Arrma Typhon 6s "Truggified vs Hybrid Outcast Setup Explained" street style rip...

Подписаться 27 тыс.

Просмотров 29 тыс.

50% 1

Decided to get my Truggified Typhon dialed in for some street fun for a bit. Have now finally upgraded to Voltage Hobbies shock towers on all 4 of my Arrmas. Perfect fit and finish and WAY stronger than stock. Didn't realize how bent my stock rear Typhon tower was until I had to pry it off the diff case...Lol. This video discusses the difference between a "Truggified" Typhon and my "Outcast Hybrid" with general setup info. Still get a ton of questions regarding both rigs and was hoping this vid would help clarify and provide some answers. My "Orange Darling" probably won't stay red for long. Props to Arrma for making such killer fun and versatile rigs!!!

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 166

@TedBackus 5 лет назад

This is why i always lean toward buggy or truggy rc. They are by far the most versatile. When you buy something like a monster truck or even something like a stampede, you get such a high vehicle ,that rolls over constantly and there's only so much you can do without seriously re-engineering it's design. Of course taller trucks have their place, but when you're serious and you've been doing hobby or see you for a long time you learn what you want, and what's the smart purchase. I started in the hobby in 1983 ,and although I've stopped periodically ,my tastes havent changed all that much. But right & You won't end up like one of those guys with 10 or more ready to run trucks sitting on shelves in his shed

@richduperbash2966 5 лет назад

I couldn't agree more with you 😂!!! I too started in 83 😱. Had a super long layoff, but happy to be back 😍. Appreciate the comment my friend.🍻🤘🤘😎💪👊👊

@vinsanitysmet 5 лет назад

I did this to my talion V3 and I really like it because car sits low and has a wider stance now. I love it! Thank you for all your amazing ideas.

@richduperbash2966 4 года назад

Thanks Vinnie 🤗!!!! Just saw your comment 👀👍👍😎💪👊👊

@anthonyarnold906 6 лет назад

I think when I get my collection complete I ultimately want a kraton and a typhon. While I would love to have a outcast I think I would rather have the typhon so I can have a buggy and switch to an outcast if I really wanted. Just so versatile. Kudos to arrma for doing things the way they do. It is a brand that I think is number one in the rtr bashing rigs. Thanks for this video brother

@JKZ103 6 лет назад

I now want a trugified typhon to add to my collection! Yesterday I was out bashing with my mt410 and kraton and came across a guy with a kraton as well. Out of the millions of people he was too a rich duperbash and korh subscriber. Love the channel and as far as I'm concerned I don't see how you only have 800 subs... you have some of the best videos and should have thousands of subs. Love the content and keep it up rich. I will continue to spread the word bro!

@richduperbash2966 6 лет назад

J Ho thanks so much brother, really appreciate the kind words. Gary was going to come down and bash with us today, but I had to change plans unfortunately cuz of the holiday. Thought I had family coming to visit. Hoping he can get down 2 weeks from now. Happy bashing my friend!!!👍👍😵😵😵😲😱😎👊👊

@rcjer6473 4 года назад

Thanks for the explanation and the run bro. Great stuff as always

@richduperbash2966 4 года назад

Thanks Brother 😊. Really appreciate it. 🍻😎💪👊👊

@Rotskippy19 6 лет назад

My first rc car Typhon V3. I love it😍

@richduperbash2966 6 лет назад

Rot Skippy that's a GREAT first RC😂!!! You bypassed the pain of plastic driveshafts and never ending breakages with a lower end rig👊. Good for you brother 🍻. Enjoy it!!! 🤘🤘😨😨😨😎💪👊👊

@72nivo 6 лет назад

She sure rips on road ! Love it !!! It’s like the old days..... U should have jumped that mini van 😆😆👍🏻👍🏻🤘🏻☝️

@richduperbash2966 6 лет назад

72nivo thanks so much brother!!! She's a quick little bugger no doubt. Yeah I should've pulled the ramp out. That chassis would've slid right up it. Thanks again for the servo tip. Got one waiting to drop in my new Proline if Tower ever sends the damn thing...Lol.😲😲😲😵😰😎💪👊👊

@RCbashingtheKRATON 6 лет назад

Got to love the typhon,,,Fast and tough..Bash on bro

@richduperbash2966 6 лет назад

RCbashing the KRATON thanks brother, still the best value RTR in my mind!!! Such a little ripper. I'm ready to get her back in the dirt already...Lol. Hope you're getting out bashing brother!!! 👍👍😵😵😲😱💪💪💪💪😎👊👊

@proudcanadiansteinke9619 6 лет назад

Dame the typhon gose nice rip bro looks sick with the new towers love that alum look

@JN396 6 лет назад

Sick bash man! Really need to get one of those! 😎👍

@richduperbash2966 6 лет назад

Juju thanks so much brother!!! The Typhon is Arrma's bargain BEAST in my mind. Such a fast, versatile little bugger. Tough as nails, too. Totally underrated as a basher. Almost bought a V3, but can't justify it already having this little ripper.👍👍😱😲😲😲😵😎💪👊👊

@painintherc7771 6 лет назад

Awesome stuff man! Good to see them side by side and what's needed to build these beasts 👌👍 really wish arrma would sort out some realistic UK stock!!! I just can't justify the shipping cost and waiting for parts, im too impatient 😂 can't really blame arrma though, there's loads of decent rc's we can't get!! I guess rc just isn't popular enough here! I've always run a fan on that 2200kv castle motor, even gets hot in the lightweight slash without one. Thumbs up as always rich your videos are always mind blowing or educational 👊👍

@richduperbash2966 6 лет назад

Pain in the RC thanks so much brother!!! That sucks about Arrma availability in the UK, I've heard that from others on the Forum as well. Yeah my Hobbywing 2200 can get toasty too when geared a bit tall. I don't drift about with that setup very often...Lol. Those wheels spin like MAD but are super fun to rip once in awhile. Still run my Truggified on 4s off-road with the Monster X and temps have been good. Happy bashing brother!!!👍👍🍻😵😵😵😲😱😎💪💪👊

@PeterWeber 6 лет назад

Nice video Rich. Loved the "Uuhhhhhhhhhh" :) Nice explaining of how you hade your RCs.

@richduperbash2966 6 лет назад

Peter Weber thanks Peter, hope it helps clarify the difference between the 2 rigs cuz many viewers are confused about them.🤔 I keep getting the same questions about the Truggified especially. 🙋🙋😨😰😲😲😲😵😎💪👊👊

@PaulOff-RoadDownunder 6 лет назад

What a little screamer !! I think I'd enjoy a truggified Typhon.... Just wish I could find a Typhon roller over here in Oz. That was seriously quick.... Reminds me of my 2-strokes.... miss my throttle !! 👍

@richduperbash2966 6 лет назад

RC OFF-ROAD DOWNUNDER thanks so much Paul!!! Felt good to get the Typhon cleaned up and dialed in again. She'd taken some pretty mean beatings the last several outings...Lol. Those little G-LOCS get up to speed quick!!! Even with stock electronics, the Typhon is Crazy fast. To me it's still the best value RTR you can buy. Wish I had the new V3 shocks, but I'll probably upgrade at some point. I was a 2 stroke dirt biker back in the day...Lol!!!🙋🙋😲😲😲😨😵😎💪👊👊

@PaulOff-RoadDownunder 6 лет назад

Rich Duperbash Yeah Rich I recall your prior passion for dirt bikes....me too ! I rode for years & raced enduro. Always thought I might have a gas or nitro RC.... But just not really practical for what I enjoy doing with RC. A mate I used to ride with in Western Australia carved a career for himself in dirt bikes, and has become somewhat famous making short movies. Here's one of his all time most watched... And the KTM300 was my last bike. Anyway.... Slightly off topic but great memories 👍 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--cwImtQw3WA.html

@richduperbash2966 6 лет назад

RC OFF-ROAD DOWNUNDER that was AWESOME Paul. Reminded me why the 2 stroke is such an incredible creation. The powerband in higher RPMs is something I'll never forget. Thanks so much for sharing the vid. Awesome display of skilled riding. 😎💪👊👊

@xnetshadowx 4 года назад

Quick question, did you have to change the arms front and back to accomodate?

@dirtrider88 2 года назад

8:24 how hot was your battery? although not the same car i had motor and esc temps like that yesterday when it was 90+ degrees out and my lipo (hard case) was at 145. also put the temp gun right up to what your measuring. the signal or whatever come out of the gun in a cone shape, the further away you are the more things its taking the temp of.

@richduperbash2966 2 года назад

I can't recall how hot my Lipo was 🤔. Vid is almost 5 years old. Lipos past 135F is getting toasty 👀. Likely shortens the packs useful life, ability to balance, and increases IR or internal resistance. 🍻

@jdpaslRC 6 лет назад

RC for life 👍😎🏆

@richduperbash2966 6 лет назад

jdpasl you know it brother!!!👍👍🍻😵😵😵😲😨😎💪👊👊

@mtctookie25 6 лет назад

Rock & Roll Rich!!!

@atkracing 4 года назад

Are the diff ring gears the same tooth count between the Typhon and kraton. Or are they different ring gears?

@richduperbash2966 4 года назад

The ring and pinion are different between the Typhon and Kraton/Outcast/Talion. Typhon uses straight cut 13T input/pinion and 43T crown/ring gears. Kraton uses 10T and 43T spiral cut gears. 🍻😎💪👊👊

@12R1rcbashr 6 лет назад

Awesome video Rich the Typhon is lookin awesome brotha definitely tons of fun on the street I am gonna truggyfie my son v3 Typhon for sure happy bashing bud🖒🙈🙉🙊👊✌

@richduperbash2966 6 лет назад

12R1 thanks brother!!! I know the size explanation/comparison was already common knowledge for most, but apparently many still don't know the Typhon has smaller towers, shocks...etc. Keep getting the same questions about this stuff...Lol. Hope this vid helps clear up the confusion since I started running my Hybrid 😲. That's killer about your son's V3!!! The Typhon is a totally different animal in Truggified form. Happy bashing brother, hope the weather is good on your end!!!🙋🙋🍻😲😲😨😵😵😵😎💪👊👊

@shaggysgcanimal 5 лет назад

My typhon is set up like this but still using buggy tyres as I've no idea what to use. I see you use the mx2.8 but every proline tyre I buy just gets shredded and I find myself going back to cheap Amazon specials all the time. Any tips for the tyres. Or is gorilla tape all you used?

@richduperbash2966 5 лет назад

You really have to either tape or braid the MX28's or Trencher 2.8s as well as vent them to control ballooning. Another option to consider is the new Proline MX buggy wheels. They have big lugs similar to the MX28's, come vented, and use closed cell foams. Definitely better for mixed bashing than traditional buggy wheels. 😎💪👊👊

@shaggysgcanimal 5 лет назад

Cheers mate I've seen the trenchers think they will be the better option. Only rated to 75 but I'm not really a speed guy. Thanks dude

@richduperbash2966 5 лет назад

@@shaggysgcanimal I'm regretting buying my Belted Trencher 2.8s 😬. Like I mentioned in my last Typhon vid, just too heavy and bouncy. The weak plastic hexes are the biggest drawback in my mind. Hopefully Proline will improve the design. The concept is great though. 😎💪👊👊

@shaggysgcanimal 5 лет назад

There are some very expensive aluminium hexes lol or maybe lee Wood could knock some up

@richduperbash2966 5 лет назад

@@shaggysgcanimal yeah I bought a set 😱. Now I have 180$ into a set of 2.8s I really don't like that much 💩🤐🤐

@WilliamJaySmart 6 лет назад

Great video,so much awesome info. Interesting to me you use 40 and 50 weight shock oil and you go bigger than I've ever seen. And all the people on the arrma Forum swear by 60 and 70 weight. I'm definitely ganna try your all around set up in my kraton next rebuild.thanks for the awesome video and knowledge.Bash On!

@richduperbash2966 6 лет назад

Willim Smart thanks so much brother, really appreciate it. Yeah I LOVE the Arrma Forum and was also a 70/60 guy before, but it's honestly better to have easier chassis slap and break less shock parts especially with Tekno Oranges in front and Yellow in the back. I've been pretty vocal about going lighter as I've experimented and learned for personal BIG air experience, but too each his own...Lol. Happy bashing my friend!!!🙋🙋😨😵😵😵😲😱😎💪👊👊

@GreatLakesRC 6 лет назад

Nice explanation! I always knew what you meant about the outkast hybrid but never really knew what you meant by a trugified Typhon. I actually thought you meant that you put Kraton arms on it lol! Love the street driving 👍👍👍 I do lots of street driving myself. I do have a suggestion for you. If you want to maintain your gearing and switch from off road to onroad the SRC road crushers will accomplish that for you. They are about the same size as a truggy tire but are wider and belted for the street. I actually went through a set using it on my Talion and MT410. You have probably already seen those tires though, lol!!

@richduperbash2966 6 лет назад

Aaron Weycker thanks so much brother!!! I'm hoping this vid helps clarify the terminology somewhat cuz lots of people ask me the same questions...Lol😲. Once I started bashing my Hybrid, it got even more confusing I think. Perception is a funny thing, especially through a GoPro lense I think. I have a set of SRC Terrain Crushers that I use pretty regularly on road, especially to help get my rigs tuned and dialed in. Went with those cuz the reviews were a bit better than the Road Crushers and I wanted to do some mixed bashing with them. Appreciate the suggestion brother. I have too many damn wheels now...Lol. 🙋🙋😰😨😱😲😲😲😵😎💪👊👊

@TruSwagTv2 5 лет назад

nice rin brother i love the typhon such a fast car all your builds the best 🤘👌💪✊💯

@richduperbash2966 5 лет назад

Thanks Brother 👊!!!! The Typhon platform is still my favorite 😍😎💪👊👊

@robfurlong85 6 лет назад

Does the outcast battery tray fit in the v2 Typhon as is or did you have to modify something? I really hate the v2's battery tray!

@richduperbash2966 6 лет назад

Robert Furlong the Outcast battery tray uses the same screws and set posts, but the rear ones are about 1" closer to the fronts in total span. If your chassis doesn't have extra holes for the battery tray, you'll have to drill them. I did this to 3 of my Arrmas. The Outcast battery tray is way more protective no doubt. 🍻🤘🤘😎💪👊👊

@robfurlong85 6 лет назад

Rich Duperbash ok great, mine does have the extra holes! I'll go ahead and get one ordered, I love the one in my v3 kraton! My truggified typhon is a complete beast by the way! Thanks for all the help! 🤘👌💪👍👊

@nickteele169 3 года назад

When you truggify your typhon are you still running the straight tooth crown in the diffs or do you swap to a spiral tooth?

@richduperbash2966 3 года назад

I run straight tooth for MX28's or Trencher 2.8's. Anything larger I recommend spiral cut Kraton gears. 🍻😎💪👊👊

@nickteele169 3 года назад

@@richduperbash2966 thanks man. Just got a typhon this weekend n started thinking to myself...i could truggy it if i wanted which prompted several other questions, that being the main one.i figured if i do it id need to go spiral for anything decent sized but nobody has mentioned it that i had seen anywhere so thank you man

@ChrisNY86 5 лет назад

Hey buddy, really appreciate you clarifying things for me on the subject of the TT vs Outcast hybrid. I've watched the vid a few times now and I'm just looking to confirm that besides the kraton or outcast stearing blocks and hex's... I also would need to buy/borrow from other rigs an outcast or kraton front & rear axles? Also going to need some decent offroad tires/all terrain tires and would love to have my new in box typhon setup as you do for both street as well as an offroad beast basher. Anyways I was about to buy the whole drivetrain off ebay when I realized it may not be necessary to buy more than the front/rear dogbones and cups, am I correct on that ? Lastly I'm sure looking for your input on replacement hardware and whether or not to simply replace ALOT of my original outcast hardware that's worn or damaged by myself prior to getting decent metric hex tools. So any info or tips on what seems like a straightforward job until I got to overthinking things lol and have since read very different specs to the basic TRUGGIFIED mod specs since. Thanks in advance brother and I genuinely appr all your efforts to helps some new Jack's like myself with all your knowledge and tips that sure is an enormous help to us all in the basher/arrma community. Owe you 1000 times over brother! Hope you can find the time but if not no hard feelings... bash on buddy!

@168grhp 6 лет назад

for the truggified typhon, is it just the front hubs axles and hexs you change, or front and rear?

@richduperbash2966 6 лет назад

korelinlakes you swap both front and rear with Kraton parts. Allows 2.8 MT wheels to clear the hubs and makes it WAY more stable with regular buggy wheels also. 😎💪👊👊

@proudcanadiansteinke9619 6 лет назад

Rigs are looking good

@Ebenau0317 4 года назад

Hi Rich love your videos, awesome! Question for ya, so if I have an outcast and I want to make it look like a typhon, all I need to do is buy a typhon body??

@kjdva 6 лет назад

Nice vid! Do you not need the kraton arms to truggify? Also, if I'm getting the v3 typhon and I want to trugiffy, should I get v3 kraton parts?

@richduperbash2966 6 лет назад

kjd15328va to "Truggify" a Typhon, you only swap for V2 Kraton hubs, hexs, and axels. I'm not 100% certain about the new V3 hubs. I'm thinking they added some plastic reinforcement, but think the length dimensions are the same between V2 and V3. Otherwise they would've had to change the axels. Just realize V1 Kraton hubs and hexes don't jive with V2/V3 stuff. They still sell V1 stuff so be careful if you go to buy stuff.😎💪👊👊

@kjdva 6 лет назад

Rich Duperbash ok thanks

@madmax99gsr 6 лет назад

Rich Duperbash Love ur stuff bro quick question.. so I own a arrma Typhon V1 same concept applies right as far as kraton and/or outcast V2 and V3 hexes hubs and axles being compatible with the Typhon v1? Any insight on this would be a huge help

@srcparadise3315 6 лет назад

Great vid Rich. U need to put a heatsink/fan combo on the Typhon. I'm very happy with the blue hobbywing heatsink fan combo I run on my BE6S. Depending on the size of your motor you may need to...very slowly and carefully...bend the hobbywing to fit tight, but when it is snug on the motor it is a great combo...and it's only like $10 bucks👍👍👊👊🤛👊💪💪💎

@richduperbash2966 6 лет назад

sRCparadise thanks brother, I've heard good things about those Hobbywing fans/heatsinks. I rarely drive it on 6s like this for hard street running. Temps are normally just fine with 4s bashing anyhow. Appreciate the the tip though Steven, will definitely keep that in mind 🤔🙋🙋😎💪👊👊

@MrNiteriders1 6 лет назад

Good stuff Rich. Typhon looks sweet. It looks quick to. Can’t wait to see how it does. Please have Angie D test it. Dad might break it😂😂👍👍👍👍👊👊👊

@richduperbash2966 6 лет назад

Kenny mph Melanko thanks brother...Lol. Angie has a heavy finger in the street no doubt 😨. She could probably show Dad a few things though. Just glad that wasn't my Subaru parked there. I would've jambed the wing up pretty good I'm sure...Lol. 🤐😕😮😱😵😵😲😎💪👊👊

@MrNiteriders1 6 лет назад

Rich Duperbash kids having a heavy finger. No way lol. I’m sure it will be a good bash. Can’t wait to watch👍

@richduperbash2966 6 лет назад

Kenny mph Melanko no doubt brother, watching kids bash is always a gamble and a joy...Lol!!! I just have my wallet on standby cuz I know it's getting lighter soon.😨😰😰😬

@MrNiteriders1 6 лет назад

Rich Duperbash it’s def a gamble. My wallet is drained haha. Winter is coming. Break time lol👍

@SethJLamb 6 лет назад

Makes me want a Typhon....yours flies!

@richduperbash2966 6 лет назад

Seth J. Lamb they are great rigs brother!!! Very underrated IMHO and versatile, too. One heck of a screamer in the dirt when set up Truggified. Really tough little bugger...Lol.🙋🙋😲😲😵😵😨😎💪👊👊

@caraddict 5 лет назад

Say you could only buy/build 1 6s arrma. Stock outcast/notorious, truggified typhon, stock Kraton, or outcast hybrid?

@richduperbash2966 5 лет назад

caraddict the Truggified Typhon is still my personal favorite 😍. That said, I love them all and usually think the Outcast/Notorious is among the best choice for pure challenge, wild FUN, and mixed sized terrain venues👌. The Truggified isn't ideal at rough construction sites or places with scattered rocks...etc. It's brutally tough with shorter arms....etc. and fast as heck, just can't really gauge how much others would prefer it. 🍻🤘🤘😎💪👊👊

@atifkhan2351 5 лет назад

Hey rich will the v2 kraton hubs /axles fit the typhon to get a wider stance? Thanks

@richduperbash2966 5 лет назад

Yes they will👊. You also need the Kraton/Outcast hexs to match. 🍻🤘🤘😎💪👊👊

@atifkhan2351 5 лет назад

@@richduperbash2966 Thanks. I might just put on some rc8t 17mm hex adapters as I just want wider stance not truggy wheels. Yours is sweet 👌

@richduperbash2966 5 лет назад

@@atifkhan2351 that will work 👊. The TA hex pin is slightly bigger. You can use the stock pin or drill out your axels for the bigger TA ones. 🤘🤘

@atifkhan2351 5 лет назад

@@richduperbash2966 Thank you

@turdy909 3 года назад

Need the hex extender arrma code please anyone can’t seem to find it , I’m running typhon 6s v5

@richduperbash2966 3 года назад

Best to simply swap for Kraton hexs, hubs, and stub axels. You can also do just M2C +5mm universal hexs or both together for an extra 2" of total width. m2cracing.net/arrma-v5-notorious/593-m2c-3160-arrma-17mm-hub-extenders.html

@MaximumRC_ 5 лет назад

Hey Rich, what is that front TBone bumper? Is it made for the Typhon or Outcast?

@richduperbash2966 5 лет назад

Hey Ed 👊. I run Tbone Typhon 6s Basher bumpers on all my 6s rigs. They're small/simple and get the job done 👌. Part #10007. I'm a simple dude and stick with what works for my needs. Just realize you may need the Arrma Composite ball cup goodie bag. The mini Arrma bumper keeps the hinge pins locked in. And make sure to rebolt the red hinge pin holder back to the diff case if you go this route. 😎💪👊👊

@RcFunDrizzy 6 лет назад

I like the setup on the typhon looks mean 💪 it was moving to 👍

@richduperbash2966 6 лет назад

Rc Fun thanks so much brother!!! Those G-locs on 6s are MAD fun with a widened/Truggified setup. SO stoked about your new Kraton BEAST!!!👍👍😨😨😨😱😵😎💪👊👊

@pyroskeg69 6 лет назад

AWESOME !! Perfect Rich this helps me Tremendously 😃😃😎😎😎😎. I cant wait to get mine !!!😃😃😎😎👊👊😆😆😆 I've gotta be honest im gonna have to truggify mine when i get it just like you have done 😎😎. Looks so stable 😎😎. Great info . This will be a easy swap out 👌👌👌 This just made my day bro😎 ( its been a not so good one for me😅 lol ) Love the drifting and running through the leaves 😃😃😎😎👌👌. Damn shes QUICK 😃😃😃 Im probably gonna pull the 2200kv out of the pro mt and put the blx combo into it untill i can get it a metal spur ( ill run the proMT on 4s now untill they start making them ) may as well make the typhon NUTS 😎😎. Ive gotta be honest tho brother😓😓 i dont know if i will bash the absolute crap outa the typhon . i really like how it looks, i may be nice with it for awhile 😎😎

@richduperbash2966 6 лет назад

Rc Anonymous glad the vid is helpful brother!!! You'll love the Typhon in Truggified form I'm certain. You can widen it with hex adapters, too, but that will likely stress the bearings and stock hubs a bit more. My Typhon bodies have held up for over a year now and that's with some brutal abuse between me and the kids...Lol. They don't hit the ground much with rolls. The 2200 is definitely strong in the Typhon. You're going to love it brother!!! Tough as frigging nails. Racking out for the night. Talk soon my friend.🙋🙋😲😲😲💪💪💪💪😎👊👊

@FarmPrepper1 6 лет назад

So Mr. RICH, WHAT'S THE TUITION $$$ for enrollment @ DuperBash Basher State University ? Do you finance or do I need student loans?......

@johnmoulton2742 4 года назад

Love your vids, rcs and mods. Why 20 weight rear, 50 front differentials?

@williamperri3437 2 года назад

Not sure I ever saw this video. This was right before I started watching you in 2018. Thing just seems sort of like like a SWB Talion when on road.

@richduperbash2966 2 года назад

Both are Mad fun William 🤗. My Truggified Typhon was like a gocart with those 2.8 JConcepts on F11 rims 🤣. Basically impossible to traction roll. 😎💪👊👊

@williamperri3437 2 года назад

@@richduperbash2966 I don't think I ever traction rolled my Talion with stock Kitar's either. Love that set up on road! I'm excited about the TLR Typhon 4sure 😱 I feel like it will sit nicely in feel between the 6s and 3s Typhon. May have a slightly lighter feel than the 6s. My Losi Tenacity DB Pro is one of my all time favorites. Losi rigs always seem to hit or miss.

@timotheeliens8616 6 лет назад

can i truggyfie my senton 6s V2 ? is it as wide as the typhon ?

@richduperbash2966 6 лет назад

Timothée Liens yes you can Truggify it. The Senton has shorter A arms than the Typhon though I believe. Pretty sure Stewdog Stew Truggified his and Dubbl-A on the Arrma Forum also. I'd double check with them on what they did. Many simply add hex adapters to widen the stance and receive 2.8 wheels.🙋🙋😱😲😲😲😵😎💪👊👊

@zubuxstein 5 лет назад

If you could slap a lola body, that thing would rip through the turns... nice setup, runs great!

@richduperbash2966 4 года назад

Thanks Brother 👊!!!! Just saw your comment 👀😎💪👊👊

@oakwestplayer 6 лет назад

Hey Rich! I got a typhon v2 that I think I have everything to make it into a outcast hybrid. I basically have everything from a kraton. Arms, hubs, hexes, links, dogbones and cvds. I also have kraton shock towers and shocks. Is that all that's necessary to convert my typhon over?

@richduperbash2966 6 лет назад

poo butt sounds like you have it all covered 😂!!! If you have an assembled Kraton, you could literally just swap the entire front and rear end as a unit onto the Typhon chassis to make an Outcast Hybrid 👊. Just need to adjust body mounts for the Typhon body to work. I had to Dremel the rear body of mine at the stock holes cuz the span is wider on the Kraton tower and mounts. 🍻🤘🤘😵😵😵😎💪👊👊

@oakwestplayer 6 лет назад

@@richduperbash2966 thanks for getting back to me homie! All the parts are loose so I'm gathering it all up and trying to picture it in my head. How about the diffs? Should the diffs be converted to spiral cut? I know I've asked this before about my truggified typhon. Should the outcast hybrid run 3.8's? If so I'm sure spiral cut is a must.

@richduperbash2966 6 лет назад

poo butt the Outcast Hybrid needs spiral cut gears for sure 👊. You definitely want 3.8 wheels both for size and to pair with the smaller 10T spiral input gear. It takes a bit longer building by parts, but it's fun and worthwhile in the end. 🤘🤘

@oakwestplayer 6 лет назад

@@richduperbash2966 Thanks brother! I sit around and watch all your videos and get so inspired. This is definitely my next project. Thanks again.

@richduperbash2966 6 лет назад

poo butt you're most welcome brother 👊!!! Appreciate you saying that 🍻. Good luck with it my friend. 🤘🤘

@damienplumpton7069 5 лет назад

Great vid Rich as always. No requirement to get the Outcast turnbuckles for a truggified typhon ?

@richduperbash2966 5 лет назад

Damien Plumpton thanks brother 😂!!! That's correct. The Truggified Typhon only needs the Outcast/Kraton hexs, stub axels, and hubs front and rear 👊. Still uses stock arms, links, towers. The Truggified takes an incredible beating and is still my favorite all around RC 😍🍻🤘🤘😎💪👊👊

@damienplumpton7069 5 лет назад

Thanks legend !! you the King 👑

@thomasanghel9922 4 года назад

Someone as the link for those wheels ? The one on the typhon he use in the street?

@richduperbash2966 4 года назад

Here a link to the G Loc tires. I glued them to Proline F11 17mm hex 2.8 rims. 😎💪👊👊www.ebay.com/i/192864526950?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=192864526950&targetid=595076248688&device=m&mktype=pla&googleloc=9032516&poi=&campaignid=6470636529&mkgroupid=81597519750&rlsatarget=pla-595076248688&abcId=1140476&merchantid=101703468&gclid=CjwKCAiA3abwBRBqEiwAKwICA-9ypuHsLe3RbUZ6tWN-dkr_JmFr55As12-Z33VzOMu08_KQJfgwhxoCXkAQAvD_BwE

@anthonyarnold906 6 лет назад

All I can say is sweet

@richduperbash2966 6 лет назад

Anthony Arnold thanks brother!!!👍👍😵😵😵😲😱💪😎👊👊

@oakwestplayer 6 лет назад

I did the rear on my typhon adding hubs, hexes, and axles. Gonna do the front tomorrow. Anyway to adjust the toe in, toe out on the rear? I can't remember if it was this bad before I began. Seems like 1 side is worse than the other. Tia, Lord Duperbash!

@richduperbash2966 6 лет назад

poo butt the rear only has camber adjustment via the camber links. I'd double check you put all the little plastic spacers in at the hubs where the outer hinge pins go. The rear should have some toe in by design. The front is more stable with some toe out. Hope this helps.😎💪👊👊

@jasonjoy3990 6 лет назад

Is it worth the money for the castle system or did u notice alot more power

@richduperbash2966 6 лет назад

Jay Jay not sure if it's "worth it" persay cuz the stock system is very strong IMHO. I already had the 1515 2200kv Castle motor with the Sidewinder 8th combo I borrowed from my Backslash. I bought the Mamba Monster X ESC after my stock BLX185 crapped out. It definitely puts the power down. Not sure if it's the high rated internal BEC or what, but it's noticable. I normally only run 4s now when running the Truggified off road. 6s was barely drivable and shredded my MX28 despite being taped. I'm a fan of the stock electronics and feel Castle stuff is generally overpriced, but this X is a nice ESC no doubt.🙋🙋😱😨😵😵😵😲😎💪👊👊

@drog343 6 лет назад

Rich Duperbash, Yeah the X is nice, that's what I have on my Summit, because of its ability to run both brushed and brushless motors, plus how smooth it runs sensored. Then I just swap motors depending on running conditions.

@jakedaniels7896 6 лет назад

Neat! For a v3 typhon, would you use v3 kraton parts?

@richduperbash2966 6 лет назад

Jake Daniels I'm not 100% certain on this, but I don't think they changed the length or width dimensions between the V2 and V3 stuff. Otherwise they likely would've had to change the axels. Don't know of anyone that has Truggified with all V3 parts yet to say for certain.😎💪👊👊

@TWISTEDScene 5 лет назад

Hey so I know you said that you was getting hit with alot of questions and stuff but one quick one. Are those outcast control arms and axles? Already did the the hub conversion.

@richduperbash2966 5 лет назад

The Truggified Typhon just has Outcast hexs, hubs, and stub axels to make it about an inch wider and allow for 2.8 wheels. It keeps the stock control arms, links, and driveshafts. The Outcast Hybrid maintains the Outcast arms...etc. 😎💪👊👊

@ROCONN508 4 года назад

@@richduperbash2966 Hey Rich what body posts do you use to mount the truck body to the trugged Typhon? Have everything else laying around but no clue what posts to use..

@richduperbash2966 4 года назад

@@ROCONN508 I used Proline Slash mounts bolted to the rear tower and fabbed a bracket to bolt a Proline mount to the front tower. It's way easier to use Senton towers and body mounts though. 😎💪👊👊

@ROCONN508 4 года назад

@@richduperbash2966 just freed up a set of senton shock towers yesterday.. Damn I'm allmost in business! Thanks bro love the vids and the help!

@richduperbash2966 4 года назад

@@ROCONN508 you bet Brother 👊. Happy bashing 🤙🤙

@proudcanadiansteinke9619 6 лет назад

Rich how do u on mount your glued tires

@richduperbash2966 6 лет назад

RC RIDER I taped and glued my own rims and tires. You can bake off the tires if you want to remove them. Check out RC Girls vid on tire removal.😎💪👊👊

@andrewap77 6 лет назад

Awesome! What motor esc combination do you have in there.

@richduperbash2966 6 лет назад

Tank 62 thanks brother, Castle 1515 2200kv with Mamba Monster X ESC.👍👍😨😱😵😵😲😎💪👊👊

@andrewap77 6 лет назад

Rich Duperbash Thanks

@SethJLamb 6 лет назад

The motor temps seem high. What is your preferred temp to not exceed?

@richduperbash2966 6 лет назад

Seth J. Lamb my motor definitely got toasty, but I wasn't surprised. Running a 19 tooth pinion with hard throttle/hard braking at high RPMs with lots of wheel spin does it usually after just a few minutes without a cooling off period anyways. I generally try not to exceed 170F. Usually gear my rigs, for bashing anyhow, to about 150-160F tops. Any hotter and you start losing efficiency/power. Much cooler, you're not getting the most out of the system IMHO. Guys that run high torque, long can motors on higher voltage is a different story. They tend to run much cooler for long periods, but there's a big weight penalty with that for doing bigger airs, too. I try to run smaller 6s packs for this reason. Lighter is quicker and usually means less breakages, especially when things go bad...Lol!!!😎💪👊👊

@SethJLamb 6 лет назад

Rich Duperbash totally get it. I have my MT set to notify me when i hit 170 degrees. I’m installing a cooling fan to add some help. Just also traded my Nero for a Kraton, so when that’s up and running, I’ll do the same. I run small battery packs too. I was always told to run 1 battery vs 2. So I have some small 4500 6s packs from smc. Got them on sale. Cheapest price per MAH in 6s.

@richduperbash2966 6 лет назад

Seth J. Lamb great trade!!! The Kraton breaks WAY less than the Nero and is way easier to work on from everything I've heard on the Forum and elsewhere. Those 4500 SMC packs are AWESOME!!! Just bought 2 more Basher 6s 4000mah today cuz they're only 47$ right now with no tax or shipping from Hobbyking. I had 2 already but dropped one in my garage when a carry container flipped, landed hard on a corner, cracked the case and ultimately lost a cell😨😲😥. I was so pissed...Lol!!! It couldn't have landed any worse. Only had a few runs with it at most. That's good you watch your temps carefully. Some don't even bother, but that's just crazy to me...Lol.😎💪👊👊

@SethJLamb 6 лет назад

Rich Duperbash yea. I literally broke the nero every time I used it. On park run and such, it was fast and fun, but anytime I went to the bmx track, I broke it every time. Just too heavy of a vehicle. I jumped at the chance to trade it for a hooked up Kraton. Much easier to work on for sure. I wanted to ask you, how tight do you keep the suspension on the Typhon for it to drift? I run them on my Hyper TT and that thing will just reaction roll and flip all the time.

@richduperbash2966 6 лет назад

Seth J. Lamb sorry brother, I'm missing notifications on some messages??? I don't change my suspension setup from dirt to street. I run arms level all the time with spring preload collars. Could be the tire compound and wheel stance/width you're running. I literally can't flip my Truggified running these G-locs. They do controlled slides with throttle inputs/steering adjustments. You might consider a wider street tire and hex extenders. When I said "gocart" style, I wasn't kidding with these wheels...Lol. They are ribbed internally with blue foams. They balloon a tad at high speeds, only momentarily while on hard throttle, and are very firm otherwise. Glad you traded out the Nero. They seem to break regularly.😎💪👊👊

@djcrank4life 3 года назад

Best all around tries for typhon?

@richduperbash2966 3 года назад

I like Proline MX buggy tires for just Ripping around hard. Still like the MX28's for ramp hits and better air control. Can't say there's an all around best tire. Depends on terrain and driving preference. The Proline Belted Trenchers 2.8 got my hopes up, but they turned out to be too heavy and stiff for my taste. 😎💪👊👊

@djcrank4life 3 года назад

@@richduperbash2966 how about dboots and hoons ?

@richduperbash2966 3 года назад

@@djcrank4life dboots Hoons are Fantastic road tires. They work Killer on the Typhon 😍. I run them on both my Infraction and new Typhon based road Beast. I prefer the 42/100 Hoon Speed wheels. www.amazon.com/ARRMA-Dboots-Belted-Inserts-Mounted/dp/B07SQ97RNS

@reubydo 5 лет назад

POS do a long rear skid plate buddy 👍 highly recommend it for the Talion

@richduperbash2966 5 лет назад

Reuby Doobe thanks Brother 👊. I've seen it and it looks BADASS 😱. I might order one, but I've done well with RPM rear skid, Voltage chassis braces, and a tower to tower brace. 🍻😎💪👊👊

@reubydo 5 лет назад

@@richduperbash2966 I run the same but with POS front tower for the outcast and shocks and drive train. Plus same on the rear. Beast as you have seen. I didn't bend the chassis last time out so I think it definitely helps. I've not bent the rear end since fitting it in the summer. I gave her some serious shit but it's Still straight

@iam2loki4u 6 лет назад

that is seriously bad-arse... do you have a list somewhere of what modifications you made to the typhon?

@richduperbash2966 6 лет назад

Christopher Bates thanks brother 👊!!! I don't have a parts list at the moment. Hoping to start adding links in my descriptions soon. I'm pathetically low tech 😵, but slowly getting there🤔. 😎💪👊👊

@iam2loki4u 6 лет назад

Rich Duperbash fair enough... I heard various parts mentioned but was trying to figure out the critical items - like shock towers, braces, the parts from the other model you mentioned (like the knuckles and arms) might be a new project for the spring /summer

@richduperbash2966 6 лет назад

Christopher Bates the Truggified Typhon is just a 1" wider Typhon after swapping for Kraton hubs, hexs, and stub axels. Allows for 2.8 size 17mm hex wheels to fit without rubbing the stock rear hubs. Still uses stock towers, arms, and driveshafts. You disassemble the front CVDs and replace the Typhon stub axel with the longer Kraton ones. Strapped Proline MX28s are perfect for the Truggified Typhon.😎💪👊👊

@ralphs9531 6 лет назад

We've got lift off!

@paulrakis 4 года назад

I'm sure u got a heat sink and fan for it by now. 👍

@richduperbash2966 4 года назад

Nope 😁. I'm not gonna fault using them, but prefer to just gear accordingly or swap wheel sizes/mass to control temps. 😎💪👊👊

@paulrakis 4 года назад

@@richduperbash2966 wow man that's bad ass. Yeah that's definitely the right way to keep your motor cooler by just using proper gearing for your application. I'm definitely cheating by using fans. I just installed the fan for the typhoon 3s on the heat sink. People been blowing motors like crazy by over gearing her. Now armma had already installed them on there new models coming out soon.

@richduperbash2966 4 года назад

@@paulrakis good deal Brother 🤗. The other thing about the 3s models is the slipper housing can trap dirt making fine dust that gets pushed into the front motor bearing 😱. In short, it's crucial to keep the box maintained. There's a mod first posted on the Facebook ARRMA 3&4s Forum detailing how to vent the box to solve this problem. It involves using a Dremel punch drill to create a spur gear slit in the chassis just like the 6s rigs have. I've tried it and it works. 🍻🤙🤙

@paulrakis 4 года назад

@@richduperbash2966 great thanks for the info on that. Yes I know I put some gorilla tape right where the spur gear sits it actually creates a nice seal been pretty good so far. Gonna do a 26T run next weekend once I get the parts. HR motor mount also helps with the heat. You can blow so much money on Mods and you might as well just get the typhoon 6s lol. 3S with stock electronics and suspension is fantastic out of the box I don't know why people change it nice and nice stiff springs. I think is just for the looks to be honest. I love your videos Rich nobody bashes like you. Beautiful terrain as well makes me wanna come to California.

@paulrakis 4 года назад

@@richduperbash2966 forgot to ask what radio would you recommend for the notorious? I'm stick of the spectrum don't work well with my Typhon using my redcat on it way better far as the range and I never loose control. My 6S needs to have better control and range. Thanks

@JSprayaEntertainment 6 лет назад

0:03 OOOOHHHHHHHHH !!! 7:38 .... lol He Turns Left a lot more than right ... ... Yup

@VtreyusV3 6 лет назад

Please stop calling it a Tyfawn. It's Typhon (Tyfun)

@richduperbash2966 6 лет назад

Vtreyus whatever you call it, I LOVE IT 😱. That little sucker is my favorite RC 😍🤘🤘😎💪👊👊

@miketye2805 6 лет назад

So you need the kraton/outcast rear carries hex and axles too right? Same in back as front? That’s it?

@richduperbash2966 6 лет назад

Mike Tye yes, front and rear👊. Just the Kraton/Outcast stub axels, hubs/carriers, and hexs to widen a Typhon and make it "Truggified". Also for bigger 2.8 MT style wheels to fit without rubbing. 🤘🤘😎💪👊👊

@miketye2805 6 лет назад

Rich Duperbash thanks brother! Very helpful! Just deciding which route to go. If I wanna get a kraton and make it truggy based or get typos and truggify that. Decisions 😩 Already have an outcast just want a “truggy feel”. Tekno would be my dream just out of my budget I think. Lol

@miketye2805 6 лет назад

Rich Duperbash I know the talion but I think kraton is better option cause I think the stance is a bit bigger ect. An basically same thing but bigger or longer I think. An can just throw a truggy body on kraton

@richduperbash2966 6 лет назад

Mike Tye you might just want to get the Kraton 😱!!! It handles completely different from the Outcast. Much more stable in the air on the ground. It's better suited than the Outcast for really getting the power down. These choices are difficult. I love my Truggified Typhon 😍 but it has limits on really rough terrain where the Kraton excels. Don't forget the V3 Talion 😱!!! 😎💪👊👊

@miketye2805 6 лет назад

Rich Duperbash yea I feel like I need a kraton in my life lol I’m starting to get the feeling that every RC owner should have one. Going to LHS this weekend they have one. 💪🏼 ordering voltage stuff now. Sub to me I don’t have but 2 videos but I’m gonna start putting content out this weekend better.