Arrma Senton 3S BLX Full Steering Upgrade!

Подписаться 135

Просмотров 7 тыс.

50% 1

Here's the full video of a full steering system upgrade I did on my Arrma Senton 3S. I was going to edit this down but figured upload it all and then you can skip around if you wish. As we all know, the steering leaves a lot of be desired on these, especially after some abuse. So I swapped everything out with some more robust parts. Nothing lasts forever, but the steering is very snappy now and more responsive for sure. However, even with all new parts there is still a bit of slop. It's minimal, but it's just the nature of the beast with these smaller vehicles. If you run one of these trucks a lot and have noticed the steering becoming quite excessive over time, consider some or all of these parts for an upgrade. The inserts for the servo gave me a bit of a problem but that was purely on me as it was late and I wasn't paying attention. haha Hope the video helps, Enjoy!
The parts I used were...
Hot Racing Aluminum Bellcrank - #ATF4801
Hot Racing Steering Servo - #ATF48SH02
Hot Racing Pivot Ball Set - #ATF160B02
Arrma Rod Ends - Arrma #AR330470
Spektrum High Torque Steering Servo #SPMSS6020
#thanumgaming #twitch #affiliate #streamer #arrma #senton #steering #upgrade #spektrum #hotracing #rccar #rctruck #radiocontrol #wrenching #spinningwrenches

Игры

Опубликовано:

21 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@EDDIETYPER Год назад

Nice upgrades. Getting my senton 3s in a couple days. Glad I came across your videos 💪🏽

@thanumgaming Год назад

Thanks! Congratulations on the new truck! Do you have other vehicles as well or will this be your first? They are fun trucks. Wait till you pull the trigger with a 3s in it, these trucks move!

@EDDIETYPER Год назад

@@thanumgaming first one.! a couple of my buddies have them and we have a dirt track close by. Had no idea how cool it all is.

@thanumgaming Год назад

@@EDDIETYPER That's great! Welcome to the hobby! Be sure to follow the main rule, are you having fun? Then you're doing it right! It really is a great community overall. Eventually you'll come to a very hard question about it though... what one do I buy next?! 🤣🤣

@cxwrench1 Год назад

Put these parts in my Senton today, thanks for the video, made it easy!

@thanumgaming Год назад

Great! Have ya taken it out for a rip yet? I got a set of road tires for mine recently and noticed it cogs slightly at take off, so will drop a couple teeth on the spur to fix that.

@cxwrench1 Год назад

@@thanumgaming It's been dumping here in the bay area, hopefully I can get it out this week. Might have to try the pavement tires, sounds cool!

@thanumgaming Год назад

@@cxwrench1 Gottcha. The pavement tires I went with are the Duratrax Banditos. Part number DTXC5270. Best of luck!

@cxwrench1 Год назад

@@thanumgaming Thanks for the info!

@i4nic256 Год назад

I've seen bad reviews about the HR servo saver for the 3S.

@thanumgaming Год назад

Uuh ooh! Thanks for the feedback I will definitely keep an eye on it. Was it an issue of a weak spring or would the teeth strip out type deal?

@i4nic256 Год назад

@@thanumgaming I’ve seen bad reviews in a few different places. One example is Amain hobbies: check the feedback in the review section of that servo saver. The stated specific problems they had with the design of the HR servo saver. Hopefully the bellcrank is designed better because that is something I’ve been interested in swapping. Cheers

@noname-ge3tz 7 месяцев назад

nice vid liked and subscribed bunch of ppl race in a parking lot with sentons and infractions and 1/10 scale and i could use some help getting my senton set up for fast cornering

@wayneirelan5531 Год назад

servo doesn't true unless u turn on ur transmitter with the car. turning on the car by itself the servo will just sit in whatever position it is in. but im sure a couple of love taps will straighten it all out.

@thanumgaming Год назад

Good point. I didn't even think about it. I physically centered it before even filming the video to make sure and it was only a tooth or two off luckily. The steering has been working well. Thanks for checking out the vid.

@thenewbrc1382 Год назад

Sweet. How has it held up?

@thanumgaming Год назад

So far so good! It definitely tightened things up a bit and the new servo is definitely a bit more responsive. Unfortunately, it didn't take ALL of the slop out, but that's next to impossible with these designs and plastic parts. A definite improvement overall though and everything is more durable and less likely to break when I run it into my legs at full speed! 🤣🤣

@isiha1068 10 месяцев назад

Mine’s won’t turn left or right

@thanumgaming 10 месяцев назад

Stock or after this upgrade? Does the steering servo make any noise? Check your steering rate adjustment (knob on transmitter), or possibly something came loose up front like the servo horn.