Array Based Families in Revit - What You NEED TO KNOW!

Подписаться 90 тыс.

Просмотров 35 тыс.

50% 1

This episode of BIM After Dark Live was inspired by a subscriber's email (Matt). Matt had a few questions about using an array based family in Revit to build families and some of the tips and tricks when doing so...
So, I thought it would be fun to build an array based family live! And walk through some of those little "need to know" tips and tricks along the way.
Topics We Will Cover:
- Creating a nested family and "carrying over" the parameters.
- Creating a line based family.
- Using and applying arrays
- Formulas to drive the array
- How to handle single objects and arrays in the same family
... and so much more...
Thanks for watching " Array Based Families in Revit - What You NEED TO KNOW!" !
Links Mentioned:
BIMBOX - Need a New Computer? Get the only one designed for Revit: bimbox.bimafterdark.com
Download the FREE Revit Family Cheat Sheet: free.bimafterdark.com
Join the "BAD" Community to Get the Sample Files from this Episode: community.bimafterdark.com
TimeStamps
0:00 - Intro
0:18 - BIM BOX
4:26 - Family Desktop Cheat Sheet
8:06 - Creating a Line Based Family
13:15 - Array Tool
16:25 - Object Spacing after creation of an Array
25:28 - Array Formula Example 1
26:47 - Aligning Major References to Reference Plane
31:26 - Array Formula Example 2
34:55 - Handling single objects and Arrays in the Same Family
36:56 - Input Parameter
38:31 - If Statement
42:55 - Visibility Point
47:50 - Assigning Parameters to Project
49:07 - Revision
52:23 - Outro
Here are some links to all of the hardware and software I use:
My Main Revit Computer (BIMBOX) - bimbox.bimafterdark.com/
How I Record My Tutorials (Camtasia Studio) - techsmith.z6rjha.net/zVvgW
My Microphone (Blue Yeti USB) - amzn.to/3992DYy
My Studio Headphones (Sennheiser HD 600) - amzn.to/2PxTFwj
My Camera for Videos and Images (Canon EOS 80D) - amzn.to/32zbpg5
The Lens I use for these videos (50mm) - amzn.to/3cvIE8D
My Webcam for Webinars (Logitech C922X) - amzn.to/2wP3AHf
My Favorite Sketchbook (“Blank” by 30x40) - amzn.to/32yAffZ
My Favorite Sketching Pens (Sharpie “Fine”) - amzn.to/3c8r8qO
Greatest Sketching Marker of All Time (Sign Pen) - amzn.to/3ceAukN
** Some of the above links are affiliate links, meaning you don’t pay anything more but I may get a small commission for a sale… Cheers! **
Music: Sexy from Bensound.com
Music: Badass from Bensound.com
Music: Happy Rock from Bensound.com

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@BingleDOop 3 года назад

Finally, a Revit video with decent sound quality!

@AlbrechtJ 3 года назад

Thanks Jeff, for a good lecture. This help me a lot on my works.

@leben1841 3 года назад

Very good. Aligning to the centre is definitely a great tip. The stair stuff almost killed me a million times. Thanks a lot Jeff.

@TheRevitKid 3 года назад

Those freaking "Stair" arrays! Brutal!

@MLangjahr13 2 года назад

This was an awesome lesson!! I used it to make some rods for the hanging of a track lighting. So the longer the track the more rods for it to hang

@TheRevitKid 2 года назад

Cheers man! Yes, tis would be GREAT for tracks and rods...

@arc_fab Год назад

Thanks for the information

@realblackmonday3563 2 года назад

Great Lesson. 14 years experience and learning still everyday. Thanks

@TheRevitKid 2 года назад

Cheers! So glad you enjoyed ! We can always learn something new! Myself included!

@mahinabil3406 Год назад

That was a great lesson thanks for the information and for being cool .... you make it fun to learn .....🤩

@TheRevitKid Год назад

Cheers! Thanks for tuning in!

@kkdad25 3 года назад

Dale from Albuquerque. Awesome site for learning REVIT. Shared with all ny coworkers

@mrfullcrcl 10 месяцев назад

This is going to be great for switchboards and MCCs. Yes some sections realistically are different sizes but that only matters for LOD 400

@AdamBouzaneOfficial 2 года назад

AMAZING TUTORIAL!

@TheRevitKid 2 года назад

Cheers! Thanks for tuning in!!

@Zokaoolmolk 4 месяца назад

wooow.Perfect!

@JFASACM 3 года назад

This really helped me! Thank you, sir!

@petarppenchev 3 месяца назад

Update with Revit 2025 34:58 - now you CAN have an array of 0 or 1 = ) P.S. Thank you for the grat content!

@TheRevitKid 3 месяца назад

Haha yes!!! You can!!!

@arthuur111 Год назад

ty ty ty ty

@saravanakumarmondaymohanra9464 9 месяцев назад

Excellent Excellent

@TheRevitKid 9 месяцев назад

Cheers! Thanks for tuning in!

@youssefibrahim6782 Год назад

Amazing... thank you

@TheRevitKid Год назад

Cheers! Thanks for watching!

@youssefibrahim6782 Год назад

@@TheRevitKid i have been trying to create a family with varying voids using an array when I loaded the family to another family or project and changed dimensions Revit says "A group member's sketch or family is constrained to an element that is not a member of the group. These constraints have been removed." my approach is Sometimes when making an array of some kind of specifically constrained geometry it is easier to make the arrayed element a nested family. That way the family itself can control the geometry and the constraint condition of the array is easier to manage as it is now only constraining position However, I use an array of void elements which can not be loaded as a nested family.) What is the best approach for this?

@TheRevitKid Год назад

The first question I have is why are you arraying a void? can it be done with a solid or different approach?

@prestonbaird6503 2 года назад

I feel like I am trying to do something similar to this. I am trying to make a trench drain with a set width of bar and set distance between the bars, and an adjustable overall length of the drain so it can be long or short depending on the distance of the opening in the floor. I want to keep the spacing between the bars the same and keep the bar size the same regardless of the total length of the drain, and if I were to stretch the drain length to be longer, have it create more equally spaced bars, and if stretched shorter, to reduce the number of evenly spaced bars to remain within the space created by the length of the line. Is there a way to do this by telling it to array into infinity but be defined by the length of the drain so that it only creates more bars within the defined length? Great video and I feel like some of the methods in it could be used in the issue I am trying to solve, just not sure how. Thanks!!

@athulsvi8778 2 года назад

Great presentation. Wt if there is a fractional number in case of no: of boxes? Or is there any way to get the boxes get trimmed at the ends, (for use in railing) ?

@TheRevitKid 2 года назад

I wouldn't suggest using this for railings as their are other methods to do so... As far as fractional number of boxes, no. You can't have 1 1/2 boxes. You would have to have some visibility paramters built in that show the last box as a half or something interesting like that!

@sallyvandal8453 3 года назад

Hi there. Great video. I wish to use an instance parameter for a specifically sized locker. I can't seem to get the array to be associated with the length of the line. I'm guessing there's a formula I need to put in, but I'm not sure what that should be.

@TheRevitKid 3 года назад

Depends on what you are trying to do... if the width of the lockers is determined buy the number of lockers then it is a formula along the lines of (Width = Length/Number) if its the other way around then its (Number = Length/Width)... If that makes sense...

@mahinabil3406 Год назад

hello i have a problem finishing a family (movable wall) very detailed and i was hoping if you have a video that explains such a family ???

@TheRevitKid Год назад

You'd need to be more specific than that...?

@markgerritsen3171 3 года назад

I'm trying to make a parametric Air Handling Unit, which consists of several sections. I'm looking into the possibility to use an array for this, because the number of sections varies from one Air Handling Unit to another. This video seems like a really good start. I figure I can use a nested Family Type Selector in the array to be able to select different types of sections (filters, fans, heating coils, etc). The problem I foresee is that the different section types will have different lengths. This would result in gaps or overlaps between the sections. I'm guessing I can use an 'offset' parameter to move the section back and forth from it's 'array center point'. To be able to calculate this offset I'd need to know the sum of the length of the previous sections in the array... can this be done?

@TheRevitKid 3 года назад

Mark, yes... It sounds like you will need to build this in and have the offset adjust based on the length of the types... It's challenging but should be do-able... good luck!

@AirV5 3 года назад

Is it possible to use this theory for window & door mullions as a type parameter? With the only controls being the size of the window/door, the size of the mullion, and the # of mullions(equally spaced) And if so, could you make a video? I'm struggling to make it work. (I know this works in a curtainwall system, but would like to use in a window/door family were I only create 1 family and have many types with different parameter settings)

@TheRevitKid 3 года назад

100%, yes it is possible! But depending on your situation it may be a curtain wall system that makes the most sense...

@GarthEdmunds Год назад

Good day Jeff, is there such a thing as a partial array? So on your blocks that are arrayed and the gap between them is zero. When you draw out the line for the boxes at the end of the line would be a partial box as the line wasn’t long enough to complete a full box.

@TheRevitKid Год назад

That's a bit more challenging but it can be done. You'd most likely need that box to be its OWN element (not part of the array) and use a ton of formulas to work out the rest...

@hamidmohsenzadeh2354 9 месяцев назад

I have a problem about void array. i am trying to model C-channel ( support underneath duct work ) i made body of C-channel using Sweep ( load profile family into main family and using sweep ) i made void family in generic model ( face base ) family template and used CUT command to subtract void part from face . I n second pace, load into main family.. problem is that when i use array command about void part, revit shome me an error . who can help me about solving this problem ( loading void family into another family and using array for void )

@malasuerte6714 11 месяцев назад

plz make a tutorial for making partition wall family which may contain 3 layers like wooden frame in middle and MDF sheet on both sides. for BIM, if you edit the type of wall by just layering that simply you dont get the perfect BOQs, like surface area, no. of sheets and other stuff.

@TheRevitKid 11 месяцев назад

Do some research on Parts for Revit. You'll get the best of BOTH worlds.

@AhmadChesti Год назад

Great video. Very helpful. Could you please show if we can make a parametric array in which the last element is a part of the first element. For example, I need to fill a room with tiles of fixed dimensions and I need 5.3 tiles on one side. Is it possible? if not how can i do this parametrically?

@TheRevitKid Год назад

I am not sure what you mean?

@AhmadChesti Год назад

@@TheRevitKid For example I have a room 5.3 meter wide. My floor tiles are 1 meter wide. I need 5 tiles and 0.3 m tile. How can we do this parametrically?

@TheRevitKid Год назад

@@AhmadChesti You'd have to build it so it creates 5 and then the visibility of the last one turns it on and sets it to the width you want... the last one would not be part of the array.

@AhmadChesti Год назад

@@TheRevitKid Thanks so much for the reply. As you know the new element appears when the length increases by 50% of the element length. Like when length is 5.4, there are 5 tiles, when it reaches 5.5 it add 1 tile. Can we change it so that it appears, say, when length is 70% of element length? for example only 5 tiles of 1m in length of 5.6m but 6 tiles in length of 5.7m.

@TheRevitKid Год назад

Yes, it can all be done but with lots of formulas!

@ravikiranchannna5625 2 года назад

Can you make a video how to make bricks in array line base family

@valeriepierre7297 11 месяцев назад

it's the same process just use the size of the brick for the box width

@vinayck855 Год назад

If we giving formula to that number of boxes ex(length/spacing) means. How to control array less than 2 ..is this possible ?

@TheRevitKid Год назад

You have to use visibility parameters and have a single box tube on whole the two boxes turn off!!

@vinayck855 Год назад

@@TheRevitKid I didn't get u ..pls give a short vedio of that possible ?... Number of array = ( length/spacing) and if condition for less than 2 as u shown in vedio

@TheRevitKid Год назад

@@vinayck855 I literally talk about it in this video haha >> 34:55 - Handling single objects and Arrays in the Same Family

@facelessone86 3 года назад

Is there a way to get the length parameter to not be greyed out? It makes editing some things difficult if you have to rely on only the grips.

@TheRevitKid 3 года назад

When the object is line based the length parameter is driven by the line (grips). Not sure what you are trying to make but it may be better for you to start with a generic template (not line based) and add a length parameter that is an instance...

@facelessone86 3 года назад

@@TheRevitKid I was able to make another length parameter and set the built-in to be equal to that parameter. I still get the grips but then can also enter in a length.

@TheRevitKid 3 года назад

@@facelessone86 Yup, that is an option, too! Glad you figured it out!

@facelessone86 2 года назад

@@TheRevitKid If I draw the element 12 feet long and then set the length parameter I've made to 10 it works well, but if I move the element it will remember the 12 feet and change the length back to that. Not sure exactly what is going on with it.

@iftekharkhan8879 3 года назад

What about nested array...in a line based family

@TheRevitKid 3 года назад

Same general process, for sure.

@EliasDaoud-ty8pf Год назад

I am suffering from scalable or parametric shape of an element of an array in a family. First it work, then adding or solving another issue, it stopped working. Let's talk about your example (mine is sound attenuator), if you want to let your shapes or rectangular ones, to be scalable, such a parametric length (with a formula) how todo that? Revit replied to me (in my family) that he cannot because the parameter has a formula, (where before he accepted). I hate Revit detailed families LOOL

@forename_surname Год назад

Do I need to watch this twenty times before understanding why the box centerline to box centerline measurement is called "Box Width" even when the space between boxes is more than zero, and the distance is clearly NOT in reference to the box width... learning hurts sometimes.

@TheRevitKid Год назад

So.... you GOT it?? :)

@Moosepindwalakafan 2 месяца назад

Appropriate from India

@michaelszirmay7689 2 года назад

THANK YOU BUT THIS VIDEO COULD HAVE BEEN 5 MIN

@TheRevitKid 2 года назад

I am glad you enjoyed the tutorial... I am sorry you felt it was too long. This was part of a 1 hour livestream with live Q&A. I look forward to seeing your 5 minute version on your channel 😉

@michaelszirmay7689 2 года назад

@@TheRevitKid i really didint mean it in a bad way (even iff caps was on). If i finish my project on time you bet i'll do it!