Arrma Kraton 8S Worlds BEST RC Car? 1st look + TEST (It's MASSIVE!!!) 

Epicccccc

Kevin Talbot It's a lambokraton 👊🏻

Mindblowing

As usual from arma its a truggy not a proper monster truck but it should be fun. i would still prefer the xmaxx i think excpt if you were more into tracks and racing.

It's the best thing I've ever seen tbh

epic! thanks bro!

@@KevinTalbotTV As you're one of the ONLY honest people that do this...can you rate quality 1 2 3 of Traxxas,Arrma and Losi ?

Me too bro me too

Same I have a tracks rustler and I pulled it out of my basement charged it up and it was fun I put it on lipo and it does 40 I’m getting a brushless kit

I second this notion same here

It surprised me because it was hardly faster.

@@BenBlackEquinoxEngelhard made for torque not speed

Made for breaking lol and it’s so slow

I follow u on Instagram RC crew lol

@@BenBlackEquinoxEngelhard ....

Oh so that's what it is? I was wondering about that. Some more CYA stuff to confuse everybody. Good grief. You want to protect your kids keep them off that damned internet.

@@williamlee1429 Indeed, no one talks about how the biggest threat to child welfare is domestic abuse and family conflict. Get'em out of the house! Get'em bashing!

Actually saying that wont help. If the content "has potential to attract children" what you say at the beginning doesn't matter.

For coppa

Well said regards keeping yer kids off the internet. IT should be down to parents to supervise kids on the internet.

This man is correct

Plastic chassis better . Metal just accordion bends everything! Traxxas does it right things give properly before causing expensive repairs.

Basher.... however it still breaks but supercedes the other 1:5 scale trucks.

No Xamaxx killer... much slower and when you really bash it you'll see that you will add it to your non bash proof shelf. As it is the Xamxx stands alone as the reigning

Lol fa real I'm tryin to buy one but can't find it lol

@@joeexnicious9806 where you from mate ? I can search your countrys web. they are for sale in england everywhere online...

I'm America Goshen indiana

bc they prob did

@@joeexnicious9806 kmibj ?

Yup I saw that too I thought it was hooked in weird till I looked back at it, lol looks like the kraton took on old problems 😂

Was just about to comment on that...its for sure bent after his test...I wonder it the chassis is bent also

Same old problems with their other cars

I think it has bent, I checked back earlier in the video to check it wasn't like that before.

rear end got bent either chassis or the brace mount. arrma tough baby ;)

What category is it in?

reagan kyle that’s a very good idea my friend!

Matt Green looks bent.

It actually looks bent. The same old Kraton issue?

no straight :D not gonna survive real abuse

Yep... Compared to the first unboxing definately bent (unless he using a fish eye lense)

@@5punkybob no fisheye, the table is straight

haha thanks dude

Trailer Trash Racing nice to see you here buddy! And I agree!

Rc Unlimited what’s up buddy!!!! Come here often!?😂

Trailer Trash Racing often as possible haha! 😂🤘

Trailer Trash Racing he can afford it that’s why. He owns a Lamborghini bro. Hahaha.

seems this truck it’s not made for that kind of bashing

Looks bent to me!

looks like a banana to me lol

Time for M2C to make some parts i guess. What a failure to make it that weak when its so new and where the infraction, limitelss as well as Mojave has proven to be quite durable. I want to start an RC car company and create trucks that are at least as strong out of the box as you can make these cars with aftermarket parts.

Indeed, looks like it's bended 🙄

@@DJayFreeDoo I've got my mojhave and second day broke a lower front arm ( glued it back together with an aluminum bottom plate), rear body mount and front bumper mount is trashed, also tried to reprogram the esc and it locked up into program mode and had to sent it in to horizon. Not as tough as i was hoping, but amazing to drive with a full punch esc.

Kev should have at least 10million

Sem_._ 013 because RC cars are not that big.. car audio is, bigger and that’s just car audio

Pretty sure not many people wanna watch a man child play with toys you can't afford

It doesnt look like it will need any

Every part

@@brycecourtneymusic Explain the bent T2T brace then xD

i done the same and you're right!

Damn you are right it did bend, he didnt even send it yet, really arrma.

Man..... That sucks.... It's bent like a banana already...

@@jjjjrrr678 maybe his comparison to a banana was a sign - illuminati confirmed

That’s why sometimes plastic is better

haha

Did she though? 🤣🤣🤣

Lol that’s great 😂

Said no girl to you ever

They always say “Those who brag don’t sag” 😆🤣😂

The raminator 1/4 scale is way bigger 12" tall tires runs on gas weighs 80lbs

This is a high voltage system to much reistence and poor connection with adapters. The more solid the conmection the better delivery of solid safe power

@@RCKYOTA don't think it's high enough for that to matter so long as you got the right gage wire and decent enough connectors. I can't imagine it's an issue if you're using the right materials. Do it with much higher voltages than any RC battery can provide all the time and the connectors we use for our servers racks are copper, not even gold plated. We push 480 volts through the lowest voltage rack at ridiculous amperage so I don't believe it'd matter for an adapter that is less than a couple of inches long unless you got crappy wire or too small of a gage wire. The resistance would only be an issue if we were talking a wire made of a poor conductor and it is super long. The highest resistance will be in solder joints but if you can get bare wire in direct contact with the surface you want to solder, rather than using solder as your conductor, there shouldn't be any issues... Or you can cut her stuff up, your stuff after all, just trying to save that warranty as an adapter should not affect performance at all unless your cable is over 20 feet long and low grade or low gage....

It's all for the show, it basically translates to Kevin is in the house and this is my truck !!

Damn true, nice eye

mp5effect yup

Darn armma

Yep ARRMA tuff

It's already broke. The brace is already bent. Most likely something in the chassis also.

I broke my 3s typhons chassis in 5 minutes and a arms

Scaler04 which will be like 3 grand!

Scaler04 It will probably be an xmaxx with a diffrent body

Who needs that I'll keep my 1/8th scale e revo with 8s power

I waiting on a 8s outcast

An x-revo 👌

It Looks bend

You’re right, at minute 5:15 looks completely straight

Worthless Rc. Especially parts support. Now it's a hype,and next year you can't even get a screw for it.

Yeah your right good catch!

Not worth it doesn’t look like it’ll hold up

I agree

I... also agree

I also think I agree

The Xmaxx also only goes about 40. Both do 50+ with the speed gear, still 40 is plenty for a 1/5 scale specially if its for bashing

You’ve got to have a fairly large place to run if you’re going over 40mph, I’ve got a 2 acre field out back and I run out of room often!

aimen to that wth? I guess arrma shipped them all as demos and leaving us little peons zip lol

ThatsMyRc yea agreed. I think now that I see what the hype is all about I might think more about getting the Losi 5th scale I already have a 6s Kraton

Yeah you should write Arrma and say it hurt your feelings when they sent some youtubers products to review prior to the public sale. Also your fridge is running. So you better go catch it.

RC Ranch salad dressing, here is your IQ number for the day🖕

2 Shoes I posted that on Facebook and people didn’t get my point

Exactly this thing is weak compared to the xmaxx. Nothing can take a bashing like the xmaxx

Rc driver online having issues with the pillow ball setup.. ARRMA tuff

The exterior look simular, but its what underneath that counts. And that a big difference!

look at the brace at the beginning and end of the video, the answer looks like yes

Oof that brace is bent

Adam brocki instant turn off

About as fast as my xmaxx was stock.. Not so much now. Lol

I figured itd be faster than an xmaxx with that low and wide stance. Then i remembered all that metal weight slowinf it down

Yeah, seems underwhelming? I dunno I expected more.

Same here mate whilst watching the video I was looking at them on modelsport uk then after I seen it on the video I left the website after seeing the price

Honestly I think I like my xmaxx 8s more cause my gearing is for high torque and it still hits 50 miles easy...

Agreed. My 12 year old converted nitro savage to e savage lifts the wheels at any speed. Xmaxx has ny vote out of the two

haha yeh!

it's because kev's xmaxx is geared up

SuperMineMatteo or was he running 6s?

@@opairsoft8100 probably

My stock geared xmaxx is still pretty crazy tbh. Let’s hope he was just on 6s because the truck actually looks really nice.

👍🤣🤣 good call

So true, just another aluminum chassis truggy, nothing new, at 4mm that chassis is gonna bend under all that weight.

i take it you didn't subscribe then? lol

@@KevinTalbotTV You got it. I value my eardrums. and if you are going to put your self out there, you are going to get some criticism. Do with it what you will. Grow, learn or reject. What ever, that's up to you.