Artillery Sidewinder X4 Plus 3D Printer - A Refreshing Change!

Подписаться 42 тыс.

Просмотров 11 тыс.

50% 1

#artillery3d #3dprinting #pcbway #giveaway
PCBWay: www.pcbway.com/
To Purchase - shrsl.com/4f9wu
Save Extra $99! Get 5k of filament free until March 15, 2024!
‪@Artillery3D‬
#giveaway Rules
Congrats to @Pogi5000 for winning the X4Plus!
* Must be 18 Years or Older
* Must live in the lower 48 states of the United States and Parts of the EU
* Drawing will be randomly picked in a month
* Drawing will be randomly picked in the comments section. I will respond to the winner off that comment. You will have 24hrs to respond. If you do not respond in 24hrs, another comment will be randomly picked.
** Artillery responsibly for this giveaway and rules are subject to change.
Please watch other videos to see what product is best for you.
Printer Features
The X4plus printer boasts several key features that set it apart from others in the market. Firstly, it is equipped with Klipper Firmware, allowing for a maximum speed of 500mm/s, with the default speed set at 300mm/s. This ensures fast and efficient printing. For smooth and precise movement, incorporated XY-axis metal linear rails, which reduce resistance and enable high-speed movements with utmost precision. Last but not least, the larger build size of 300x300x400mm offers expanded possibilities for your printing projects, providing ample space to materialize your ideas.
Printing Technology - FDM
Build Volume - 300*300*400 cm (L*W*H)
Product Dimensions - 510*490*680mm
Net Weight - 15.5 kg
Typical Printing Speed - 300mm/s
Max Printing Speed - 500mm/s
Max Acceleration - 10000mm/s²
Printing Accuracy - ±0.1mm
Printer Frame - Robust All Metal Design
Filament Diameter - 1.75mm
Nozzle Temp - ≤300°C
Hotbed Temp - ≤100°C
Build Surface - Dual Sided Textured Magnetic PEI Plate
UI Language - Support English, German, Chinese
File Transfer- USB Drive, Wifi
Extruder - All Metal Dual Gear Direct Drive
Levelling Mode - 121 Point Auto Levelling
Display Screen - 4.3 inch Touchscreen
Print File Format - G-Code
Resume Printing - Yes
Rated Power- AC100/240V
Rated Voltage - 450W
Slicing Software - Artillery Slicer, Cura
Support Filament - PLA/TPU/PETG/ABS/PET/Carbon
Input Shaping - Yes (Preset in Factory)
Pressure Advanced - Yes (Preset in Factory)
Dual Support Rods - Yes
Auto Clean Nozzle - Yes
Filament - #polymaker ‪@Polymaker‬
us.polymaker.com/
TH3D Bed Cement - ‪@TH3DStudio‬
www.th3dstudio.com/product/th...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, @Creality3D silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5-f3 #3DPrinter #3DPrinting longerlk5pro longer3dprinter #LK5PRO 3D Printer Ender 3 Max, Creality Ender 3 Max Neo, Sovol SV01 Pro, #creality #Neptune4 #budget3DPrinter TwoTrees #sk1 #artilleryswx4plus

Развлечения

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@xtalviper 3 месяца назад

I will print spools of filament, that way I'll never run out.

@3dPrintCreator 4 месяца назад

Thanks for your Informative video, I love the artillery machines, I have a Sidewinder X1 and a Genius here (first models). Since it has an all metal hot end and can print large format things, I would love to print custom car parts on the machine, made from materials like PC-plus or NGEN.

@user-ks5wr2gq3v 4 месяца назад

Hi, like the video. Two hints, you might want to check that the z-axis is perpendicular to the bed with a large carpenter's square or maybe a shelf... The printer's design has excellent adjusting abilities. If it is skev you'll notice in higher prints. Second, you may want to increase first layer's nozzle % print volume perhaps going from like 100 to 103 or so. Considering the bed has such rough texture it consumed more filament and your calibration was probably very good. If I had this printer I would be printing helmets and a few large vases in pla silk.

@michaelhatch1371 4 месяца назад

Thanks for the review. I would print gridfinity stuff to organize my toolbox.

@Firstleaker 4 месяца назад

Oh a giveaway! 1st and best review out there! Many thanks for being straight forward like usual 👍 I would print some parts for my Volkswagen 😊

@MRdlH 4 месяца назад

That's an awesome printer and review. Thank you so much! Probably I will use it to print very huge pieces, largest than now I can print in my friends printer (genius one). That's could include some game inserts, and pieces for fornitures and cars... I love how fasters looks... Thanks again for your review!

@mortegutt 4 месяца назад

Thanks for the review. The printer looks like a beast! Live in EU and over 18 years old! I will print toys for my kid, and DnD stuff for myself 👌

@corgijim2003 4 месяца назад

Great review. I was looking at the SW2 for $199, but this new release with Klipper and new improvements seems like it will give better prints faster. I would be printing larger models of my own 3d scanned hand-sculpted sculptures an designs.

@user-cb8fr8gx3v 4 месяца назад

Nice printer. Great size. I like the full blown version of Klipper. I would print some bigger parts for pinball machines.

@richardknecht492 4 месяца назад

Loved the review. What to print???? Its gotta be big... so probably go with a canister for olding kitchen tools (spoons, spatulas, tongs, etc.) Yeah, that will do it!

@LSEngraving 4 месяца назад

Thanks for the video!!

@imanolalonso5454 3 месяца назад

It will be my first printer, so I surely print tons of benchies. Great video.

@betoniokmarek1388 4 месяца назад

Great test, the printer is a development of Artillery X3 Plus, the company has potential

@SweetTherm 4 месяца назад

Nice overview. I've got some home organization prints that I'd make with this printer.

@kix1227 4 месяца назад

Now I want one. Such good prints. I would print paint racks for my Vallejo paints.

@zenkiivi6853 4 месяца назад

Been looking for reviews for this printer. Thank you. I would print helmets with this one. And some bigger functional parts, that I currently need to cut to pieces before printing.

@Creativepops5 4 месяца назад

Looks like a decent option as a larger printer. Missing some modern features but I'd stick with PLA to keep things simple. I'd try printing some photography accessories.

@MrDonXX 4 месяца назад

Great information on the video I would use this in my business to print my Razor Stands and Shaving Soap holders this would be perfect for that plus my TPU soap molds

@003mburns 4 месяца назад

Great video! Thank you for taking the time to do that. I am looking for my first printer, and the X4 is very high on my list at the moment. I am into RC cars and trucks, so my first prints would be bolt on parts, i.e., bumpers, skid plates, and structural parts.

@Freshmograph 4 месяца назад

Looks like a great machine. I would love to print custom-designed parts for hiking/camping. More immediately though, I'd like to print custom light sabor wall mounts for my daughter's room.

@AdrianHernandez-ki9dx 4 месяца назад

Nice printer with nice build size. I would probably print planters & maybe some helmets.

@buildersmark 4 месяца назад

Great video John!! Would probably print the eagle's head (bust) model. I think this printer would be a good run for that since it has a good size build volume.

@BriansModelTrains 4 месяца назад

Great video! If I had a larger printer I would print more O scale Model Railroad train cars and larger buildings.

@AverageGamingTech 4 месяца назад

I've been waiting for this printer to come out. But I would print an articulating robot arm. Or a full size Mano helmet. Great video!

@jamievalentin1193 3 месяца назад

With a printer this size, I'd print some challenging kids puzzles that had multiple levels, kind of like nested boxes with different methods of unlocking each one.

@spotbeem 4 месяца назад

i would def print helmets and cosplay props !! great unboxing vid!

@mattironforge 4 месяца назад

great video! Did you have a chance to try the fist layer test with another smooth plate?

@3Ddrvce 4 месяца назад

i like it, would be too cute to print alot of stuff that i have on mind.

@FrogglickerSpace 4 месяца назад

I've been hunting to a larger format printer with Klipper, so this fits the bill. I would be building high power rocket parts including nose cones using this printer. Very excited to see the release.

@oldsjunkie1 4 месяца назад

It's insane that they expect us to still use a piece of paper to set Z on a $500 printer in 2024... Seriously guys. EVERY company gets really close, then drops the ball.

@RobotRon_2084 3 месяца назад

I really only have to relevel the bed like twice a year though.

@thibbrgt8223 4 месяца назад

Looks like a nice printer for that size and price range, maybe a different and less rough plate would be better tho!

@mauiduffer 3 месяца назад

Great review. I’m looking to print RC sailboat and sailplane parts to build with my son.

@roykettenis4965 4 месяца назад

I love the look of this printer if I would own one I would print a lot of helmets and nice big wall ornaments.

@nctplarry 4 месяца назад

Thanks for this thorough video. Just last week, I gave away my Sidewinder X1 v4 to a young fella not far from my home, because he is interested in learning more about 3D printing. That means I have a vacant spot on my workbench now and need to put a good printer in that space. As soon as I get my new printer in place, I will be pulling a whole bunch of filament through that machine, because I have some project requests stacked up to make for other people. I'm a woodworker (retired Industrial Arts teacher), so several of my woodworking friends need some jigs that are "naturals" for the 3D printer. Also, I'll be making some PLA-printed labels to go onto some boxes that are being used for planters...and a whole bunch of tags for my friends who are gardeners, so they need labels for their seed starting ventures, as well as labels to use for plants they make for the farmer's market. Yep, that'll keep this fella really busy. Many of the things I make are efforts to complement and improve several efforts going on in my city.. Lots and lots of "plastic" labels have been asked for. So, it will be my pleasure to crank those out for my community.

@franxeli8128 4 месяца назад

*Wow! This video blew me away with the quality and versatility of the Artillery X4 Plus. It would be a dream come true to become the proud owner of one of these printers. I can imagine all the incredible creations I could bring to life with it, from intricate models to functional prototypes. I'm thrilled at the opportunity to experience firsthand everything you've showcased in this video. Thank you for the detailed review and for offering this amazing giveaway! It would be an honor to have the chance to work with an Artillery X4 Plus in my own workspace. Greetings from Spain, and best of luck to all participants*

@juancamilomartinez4188 4 месяца назад

The 3d printer is good I would print huge organizers and big usable objects for my store!

@jaki1876 4 месяца назад

Seems like a very nice candidate to replace my ender 3 v2 neo, which has been breaking down constantly. I’d use this new printer to finally print my decorative water wheel that i designed for my terrarium.

@AM_Lite 4 месяца назад

It'd be nice to have a large build area like this. I'd print full cosplay pieces. Bummer they left out auto-z offset!

@JuanMartinez-et7hc 4 месяца назад

New to 3D printing so I would learn to print all things possible with this printer

@jkemper96 4 месяца назад

I'll be printing game piece holders for my board games. Like Settler's of Catan! Great video!

@rad3d1951 4 месяца назад

Seems to be a solid bedslinger. Great video! Would print a Mandalorian helmet.

@bryeif 4 месяца назад

Very interesting printer! If I had this large scale printer I would use it to print large scale dinosaurs bones for my son, he is absolutely obsessed with them at the moment!

@Tgspartnership 4 месяца назад

nice looking printer. i would be interested in printing some acoustic panels

@TruthHurts2u 3 месяца назад

I just bought one. I've been using a Makerfarm from 2014 upgraded to an I3V and completely modded with a bed size of 180mm X, 190mm Y and 375 Z. I had it printing really good but it finally broke again and I'm tired of always working on it. The Sidewinder is going to be like moving into the space age directly from the stone age. Even the downsides of it are going to be upgrades for me.

@l0udPL 4 месяца назад

I like the fact that z-axis has supports, which were missing with very popular X2 model. But it's too bad manufacturers are still staying with "screws at the bottom" frame mounting system. I saw on Sovol S06+ it's done better and it's stiff even without supports. Anyway on that printer I would print many enclosures for my electronics projects as it seem to be good on solid walls.

@sargonmedia 4 месяца назад

thats soo cool. I always wanted to have a 3D printer. whenever i get one, i'll definitely have to watch all your videos for the tips.. sign me up haha

@danob9869 4 месяца назад

acoustic panels in vasemode, looks like this printer makes some nice sides

@davidmcdaniel4322 4 месяца назад

I would totally attempt and fail to print a helmet of some kind, but then I would use that failure as a learning opportunity, and print another one, and hope I’ve improved

@FherraZ 4 месяца назад

Looks like a good printer, nice review! It would be great to have a helmet size 3D printer and be able to do some business with it!

@TomaszDobrowolski 3 месяца назад

Nice review ;) I got X1 at home and using it for printing some terrain pieces for wargaming, but my main thing - I design and prototype my own mechanical keyboards and the large volume is awesome for printing custom cases - so probably would use that one for the same thing - keyboard cases... ;)

@tjl1602 4 месяца назад

Interesting Printer. Nice that it has Rails, but why the Knobs. Like the large scale. If I had one my first print would be Westie. Something for the sample white filament.

@user-wb9pl2ol3g 3 месяца назад

Loved the viedo, I think that sw x4 is great 3d printer, I was so excited for its announcement. I would print some boats parts for my scout team. I already printed some but my old 3d printer died.

@paulwood6686 4 месяца назад

I'm looking to upgrade to a larger build volume printer. This will be in the running. I will be working on larger scale sci-fi models for my prints.

@frankthetank1912 4 месяца назад

Great video. If I had one of these I'd finally be able to print some larger models like helmets and replacement parts.

@TripodsGarage 3 месяца назад

@frankthetank1912 You have been randomly picked by commentpicker.com for the giveaway! Please confirm that you live in the lower 48 and or the EU? You have 24hrs to respond to this comment. If you fail to respond in 24hrs, the will be another random picker. Congrats!

@TripodsGarage 3 месяца назад

Sorry, rules are rules, no response in 24hrs 😞 I have to redraw.

@frankthetank1912 3 месяца назад

@@TripodsGaragesorrry didn't see the notification. Good luck everyone

@frankthetank1912 3 месяца назад

@@TripodsGaragebtw I live in NJ

@stephengittins6116 4 месяца назад

Super video, really informative. It'd be nice to know if you managed to get the first layer test to work correctly and how you did it i.e. it came off in one piece and not like a fly curtain. Love to make some really cool prints for my grandchildren, especially since they are into Spiderman and Dinosaurs.

@matthewgarcia2819 2 месяца назад

Can you just buy a accelerometer and it be plug and play for input shaping?

@victormorales885 4 месяца назад

It is extremely interesting, it is a special printer which I would like if it were my first 3D printer, I would use it mainly for university projects

@redrocker1582 3 месяца назад

I'm thinking of getting this one or the Pro. I'm not sure if I need a Plus, but it might come in handy one day so I won't have to cut and glue pieces together. I have so many ideas I need prints for. From tools, blinders, boxes, tubes for gardening, forms for resin for my fiance, even some chess figurines for my dad - he always wanted to have some cool and realistic looking chess pieces. I bought some filaments already. So excited to start printing soon :D

@AGaborr 3 месяца назад

This printer looks cool. I am thinking about buying this or Neptun 4 plus maybe x3 plus. I would print a boat (not benchi, a little bit bigger one ;) )

@robenc9549 4 месяца назад

would love to try some cosplay helmets on the x4 plus , great review , nice printer so far what i see.

@robenc9549 3 месяца назад

I am here

@PaulMillhouse7 4 месяца назад

Might be under-extruding on the first layer tests. Check your E-steps calibration.

@sucatkane 4 месяца назад

I would print helmets with this I loved my x1 and this is the improvements I would do to it

@HybridRobotix 3 месяца назад

How do you think the X4 Plus would do with solid bed mounts? I do not get along well with manual bed leveling. Is Klipper the full deal? Can one get in and tinker with Klipper settings? I love the bed size, display, and speed. I would be printing robot, robotics, mechatronics, and functional parts for myself. I need to print some Multiboards and such for my tiny studio apartment so I can have all my parts within easy reach.

@alberdw1985 4 месяца назад

Looks like an awesome printer , I would use a printer of this size to make all kinds of stuff but I'd especially like to make a pirate ship model for my 9year old nephew he would really love that

@glanzone 4 месяца назад

Great job yet again John. If I won I would print a full-size helmet on it.

@maverick_dk 4 месяца назад

I'm curious if it supports Klipper plug-ins. Looks like a nice printer!

@dvogonen 4 месяца назад

I would use the printer to print the myriad of adapters and holders that I need for my RV. Everything needs to be held in place when you are on the move.

@jthedarkwolfxtreem 4 месяца назад

Beautiful filiment

@michaelwuchitech7598 4 месяца назад

This would be a nice printer to do gaming terrain

@schrikeiv 4 месяца назад

I like the addition of the stabilization rods and the Spring steel plate ....but everything else. They added messes it up. The X2 was almost perfect if they had added those 2 features and a full metal hot end...... This is way more messy than their previous printers........ That cable system is absolute clusterf#@%...... I have an x one and couple of their x twos and they are way cleaner designs....... I do not know why everybody always b****** about the printer cables. That's what printer cables were made for. Never had an issue with those...... Really hope they go back to their original designs. So much more elegant and once the x two was dialed in works great There's still not a fan of the access plastic at the top for the spool holder little wonky......but other than that...... This seems like a major step in the wrong direction.😤

@dennysawyer3980 4 месяца назад

Looks like a nice, large printer. I would use it to print toys for Toys for Tots and Samaritan's Purse for Christmas - could fit a lot of little toys on that bed!

@deervalleyengravings3088 4 месяца назад

Good job. I have the x3 plus. I was curious about the x4 plus. I would take one off there hands, but i dont know if i will buy one yet.

@bestevercody 4 месяца назад

Looking at the X3 plus, hear mixed reviews, what are your thoughts? Might opt for the x4

@deervalleyengravings3088 4 месяца назад

@@bestevercody It me way to long in, my opinion, to get my x3 plus bugs worked out, i like the linear rails on the x4, you dont have to worry about loose essectric nuts. It does print faster has klipper, but i have never used klipper. I hear good things about klipper.

@Thewahlenfollower 3 месяца назад

My kids love printing and they have a pile of backlog my x2 can't get too.

@boomer-86 3 месяца назад

I am very interested in this printer, it seems to have some features similar to other comparable models, I like the rails, they seem more stable than some of the round tube rails. I am looking to print some models of Ships from Star Citizen, as my goal. Once I get some learning under my belt.

@Yarek871 4 месяца назад

Nice video, I really liked it. If I had this printer I would print some hardness tester parts and Iron Man costume for my son.

@joaogomes3215 3 месяца назад

Great video! with this printer i will print some mmpr helmets and live my childhood dreams of being a power ranger ahah

@MystikSquash 4 месяца назад

I would print drone parts and camera accessories

@everythingplusultra 4 месяца назад

I would print large planter pot 😅

@Joesbert 4 месяца назад

Its a toss up between the Rocketeer helmet, or a large voronoi planter, or some shop organizers

@joseluismartinez1817 Месяц назад

Buenos dias , compre una impresora artillery x4 plus hace veinte dias al segundo dia de uso el interruptor de encendido no funciona, el motor del extrusor deja de funcionar, la pantalla de la impresora se queda conjelada y la maquina deja de funcionar por completo al cabo de 9 dias. pongo dos tikets a soporte y llevo 12 dias sin respuesta. Tengo dos artillery sidewinder x2 mas y no he tenido problemas con ellas pero la artillery x4 que he comprado esta totalmente defectuosa y el servicio de atencion al cliente no me da ninguna solucion. Por mi experiencia y por lo que he leido en plataformas se trata de una impresora pesima no la compren si estan a tiempo.

@ismaelsoltero3047 4 месяца назад

Impresora muy interesante! Si tuviera esta impresora a gran escala, la usaría para imprimir huesos de dinosaurios a gran escala

@Mitokafander 3 месяца назад

I'd probably print something for my mom. Flower vase or something.

@probang2866 4 месяца назад

Pretty made review. A teardown would have been from interest for me, somehow. What I would print first? An inlay for my tool drawer, constructed matching with the tools. To store my tools in a orderly way. After that: Casings for my electronic projects, models (X-Wing, Tie-Fighter, Gunstar, Eagle, Star-Fury) and random stuff for the household would be on the list.

@reviewmirror 4 месяца назад

I have the X3 plus and would like to compare it against the X4 😊

@AndrewAHayes 4 месяца назад

The leveling wheels put me off from the get go, no auto z offset then! Those bed adhesives with the pads are a pain as they wear away well before even 10% of the adhesive is used, the spray ones are much better.

@3dmedicvince449 4 месяца назад

Not a Benchy. Maybe see if the 3D Chameleon can be adapted to it and do multi-color prints.

@user-cb5ti3vp9c 4 месяца назад

I’d be printing tools and dinosaurs just faster than I am now.

@Jay-ro5wc 4 месяца назад

I would like to design and print some custom plant pots and electronics enclosures!

@willowehrich6207 3 месяца назад

If print very large rc jets!

@sand_man3467 4 месяца назад

I would print so much gridfinity

@mahendradhungel8011 4 месяца назад

Will printer a door jam.

@andyb5547 4 месяца назад

Lot of similarities to the Elegoo neptune 4 plus, but better in the ways it needs to be. I would print all of the things, thangs, printables, and more!😅

@wantomek 4 месяца назад

My first real print job on this printer wold be a CanSat model for the high school students I mentor.

@Mccluffster 3 месяца назад

I would print part that I have designed for work, home and friends.

@moscou1268 4 месяца назад

This looks incredible ! I am looking for a 3d printer that has a huge printing volume because my old wanhao d12 is broken and I cant print larges figurines...

@user-kv9on1is9p 3 месяца назад

I will print tool accessories for my shop!

@billiverson1437 4 месяца назад

I would use it to make parts for my cnc machine.

@maxnguyen22 4 месяца назад

I just got a sidewinder X1 as a start out printer and 3 weeks in it messed up. So I'm in between getting a new one or repair. Like to print out marvel super heros for the kids

@ceb0610 3 месяца назад

This would finally get me into printing helmets lol

@marcocapovin 3 месяца назад

I will print my projects to have a better quality and to optimize the print time. I’m 20, after high school I worked for one year and then I started studying again. Thinking about future I didn’t really know what to do, but I really love 3d printer. It’s like 1 month that I started selling some of my prints (of mine project), now I need another 3d printer because It will help me a lot :)