Got this Cannon 3 weeks ago and haven't used it yet, good to know it's going to work well. I bought mine in Canada from Canadian Tire for $59.99 that would be about $45 usd. But mine came with a pint sized bottle of ArmorAll Snow Form with the Cannon as a kit.
Great video bro. I would be very careful recommending using the smaller orifice insert unless they have a cheaper style pressure washer. The higher end larger gpm ones will burn the engines up using that orifice. Just a heads up.
I had this foam cannon and it worked great for maybe 1 summer. Then the top would get loose and the container would fall off. Apparently it is a common issue and a lot of people complain about it. It's like the plastic loses it's grabbing threads over time.
Same here, I have this same issue. Wouldn’t recommend it for all the time use. Container would tend to fall off the head and spill all the soap which is an annoying feeling. Couldn’t fully tighten either because of the plastic crossing over the thread. Creates a lot of foam though.
Armor All have probably the best streak-free glass cleaner. Even in direct sunlight, it will flash right off where more "premium" brands will streak without doing a second wipe
aye man, ive been watching a lot of your videos and straight up you have helped my detailing flow and process and even pointed me toward great products. Thank you for your content
My Armor all cannon is of a drastic different design in that there is a black insert in the tube that doesn't allow for any adjustment and I tried it with my 1900psi 1.2gpm Ryobi PW and no matter what I tried in terms of adjustment combinations and increasing or decreasing the soap to water ratio I couldn't get it to produce anything beyond very runny foam that didn't adhere at all well to my vehicle. My Armoural foam cannon is most definitely not the same as the one in this review and unfortunately I bought it based on this review. I have since returned it and bought a MJJC foam cannon hope it works as advertised
Just ran into the same problem. Bought the Armor All cannon and the orifice replacement only to discover there is no orifice nozzle inside after removing the connector. I guess Armor All changed their design. Very frustrating after spending all the $$ for it.
Just got this one and saw a big difference then the POS one that my pressure washer came with haven’t changed they orifice yet but looking forward to the shaving cream thick foam thanks for the content you put out
Heads up for 2023 shoppers - there's also now a "two in one" version that supports both pressure and hoses, but the fan is not adjustable, nor can you swap in a 1.1 orifice. O'reilly (at least mine) still has the right version.
Mornin Josh! When I first saw this on social media I searched high n low for it. I even reached out to Armorall directly. I could never find it so I quit looking. Now I'm pressure washerless...😂😂... cant do it now... BTW Josh, Armorall's new Ceramic glass cleaner is pretty good and their Glass cleaner in the clear bottle is good too. Take 'r easy Josh👍
Bought this canon and added the 1.1 orifice.I used Meguiars Ultimate wash and wax, Jay Leno's garage and Chemical Brother's Sticky snowball and the winner was Meguiars, Jay Leno close second. Josh was spot on. I was excited to try the Sticky snowball and it didn't come close to the other two. Very happy with Meguiars Ultimate. The cannon and 1.1 orifice was only a $32 buy and I'm satisfied with the results.
I'm sure you saw a few weeks or so ago I posted about this one on one of your other videos. Less than $30.00 bucks at Menard's around me. And the measurements on the bottle are in the useful measurements of ounces at least here in the US and they're very accurate. Holds 40+ ounces. Unfortunately the twice as expensive and then some MJJC doesn't have ounce measurements on the bottle.
i have the same one....im not an expert but it seems fine to me and i use it on my boat, wifes Tahoe, truck and 4 wheeler. it only cost like $39.99 at O'riellys a year ago here in Alaska.
I just bought an Armor All one from Lowes today that was $40 thinking it was the same as what you got here. Apparently what they sold was different than this one, it doesn’t have an adjustable nozzle, and it straight up sucks ass. It produces foam almost no different than a water hose powered foam gun. If you see a 2-in-1 Model of the Armor All foam cannon, it’s a complete waste of money.
Also price for the armor all foam cannon is higher then stated even when I have found it alone I use the Mjjc foam cannon with the 1.1mm on my ketchers pressure washer works great
this looks like a great product I've read that you can use this foam cannon with just a hose pipe have you tried it that way is it still just as good I'm guessing not as thick foam
thx for doing this review! Do you know if the nozzle can be taken off to see if a filter can be placed in there or replaced? I'm wondering how the armorall cannon would work with the three layer filter.
This foam cannon with 2 bottles soap kit for $29 at amazon. I just got my mtm kit(foam cannon & washer gun) and also griots brilliant finish(which will be returning) delivered today. Do they worth that much money over this Armor all foam cannon?? I will be using with my $599 Ryobi 40v 1500 psi whisper series delivered last week(bought after watching your review on older version)for my car washing for weekend hobby.
I bought one of these after watching this vid. I am using Adam's Polishes Car Wash Shampoo in it. I got very little foam compared to this demonstration. I have a Ryobi 1800 PSI 1.2 GPM Cold Water Corded Electric Pressure Washer pushing it. Any Ideas what I am doing wrong. I do have very hard water but I adjusted the nozzle as demonstrated. Thanks in advance.
Great job on the videos. Question. If u don't use Armor All products. What do u use ? I'm starting my business and any advice would be greatly appreciated
I have used other foam cannons where the clear hose in the bottle never sits at the bottom and you can hear it shift around if you shake it. The Armor All foam Cannon sits right at the bottom of the bottle no shifting around I was wondering if it was actually picking up enough of the solution. Does yours sit right at the bottom to the point you can see the hose from underneath almost as if no fluid can pass through? Was thinking of slightly cutting mine.... Sorry for the long comment🤕
I have seen you test a foam cannon on a cordless power washer, and obviously those have lower PSI/GPM ratings. Do you know if there are smaller orifices for better foaming on a power washer? Like maybe a 0.9mm?
Just purchased the Armorall foam cannon. What am I doing wrong? I get NO foam. Using Husqvarna 2K pressure washer, 1.1 orifice, Chem guys Mr Pink soap. Knob turned down No foam
Not sprayer related question here. What was the thinking that went into that EMT pipe on that wall? As a retired electrician who spent over 20 years piping homes in Chicagoland glad pipe was used but why the roller-coaster .
I have a pressure washer I know I need the cannon . The wand is that different from the pressure washer gun or is it the same thing, I have the gun that comes with the pressure washer
Nice review. I have a question what do you suggest for a hose I just bought a pressure washer from Costco 3200 PSI but not sure what kind of hose to get . I know you mentioned the flex Zila and another brand but I notice it’s for up to 3100 PSI . Can you help with any suggestions thanks .
Hey! just bought this foam canon, but I ran into the issue using a 1900 psi simoniz pressure washer. Im not too knowledgeable on what adapter I would need to connect this foam cannon to the simonz pressure washer gun. Any help would be appreciated
Great video series - Thanks!! So you've mentioned 1.1 orifices several times - got it. Where do you order them, directly from the mfg of the foam cannon? Are they universal or cannon specific? Thanks
So I've only used this pressure washer one time. ru-vid.comUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.
Hey Josh, I bought the Uber flex 50' hose to go with my Green works pressure washer. Since using the hose I've noticed that my pressure washer will not hold the pressure. Does length of hose affect that?
I bought this josh if I install 1.1 orifice in cannon will it burn out my pressure washer?I have a cheap sun joe pressure washer doubt no more then 1.2 gpm
Can you send me one of your 1.1mm orifice? I tried ordering two off ebay and got screwed with getting sent more 1.25 mm orfices and now I'm scared to order anymore online anywhere else just to get screwed again