey and all back down to the foundation strained it out hung the frames 2 @ a time let em drip out into big bowl then hung in front of my hives letting the bees clean em up and got 2 full gallons of honey not bad for a no extractor rookie 2 n 1/2 frame swarm you told me how catch, we kinda in a dirth atm so I'm feeding them little half to one syrup till the cotton bloom comes in, I got 30 acres of it just across the road and another 50 acres about a 1000' south of me, that with goldenrod flow should pack em full 2 deeps for winter.
How long is your knife Mike? I use an old bread knife also but mine must be a little dull compared to yours. I would say my Hillco 800E is quieter but then its only an 8 frame extractor. Love your uncapping tank but to pricey for me at this time. The Hillco bottling tank, did the honey run through the sieves faster than the round pail sieves? Thanks so much for your time and video. I've learned so much from your channel.
Russell, I am pretty sure it's a 10 inch knife. It is used only for uncapping, so it's pretty sharp. As far as the little bottling tank, it does run a little faster since the entire time the wax and debris is trying to float up and the honey can drain across. Where the sieves that lay flat the debris and wax go against the current of the honey going down. Then the sieves leave a coat of wax on the screens and the tank has the debris always above. So it's a bit faster and doesn't need to be cleaned regularly. It's a nice little tool for straining, but it's still a bit slow. But I can get it full and all the while the debris is rising. And after I let it set, it does well. Appreciate the kind words Russell. We all learn from each other for sure.
I’ve got a year’s worth of videos out since this one. Might need to re-subscribe and re-click the notification bell. I haven’t stopped. Thanks for checking back in!!
@@MikeBarryBees hey I Resubscribed yet I still don’t see any of your newest videos. I seen the cutout video you posted recently but don’t see any other videos. I am beginning to think RU-vid is messing things up . Thanks ! Once this rainy weather stops and we can get some sunny dryer days I plan on pulling my honey . Monday we’re expected to get a strong cold front that might trigger some bad storms . Prince George, Virginia
@@christianshannon3943 that’s strange. I have a video that should post around 3:45, so hopefully it’ll pop up on your notifications. But definitely still here. I hope to pull what honey we were able to get next week myself. Have to go get the honey house ready. Take care!!
Hello Clara. Yes, my HillCo 18 frame does go in reverse, but I see no need in it as they are placed in there radially. I cannot see where either direction is better than one or the other. I’ve heard folks say reversing it gets more, but I don’t see that, and honestly I don’t believe it. No difference, and I’ve seen it done both ways. If there is a difference, it is very little to the point where it’s negligible and not even visible or tangible to the feel. It would be mere drops best I can tell.
No, I haven’t seen any in my bees. And I do look as I inspect. But, I also haven’t been doing inspections since the nectar flow, but the bees I have looked are fine at this point.
@@MikeBarryBees thanks. I've seen DWV in 2 of my hives since pulling honey 2 weeks ago. I'm treating them with 4 rounds of OAV every 5 days. Is there a better way to treat during the summer? I'm in Greenwell Springs, la... it's hot!
@@Springhillshoney The only other treatment I know of that is ok in this heat is Apivar. Did you go ahead and do an alcohol wash to see what kind of load you have. I would see what that is to see how effective the OA is. Since you are seeing the DWV, it would be good to know where your count stands.
@@MikeBarryBees did a mite wash today. They were super high! Tested 3 hives... 19, 30 and 20 mites per half cup of bees. 6-10% mite load. Hope I can get them low enough to make it through.
@@Springhillshoney yea, this is the peak of the season for mites. Just hard to treat them down here with the temps so high at the peak of the mite growth. Hope you get them taken care of. Let us know how it goes.
Back in the day when we rendered lard we used a crackling sqeezer to get more fat out of the crackling. Would a similar "sqeezer" help in the capping box?
Well Gerald, I would think so. I’ve seen, in some videos, a wax press where a screw jack drives down a board into a box and the honey runs out of a hole in the bottom. That wax is in a mesh bag. So it is some like that, although I’ve never seen a crack long squeezer.
