Armstrong Vinyl Tile Installation and Maintenance Guidelines 

I so wish Armstrong would bring back real linoleum for residential customers. My aunt has some that was installed in 1959 that's still in almost perfect condition

THANK YOU!!!!!! I've lived in Disabled Housing for almosy a decade and even though i clean my floors, they became horribly stained & discolored over time. I've purchased steam mops, expensive scrubber mops, ALL kinds of cleaners, and nothing really helped. We were desperate enough that we're trying to save to hire a company to come out and professionally help. I couldn't find any DIY help online and so we had given up hope of making it work on our own, so thank you, THANK YOU! for sharing this with us! I'll be going to pick up some purple Zep degreaser today! 🥰🥰🥰🥰

Fabulous!! NOW THAT is the best description on how to lay and cut vinyl tiles.! THANK you..

When he was dry buffing with the red pad and the beat dropped I almost lost it!

Nice work . From the start to the finishing

That was tremendous! Thank you so much for sharing!!!

This video is pure skill. Also appreciated the floor maintenance section. Where do I get that mop bucket?

Excellent video I just love these floors

music is fire. install is fire.

Thank you so much for uploading!!

... and always don a bright orange road vest, lest ye be struck down by a lorry whilst installing your floor tile in the loo !

It looks 80s😅, but probably one of the best tutorials out there👍

Amazing soundtrack

Glad this video exist bc VCT isn't as a common for residential. Plus Good geometric principles.

Thanks so much for this video. The cut I need to practice is the Architrave 08:47.

I like how to cut around the pipe. Heated it to bend it. This ain’t his first rodeo!

With such precision

Hi, nice video, 👍👍.. a question Plzz.. If this vinyl floor gets damaged what to do. I have waterproof vinyl floor in our wet room. There is a cut around 6-7 inches long in the vinyl. Floor underneath feels very soft if stand on it. How to repair it? Or we need to install entire new floor? Thanks.

What are you do if you can’t find the right replacement tiles. Can you pull one out from like a closet?

BD muchas gracias excelente explicación

Great video!!!

Who has time for this? At my work I only have the weekends and the floor is always destroyed before it can set. As for floor finish; don't put it on in the winter because you need a good week for it to harden otherwise the salt will cause the finish to flake... In my years of experience, I found it best to go with ceramic at work because there is way to much maintenance for vinyl flooring. Also, be careful with coworkers and clients/customers, because even if you have a section blocked off there will always be someone who will move the barricade out of the way and walk on the floor when it is not ready. And lastly: if there is an office desk than use stainless steel tiles or something stronger than vinyl where the chair sits because if there is the smallest speck of dirt under the chair rollers than it is going to be smashed into the vinyl flooring; I have replaced countless tiles due to this for nobody removes their outdoor shoes. The only problem is that a vinyl tile costs about $2 each whereas stainless steel flooring is $20 each, but I promise you that there will be savings in the long run due to less maintenance and you only need this where the chair mostly rolls; approximately 4x4 feet...

To get to this level, I need to be O.C.D.

Do you have to seal the product and are the seams water tight?

Great explanation, thank you!

The music is awesome

Outstanding! Thanks

Just seen a huge ass church floor that was the straightest floor I've ever seen. No gaps anywhere. On MDF no less. The only issue I have with it is that maybe 1/12 of the tiles had cracked corners. Considering how straight it was, cracked corners seems acceptable. I wanna know what's up.

Hi, I'm installing this floor and I want to know what product is used to seal when the installation is finished, I appreciate if someone helps me

Excellent video.

What is the measurements for that arch marking tool? How far apart are they and especially where there are two holes.

that is ease in small rooms,but what when is big rooms like 40x40 ft,and when you square the area; wall is not square,or in that big area tile start to running for the miss leveling of the floor.

Good information also you can see How Mark And Cut VCT Around Drain

Does the color of the tile change after being sealed?

Nice video. I want to know where I can get that mop bucket.

Cool stuff! We recently uploaded a video of our VCT installation

Great info thanks

thanks nice work

Is this soundtrack available to purchase?

Was there any tiles left after all that maintenance? 😆

never had much luck with paper and vct glue

How did he not glue the template paper to the floor?

Can anyone tell exact name of the red and white tiles used in this video? Thanks.

We don't use the metric system in America.

Do you use glue for this product

Does any body knows why let the glue dry? And for how long?

VCT tiles has a dull side and a shiny side which side goes up and which side goes down and what is the reason?

how big did you cut the piece of sheet vinyl for angle back traceing

Always wear a red safety vest.

Any installers in Miami Florida

I have these armstrong vinyl tiles. Does anyone know if the overlapping vinyl template is 17 inches x 17 inches? I believe this is correct.

Ozbek tiliga tarjima qilish

obsess much!

"Equal overlap method" is a waste of time. Just place the tile over the partial tile position against the wall, then flip the tile over, flipping the tile toward the wall. Now mark your tile on both edges and then cut it. Done.

Slight math error there when they do the horizontal measurement. It should be 5 tiles, not 6. Great video though.

Le thuy

legweak