Armorsuit cellphone screen protector, military grade? - DIY install.  

This is BY FAR THE BEST phone protector made. My phone drops often. Once it smacked into a wall...and my screen stayed intact. I refuse to use anything else.

Great video, super helpful. Got mine on with zero issues. I will tell you this tho, I found that using my thumb to smooth out the curved edges worked really great. I was able to get the screen protector flush to the curves pretty quickly just by using my thumb. Still, I gotta say that this video was super helpful and got me started. Thanks a bunch and big thumbs up!

I have used it on my Note 9. Dropped phone all kinds of ways and protection is FABULOUS

I've used them in the past..I dropped my phone directly on the screen,no case..I thought it was a kill shot, but to my surprise there was t even a scratch on the screen..the fall was from about 4-4 1/2 ' str8 to concrete!. I highly highly recommend these

Screen protectors don't "protect" against drops, if you're screen is gonna break then it's gonna break but what the screen DOES do is mitigate shattering and jutting pieces of glass when your device takes a direct hit. It doesn't absorb kinetic energy and is not shock proof so your screens aren't gonna avoid a break just because of a screen protector. Screen protector are only ever for scratches. Never for drops.

Hey Jeff, I just watched your video as a reminder on how to properly install the ArmorSuit. You did a great job. You asked if I had used ArmorSuit before. The answer is yes, on several different phones over several years. I'd guess I probably started using ArmorSuit aroound 2010, and on at least 6 different phones. My last phone I had for probably 4 years. The only issue I had over all that time was somehow the armorsuit had gotten peeled up a bit, and dirt and dust got on the bottom side. I reached out to the good folks at ArmorSuit and as you stated, the replaced it free, no shipping fees either. I have recommended ArmorSuit to all my friends and family members. I will say, if they don't listen to my suggestion, well it's their own problem. lol I will say, with my new phone Samsung S21 Ultra, it would have been nice had ArmorSuit included the instructions for how to install the camera lenses and carbon fiber protector. I have asked ArmorSuit to email me the instructions. Thanks again for such an awesomely done video.

I’ve always preferred these screens over glass screens

This is the only type of screen protector I prefer. As you mentioned, I had ZAGG glass and was replacing it at the cost of this protector! Used it on Note 9 and now first time with this company on Note 10+. Had nanotechnology self-healing protector on it for 4 years.

Thank you...I followed your directions and I'll let it sit as is suggested.

Hello Jeff. I've used this brand's covers on my Galaxy 7+ and 9+ phones in the past, now adding it to an A42 5G phone. I find the Armorsuit protectors are of a higher quality than other plastic-shield brands that I've purchased over the years. I'm not a fan of the glass screen protectors; sometimes they don't transmit the touch action to the phone. Yes, they do a better job of protecting the screen but if your touchscreen isn't functioning at 100%, that's a dealbreaker. I personally recommend this brand (no, I'm not getting compensation of any kind for my comment. I'm just a retail customer.)

Thanks for the refresher. I've been using these for all of ours devices for years. On the rare occasions that it's not available at purchase time, I just leave a screen unprotected until it is available.

I have used Armour Suit screen protectors since the S8 came out and I now have one on my S10+. These screen protectors are the best because they last. I just had to replace my protector after 2 years because the edges got lifted when I was mowing my lawn and dust got in and it wouldn't stick anymore. I highly recommend this product to everyone I know. I even have one on my fitbit.

Thank you! Great tutorial. I put my new screen protector on last night and it went very well!!! I DO have some bubbles at the top... Hoping they will go away in the next couple days. I've had this brand before and liked it. I just got the S22 ultra and am loving it. I loved my S20 Ultra too!

I have purchased these on several types of phones that I have purchased. Love the fact they protect my phone and don’t need to worry about cracking my screen. I drop my phone a lot cause of my carpal tunnel, ughh.

Only protectors I use I mess everything else up, best tutorial yet! I used my shrink wrap gun and fixed those edges finally.

Oh my goodness, thanks for the hairdryer trick. I was having that issue, and it was very annoying. Thank you so much.

Great video. I prefer glass over this. The options are limited for the Google Pixel 6 Pro. The fingerprint sensor doesn't work with glass. Using your instructions I have a flawless bubble free screen protector.

I cracked my screen on my Google phone the day before my Armorsuit came in. IT prevented the Crack from spreading. I LOVE IT

Great video. Great channel. Just bought this screen protector for my note 10 plus. I read the directions but i am a visual person and i am horrible at putting on screen protectors so I decided to look up a video. Your video was the first one. Glad I clicked on it. It looks like its a bit of work to install this screen protector. I hope its worth it!! Thank you. 👏👍

Thanks for the video, more helpful than the one by armorsuit. I've also been using the tempered glass for my S20 but could never get all sides to fully adhere and just noticed some dust under one corner. Just got a military shield and planning to apply it this weekend.

I just purchased the Case Friendly Armorsuit Screen Protector for my Samsung Galaxy A53 5G. I watched Armorsuit's RU-vid tutorial and just for the record, this video isn't doing all the steps and "might" be the reason for more random air bubbles. You are supposed to spray the front of the screen protector (film) before peeling it away from the plastic transparent sheet. Then you spray the back of the screen protector that will be the sticky film-side that goes on the phone. They say it will be wet enough to allow the sheet to slide around your screen so you can properly position. Then you spray the screen protector once you have applied it to your phone screen and proceed with squeegeeing. Wait 10-15 minutes BEFORE you use the microfiber cloth a final time to remove fingerprints. Armorsuit also recommends you remove the phone case and apply the screen protector at bedtime so that it can properly dry and not to put phone case back on for about 8 hours. They have several warnings on video and package inserts that you don't want to spray the installation solution on the device but on the screen protector. And it's normal to have minimal air bubbles that should disappear within 12-24 hours as the film sets. I have applied my screen protector and am going to let it sit for about 12-15 hours before I put the phone case back on. Best of luck to anyone who wants to try the Armorsuit Militaryshield! I did turn my phone back on to see if the touchscreen would work and I was still able to use it and the fingerprint sensor and the tiny bubbles in the corner don't even show up because of my wallpaper design. Now the waiting game to put the phone case back on!

These plastic screens seem better, than the glass ones that crack as you mentioned, and cut your fingers when you don't replace them immediately. These plastic ones are more durable.

Armorsuit makes the best screen protectors that are cost effective and tough as he'll the wet install works best I use a blow dryer after I squeeze it to bond it a Lil bit especially on the s22 ultra that has a curved screen I would buy this and recommend it to anyone plus a life time warranty.

Good video. My note 10 + came with a film screen protector already on it . Over the 2 years I've had it , I had a few scratches on it and even a tiny hole. I was certain the screen would be scratched some when I finally took it off but not a scratch on it. Needless to say I was impressed so I figured I'd look for a similar replacement to what it came with. Found Armorsuit in a quick amazon search then searched youtube for a review of it . This was the first video up and so glad I watched it. I've got a new screen protector on the way and you my man have a new sub. Thanx!

Super helpful!! I've always had really cheap phones (think under $50) so I've never done much with screen protectors. Then I went and bought the s20+ and I knew I needed something so I bought the one you demonstrated here. Opened it up and was like, "crap!" because it looked confusing and I thought I would botch the installation process. But I found your video and I think I'll manage to nor mess up the protector if I follow your guide. I also didn't realize I would have to wait for like a day for it to settle so I'll be doing it later this week. Wish me luck and thank you.

Hi Jeff! I'm just putting my 2 cents in ... I bought this screen protector recently for my Samsung S22 Ultra and couldn't get them to apply properly ... I tried both of them and finally gave up and threw them out! I followed their instructions to a tee and made 3 attempts with each one and the air bubbles were massive and couldn't get them out no matter what I did! Anyway ... I see most people who used them seemed to not have any problem at all, so I guess I'm stupid or something. I won't buy again!

Having installed countless screen protectors, the first thing to do is to clean your work surface, clean the phone, then wash your hands with dish soap and make sure to knock off any loose particles on you. Shirt, arms, etc... Then you go back to the work and wipe everything with a microfiber towel. Make sure there's no air blowing like ceiling fans, etc... Now you're ready to install a screen protector without getting so much as a speck of dust under it.

Just got a pack of these for my Galaxy s20 plus, I'm hoping the installation isn't too mind-boggling

These are my favorite!! I always trying to find hydrogel film screen protector, but I found this one for my iPad I hope it’s the same just a different name!

Great video. Very informative. I ordered this for my S22 Ultra.

I have gone through a few- good product but my problem is that no matter how much I clean I always end up with specs of dust that creates bubble pockets. Another thing-if you put your cell in your back pocket or anywhere without paying attention the actual film can come off. Once it peels off that's it. No good- you have to get a new one. It does protect the screen. I have dropped my cell several times but still intact with this protector.

Thanks for the how-to & review! Great upload

Since I got my watch I have used these screen protectors

Dude! I just saw this. Imma install it on my S20 Ultra and if it's convincing I'll buy it for my girl's Note 20 Ultra.

Whitestone Dome UV Glue & Glass is My 1st choice for a screen protector since they are the best brand name glass screen protector for curved screen phones. I rather have tempered glass that adds an extra level of drop protection and I still prefer the feel of glass more so than a rubberized plastic film. The Armorsuit screen protectors is a good 2nd choice, great for preventing scratches but not so much with drop protection but truthfully the only reason I bought those type of screen protectors from Armorsuit was because I couldn't find a good tempered glass screen that actually worked properly with curved screen phones. Until Whitestone and other similar companies starting coming out with the UV Glue & Glass Screen Protector consumer installation kits which solved that issue.

Great video Jeff. I just ordered one of those for my S21 Ultra.

Hey Jeff! I’ve had a couple of different glass screen protectors, but not a plastic one. The glass ones have a free replacement warranty, so I’ll just stick with them. I let a cracked glass protector live a lot longer than I should have because the crack in it wasn’t that noticeable. I would guess that a plastic one would probably get scratched easier than the glass would crack. Good review!

I just got it for my iphone 13 mini. I don't want protection from drops I just don't want it to scratch and its to pretty to put a case on it. I will use your video as guide. Thanks for making it.

I actually have the instructions in my hand right now and it says to use the blow dryer for a few seconds... Not a few minutes lol.

I bought one for my galaxy s9 and it was odd at first but I love it I've dropped my phone and no issues I also like the Gel feel on the screen...I used a different brand but looking for a new one for my new Galaxy s21 so im going to try this one

Thanks Jeff.

I order this screen protector and soon as I receive it I'm returning it back. I'm so glad I see this video, now I know this screen protector is a piece of garbage. There are others more simple to install and you get the same protection on your device.. Thank you for the video...

Thanks Jeff

I have to put my grandpas screen protector on so wish me luck

I only use armorsuit. My hubby’s has met with pocket knives n tools n it just self heals

I have read to use hair dryer on bevels

Lol I’m returning this 😅

These last forever and never get fingerprints. Just be careful not to deeply scuff it if you have to scrub off gunk. If you're really hard on the edges and they start to come up and get dusty, you can rinse it and just reapply. To prevent dust you can apply it next to a running hot shower. The humidity is ok with this type of protector because they don't use adhesive.

I drop my phone constantly over 2 years...till finally it cracked,with armour suit.

I've misplaced the spray that came with my screen protectors. What else can I use instead of the spray?

How do these work with the finger print scanner? I have a temper glass screen protector on my galaxy s 20 and it Barley picks up on my finger print.

Whitestone dome glass > any other protector!

Can i easily remove this just incase i want to change ?

how is it going for him? Samsung Galaxy Z Fold 3 5G with VRS Design Terra Guard cover Thanks

I just bought this for my note 20. Does the fingerprint sensor work still? Having a hard time finding a good product that still works!

I’ve used it it’s a pain to install

How was your sentivity with this screen protector?

I had someone from Best Buy's Geek Squad to put it on and he did with no issuses..After having it on for several days, screen still looks has a hazy kinda glittery. Exactly how it was after he put it on. Anyone else have that problem?

Does this turn yellow over time ?

How does it come off? Is it easy? Just curious.

Did this interfere with the fingerprint sensor?

Can you use your thumbprint with this screen protector?

Is this waterproof?

I just bought this and I am so scared to use it.

It sucks it peels off 😕

Is this screen protector stylus pen friendly?

These things are now made like junk! I used to use them and just ordered one again. They come in matte finish, you can't even see through it clearly!

This is by far one of the most frustrating things I've ever done. Appreciate the video but the screen protector is absolute trash. Pretty much just that cheap plastic that comes on your phone when you buy it.

N0

I hate the curved screen.

Horrible