Тёмный

Arrma Limitless GT 8s Parallel Build! More Carbon Fiber & More Power! Raz Perfect Pass!  

Zagert
Подписаться 4 тыс.
Просмотров 4 тыс.
50% 1

Arrma Limitless GT 8s Parallel Build! More Carbon Fiber & More Power! Raz Perfect Pass! #arrma
In this video we set up the ol' Arrma Limitless GT for 8s parallel! That's right, we set this car up to hold four speed run batteries from CHNL to push my giant TP motor to the limits! We installed Raz Shifrin Perfect Pass V2 Carbon Fiber drive shafts, carbon fiber parts from RamJam Racing and more parts from Scorched RC! Along with maintenance this video is packed full of speed running fun, enjoy! Links to the Arrma Limitless GT original build video and all new parts installed in this video are included below.
Arrma Limitless GT Build
• Arrma Limitless GT 150...
Raz Shifrin Perfect Pass V2 Carbon Fiber Shafts
www.amazon.com/Carbon-Drivesh...
RamJam Racing Carbon Fiber Wing Parts
www.ebay.com/itm/125104247557...
Scorched RC Battery Strap Stands
scorchedparts.co.uk/products/...
QS8 Parallel Connectors
www.offshoreelectrics.com/pro...
CHNL g+ Batteries
chinahobbyline.com/products/c...
RC4WD CVD Shafts
www.ebay.com/itm/334203578604...
Battery Straps
5 Pack 16mm x 300mm HD Rubberized Battery Straps Non-Slip - Apex RC Products #3021 a.co/d/0tORCwx
BSR Foam Wheels
BSR Racing Tires 1/8th Buggy Foam... www.amazon.com/dp/B002LMA2IU?...

Развлечения

Опубликовано:

 

16 сен 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 49   
@m.p1976
@m.p1976 Год назад
So great Video! And a Crazy Night Run! Mega !!!!!!!!
@zagertRC
@zagertRC Год назад
Thank you!
@M2C_Kraton8s
@M2C_Kraton8s Год назад
Raz SHERFIN driveshafts are bomb lol
@zagertRC
@zagertRC Год назад
😆🤘
@bernidampfff
@bernidampfff Год назад
Nice build and nice Video ! Cant wait for more
@zagertRC
@zagertRC Год назад
Thanks you! Definitely more coming soon!
@LicketySplitFPV
@LicketySplitFPV Год назад
Pro tip dude. Those holes in the scorched battery holders are templates for drilling. Keep up the good work!
@zagertRC
@zagertRC Год назад
Thank you, much appreciated 💪
@robertshelton2605
@robertshelton2605 Год назад
I talked you today when you were doing speed runs on Alameda while I was driving my bus. Just realized I already been following on RU-vid for awhile. lol
@zagertRC
@zagertRC Год назад
Oh HI! That was so cool talking to you today! And that's hilarious that your already on my channel 🤣❤️
@JPRC_CRAZINESS
@JPRC_CRAZINESS Год назад
Such a beast rig! I couldn’t imagine running that fast at night 😮👊🏻💪🏻
@zagertRC
@zagertRC Год назад
It's actually easier to run at night😅
@JPRC_CRAZINESS
@JPRC_CRAZINESS Год назад
@@zagertRC probably easier to see right? I immediately thought it was scary af but I also live in a town with no street lights🤣
@zagertRC
@zagertRC Год назад
@@JPRC_CRAZINESS Yeah the lights on the car just make it so much easier directional wise. During the day sometimes I question if the cars even facing the right way🤣
@fitfiz
@fitfiz Год назад
Great built, new subscriber
@zagertRC
@zagertRC Год назад
Thank you, and welcome 😁👍
@alterdcustomrc4512
@alterdcustomrc4512 Год назад
I love the car and the light setup. Great straight passes
@zeisslersrccars9696
@zeisslersrccars9696 Год назад
145 on a warm up pass…. Cool
@eddieepicmedia
@eddieepicmedia Год назад
Great video Zagert. Really good editing , music and overall content. Thank you.
@zagertRC
@zagertRC Год назад
Of course! Thank you❤️
@escobar-rc-sinnerz7108
@escobar-rc-sinnerz7108 Год назад
Nice build like it bro
@Pavestar1
@Pavestar1 Год назад
🤙🏻🤙🏻
@gurtaajdhillon7709
@gurtaajdhillon7709 Год назад
Hi, what would the benefit of running parallel be other then longer runtime? Would series be better for setup such as MMX8s and a TP 4070cm 2200KV on 8s with 2 4S batteries?
@zagertRC
@zagertRC Год назад
Parallel helps with voltage sag when pushing higher speeds
@nutsnbolts4601
@nutsnbolts4601 Год назад
Hi brother I have a question 🙋‍♂️ why do u run so many battery’s When runing 8s ? I see other speed runners only use 2 4s ? Also love ur videos ur Geting really good at speed runs man 😅🎉
@zagertRC
@zagertRC Год назад
These batteries are only 5000mah, so they're pretty small. My TP motor draws so much power that the single batteries would have way too much voltage sag and cause the top speed to be slower. Doubling the batteries doubles the MAH to 10,000 instead of 5,000. It's basically like Running two big batteries instead of two small ones. I'm not the best at explanations, so I hope this helps a lil😁👍
@nutsnbolts4601
@nutsnbolts4601 Год назад
@@zagertRC Definitely helps I’m not the best at understanding this parallel Or and series and all that great stuff lol 😂 anyhow great car u are kicking ass man
@zagertRC
@zagertRC Год назад
@@nutsnbolts4601 Thank you! Much appreciated! I just learned about it before I built it🤣🤣 But basically parallel just doubles the MAH of the batteries and runs the same voltage 💪
@christopherpalusak2510
@christopherpalusak2510 Год назад
Is the 1/5 scale 2400kv motor good for big pinions.
@zagertRC
@zagertRC Год назад
Most likely not. You have to be careful with any scale with higher kv
@killaharliii4797
@killaharliii4797 Год назад
Nice build man! What do you think caused the scorched drive shaft to pop out?
@zagertRC
@zagertRC Год назад
Too much vibration which causes too much heat. Completely snapped my drive cup and blew the differential. I wish I knew what the problem was, but I truly never figured it out. I've been running RamJam drive shafts with absolutely no problems now💪
@killaharliii4797
@killaharliii4797 Год назад
@@zagertRC Thanks bro! I actually just ordered a Pinocchio spool im hoping it doesn't happen to me lol.. I'll probably order the ram jam as well I've heard good things abt them after i ordered the scorch spool lol. Keep up the good work!
@zagertRC
@zagertRC Год назад
@killaharliii4797 Thanks! Much appreciated 💪 I had a few really bad wreaks with my scorched parts, they could've been bent or something causing issues. But I love all the parts I get from them.
@frazierboytellem3669
@frazierboytellem3669 Год назад
What center spool are you running?
@zagertRC
@zagertRC Год назад
Stock spool. Just aftermarket furniture. Mugen drive cups, abec 7 ceramic bearings, scorched rc Spacers and saga gears
@escobar-rc-sinnerz7108
@escobar-rc-sinnerz7108 Год назад
Serious question are the tp motors Amy good
@zagertRC
@zagertRC Год назад
I love mine. A ridiculous amount of power. 💪
@escobar-rc-sinnerz7108
@escobar-rc-sinnerz7108 Год назад
@@zagertRC I was thinking a 6s but my limitless project top secret 😂 got a castle 1717 8s have not tryed it in a full run I'm in Chicago hard to find good spots
@maddogrc3688
@maddogrc3688 Год назад
Can I ask what tp motor your running
@zagertRC
@zagertRC Год назад
It's a 5680 1440kv motor. Probably the most solid motor I've owned 💪
@maddogrc3688
@maddogrc3688 Год назад
I was watching the video and just the way the car sounds to me it's like music to my ears
@zagertRC
@zagertRC Год назад
@@maddogrc3688 It has a lot of power and took a long time to dial in, but I hit 168mph not too long after this video.
@maddogrc3688
@maddogrc3688 Год назад
😱 very nice
@escobar-rc-sinnerz7108
@escobar-rc-sinnerz7108 Год назад
U have good eyes at nite
@ramjamracing
@ramjamracing Год назад
Shoot me an email! Lets get some more RamJam parts in these builds!
@zagertRC
@zagertRC Год назад
I messaged your page on Facebook 💪
@toysforboysrc
@toysforboysrc Год назад
Hmmm…. Just subbed. Never seen you before but I see you now..😉🫵
@zagertRC
@zagertRC Год назад
Awesome, and welcome 😁👍
Далее
New GT Build
15:42
Просмотров 1,1 тыс.
HYDRAULIC PRESS VS TITANIUM AND CARBON FIBER PIPE
12:03
БИМ БАМ БУМ💥
00:14
Просмотров 4,7 млн
DIY Forged Carbon Skinning Tutorial - A Complete Guide
11:41
BMW Carbon Fibre (CFRP) - PRODUCTION
10:06
Просмотров 6 млн
3D Printed Hydrofoil with Sonar
24:20
Просмотров 275 тыс.
The Real Reason Robots Shouldn’t Look Like Humans
1:27:20
Arrma Limitless GT 150mph+ RC Build
14:40
Просмотров 7 тыс.