No video :(

Arrma 6s Diff Pinion Shimming

Подписаться 2,7 тыс.

Просмотров 25 тыс.

50% 1

Diff Pinion Shims 13mmx 19mm 0.2mm thick
www.ebay.co.uk...
For more Diff shimming video see below
Internal Diff Shimming
• ARRMA KRATON 6S V4 DIF...
Diff into housing Shimming
• ARRMA KRATON 6S DIFF F...
Merchandise Store
teespring.com/...
Banggood cars i run and recommend
Crawler
RGT EX86010 CJ 1/10
uk.banggood.co...
1/8 scale truck
Eachine EAT02 1/8 4WD
uk.banggood.co...
1/16 small ideal first RC car for child
Brushed
uk.banggood.co...
Brushless (faster)
uk.banggood.co...
LIPO Batteries i use
Zop Power Lipo 6s Battery 75C
www.banggood.c...
Zop Power Lipo 3s Battery 75C
www.banggood.c...
Zop Power Lipo 4s Battery 65C
uk.banggood.co...
Zop Power Lipo 3S Battery 60C
uk.banggood.co...
Chargers I use
Cheap but works well
uk.banggood.co...
Brilliant chargers well worth the extra money
HOTA D6+ AC 300W DC 2X325W 2X15A
uk.banggood.co...
HOTA D6 Pro AC 200W DC 650W 15A
uk.banggood.co...
Other Electrics
Dumbo RC controller with gyro
www.banggood.c...
FlySky GT3C Controller (rechargeable)
uk.banggood.co...
Brilliant 25 KG Servo I use in all my rigs
uk.banggood.co...
Buy in bulk 4 at a time
uk.banggood.co...
Music: www.bensound.com

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@Custnam 3 года назад

Have a Kraton EXB on the way and have been researching diff shimming. Never thought of putting a shim/ washer behind the bearing. Usually just shim the outer bearing. Great info and thanks.

@bournemouthrc4371 3 года назад

Yea it helps massively, probably better than shims behind the bearing

@NepDouble07 3 года назад

This is the last thing I need to do for my diffs, that and get some TRUE 2.25mm diff pins. The pins that come stock are definitely not 2.25mm, there's so much play on them. So hopefully after shimming up the pinion gear, I won't have any issues with the ring gear, and hopefully, after getting the thicker pins I won't have any broken sun gears anymore.

@HardcoreRC 4 года назад

Very helpful as i keep blowing out the crown and pinion on my Kraton, even after shimming the side - will give this a try

@bournemouthrc4371 4 года назад

Yea this is good little trick, to get a better mesh and stronger gears

@stuart3712 4 года назад

Noob here but sounds like your input gear and the input shaft cup was not set right or came loose overtime and gave it to much slop causing the input gear to eat the crown gear. prob one of the things people should check before or after each run to see if the input shaft cup slid from its spot. I'm sure shimming it would be a backup to prevent it from sliding? No idea, just tossing out my thoughts.

@bournemouthrc4371 4 года назад

@@stuart3712 Hi Joe the issue isn't slop there isn't any slop on the drive cup.it is to get the pinion to stick slightly further out to mesh better with the crown wheel gear

@HardcoreRC 4 года назад

Bournemouth RC yep, my rear was so bad that only 2/3rds of the pinion was running on the crown

@fabb60 Год назад

Great info I put the shim directly behind the pinion I will try shimming the bearing now

@MikeStrongArrma Год назад

Man went through 3 gears thanks so much

@gfrallye 3 года назад

Thank you man!! I made what you saying in this video & the mesh its excellent!! 2 channels i realy love... your & kevin talbot!!

@bournemouthrc4371 3 года назад

Cheers man, I'm glad it helped. Thank you I'm know Kevin Talbot but do enjoy doing these videos 😁😁👍👍

@BIGALSCRAWLERS 3 года назад

Once again buddy u r a legend, I also followed this tip of urs and just in time as my crown gear on my front diff has a chip in one tooth and pinion looking worn so again I thank u buddy knowledge is power and u r it 😉👍👌

@eriksthename 4 года назад

I really enjoy your videos. Keep it up!

@bournemouthrc4371 4 года назад

Cheers man 😁😁👍👍

@duuden23 4 года назад

Finally I catch what is going on about shimming! thanks! 👊👊

@bournemouthrc4371 4 года назад

Yea man, those little washers make a huge difference, I have 2 other diff shimming videos, li is in the description 😁😁👍👍

@duuden23 4 года назад

@@bournemouthrc4371 I will see them too! well shown and explained 👌

@refugiopina3402 3 года назад

Thank you!! Been looking for this video!! I blew out my diffirential doing some backflips. Definitely going to shim the input gear

@bournemouthrc4371 3 года назад

Yea that's easily done, hopefully this will sort it out for you. Mine are pretty tough now

@ChrisHirner 3 года назад

NIce! never thought to shim the pinion

@bournemouthrc4371 3 года назад

Cheers man, yea it makes big difference

@RCTurbo79 4 года назад

Good tip bro,but if you get good sealed bearings to replace the stock ones,this eliminates the play,also adding 2 shims on the drive side of the diff helps too! Every little helps! Peace bro...hope the Mojave build turns out good!

@bournemouthrc4371 4 года назад

Cheers man, I have a set of sealed bearings in my Krajave build and they needed the same. Yea I have also done that on the drive side, now I have done both they fit really snug. Hopefully will have the build finished in the next week or 2

@BusbyBiscuits 4 года назад

Guess I will also have to test this on my Kraton and buy even more shims then 😆 I did originally try a shim on the otherside of the bearing but it made it way too tight... Thanks for another great video mate.

@bournemouthrc4371 4 года назад

Cheers man, Yea there are a few shims needed on these rigs, once you have it set up they should be nice and strong

@Mr.Titanium1911 4 года назад

Nicely done brother👌🏻

@bournemouthrc4371 4 года назад

Cheers man

@billyhighfill 2 года назад

Thank you

@paulrakis 2 года назад

Great video on that that's were I'm having issues too. Can you just shim the back of the input gear ? Will that work the same way as shimming the ball bearing? Can you leave a link down below of what kind of shims those are I didn't see it in description thank you you're the man

@907arcticrc6 4 года назад

Awesome video bro . Stay safe.

@bournemouthrc4371 4 года назад

Cheers man, you too

@martyncrease8289 4 года назад

Wicked video mate perfectly dun 👍

@bournemouthrc4371 4 года назад

Cheers man, you tips are amazing. Need more to make the perfect arrma 😂😂😂

@martyncrease8289 4 года назад

Bournemouth RC I give up sharing tips on Facebook site it just used to piss me off when someone would try to find a fault in what you was doing Or people would say they don’t need shimming they have never broken a diff 😂

@bournemouthrc4371 4 года назад

@@martyncrease8289 yea man, I know what you mean, they will learn when they get through more expensive parts rather that some 10p shims to stop it happening in the first place. Keep them coming though man you have a load of knowledge on these things 👍👍😁😁

@dwest713 3 года назад

Just make sure not to install the diff backwards ;) @4:25

@TrashCanNinja87 4 года назад

posting links where to find these shims or a list of brands/ shims you use in general would help a lot of people trying to find these.

@bournemouthrc4371 4 года назад

Sorry I thought I had added it in the description, I have now added it👍👍😁😁

@syoung6126 3 года назад

Thanks so much for sharing your secrets. I’m in the US. Where did you buy your 13x19x.2 mm Kraton 5S pinion schism. Thanks

@TheHarlemShow01 2 года назад

Hi love the helpful content just wondering if this would be similar on arrma kraton 4s thanks am trying to learn

@pantygnome 3 года назад

Question - I thought we are also supposed to shim between the diff output bearing and the outer case. Wont that shim effect how much shimming is necessary for the pinion gear? Since it would move the ring gear closer in. Is it a give and take between the two? Thanks!

@bournemouthrc4371 3 года назад

Yes I do both I do the pinion first then take up any space with the ones between the bearing and the case

@jordon7227 3 года назад

Much appreciated! Are you still using arrma ring and pinions or have you gone aftermarket? I just stripped my 3rd ring and pinion on my v4 notorious (front diff) I will be following your advice, definitely getting a feeler guage to determine shim sizes

@bournemouthrc4371 3 года назад

Cheers man, Yea I still use arrma ones, but I believe the new v5 ones are hardened so they might help

@blackriderph4340 2 года назад

@@bournemouthrc4371 v5 diffs still needs shimming?

@blackriderph4340 2 года назад

Watched this vid when v5 is the latest model. Is this the same case as for the v5? Diff issue still? New sub💯

@brianworster4279 3 года назад

Has anyone found the needed 19mm OD shim from a US supplier? $32 shipping from the UK for a few dollars worth of shims makes them very non affordable.

@stuart3712 4 года назад

Cant you just pin the input shaft cup tighter to stop the slop? Im a noob but it seems to do the job as long as the set screw does its job. Mine has 0 slop but as i said, i'm a noob so maybe doing it that way causes issues? Also to note i have the HR diff bulkheads/case.

@bournemouthrc4371 4 года назад

No the issue isn't slop it's getting the pinion to stick slightly further out to mesh better with the crown wheel

@3SonsRC 4 года назад

This was super helpful!! Does .2 mill account for heat expansion??

@bournemouthrc4371 4 года назад

Yes I would never leave it to tight, you always want a little bit of play and clearance for when everything expands. It would either rub on the cup or snap a tooth on the gear if it expanded too much

@yourmama2299 2 года назад

So you are ideally looking for .2mm correct? What number is that on the feeler gauge? .007 or .008? Or am I totally wrong. Thanks!

@Joe-no5dj 4 года назад

How necessary is this because I was considering getting a kraton but this makes me have second thoughts

@bournemouthrc4371 4 года назад

It all depends on how hard you want to drive it, but in all honesty yes it's pretty important

@subietech2019 3 года назад

I had my Kraton stock for many months before doing this. It did however come with low diff fluids. That would be the best time to check

@NeighberhoodRC 5 месяцев назад

Can you use the shim that come with the truck behind the ring bearing of the pinion gear ⚙️ ?

@Rawana_Adventures 2 года назад

Can I use 13x160.2 instead 13x19 as it is very hard find In Australia

@subietech2019 3 года назад

I shimmed my front diff as well with 60k but I can't turn the outdrives by hand. Did I shim them too much?

@bournemouthrc4371 3 года назад

Yes if you can't spin them by hand its to tight

@sasalito 3 года назад

Why don't you have the washer AR709042 is it missing there?

@ZeuZLoD Год назад

I'm having a hard time trying to find the size "13mm 19mm 0.2mm" shims. Anyone in the U.S find a seller? The closest thing I can find is from Arrma themselves with "Washer, 13x16x0.2mm (4)" , and the exact part is ARRMA #ARA709031 . Will this one work?