Ariel Rider Grizzly - My other eBike - Mods and Addons

Подписаться 2,8 тыс.

Просмотров 31 тыс.

50% 1

After riding around on my Rad Rover locally, I wanted something that could handle the hills better and keep up with local traffic better.
I went with the Ariel Rider Grizzly and here's an overview video of my bike and what I have done to it so far.
I hope you enjoy this video. If you do, hit that thumbs up button and subscribe to my channel.
Thanks for watching!
Follow me on Instagram - / leswang_
As an Amazon Associate I earn from qualifying purchases. It really helps me if you purchase anything through my paid links:
-----------------------------------------------------------------------
Stuff I use:
-----------------------------------------------------------------------
Grizzly Top Tube Bag Stabilizer - www.etsy.com/shop/LesFishingM...
Grizzly Fender Spacer - www.etsy.com/shop/LesFishingM...
Ariel Rider Grizzly eBike - arielrider.com/products/grizzly
Mixsuper Mountain Bike High Riser Handlebar 31.8mm 720mm 90mm rise - amzn.to/3afsYtn
Seaty Lock Dual Pack - amzn.to/3m6jfZo
Rhinowalk Top Tube Bag - amzn.to/3sPvrAt
Bar End Mirror - amzn.to/3HY4ZLr
LS2 Helmets Rust Glove - amzn.to/3I3gf9b
Pedals (needle roller bearing) - amzn.to/35cEG5O
Phone Mount - amzn.to/34TYOtB
Handlebar Accessory Mount - amzn.to/3gX2YDl
Rubber Insulated Clamps - amzn.to/3HY5uFj
M6 30mm Countersunk Socket Cap Bolts - amzn.to/3LLDiI4
M6 Nylon Lock Nuts - amzn.to/3JHuDEu
OC Cafe Racer Extended Seat - www.occaferacer.com/product-p...
Alarm Horn - amzn.to/3chIR3F
Brake Adapter - Shimano MA-F Disc Brake Mounting adapter 203mm Post to IS Front - amzn.to/3vueQUW
203mm Rotor - amzn.to/3OHtyyV
___________________________________________
Fishing eBike - Rad Rover 6+ - $50 off referral code - rwrd.io/xrq8ufg?c
=Bike add-ons=
Rhinowalk Top Tube Bag - amzn.to/3sPvrAt
Pedals (needle roller bearing) - amzn.to/35cEG5O
Phone Mount - amzn.to/34TYOtB
Bar End Mirror - amzn.to/3HY4ZLr
Bike Alarm - amzn.to/33xFmSD
Paint Protection Film - amzn.to/3p03ODY
LS2 Helmets Rust Glove - amzn.to/3I3gf9b
Folding Lock - amzn.to/36qGLM2
Dual Sport Helmet - amzn.to/3v11nEN
Cup Holder - amzn.to/3I3A1Sj
Rubber Insulated Clamps - amzn.to/3HY5uFj
Handlebar Accessory Mount - amzn.to/3gX2YDl
Light Mounting Bracket - amzn.to/3I6Dlfd
Rod Holders - amzn.to/3s2UvF3
M6 Nylon Lock Nuts - amzn.to/3JHuDEu
M6 30mm Countersunk Socket Cap Bolts - amzn.to/3LLDiI4
203mm Rotor - amzn.to/3OHtyyV
------------------------------
Fishing Setup:
Rod - Lamiglas GSB91LS | GSB 9' L
Reel: Visser No. 4
Line: KastKing Mega8 Braided Fishing Line - amzn.to/3goN2uI
Leader: 30# YYo-Zuri Topknot 30 yd Sinking Leader - amzn.to/3aqG7gB
Swivel - Spro 50# Power swivel - amzn.to/2IAmO6w
Clip - 50# Tactical Anglers Clip - amzn.to/31YD60V
Lure - Daiwa SP Salt Pro Minnow 15cm - amzn.to/3ejZpFu
------------------------------
Kayak Gear:
VHF Marine Radio - Standard Horizon HX850 Floating - Newer version - amzn.to/3192Bxh
------------------------------
Gear:
Fish Gripper - BOGA Grip 60#
Gripper Holster - Turtle Cove Carbon Fiber Boga Holster
Pliers - Danco Premio Offshore 7" Pliers
Waders - Patagonia
Wading Jacket - Patagonia River Salt Jacket 2020
Surf Bag Small - Shimano Bluewave Surf Bag Small - amzn.to/3b0DAqR
Surf Bag - ODM AIO
Surf Bag on Bike - Aquaskinz Tall Surf Bag - amzn.to/3fo40GG
Surf Pouch on Bike - Aquaskinz Small Surf Pouch - amzn.to/3e6DiCb
Boots - Patagonia Tractor Wading Boots with Aluminum Bars
Fingerless Gloves - BUFF Pro Series Fighting Work 3 Gloves - amzn.to/2W2ANYy
Gloves - Stormr Strykr Kevlar 2mm Neoprene - amzn.to/3n2Nmk7
Waterproof Gloves - Patagonia R1 Gloves
Watch - Apple Watch Series 4 (44mm) - amzn.to/2Dplb8J
------------------------------
Editing Equipment:
GoPro Hero 9 - amzn.to/3x9ngAA
GoPro Hero 7 Black - amzn.to/2LmbmgC
GoPro Neck Mount - amzn.to/3dLQmxD
DJI Pocket 2 - amzn.to/2RMTDEW
DJi Mavic Pro Drone - amzn.to/2qkbnK3
MacBook Pro - amzn.to/2MGKBms
iPhone XS Max
------------------------------
Hiking by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3j1jBA6
Music promoted by Audio Library • Hiking - Scandinavianz...
------------------------------

Спорт

Опубликовано:

31 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 147

@LesFishingMoreCatching 2 года назад

After riding around on my Rad Rover locally, I wanted something that could handle the hills better and keep up with local traffic better. I went with the Ariel Rider Grizzly and here's an overview video of my bike and what I have done to it so far. I hope you enjoy this video. If you do, hit that thumbs up button and subscribe to my channel. Thanks for watching! Follow me on Instagram - instagram.com/leswang_/ As an Amazon Associate I earn from qualifying purchases. It really helps me if you purchase anything through my paid links: ----------------------------------------------------------------------- Stuff I use: ----------------------------------------------------------------------- Grizzly Top Tube Bag Stabilizer - leswang.com/shop/ols/products/grizzly-top-tube-bag-stabilizer Grizzly Fender Spacer - leswang.com/shop/ols/products/grizzly-fender-spacer Ariel Rider Grizzly eBike - arielrider.com/products/grizzly Mixsuper Mountain Bike High Riser Handlebar 31.8mm 720mm 90mm rise - amzn.to/3afsYtn Seaty Lock Dual Pack - amzn.to/3m6jfZo Rhinowalk Top Tube Bag - amzn.to/3sPvrAt Bar End Mirror - amzn.to/3HY4ZLr LS2 Helmets Rust Glove - amzn.to/3I3gf9b Pedals (needle roller bearing) - amzn.to/35cEG5O Phone Mount - amzn.to/34TYOtB Handlebar Accessory Mount - amzn.to/3gX2YDl Rubber Insulated Clamps - amzn.to/3HY5uFj M6 30mm Countersunk Socket Cap Bolts - amzn.to/3LLDiI4 M6 Nylon Lock Nuts - amzn.to/3JHuDEu OC Cafe Racer Extended Seat - www.occaferacer.com/product-page/extended-seat-for-ariel-rider-grizzly Alarm Horn - amzn.to/3chIR3F Brake Adapter - Shimano MA-F Disc Brake Mounting adapter 203mm Post to IS Front - amzn.to/3vueQUW 203mm Rotor - amzn.to/3OHtyyV ___________________________________________ Fishing eBike - Rad Rover 6+ - $50 off referral code - rwrd.io/xrq8ufg?c -=Bike add-ons=- Rhinowalk Top Tube Bag - amzn.to/3sPvrAt Pedals (needle roller bearing) - amzn.to/35cEG5O Phone Mount - amzn.to/34TYOtB Bar End Mirror - amzn.to/3HY4ZLr Bike Alarm - amzn.to/33xFmSD Paint Protection Film - amzn.to/3p03ODY LS2 Helmets Rust Glove - amzn.to/3I3gf9b Folding Lock - amzn.to/36qGLM2 Dual Sport Helmet - amzn.to/3v11nEN Cup Holder - amzn.to/3I3A1Sj Rubber Insulated Clamps - amzn.to/3HY5uFj Handlebar Accessory Mount - amzn.to/3gX2YDl Light Mounting Bracket - amzn.to/3I6Dlfd Rod Holders - amzn.to/3s2UvF3 M6 Nylon Lock Nuts - amzn.to/3JHuDEu M6 30mm Countersunk Socket Cap Bolts - amzn.to/3LLDiI4 203mm Rotor - amzn.to/3OHtyyV ------------------------------ Fishing Setup: Rod - Lamiglas GSB91LS | GSB 9' L Reel: Visser No. 4 Line: KastKing Mega8 Braided Fishing Line - amzn.to/3goN2uI Leader: 30# YYo-Zuri Topknot 30 yd Sinking Leader - amzn.to/3aqG7gB Swivel - Spro 50# Power swivel - amzn.to/2IAmO6w Clip - 50# Tactical Anglers Clip - amzn.to/31YD60V Lure - Daiwa SP Salt Pro Minnow 15cm - amzn.to/3ejZpFu ------------------------------ Kayak Gear: VHF Marine Radio - Standard Horizon HX850 Floating - Newer version - amzn.to/3192Bxh ------------------------------ Gear: Fish Gripper - BOGA Grip 60# Gripper Holster - Turtle Cove Carbon Fiber Boga Holster Pliers - Danco Premio Offshore 7" Pliers Waders - Patagonia Wading Jacket - Patagonia River Salt Jacket 2020 Surf Bag Small - Shimano Bluewave Surf Bag Small - amzn.to/3b0DAqR Surf Bag - ODM AIO Surf Bag on Bike - Aquaskinz Tall Surf Bag - amzn.to/3fo40GG Surf Pouch on Bike - Aquaskinz Small Surf Pouch - amzn.to/3e6DiCb Boots - Patagonia Tractor Wading Boots with Aluminum Bars Fingerless Gloves - BUFF Pro Series Fighting Work 3 Gloves - amzn.to/2W2ANYy Gloves - Stormr Strykr Kevlar 2mm Neoprene - amzn.to/3n2Nmk7 Waterproof Gloves - Patagonia R1 Gloves Watch - Apple Watch Series 4 (44mm) - amzn.to/2Dplb8J ------------------------------ Editing Equipment: GoPro Hero 9 - amzn.to/3x9ngAA GoPro Hero 7 Black - amzn.to/2LmbmgC GoPro Neck Mount - amzn.to/3dLQmxD DJI Pocket 2 - amzn.to/2RMTDEW DJi Mavic Pro Drone - amzn.to/2qkbnK3 MacBook Pro - amzn.to/2MGKBms iPhone XS Max ------------------------------

@methatswho582 2 года назад

Hello, I’m new to this ebike and I have a question. I’m also in NY, I’m in Long Island and the city and you mention that this bike comes as a class 2 but you unlocked it to a class 3? So your legit to ride without a license. Can you please explain it for a new e driver please. So I can understand it better please. I would appreciate it don’t want to run in to trouble with the cops. I have a CDL license don’t need no problem with them. I’m glade you send something bc I’m ready to buy. Ariel X class 52V or your grizzly.

@LesFishingMoreCatching 2 года назад

@@methatswho582 dmv.ny.gov/registration/electric-scooters-and-bicycles-and-other-unregistered-vehicles

@BOOSTEDLASER 2 года назад

@@LesFishingMoreCatching Gun to head : Grizzly or Onyx CTY2 ?

@LesFishingMoreCatching 2 года назад

@@BOOSTEDLASER if your staying on road the ONYX. Off road or sand the Grizzly.

@BOOSTEDLASER 2 года назад

@@LesFishingMoreCatching Ty

@williammcpherson9953 Год назад

Watched ah many of these videos on this bike... Must and will say this is the best one. No drama. No over the top. No begging for likes. Just schooling. Thanx brother. You did good. I'll be looking for ya from now on.

@MrIanWebb 2 года назад

This is the cleanest grizzly mod ever. Nice work man.

@LesFishingMoreCatching 2 года назад

Thanks!

@bkanegson Год назад

Got Les' front bar mod, and it works great to solve the Grizzly issue of no flat surface for top mount storage bag, which tends to roll over without it. Fits great, light weight, does the job. Thanks Les! (And I would add, customer service was immediate and thorough when a shipping issue popped up. Happy customer here!)

@jpmyles1560 Год назад

Looks good . Love the handle bars

@mr.smiley4569 2 года назад

Beautiful bike. I love the seat better then the rad bike.I’m gonna have to get me one. Great for Fishing and in city travel. Awesome video Salute👊🏾

@sgthoskins Год назад

Great video Les, thank you for doing it.

@LesFishingMoreCatching Год назад

No problem. Stayed tuned for my brake light turn signal mod video.

@mackmcmillan9905 2 года назад

I ordered one a day ago... I love the wrap taking some of the badging down a few pegs... I've de-badged a lot of my vehicles, so the clutter of a hundred logos is a mild annoyance. Seems an easy fix!

@jjansendavid Год назад

Amazing job with the mod bro! Super jealous

@markwebb6593 Год назад

Love your bike. Excellent mods and very tastefully done. I'm highly considring this bike. I don't think you can still get that longer seat when ordering it, but there is a seat extension type pad that runs around $89 for the extension. Thanks for putting links to your addons! Great job!

@LesFishingMoreCatching Год назад

Thanks. Once you master the awd the bike is really great. Has good acceleration. The seat is custom by OC Cace Racer on Etsy.

@donvee2000 2 года назад

I like the handle bar you added. I'm not happy with the rise, I find it to high as well. Otherwise i love my rider. It's the most fun I've ever had on a bike. I know they're are more powerful bikes but not in this price range. Im ride it to work everyday. It's 10 miles each way with plenty of steep hills but it handles it no problem problem what do ever. I put my cup holder on the side of the fork.

@LesFishingMoreCatching 2 года назад

Nice. Check my website if you want to purchase a bottle holder mount.

@brandonboss6868 2 месяца назад

I purchased a 14k lumin light off Amazon on sale for 26 bucks, which lasts 5 hours on low which is still insanely bright. Abd 3 hours with high and low together. Imma have 2 of them to switch them out.

@jayjames3926 Год назад

Very nice after the mods

@LesFishingMoreCatching Год назад

Thanks. Stayed tuned for Part 2. Dropping soon!

@jayjames3926 Год назад

@@LesFishingMoreCatching You got it! I subscribed. I have a Huck Stinger 3000. I love all ebikes.

@tommcgill1671 Год назад

Excellent content, Video running the Grizz in the background, super cool. The "motor disengage" cover on the right side below the throttle, is absolutely brilliant. Are these for sale? I have whiskey throttled too many times. Also. perhaps do you have plans for 3d printing another "cover" for the rear motor all left, both center and front only all right button. I have had a few issues with gravel/dirt/moist ground and have been caught in dual and or front only motor. A bit alarming, hit brakes and think is this insane or maybe I'm a bit of an idiot. anyway, thank-you and liked/subbed. I watched part 1 and 2 checked out your AMZ link. Ready to purchase just point me where.

@LesFishingMoreCatching Год назад

Thanks. I downloaded that file off thingiverse and cannot sell it due to it not being my design. I may design my own and also since you mentioned it maybe a cover for the drive selection also.

@akdrumster Год назад

appreciate this vid as I'm awaiting my Grizzly and keen to swap out those bars. very nice bike & great upgrades, 'tho it appears you "went" from (stock) high-rise to low-rise bars, needing to reach down; similar to motorcycle drag bars. THX

@LesFishingMoreCatching Год назад

Thanks. The bar height suits my riding style which is from Mountain biking. All my bikes you reach down the Grizzly I was reaching straight out. Also the lower bars help keep weight in the front down which is important to keep the front wheel from spinning.

@akdrumster Год назад

hi, thanks for the reply. I'll prol go with tad taller bmx type bars. ...anyway I do like how you "blacked out" sections of the bike (specially the battery)...appears you have a rather steady hand wrapping the bike & plan to do (about) the same. you reckon a 2x20 roll will allow me to wrap the tube(s) properly? incidently, I found this on AMZ & reckon it's similar, yet less expensive wrap: Spurtar Gloss Black Vinyl Wrap. Thanks again!

@LesFishingMoreCatching Год назад

@@akdrumster amzn.to/3F22HvL

@VaranusVideos Год назад

Bike looks amazing well done video and 3dmods. I'm getting one but my question is how's the customer service? And have you had any issues since this vid.... I've heard a lot of complaints about quality control and wiring issues. Just asking before I drop 3500 on something. Thanks!

@LesFishingMoreCatching Год назад

Personally I haven’t had any issues with mine but I have read on the Facebook group and know a person who had error code but got new replacement controller on his v2 in like a week. The v3 don’t have motor connectors and a few other things changed to supposedly make it more reliable. I also don’t weigh as much as other riders so maybe I’m not pulling as many amps. Also new v3 comes with one charger for both batteries where v2 it was two chargers and different Connectors. So could be pro or con depending on how you use it.

@brandon7219 2 года назад

I see that lian-li o11 dynamic

@LesFishingMoreCatching 2 года назад

I actually just parted it to sell and moved the 3080 into my dedicated mining rig. I still have two other ones with the bitspower liquid cooling in front. Nice cases but large. I still got my All Aluminum Lian Li from 1999.

@seminolerider 2 года назад

The seat looks nice! I have been contemplating if I should buy a larger seat (I have the Ariel Rider X Class.), but I don't know if it will be useful other than providing space for another rider.

@LesFishingMoreCatching 2 года назад

It’s slightly stiffer than stock. It is nice to be able to sit back further sometimes too. I do want to look for softer springs or suspension next since I’m a lighter rider.

@seminolerider 2 года назад

@@LesFishingMoreCatching Okay...thanks!

@bradl45 2 года назад

Thanks for all the links and sharing your build with us!!!!!!!!!!!! How are the battery's set up? Do they drain as one unit or are they wired one battery to one motor? I've been looking for a longer seat, HUGE thanks for that link(I haven't ordered a Griz yet, maybe SOON)

@LesFishingMoreCatching 2 года назад

I’m pretty sure the batteries run in parallel cause if I only use rear motor on my ride both batteries will need to be charged still and they seem to take about the same time to charge. The rear is 20ah and front is 15ah.

@bradl45 2 года назад

Thank you!!

@Nohkral Год назад

How much for the 3d printed throttle cover?

@ucitymetalhead 2 года назад

I bet someone at ariel rider is miffed that you covered all of their logos. 🤣

@LesFishingMoreCatching 2 года назад

I made up for it by advertising their bike on my channel. 😝

@9LineMusic 2 года назад

👊😎👊

@Sharrieftv 2 года назад

Where can I upgrade seat cause the one that comes with it sucks I love the one yours an how do you install it ,

@LesFishingMoreCatching 2 года назад

Occaferacer.com

@abefehr6155 Год назад

Have you thought about possibly making saddle bag mounts?

@LesFishingMoreCatching Год назад

The rear rack can hold saddle bags that I added.

@scottp7587 7 месяцев назад

everybody uses the super 73 tires but heard they slow you down don't know for sure.

@LesFishingMoreCatching 7 месяцев назад

They def are heavier so rotational weight is added but they are a slightly larger diameter so once you reach top end they are maybe slightly faster. I like them cause when I’m in dual motor the heavier tire prevents the front from spinning out of control. Also the speeds I’m going the knobbies are fine on the road and they aren’t that noisy at all. When I go Offroad I have the confidence it will hook up.

@savagemako17 Год назад

What did you do with the extra control cable length and other assorted gear when you replaced the bars? Isn't there a lot of excess cable with the lower bars? The bike looks great!

@LesFishingMoreCatching Год назад

There wasn't much extra cabling. I moved all the stuff to my new bars or the accessory bar I added.

@thomascarpenter2885 10 месяцев назад

@@LesFishingMoreCatching when you replaced the bar, were you able to use the bar mount that came with the bike or did you need a different stem?

@LesFishingMoreCatching 10 месяцев назад

@thomascarpenter2885 used the stock stem.

@amandalee7267 2 года назад

Where did you buy your long saddle? I want to buy one in the future. Please advise and thank you!

@LesFishingMoreCatching 2 года назад

OC Cafe racer on etsy. www.occaferacer.com/

@DJDAVIDD Год назад

What light you use and is it bright. I do food delivery on this bike in La 91744 on grizzly yellow v3, is a beast and hella quick acceleration.

@LesFishingMoreCatching Год назад

I have the Polar Bear light now. It’s much brighter than v2 stock and has low and high or halo only. Also it doesn’t blind drivers cause it’s a focused beam.

@LesFishingMoreCatching Год назад

Check Part 2 video I think the link is there.

@bostongiraffes 2 года назад

is that the stock screen, love i wish they will put on my kepler

@LesFishingMoreCatching 2 года назад

Yes stock

@richardmaxwell4489 Год назад

I'm not sure if I should buy one as I get severe back pain lower back every once in a while, I'm 65 hate to buy it, and then want to sell it.

@LesFishingMoreCatching Год назад

Sorry to hear about your back pain. Maybe you should use the money to figure or help your back pain first before you get a bike and ride.

@RealSlom 2 года назад

Could you please let me get information about stem...? I read your description that you left information for each stuff. I was not able to find out the name of stem that you used in your bike with Mixsuper handlebar.

@LesFishingMoreCatching 2 года назад

I reused the original stock stem since the bar diameter is 31.8 also.

@RealSlom 2 года назад

@@LesFishingMoreCatching I really appreciate you to let me get information indeed. Actually, I don't have Ariel Grizzly right now. Therefore, I don't know precise information about the bike. I just ordered it before couple of days. It will take almost 1 month up to Korea. I just would like to ready to play with Ariel after changing handlebar :) You meant the original stuck stem is compatiable with handlebar that you bought 31.8 diameter. I will buy the same handlebar as you.

@raypabs5374 Год назад

I live on Long Island, NY and want to ride my Grizzly in NYC next summer. Are you pretty sure that our dual 1000 watt motors are legal in the whole state?

@LesFishingMoreCatching Год назад

Up to class 2 in suburbs and 3 in city but with some technical limitations the Grizzly didn’t incorporate. But from what I’ve seen and heard they ain’t gonna bother you on a Grizzly unless you running lights and being stupid.

@raypabs5374 Год назад

@@LesFishingMoreCatching I have a motorcycle and commercial driver's license. I'm afraid to get a moving violation for having fun on my bike toy.

@LesFishingMoreCatching Год назад

Best to contact someone that knows more about ebike laws if you want to be safe and 100% legal.

@kyleborneman6131 Год назад

Hey Les just curious on where you got your wrap?

@LesFishingMoreCatching Год назад

Amazon just cut squares and wrapped around.

@kyleborneman6131 Год назад

How many square feet of wrap did you need

@milleringram2675 Год назад

What about the headlight? Where did you get it from?

@LesFishingMoreCatching Год назад

That’s in the part two video. Got it off eBay. Links in description.

@DriverJ-N 2 года назад

Why does it have dual suspension on the rear? Looks? If anyone knows please let me know

@LesFishingMoreCatching 2 года назад

Bikes can be made with a single or dual rear shock, it's up to the designer. That being said this bike can carry an extra passenger and with only one shock it would bottom out easily.

@DriverJ-N 2 года назад

@@LesFishingMoreCatching oh understood thanks 🙏

@GoldenPlatinum7 Год назад

Hope you can still see this but would this e-bike be recommended for doing food deliveries in the city ?

@LesFishingMoreCatching Год назад

If definitely would be fine for that if you add a rear rack.

@LesFishingMoreCatching Год назад

Also make sure you lock it up and don’t leave it unattended.

@GoldenPlatinum7 Год назад

@@LesFishingMoreCatching thank you so much and would you say the battery can last a whole day ?

@LesFishingMoreCatching Год назад

50 miles range

@ellobo1326 2 года назад

Seems like a decent bike. But I’ve seen many comments/reviews that say this companies customer service is horrendous. That scares me as a potential purchaser.

@LesFishingMoreCatching 2 года назад

I haven’t had any issues and I hope I don’t but the newer v2s seem to be more reliable. I’m sure the shortage of parts doesn’t help right now. RadPowerbikes has great customer service but they also have a shortage of parts.

@louietramposch4559 2 года назад

🙇‍♂️☝️🤟👽🚲

@johnnya568 5 месяцев назад

I am 5’6 Do you think my feet could touch the ground?

@LesFishingMoreCatching 5 месяцев назад

Yes but if you upgrade the tires to larger ones and get a stiffer seat you might find yourself on your tip toes.

@fishermansmobileweighstati3645 2 года назад

Would this ebike or any of the others you've tried work in soft sand? E.g. the walk from we2 parking lot to the beach.

@LesFishingMoreCatching 2 года назад

Yes but the larger the tire I have 26” the better. You would have to air down to like 10 psi and the lighter you are the better.

@fishermansmobileweighstati3645 2 года назад

@@LesFishingMoreCatching Thanks. Something for me to consider.

@paulcrocker818 Год назад

GRITTY SAND CREATS MOVING PARTS DEMISE...WASTED ENERGY

@LesFishingMoreCatching Год назад

Tell that to the dune buggies and desert riders. Lol

@phukit5456 2 года назад

Do the batteries have usb ports?

@LesFishingMoreCatching 2 года назад

No but the display does but only charges when the bike is powered on. My Rad Rover 6 Plus has add on USB ports and they stay powered on all the time.

@richardmaxwell4489 Год назад

Can you tell me how comfortable the seat is as I herd the stock one is terrible.

@LesFishingMoreCatching Год назад

The aftermarket OC cafe racer seat is stiffer but longer. The stock seat was short but softer. There’s other companies that make seats that are softer. JB seats is another maker. I rode bmx bikes with plastic hard seats growing up so this is fine for me lol

@richardmaxwell4489 Год назад

@@LesFishingMoreCatching Thank you for the information, I’m getting ready To pull the trigger on the Grizzly.

@LesFishingMoreCatching Год назад

It’s a good bike if you plan on keeping the stock power system. Has a good balance of range and power/torque to go up hills and keep up with local traffic if the speed limit is below 35. Also can pedal it and shift it to lower gears if you need more climbing power for steep terrain.

@allbedat4 2 года назад

Did you take the bike down to the frame to be able to vinyl wrap it?

@LesFishingMoreCatching 2 года назад

No just cut small rectangular pieces and wrapped around etc.

@allbedat4 2 года назад

Awesome. Thank you. Bike looks great

@allbedat4 2 года назад

@@LesFishingMoreCatching What size nut and bolt goes through the bottom of the top tube stabilizer? Basically anything that fits snuggly through those holes?

@LesFishingMoreCatching 2 года назад

I include the nuts and locknut but I made it to use m5 12mm and fit the lock nut.

@allbedat4 2 года назад

Shoot I received the order but didn’t see the nut and bolt. Maybe I didn’t see them in the packaging. No biggie either way. I will go out and buy them. Thank you.

@samanthaalessi5001 2 года назад

Just caught my pb bass at 30 pounds all thanks to my big catebike....

@LesFishingMoreCatching 2 года назад

That’s awesome. Congrats!

@kdscrapping4452 2 года назад

Won't ship to Canada , Bummer !!

@LesFishingMoreCatching 2 года назад

That is.

@madanidoni7314 Год назад

I live in Algeria, is there delivery here?

@LesFishingMoreCatching Год назад

Are you asking if Ariel Rider ships bike there or if I ship my parts there?

@teamwinning4995 8 месяцев назад

Do you have the adapter to the throttle shut-off? I always find myself accidentally pressing the shut-off button

@LesFishingMoreCatching 8 месяцев назад

Are you asking if I sell the 3D printed throttle button cover?

@teamwinning4995 8 месяцев назад

Yes

@teamwinning4995 8 месяцев назад

I purchased the tube bag stabilizer from you on Etsy

@LesFishingMoreCatching 8 месяцев назад

@@teamwinning4995 I’ll get one up in the shop asap. Yeah I kept hitting mine accidentally and it would disable the throttle got annoying. Ever since I put this on. Haven’t had that issue.

@teamwinning4995 7 месяцев назад

Ok, good! I’ll be looking out for it.

@Maber01 2 года назад

Be careful when modifying your Grizzly. I have an error code 30H and have been exchanging emails with AR for about a month, and the only thing they have figured out is that the Wicked Thumb headlight I installed has voided my warranty. So, I spend $3,500 on a bike I used for 3 months, and we still don't know what is wrong with my bike, and I will be paying for the parts. I will never buy another e-bike online. I wish I had bought a bike from a store that can fix it when it breaks down.

@LesFishingMoreCatching 2 года назад

Yeah I haven’t done anything with the wiring it’s all just wrapping and bolt ons. My general rule of thumb for cars and stuff like this is don’t mod engine or wiring until warranty is up. I hope you get your situation resolved. Thanks for letting me know.

@syberphish 8 месяцев назад

@@LesFishingMoreCatching You voided your warranty the moment you changed the seat.

@LesFishingMoreCatching 8 месяцев назад

Well good thing I didn’t need it. My bikes out of warranty now.

@syberphish 8 месяцев назад

@@LesFishingMoreCatching I was considering putting a new seat on mine after the first 200 miles and I had been emailing one of the techs at AR at the same time and mentioned it to him. He said some people have cooked their controllers from seats that don't allow enough airflow to them, so changing the seat will void the warranty unless you use THEIR seat. Having already had a warranty battery repair done, I'm hesitant to void the warranty purposely till it's past. How long have you had your Grizzly now? How many miles do you have on it?

@alreadylucrative4941 2 года назад

Link for 203mm Disc & adapter 🙏🏾

@LesFishingMoreCatching 2 года назад

Shimano MA-F 203mm Post to IS Front - amzn.to/3vueQUW

@alreadylucrative4941 2 года назад

is it the same adapter for the back breaks?

@LesFishingMoreCatching 2 года назад

@patrickstroup9347 2 года назад

Bit confused ... is this a grizzly v2 .. is there 2 grizzly bikes?

@LesFishingMoreCatching 2 года назад

Yes this is a Grizzly v2 that I modified. The v1 was sold up till mid 2021 then 2022 the v2 are all they sell now. Few changes.

@cacogenicist Год назад

@@LesFishingMoreCatching - Now they are on a V3

@LesFishingMoreCatching Год назад

Yes the v3 has a few revisions to it and includes only one charger for both batteries now.

@theoriginalzach4340 Год назад

@@LesFishingMoreCatching(might be a stupid question), is that good or bad?

@TheReman5000 2 года назад

what part of NYS? ✌

@LesFishingMoreCatching 2 года назад

North shore Long Island

@TheReman5000 2 года назад

@@LesFishingMoreCatching oh nice, im in Buffalo......happy riding

@hectorperez2560 Год назад

Ariel Rider sometimes act funny specially when something goes bad with their 3.400 bike I wonder why. 🤔

@VietPho 2 года назад

does that ride on sand?

@LesFishingMoreCatching 2 года назад

Yes and very fast.

@LesFishingMoreCatching 2 года назад

However I wouldn’t use it for fishing. It’s got small fenders and sand will fly up everywhere and I prefer the rad rover 6 due to the larger tires and carrying capacity.

@VietPho 2 года назад

@@LesFishingMoreCatching I removed my front fender on my grizzly because it keeps hitting the tire. Let me know when you find any custom fenders that work with the grizzly that wont bottom out. Thx

@LesFishingMoreCatching 2 года назад

I printed a spacer that corrects that. Buy one off my website and lmk how it works out.

@DeFiDuke 2 года назад

@@LesFishingMoreCatching Hi I'm curious about that, the dual motor seems to be the key to riding on soft sand - are you sure the single motor rad rover 6 will work better in soft deep sand? I'm an ocean lifeguard and need something to get through the flats.. thanks

@BOOSTEDLASER 2 года назад

very low audio

@LesFishingMoreCatching Год назад

I used the DJI osmo wireless clip on mic. There’s no wind. Background noise and everything i clear and I check the audio output levels as not to peak. Turn your volume up or lmk if you need help looking for something to increase your audio volume.