Arrma Kraton EXB upgrade from 6S to 8S monster power - best motor esc 

On my Kraton 1/8 scale exb, I run the Castle MMX8S ESC with either the 1520 or 1717 1650kv motors in 8s. The 1520 is just as strong as the 1717, but heats up easier. I run the stock pinion that came in the box with the 1520, but the 1717 will pull at least a 15 tooth pinion with no heat issues. I've found running th Proline belted MX-38's really help the driveability when running 8s. Some people complain about a lack of air control with the belted tires, but on this truck with my setup, there is plenty of tire weight and wheel speed to flip on command. I also use the auxillary wire set up for torque control, for times when I want to keep all tires on the ground hooking up for maximum control. I just leave channel 3 turned on when I am racing around, then turn it off for full punch when I want to wheelie, jump, and flip. Now I have purchased a spare motor mount from Jenny's Rc, and have both motors mounted with pinions, ready to swap quickly. I have a 21 tooth pinion on the 1520, and a set of smaller race type tires off a Hobao Hyper SSTe that I plan to run on the local track until I can afford a new race track only dedicated platform. With the smaller tires on 4s, the 1520 pulls strong with the 21 tooth pinion, without getting hot. My last test run the motor temps topped out at 127F, and ESC was around 117F running hard in grass.

I have the kraton 1/8 exb running the castle creations mamba x 8s esc and the 1717-1260Kv motor with dual 40x40x28mm powerhobby twister high voltage fans on the motor and 1 on the esc , solid fixed center diff with 46 tooth spur and 25 tooth pinion. Upgraded the front and rear diff with hardened gears and aluminum diff cups. Agfrc 55kg servo, rpm arms and wing mount, full line up of Just bash it rc upgrades including chassis,towers,battery tray, wheel hexes, ect just about every part they offer lol. It's a beast absolutely bullet proof. Able to land hard from 40 plus feet high and just keep going like it was nothing. Honestly it's the toughest rc car I have ever had or seen. Now I'm starting the process of building the 1/5 kraton exb to be just as bullet proof and it will be running on 12s-14s...... DOES ANYONR HAVE ANY SUGGESTIONS FOR UPGRADED SHOCKS FOR MY 1/8 KRATON ALL EXTRA WEIGHT I NEED SOME BEEFIER shocks

I have max 6 with the 1650kv motor with 17t pinion Temps on a warm day 148 with fans.

Hobbywing 1650kv is the sweet spot!!! 6s with a 20 tooth pinion standing backflips easy rolling backflips up to 10mph…… you’ll love it!!!

Thank you my wife ordered me a max 6 set thinking it was for 6s Kratons totally installing them

That's great speed. If Kraton had wings, it would fly into the sky. It's a great video.👍👍👍

On the Arrma forum, I was told to scrap the heat sink and run two fans on the motor directly because the heat sink actually holds heat to the motor instead of getting rid of it all

I just got a Kraton V5 BLX. It’s still in the box! Once I decided to do videos everything slowed down because you gotta plan. The used Limitless that I bought to run at Warm Springs in Fremont came with the Spektrum 160A/1250Kv setup. Thinking I’ll swap systems and get better speed out of my Limitless and more grunt out of my Kraton. Probably do the metal diff cups while I’m at it, which I just did in the Limitless.

Hi I have an erevo 2.0 and I upgraded all the electonics to a TP Power 4070CM 2200kv motor and Castle Mamba XLX2 and I run it on 8s with gearing 20/46. It has circa 12+hp. The thing is a monster so I have to be gentle with the throttle. I usually rarely get more than 50% throttle as it accelerates so hard and it has awesome top speed. But I keep a hawk eye on motor temps seeing that the gearing is fairly high and I use a fan. I can definitely recommend this setup for an 1/8 scale basher/truck!

Insane power, I currently have the stock electronics on my 8s Kraton... I love the power yours showed, But the motor concerned me a little.. of getting that hot with only a 13 tooth pinion, I run my Kraton with the stock 1250kv motor, and a 23T, and the motor stays pretty cool, Yeah I have the heastsink and fan, but 23T to 13T pinion is a huge difference,

I did the exact same thing with the exact same setup today. I purchased it used last night. Played with it on 8s on the max6 and 1650 and as I was bringing it back to pack up it sounded like the diff locked up. I'm also glad it is the motor. It's all locked up 😅😅 mine also doesn't have fans yet

Honestly not sure that motor is meant to handle 8s Francis. It’s really a 6s sweet spot on those motors. Lol. Great vid and that’s what the hobby is all about. Having fun and mixing it up. Also fixing it up! Haha

Have a kraton 6s v5 blx put in hobbywing 4985 motor with max 6 . Have a power hobby fan that runs independently on a 3s battery at Luke 30000 rpm on on 6s run 19.tooth on 8 22 tooth but it's a 1650kv motor so need bigger pinion.for rpm

Nice video Im going for the kraton 4s this 6s beast is already on my list next thanks for sharing

I run a max6 1650kv 20T pinion and on 6s it will do standing backflips if the punch is set to 5 but it’s almost undrivable so I run the punch at 3. Run 500k in the center diff. 👍🏻

Hi mate great video I've got 3 kratons and one I run max 5 esc with 1250kv motor on 8s and it's a animal. One of the other one's I run max 6 esc with 2200KV motor 6s and it's goes great and all with fan. Keep the videos coming 😁😂

I put a hobbywing xr8 plus with the matches G3 2200kv motor. Still 6S but 200 amp instead of 150 into my Arrma Talion 1/8 scale. On 6S I have to keep an eye on the temp but it’s insanely fast. Even on 4S it’s faster than stock motor n esc on 6S.

It’s me again …love that you’re showing some bashing action … but drifting…drifting..drifting.. sorry trying some text hypnosis ..lol .. last time you said there are no local tracks 😔.. if you build it they will come 😱🤔

I can do backflips like that on my Kraton 6s running a Castle Mamba Monster X 8s and 1717 1650kv motor with 18T pinion and standard spur gear on a CNHL 6s LiPo. I only do one flip at a time. The 1717 is a beast! I run 10k rear diff fluid, 300k center, and 20k front. I do have a 40mm fan on the motor.

Hey since you broke the motor now can you put in a 1100 Kv motor that's like the size of the 8S max6 motor but run it in 6s?

I love my Kraton

Great video. Don't see the point though. 6s is already a ton of power for speed, standing back flips etc... Unless u set up 8s and run 6s to avoid heat. Or doing speed runs. Best and cheapest option is add 500k to mil center diff lube. Generates more power to all wheels and saves the trouble of 8s swap. Just my opinion though. Mine is stock 6s and a beast on 16t.

I’ve been running the Hobbywing Max6 ESC & 4985 1650kv motor combo, 19t pinion on 6s. Try the larger 4985 Hobbywing motor 😎

probably melted the adhesives inside the motor that hold the magnets

Awesome video you need to try the 1650 with a 20 tooth on 6s it's a beast

There’s a saying in the mountain bike world “ Your not a real mountain biker till you’ve broken some expensive parts”. Just saying. I learned my lessons to not over tighten mtb parts. I know your not going to leave that Fireteam stock. I recently received mine & I’ve had it out on 6S but without the speed pinion in yet. And it’s incredible stable at speed. Even without a gyro it corners super good. Please make a few videos on upgrading it because a lot of people have them know & are very interested in upgrades. I’ve seen a few that have shock mount or frame carbon pieces & also carbon body parts. It runs so well box stock I’m just curious as hell what could be done & in what area of the vehicle would benefit the most for upgrades. I’ll be waiting for any info for sure. Also any recommendations for a full electronics upgrade for a Senton 550 mega brushed short course truck?

I have already replaced the motor with a NU castle 1515 2200 kv and steering servo and now I'm having too replace the chassis and the center drive shafts and drive shafts because they are bent lol by the time I get done replacing everything I could have went and bought the 1/5 kration

also you can try the spektrum 1250kv 4685 size can that is small and was made for 8s. i put the kraton 8s system into my mojave. 23 tooth pinion . the mojave exb is half the weight of the Kraton 8s. I can't put it into words!

Thank you for sharing Francis. Which differential should I put heavier fluid into if I want my Mojave Exb to wheelie more? I want the opposite of what you want 😁

Pretty much replacing it all even having to replace the plastic peices that come with it already

That motor is only rated for 6s that's why it went bang. You should have used 5687 1100kv that's a 8s motor.

I run and max6 with the surpass 4092 1730kv motor on 6s and it’s a beast standing backflip all that and only using 17t pinion

Great vid! Max6 combo or max8 g2 combo? I saw you have had both now. Thanks!

I have the kration 6s exb I bought it used and the guy said that I could run 6s or 8s batteries with the same ecs I know it's something similar to the one you have I think lol but the only down fall I've had with it is it was supposed to have a bunch of upgrades on it it had some but the biggest thing is that he put a metal bar in it to replace the kration center brace that was a major know know it literally drawed the chassis up to shock tower' to shock tower so now I have to replace the chassis and build it pretty much all over again so by the time I get done with the rebuild I'll have a brand new kration back to spec's

for 8s im running the spektrum max6 copycat with 1250kv spektrum motor 17tooth pinion fucker rips good man

My mt410 is at 9kbs or so i think I’ll get it on a scale but it does backflips standing on 4s.

I have the Spektrum 8S but I don't run 8S only 6S woth 21/50 . I also try 29/50 but power level will dope low voltage and than recover . I dont know what Yeats from😊

What kind of temperatures would be the max for that 1650 motor?

I got a max 6 esc with that exact same motor 2200kv in my traxxas widemaxx v2 I need to change up the diff oils but it handles punch 5 on 20/54 Slides and wheelies for days just in process of updating the servo and some new tyres too couple vitavon bits on there for the weak spots but not too much on the added weight things un real tbf I want to get this setup soon though new kraton amd 8s it!! Hopefully it punches harder than the max do you think I can run my max on 8s with this combo without anymore complications

If that's a hobbywing EZRUN-SL 4274 2200kV then it's only rated at 6s? according to hobbywing spec, what motor is it?

Might need a new chassis soon I know you say it's a newer chassis but they are weak and bend so easy if your not jumping high you should be good

What 4s batterys did you fit in this 1/8? Thx

Dude, I'm still dealing with getting my 3S Typhon back up and running lol!

try a max 5 and leopard 1000kv for your Kraton 8s 1/5

Need advice: My Firma 150a ESC burned and I would like to replace with a better one. Do you recommend the max8 or max6? It has spectrum 2050kv motor. Thanks!

Thicker r differential food will give you your front end more control and stayed down I think you have wrong

What is your take on the new hobby wing motor the 2050 motor plus I don't know if I want to get the ecs that is paired with that motor or should I keep the ecs in it that I already have

Wow galing pare

I swapped a spektrum 1250kv/160a into my k8...it was just too much imo....and hell on my diffs.

How is it holding up? Any upgrades you have or recommend?

try 8s with the 1650kv 17 tooth with fans

❤❤❤

My stock kraton 6s will do standing backflips with punch on 4

what kv is that motor your running on this video?

I got exb with castle 8s 1717 1650kv motor and run 17t and never even ran it yet on 8s it does standing back flip on 6s and so fast haven't tried the 8s yet also mojove spectrum 8s esc and leopard 1600kv loads of fun few other beefed cars also all over powered but hardly never run the at full potential until someone heads little to big then show them real power.lol keep up great work and rc juice has a 1730 kv 4092 6s but need run a max 6 because of amp runs like 8s and loads of power work great in kraton and mojave great price .

so your running 8s on a 2200kv motor?

"These Are Easy To Replace $100 Motors" Man, That's A 7hrs Of Hard Work For Me..Lol! 🙁 My Wife Would Go Furious, If I Bought A Expensive Part Like That..Lol! That's Why Don't Go Heavy Bashing, I Mainly Just Run It @ The Park Or @ A Big Empty Parking Lot..😔 #Wishiwasrich

I have max 6 1650kv in my mojave. It honestly has too much power on 8s. I do however get cooler motor and esc temps when I run 8s vs 6s 🤷‍♂️.

I’ve been thinking about going 8s on my Kraton. I’m just afraid I’m going to tear the truck up even worse

Also is max 6 perfect fit?

Try HW1650 it's a beast in my Mojave

no diff problems at all?🤨

No fan on the motor? with hobbywing is a true recipe for disaster 😁😁😁 and my Kraton on 6s with monster x 8s does backflips to

It's leaving rubber on pavement lol

Get it in some grass field!