ARKON Roosevelt 24x14 -81 | 2014 RAM 1500 

There's always a possibility if there is enough demand for it. Otherwise, we've seen people just re-powder, or repaint the wheel all gloss black.

@@ARKONOFFROAD should do a test run. I’d buy it. Not a fan of the milled look.

Should be able to fit with slight rubbing in the rear at half to full lock, also that’s running low profile street tires, but for sure with 14 wides you’ll rub, I have 22x10’s on my ‘22 ram with 305/40’s which is like 12.5 inches wide on a 3 inch level and they rub at full lock, with 12’s or 14’s I’m 100% sure they’ll rub

This truck is sitting on a ProRyde Adjustable leveling kit with 3” struts bit.ly/3c2vfqn

I’m trying to put 24x14s on 35s on a 1500 shorty with a 3 inch lift do you think they’ll fit

What truck are you looking to run them on?

@@ARKONOFFROAD 2015 Ram 1500

They are a 33x13.5 AMP Mud Terrain

A six inch lift would get you there with minor plastic trimming www.arkonoffroad.com/wheel-offset-gallery/984031/2011-ram-1500-arkon-off-road-lincoln-zone-suspension-lift-6in

​@@ARKONOFFROADdoes it have to be 4x4

20 mil para aribba si tiene menos de 100 mil millas

It is on a 3" level

He did not trim, but it rubs like crazy like this. With a NorCal and bumper cut it would be a little better, but overall could use a lift

@@ARKONOFFROAD thinking about getting these if I get a 6 inch lift should I be good

10 inch

22x12 is the next size down in those particular rims

Yes he has his bumper cut, could use a Norcal Mod, but still with no lift on a 14 wide you will have some rubbing. A lift would still be nicer to have for full turning radius

@@ARKONOFFROAD Can you recommend a minimum lift for no rubbing? 4"?