Arrma Kraton 4s v2.5 ESC Problems ? Easy Fix !

Подписаться 2,6 тыс.

Просмотров 3,6 тыс.

50% 1

Welcome back to ChriswithaC RC, folks! Today, I'm thrilled to share my experience with the Arrma Kraton 4s v2.5 and how I addressed an issue with its Low Voltage Cut Off (LVC) by utilizing the Spektrum Program Card for enhanced performance. Let's dive into the details!
I've been over the moon with my Kraton, but recently, I encountered some hiccups with it triggering the Low Voltage Cut Off. After reaching out to the helpful team at Modelsport in the UK, they suggested a warranty return following their testing. However, determined to get to the root of the problem, I opted for an alternative route and invested in the Spektrum Program Card.
In this video, I'll guide you step by step on how to use the Spektrum Program Card to fix the ESC issues, specifically related to Low Voltage Cut Off. It's important to note that this method is applicable not only to the Kraton 4s v2.5 but also to other models in the new 4s range from Arrma, such as the Mojave and Outcast 4s.
A massive shoutout to Shaun at Modelsport for his invaluable assistance over the phone. They not only guided me through the potential warranty return process but also showcased exceptional sales service. I must commend them for their prompt service - I purchased the program card from them, and within 24 hours, I was already updated to the latest firmware.
For those of you facing similar issues or looking to enhance your Arrma 4s experience, I've included links below to the Spektrum Program Card and the necessary software. Feel free to check them out and join me on this journey to optimize our RC trucks!
[Spektrum Program Card Link] - www.modelsport.co.uk/product/...
[Software Link] - www.spektrumrc.com/on/demandw...
Thanks again to Modelsport and Shaun for their outstanding support, and let's get those Arrma trucks running smoothly!
Keep the comments coming, keep sharing the love, and let's keep the RC spirit alive!
Stay awesome guys !
ChriswithaC RC
#bashing #basher #basherschoice #rclife #rclifestyle #rcliveaction #rclove #arrma #arrmatough #arrmakraton #arrmakratonexb #hobby #hobbyist #hobbylobby #rccar #rccaroffroad #rccarbashing #review #reviews #offroad #offroadrc #offroadcars #rc #radiocontrolledcar #radiocontrolcars #radiocontrol #welsh #welshandproud #chriswithacrc #firstlook #rcupgrade #modelsport

Развлечения

Опубликовано:

6 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@JosephDomsher 7 дней назад

Just picked up this rig a week ago. Thought it was shutting down to soon. This video helps. Thanks for showing us this.

@ChriswithaCrc 7 дней назад

Glad I could help buddy , I mean why Arrma does this baffled me . Stay awesome Chris 🤙🤘🚀💪

@owenjuarez2743 2 месяца назад

Amazing video!!! My battery was dead after just 10 mins and it was really annoying. Then I came across this video and everything was solved immediately I couldn’t be any happier!! Thank you!!!

@ChriswithaCrc 2 месяца назад

Ah man this is awesome news , so glad you managed to sort it out . Yeah it’s seemed to work for many to be fair so that’s great . Thanks for watching , Stay awesome Chris 🤙🤘🚀

@anilkumarshivam5949 Месяц назад

My Outcast 4s is exactly doing the same thing. It’s just 10 days since I bought everything brand new and full battery lasts only 10-15 mins. Took it back to the store where I bought it and they said it’s normal and that’s how long a 4s battery lasts (50C 5000 MAH). They ran my car I. The parking and lawn, lasted for 8 mins and battery was down to 24% from 100%. My car needs a firmware update. Hope it resolves the issue.

@jammar6134 Месяц назад

@@anilkumarshivam5949same thing here. Got mine 2 weeks ago. Think i got to get the card for and Update.

@atbear 2 месяца назад

Thanks for the video. Haven't read all the comments, but I wanted to share some troubleshooting I just went through. I was able to download the SmartLink app and update the V2 programmer without any issues... however, the app would lock up as soon as I connected the programmer to the ESC and turned the car on. The problem turned out to be that the .zip file has to be extracted to the Desktop of your PC, and won't work if it's extracted anywhere else, like a specifically named folder or the Downloads folder, etc. So, if anybody has their SmartLink app locking up without any warning, try re-extracting the SmartLink app .zip file directly to the Desktop. Also, FYI, my Kraton V2.5 I just received was already on the latest firmware version of B5.12.

@ChriswithaCrc 2 месяца назад

Thanks for the TIPS ! for others buddy awesome , Really nice you took the time out to help . Thats awesome that your now on the laestest firmware out of the box . Seems like arrma have moved forward with the ESC . Stay awesome Chris :)

@chikenkill 2 месяца назад

Thank you so much man!!! I was going crazy for a moment and could not find the solution on the forums. This worked like a charm thank you dude🙏🙏

@ChriswithaCrc 2 месяца назад

@@chikenkill you most welcome buddy :) thanks so much for watching so glad it helped . Stay awesome Chris :)

@boxer951 Месяц назад

Thanks for the video. It is going to help me with my Arrma Vorteks Boost 4S upgraded using the outcast/kraton 4S esc and motor.

@ChriswithaCrc Месяц назад

Glad I could help buddy , Vortkes Boost 4s wow that sounds like a blast . Stay awesome Chris :)

@kastaways1259 4 месяца назад

Great video Chris . Looking forward to hearing the results of the ESC update . I personally haven't heard of any issues , yet . Thanks

@ChriswithaCrc 4 месяца назад

Hey there , thanks so much for the kind words , fingers crossed 🤞 I’ll be able to get out this weekend and test it out and report back to you guys with my findings . Thanks for watching Stay awesome Chris 🤙

@user-bz6rl5do5y 4 месяца назад

Nice 1 Chris you couldn't have explained it any more pal This will help so many people m8 ❤❤

@ChriswithaCrc 4 месяца назад

Hope so! fingers crossed people can take information from this . Stay awesome Chris :)

@PeteWylieRC 4 месяца назад

Hey Chris I hope that this does sort out the problem. I think that changing the LVC is probably the thing that will make the difference but the version update might do something too. I will get myself one of these because it will be helpful anyway. Thanks for the great demo 👍👍👍

@ChriswithaCrc 4 месяца назад

Hey Pete , Fingers crossed! 🤞 yeah I agree with you to be honest with you the LVC is set very high considering to be honest and this is triggering the esc to do what it’s doing . As you say it’s always a good idea to keep on top of firmware updates also it’s like phones and computers same scenario really improved performance is always welcome . 🙏 Thanks for the kind words and really hope this works out for you buddy Look after yourself Stay awesome Chris 🤙

@RCRoads 3 месяца назад

Thanks for sharing. I have the spectrum programmer and it works great. I haven't used it in over a year but it sure makes life easy. I should see if mine needs a upgrade. Awesome video my friend.

@ChriswithaCrc 3 месяца назад

Hey buddy , Yeah no worries at all im really glad that this has been of some use for others . As you say the program card is very handy to have to say the least . Stay awesome buddy Chris :)

@jamiewellman6986 3 месяца назад

How do you update the card mine want program the Arma Mojave 4s I just got..

@jamiewellman6986 3 месяца назад

Or do I have to have the V2 programming card,I bought mine a couple years ago,not sure if mines a V2 programmer

@RCRoads 2 месяца назад

I'm not sure if this helps but you probably do need the V2 card. To update your card you need to connect it to your computer and install the latest firmware. @@jamiewellman6986

@Jason_Voorhees. 2 месяца назад

Just got my kraton 4s V2.5 and out the box im getting insanely long run times. On a 3s 6000mah lipo i had a good 35 minutes on it also on a dual 2s 5000mah lipo setup i had very similar maybe 5 min less run times, very happy with this truck.

@ChriswithaCrc 2 месяца назад

Hey buddy , thank so much for watching , well that’s awesome news well maybe I’m thinking 🤔 they might have now updated the firmware on the esc that comes with the trucks , funny enough my new Kraton 6s came with the updated firmware, so I can only assume there doing it at factory level now . Awesome truck aren’t they , so much fun . 🤩 Stay awesome Chris 🤙🤘🚀

@RC4us 4 месяца назад

Great info I've gotta get into mine and check it out but the time I ran the outcast I've not seemed to have a issue

@ChriswithaCrc 4 месяца назад

Hey Mike , Yeah defo get it dont brother . Yeah seems strange that the outcast does not have any issues , but from what ive found out today its possible that the outcast came with a different firmware version . Stay awesome Chris :)

@RC4us 4 месяца назад

@@ChriswithaCrc well I will get it hooked up and see what firmware it has and if theirs a update for mine my 8s was fine and so is my 6s I have 1 of all the black series esc

@clairecooper3848 4 месяца назад

Great vid very well explained 👍👌👍

@ChriswithaCrc 4 месяца назад

Glad it helped thanks for the kind words , sure does mean a lot .

@MrtipRC 4 месяца назад

I'm running 6500 mah 120c 4s lipo and no issues , only thing I changed was the lvc to 3 , punch to 7 and brake at 75% using the Hobbywing program card .

@kastaways1259 4 месяца назад

I have the Hobbywing too , I guess the only thing you cannot do with it , is update the actual ESC ?

@ChriswithaCrc 4 месяца назад

Hey buddy , Yeah i think the LVC is set way to high on these trucks , I understand why Arrma has done this but many wont get that . As far as upgrading the firmware you can not do it with a hobbywing card . You'll be able to change the settings , but the improvements in firmware will be unavailable . Hope this makes sense . Stay awesome Chris :)

@Big_Gazzz-RC 4 месяца назад

The Bigrock 6s had a similar issue, I had to update the esc on that, updating my other 6s escs too

@ChriswithaCrc 4 месяца назад

Yes they did buddy , it’s a shame that they let them out of the factory in this condition that you have to find the issue and spend money on ways of upgrading the firmware . In this day and age surely Bluetooth app and over the air updates lien phones should be a thing . Quite honestly if Traxxas can do it why can’t arrma hey ? Stay awesome Chris 🤙🤛🤜👊🚀🛞🔥🔥🔥

@michaelsager3616 4 месяца назад

Hey Chris, have you run the car and seen a difference in the lipo cutoff that fixed the issue after updating?

@ChriswithaCrc 4 месяца назад

Hey there buddy , Not yet as its raining really bad here , Im hoping to get out this weekend . Fingers crossed the issue is solved then . Ill Report back as soon as i know . Stay awesome Chris :)

@MrKen-sj5qi 4 месяца назад

Rec'd my Spektrum V2 yesterday. Had to upgrade the firmware on the programmer. My computer skills are minimal, but I managed to fumble through it. Something about Zip files and extracting them??? BUT, I did not check the ESC for the latest firmware. Will attempt that later today.🤞

@ChriswithaCrc 4 месяца назад

Hey buddy , seems like this video dropped at the right time for you . Yes you ideally need to exact them to a folder and then run the exe file to open the software .

@MrKen-sj5qi 4 месяца назад

@@ChriswithaCrc Went back to the computer c/w the Spektrum V2 programmer (with the latest firmware PB-1.0.23 installed) and my Kraton 4s V2.5, followed your video tutorial to the letter, and was able to update the ESC as well with the latest firmware (B5.09). Thanks for the heads up, Chris. Keep up the good work...

@bigbristv 4 месяца назад

This was great info! Thanks. I hope this works with the non stealth 120a esc that came in the Mojave 4s. I received a warranty replacement and just ordered the program card in hopes I can adjust the LVC settings. Here's to hoping it works! 😉👍 Edit: if it's OK with you I'd like to share this video on arrma forum where this question has not really been answered.

@ChriswithaCrc 4 месяца назад

Hey buddy for sure you’re more than welcome to share this video , please do bud . As for it working I can confirm it’s made a massive difference, I recorded a video of it running today and it’s transformed it . So glad you enjoyed the video , Stay awesome 🤩 Chris 🤙🚀👊🛞🤩

@bigbristv 4 месяца назад

@@ChriswithaCrc just programmed all of my escs today and yup, it unlocked all kinds of stuff. I shot a long video but I'm just going to link yours now, you did a much better job! You got a sub from me mate! Thanks again!

@doityourselfrcdrew6807 3 месяца назад

You can change the LVC settings without the program box by using the set button on the ESC. It worked perfectly for me and installed of 10 minutes I got around 22 with my Gens Ace 5000mah 50c Lipo!

@ChriswithaCrc 3 месяца назад

Ah thats great news bud ! , Yeah you can manually set the LVC but it is nice to go through it with this program card and i always recommend keeping the firmware updated for sure , you would be surprised how much better they feel to drive after . Stay awesome Chris :)

@doityourselfrcdrew6807 3 месяца назад

@@ChriswithaCrc definitely a good idea to get one. I emailed Horizon and they claimed that the truck should only get 6-15 minutes of run time. That was before I changed it. Kind of disappointed they didn’t offer any additional help like recommending the program box or manual reset. Thanks again for the videos!

@ChriswithaCrc 3 месяца назад

Wow really thats all they said ? , Thats a shame they shunned you off like that ! . Yeah it would be nice if like Hobao they include a program card with the trucks . Your most welcome just really glad i can help others with the videos . Stay awesome Chris :)

@frederickgrassie3383 4 месяца назад

Chris, I updated my program box v2. But I did not keep it connected to the laptop, to the v2, and into the EDC. All my settings are now changeable, but did I do it wrong, by not keeping the computer connected to the v2 and ESC? Does keeping it all connected upgrade something different in the EDC? Confused😢

@Lee.gRC27 4 месяца назад

Keep it connected to the computer when updating the firmware,, any other time you can connect it directly to a powered esc,, it's just an option to upgrade and change the settings when the esc is out of the car and there's no battery connection

@frederickgrassie3383 4 месяца назад

@@Lee.gRC27 ok, thank you very much.

@ChriswithaCrc 4 месяца назад

Hey buddy As @Lee said you will need to keep it connected to change the settings and then click apply for the ESC to save them.

@jammar6134 Месяц назад

I got that issue with my outcast. And my lipos are hot like crazy after 10 to 15 minutes.

@ChriswithaCrc Месяц назад

Hmmmmmm what Lipos you using dont mind me asking buddy . Stay awesome Chris :)

@thepatternforms859 2 месяца назад

I have the version one orange and black esc should I still do these upgrades too?

@ChriswithaCrc 2 месяца назад

Hey buddy , it’s always worth checking for updates with your esc . Stay awesome Chris 🚀🤙🤘

@Boring_RC 4 месяца назад

Great video Chris! I’m having problems with my Kraton too and having recently just got an outcast I wonder how long it will be un till that starts to play up.? I think it’s a shame that people have to go through this hassle, if I was to return my esc under warranty will it only be a matter of time un till it needs updating again? I was considering a max 8 combo for them both, but by the time I’ve done that I should have just got 6s models. Very disappointing because I love both these trucks when there working properly.

@ChriswithaCrc 4 месяца назад

Hey buddy , firstly thanks so much for the kind words and comment , Sorry to hear that you’re having problems with your Kraton as well . As I said I would most definitely have a go and see if your truck needs an update and then lower your LVC as it does seem they have set it rather high out of the factory . I believe arrma rushed the programming of the escs this time around as you might have noticed even down to the Krayton they staggered the colour release here in the UK for example the red and black came out first then the green , then the outcast release was after so it’s quite possible that the outcast is running different firmware. The public that bought the truck and don’t like ourselves delve deeper in to tuning and just ran them will not know . As you say though if you fit a max 8 combo yes this pushes the trucks in to 6s price range ! Having said that there also with problems mind . Stay awesome Chris 🤙

@L2theWcarscoffeelife 4 месяца назад

Just a note I am still on Windows 10 and had a problem updating the programmer I did not have a rar file extractor I had to download a free program WinRar to open it so if anyone has a problem opening the software try that. Funny thing is the non stealth esc is exactly the same once you do this update that is what Horizon sent me when my button fell off anyone that has the orange and silver 120 amp its all the same and thats right from them so yeah once I updated all the new features were there. Like I said before the low voltage is set kind of high I think this will work for you now,

@ChriswithaCrc 4 месяца назад

Hey there buddy , Yes on windows 10 you will have to run WInrar to extract the file i believe its built in to windows 11 . Yes i agree 3.6v LVC is way to high it triggers the ESC when you still have plenty of run time in the batteries . Weird that they sent you the Older ESC on what truck did you have it dont mind me asking ? As the new Stealth ESC v2 only come on the kraton v2.5 , outcast v2.5 and Mojave 4s . Look forward to hearing from you Stay awesome Chris :)

@L2theWcarscoffeelife 4 месяца назад

@ChriswithaCrc its on the new v2.5 Kraton. I thought they sent the wrong one because it didn't have all the punch settings and other stuff. They said its the same esc just a different color and they were right I did the update and there was all the settings. Luckily I dont care about color and had the programmer. The 6s Big Rock and Kraton as well as the 8s have the newer versions of the esc as wellnof course they are larger lol. The Big Rock had the brake glitch issue I wonder if it was not across the board with these thats why there is an update. If you watch on the remote the power draw accelerating it dips down a good bit so thats why I think when the current would drop it would trigger the low voltage cut. It was definitely set to high on all of these I found out on my Big Rock it would just shut down still had 40 percent or more left.

@Rocman76 3 месяца назад

I'm having this issue, on 4 of my 5 runs, different battery packs, LVC even kicked in at about storage voltage twice. This must be a Filmware issue...level 4 is 3.5v but mine are cutting off at 3.8v

@ChriswithaCrc 3 месяца назад

Hey buddy , Yeah the firmware update sure has helped with mine , Once you have set your LVC are you saving it ? Look forward to hearing from you Stay awesome Chris :)

@Huntmx24 4 месяца назад

I just got me a kraton 4s v2.5 and noticed this on my first run. It went in to low voltage very fast. In the manual it shows you how to adjust these settings without the programmer device. You can just hit the set button on the esc to change it. I set mine from setting 4 down one notch to setting 3 so we will see if that helps. Thanks for the video!

@ChriswithaCrc 4 месяца назад

No worries buddy at all im pleased to say that it worked great ! , Here is the Video for you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Awq351qPnuM.html Stay awesome Chris :)

@Huntmx24 4 месяца назад

Awesome! Thanks so much brotha! @ChriswithaCrc

@dadcontent 2 месяца назад

Yeah i wanna change my low voltage cut off too, expensive for what it is could just get another pack

@ChriswithaCrc 2 месяца назад

Hey buddy , I feel it’s worth it in my opinion as all the Arrma trucks use Spektrum esc and are firmware upgradable . Plus can us as a battery checker when your out and about Chris 🤙🤘🚀👊🔥

@danielbaena3733 3 месяца назад

Hi Chris. Thanks for your video but I'm having problems when trying to update my mojave's esc. I followed all the steps. I was able to update my spektrum v2 card but when I try to do the same with the esc, the spektrum usb link page frozes. I make sure all cables are set up right and the ESC tab is selected on the S. USB link. The Connection Status with the ESC Speed Controler gets its green light but that's all I get. No option to get the firmware upgrade and all tabs on the screen get unresponsive. The programmer card works fine on the mojaves esc. I can change all parameters including the lvc. Any ideas why the program can't recognise my esc? Many thanks and congratulations for your channel!

@ChriswithaCrc 3 месяца назад

First thing daniel is do you have the latest software installed ? Second are you opening the software firstly , then the program card and them connecting to the esc and turning the esc on ? If all the above is done . maybe uninstall the software then retry ? what about the program card on its own ( NOT CONNECTED TO PC ) does it read the esc in stand alone mode ? Look forward to hearing from you ChriswithaC Ps thanks so much for the kind words buddy ;)

@danielbaena3733 3 месяца назад

Hi Chris. Thanks for your quick response. Yes, double checked everything. Lastest software version installed, program (deleted, install it again) and programmer card. Also followed the connection sequence and the card connects on its own to the Mojaves esc and operates correctly too. Very weird. Anyway thanks for your time again and have a nice weekend 👋

@danielbaena3733 3 месяца назад

Just realised that after trying to do the esc update and having the screen frozen as soon as I disconnect the v2 card from the computer then the firmware upgrade tab is available showing the old B5.07 and the new available version B5.09. But as soon as I connect it again it just disappears and goes back to the main screen. It's like the software recognised the esc old version but for whatever reason would not let me update it.

@ChriswithaCrc 3 месяца назад

Thats really strange indeed . Ill check it out to see if i can replicate it myself for you .

@samintrepid 4 месяца назад

I have the same problem with my Kraton 4s v2.5 the low cut off voltage always kick on after 5 min. I buy the digital card from hobbywing but I was not able to adjust the lvc. I was finally able to adjust the lvc with 10$ hobbywing card. Since that I never have problem.

@Huntmx24 4 месяца назад

What did you set the lvc to? It's setting 4 by default I believe

@ChriswithaCrc 4 месяца назад

Hey buddy great news , Here is my update video for you worked great ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Awq351qPnuM.html Stay awesome Chris :)

@ChriswithaCrc 4 месяца назад

Hey buddy drop the LVC down to 3.2 volts . Stay awesome Chris :)

@paultro8457 3 месяца назад

I bought a Vortek cheap with this issue. Very short run time no matter what battery I run.

@ChriswithaCrc 3 месяца назад

Hey buddy , have you tried to update the firmware on the Vorteks ESC and then lower the LVC ( Low Voltage Cutoff ) . This will help massively , Remember no lower than 3.2 volts should be more than enough , Arrma has a habit of setting the LVC really high . Hope this helps Stay awesome Chris :)

@LegendsPizzaCo 4 месяца назад

When I connect my device to my computer it only says "horizon v2 PB-1.0.10" and it doesn't move. If I click any button on the device it then changes to "connecting esc" it won't say connecting PC? Any idea what I'm doing wrong? Thank you

@LegendsPizzaCo 4 месяца назад

I tried a new USB cord and it did say connecting PC finally but the software wasn't recognizing it. Now when I try again with the good cable it's back to saying connecting esc. Idk what I'm doing wrong

@LegendsPizzaCo 4 месяца назад

I got it now but it's acting very odd. Sorry for all the questions lol

@ChriswithaCrc 4 месяца назад

Have you solved the issue now buddy ?

@chaoticadventure 6 дней назад

I just got a brand new Mojave with a black esc and i have updated my V2 programmer successfully and it still wont let me adjust any any parameters it just says please updte software still. Any ideas??

@ChriswithaCrc 4 дня назад

Hey buddy , Have you checked for a update on the ESC now ? Sounds like its needing a update also . Look forward to hearing from you Chris :)

@chaoticadventure 4 дня назад

@ChriswithaCrc thanks,I figured it out. Punch level 9 here we come!

@cue03 4 месяца назад

It appears the Mojave 4S has an upgrade to its firmware as well.

@ChriswithaCrc 4 месяца назад

Sure does buddy , have you done yours ? Always keep them up to date for sure 🤙 Thanks for watching Stay awesome

@cue03 4 месяца назад

@@ChriswithaCrc yeah I updated it yesterday after watching your video. It opened up more options that were not there before. One strange thing that I noticed was on the factory release it had BEC at 7.4 default and on this new firmware it has BEC as 6.0V default. Not sure the change but I switched it back to 7.4 and will hopefully get a run in today. Thanks for the videos man. Keep ‘em coming.

@snakes301271 4 месяца назад

so iv the kraton 2.5 arriving today, i take it there will be a programming card coming with it lol fs more money

@ChriswithaCrc 4 месяца назад

Ah nice man the K4 v2.5 at the moment is my favorite to drive awesome truck ! Yeah unfortunately the program card does not come with the truck its a separate purchase . Enjoy that truck buddy it's a corker ! Stay awesome Chris :)

@HNunyabusiness 2 месяца назад

Can this be used with a MacBook Pro?

@ChriswithaCrc 2 месяца назад

Sure can buddy i believe Chris :)

@theCHAD_official 4 месяца назад

Here for the comments. Hoping for an update confirming the ESC firmware update resolves this issue. I have noticed what I thought was LVC on a relatively fresh pack. Would be awesome if this update fixes it!

@ChriswithaCrc 4 месяца назад

I hope so too , I’ll let you guys know asap buddy Stay awesome Chris 🤙

@theCHAD_official 4 месяца назад

Thank you! Awesome content as always. Just hit LVC at 3.7v 4s battery so really hoping this firmware update and LVC change is the fix!

@spartancaptain5691 4 месяца назад

Mine will not work. It freezes the program when you turn the car on and won't connect to the esc.

@ChriswithaCrc 4 месяца назад

Hey buddy , have you updated the program card buddy ? Look forward to hearing from you , Stay awesome Chris :)

@RyJuPage 3 месяца назад

I actually had this exact same issue. I did update my box to the new firmware but it still will not load and just freezes the program just like you have said. I’m not sure what to do.

@2LocosRCing 4 месяца назад

I'm having the same problem with my 8s kraton v2

@ChriswithaCrc 4 месяца назад

There is definitely an update for it buddy . Also lower the LVC on the esc will help loads . Stay awesome Chris 🤙

@2LocosRCing 4 месяца назад

@@ChriswithaCrc thanks for the reply,I'm gonna get it updated.

@5PointSlow 2 месяца назад

It didn't help mine. When I tried to connect it to the esc the program just freezes up 😢 edit: after reading comments I see you have install to desktop which I did and did everything but still no luck the ESC still goes into low voltage. 😢😢😢😢😢 arrma is sending me a new esc when they come off of backorder 😢😢

@ChriswithaCrc 2 месяца назад

Sorry to hear that buddy , can I ask though did you change the low voltage cut off ? Chris

@5PointSlow 2 месяца назад

@@ChriswithaCrc yes I did all the same exact settings that you did.

@ChriswithaCrc 2 месяца назад

Ah ok and what about updating the esc ?

@mkedefrusciojr2740 4 месяца назад

When did you do this? Whenever I connect it to my ESC the program freezes and I can’t update the firmware.

@ChriswithaCrc 4 месяца назад

I updated the program box and the esc yesterday that’s when this video was recorded buddy . May I ask you have followed the steps I have ? It’s also worth reading through the PDF manual that comes with the program box . Look forward to hearing from you you Chris 🤙

@phillipwalsh2972 4 месяца назад

Any updates?

@ChriswithaCrc 4 месяца назад

Hoping to record a video tomorrow buddy depending on weather here . Stay awesome Chris 🤙

@iankibbler5616 4 месяца назад

The new 6s trucks had esc problems as well, I think arrma should pay for the esc cards

@ChriswithaCrc 4 месяца назад

Hey buddy , I got to be honest with you I totally agree it’s not fair that the end user ends up footing the bill or being without there esc whilst a warranty replacement is sorted . You can’t blame the model shops either on this .

@iankibbler5616 4 месяца назад

@ChriswithaCrc yea it's not the model shops fault it's arrma for not testing properly they make good rc's but should test better before releasing them

@rccarsandmusic2641 4 месяца назад

To bad the RTR 120A orange has no firmware upgrade. Only black and retail orange and Losi. Shame on Spektrum.

@ChriswithaCrc 4 месяца назад

Hey there buddy , Hmmm ive not had a chance to look at the 120 amp firma ( OG ) black and orange yet ill have to plug it in and check it out . Stay awesome Chris :)

@rccarsandmusic2641 4 месяца назад

@@ChriswithaCrc my 120a LVC is 3.5v I get 20min runtime

@snakes301271 4 месяца назад

no change from Horizon hobbies then. sell you a brand new car and expect you to spend another £30 on a program card. a card ill never use on any other model as who buys spektrum escs for there cars. what a joke

@ChriswithaCrc 4 месяца назад

Hey buddy , Thanks for watching , Yeah i agree in this day and age its a real shame that you can't just OTA update a ESC , I mean the technology is definitely there to be used for sure . Don't get me wrong its nice to have a program card now for my spektrum ESCs and ive done a few friends with theirs as well . Stay awesome Chris :)