Arrma Big Rock v3 BLX 4x4- Proline Badlands Upgrade- Hot Racing Upgrade- Step By Step 

mark maclean 👊🏽👊🏽👊🏽👊🏽👊🏽👊🏽👊🏽👊🏽🤙🏼

Congrats! You will love it! Thanks for the kind words! 💪💪💪🤝🤝🤝👍👍👍💪☝️

wescat2 appreciate the feedback so much! Also, thanks for the view! 👊🏽👊🏽👊🏽👊🏽🏎🏎🏎🏎

@@moerc Did you use the hex adapters that came with the Proline kit? I see it's a narrow and wide (2 each).

wescat2 yes sir, i did- sorry if that was not clear in the video-

@@moerc I saw the link to the set from Amazon the only reason I asked. Since I'm not aware why is there a narrow and wide. Which goes where? Thanks again

wescat2 use the narrow, the wide is only if your running TRAXXAS stampede 2WD, which has a stock offset with the rear tires being wider stance than the fronts.

Sam, you and I are on the same wave length, I am test running the big rock right now with the hot racing 17mm hub adapter with 10mm offset with the dboot Katar tires that come on the Arrma talion. 18t pinion, 13t pinion and 15t. Running 4s. Will post a vid once I get the performing how we need it too!

@@moerc were the offset hubs worth it? thanks Moe!

@@TheReman5000 to me? Yes! But you can also just put 12mm hex adapters on so you can run other tire configs. I am not very keen on the stock tires.

Scott McLinden appreciate the sub and views!!! lol, glad you went back and watched!!! 👊🏽👊🏽👊🏽🏎🏎🏎🤙🏽🤙🏽

Oh snap, well he must have bought the proline badlands with unremovable hexes? You should be able to unscrew the hex inserts on the wheels. The links in the description should lead to the correct parts I used.

TBH i cannot remember the offset. I have the packaging in my parts bin. Sorry man! I love the duratrax! they do look very nice for sure! Price is killer, you cant go wrong! Appreciate you being here!

Chad Damron much more stable with the badlands vs stock tires. The proline badlands, make a big difference with getting to top speed easier and under control. Especially, when going up to the 20t pinion. There is some ballooning with the badlands, but no where near the “knife edge” the stock tires ballon up too.

ilovejesus973 you are welcome!

Yah buddy!! What up!!

Sup man! I have not had any temp issues with the motor after running these tires. Appreciate you cruising by! 🤝💪🏎💪💪🤝

@@moerc yeah kinda just researching tires. I love the Big Rock but on the pavement it’s kinda all over the place at high speeds. Looking for just a little more stability.

For the slash, those may be short course tires.

Turn your punch settings up on the esc.

Thanks mo I’ll try it on the next run I’ll be putting up the video tomorrow or Monday and you will see as it hangs mid air and lands on its roof thanks again 🙏👍

Esc

Mine ran kind of hot, but the esc never cut off. What gearing and what type of terrain were you running in?

@@moerc stock big rock gearing. In cut grass.

BuildingByFaith just my opinion, I would not put 3.8s on this rig just for clearance. Also, please note how wide they would be as well, this will reduce the ability to turn as the tires may be too wide. If you end up putting 3.8s on let me know how it goes! I have the 3.8 proline trenchers on the Arrma Notorious in other videos on my channel.

@@moerc 3.8's are big. I'm also finding it difficult to find them. I would also need to buy Proline's $47 17mm to 8x32 zero offset adapters, ouch, so I decided to put Traxxas Maxx wheels and tires on it. I'll let you know how it turns out. Can I send you pics?

Pro-line Racing 6x30 to 17mm Hex... www.amazon.com/dp/B07MXRXQ79?ref=ppx_pop_mob_ap_share Cant u do a 6x32 17mm hex? See these-

BuildingByFaith post the pics to your channel. That way we all can see it!

@Moe RC good thought, but, according to Proline's website, the 3.8s need an 8x32 adapter and since I'm using a 17mm with a 10mm offset, I don't want to use an adapter with more offset.

What brand battery and specs??? 6th battery and done? Wow. Very good to know and thanks so much for the heads up! Did u adjust anything or just stock?

@@moerc I was running zeee 5200mah 3s. Truck was bone stock (new like yours) and it was my 3rd time going out and playing in the dirt. Normally I'd run just two batteries for a session. It was great then it made some squealing and bam! Locked up. I posted in two fb groups and some ppl said its the bearings failing... im going to try and get a replacement motor from horizon.

Benjamin Shepard should be covered under warranty. Man, so sorry man and thanks for sharing this!!! Did you check the heat on the engine between batttery swaps?

@@moerc thanks, I didn't check Temps but I was just playing in loose dirt. It shouldn't have had heating issues.

Benjamin Shepard Running stock tires? Your right, heat sink and fan as well on motor, stock. Should be good, but you never know. running in dirt is tricky as hell sometimes because the throttle stays semi heavy for longer periods. Hope it all works out!! 👊🏽👊🏽👊🏽👊🏽

Thanks for sharing! 🤝🏎🤝🤝🤝

Stock tires are not very good for loose dirt! No traction whatsoever. I ended up going with some Duratrax STAKKERS and It was night and day difference and they look sweet!