Warning: swinging any revolver cylinder closed will wear down the insides and after a while it won’t reliably rotate and you may have accidents where the cylinder isn’t aligned properly.
Don't worry about not being able to swing the cylinder shut by flipping the gun. You don't actually do that with real revolvers as it will damage the gun. In the movies they do that, but not in real life.
Really wish they did the green gas version of this. It would be so much more practical for me. Sometimes you just want to pop off a few shots, not having to use the entire CO2 capsule.
I have foind on ALiexpress a CO2 capsule shaped gas tank with filling valve at bottom and exit one at the top. It is quite cheap (like $10) and I think it could work in the revolver quite well. I have only tested it in a GBB Mini Uzi replica and the Green Gas doesn't have enough power to reliablty cycle the action (close, but no cigar) - which is not a problem in a revolver. One thing to note - it is necessary to be able to fill the capsule after it was inserted into the gun/magazine otherwise it would have gas for only a couple of shots - that is the problem you can find in the showcases and poor reviews on youtube and on the site - so it might require slight modification of the nut (drill it through) but other than that I think it could work well in the revolver.
You saw evike has the EF Glock 18c's? Can't wait to see a rewiew on them. Also whats up with the lack of content? Very supprised you didn't pick up the EF Glock 19x yet
At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.
@@hannibalsmithairsoft5923 it's quite glossy, it gets a rainbow gun metal effect when it's destroyed in fingerprints, and when it's wiped down it's just very dark and shiny nearly black almost. I do prefer it to the silver one I have
Had the original gun a while now. Eventually parts wear to the point that the cylinder catch (being plastic) can no longer perform and hold it in place. Trigger is a bit iffy, a few other issues. That said, I’ve not maintained it at all, it does/did shoot hotter than quoted. You can also modify the power really easily. Overall a great gun and I certainly don’t regret getting it, however would I buy it again? I don’t think so. With all of that in mind, this is likely upgraded now, and I am aware you can buy replacement parts so this was just my ‘two cents’
@@throttlegoblinfpv ah. makes sense now. Thank you! Could you maybe help me decide between ASG DAN Wesson original 8" vs this 715 6" version? can't decide!
@@SC-rk7be im sure you like either one, the 8" is of coure more badass looking also i have a 3D printable shell design, which are meant to be cheap and moreless not as worrisome to lose on the field, i also made a speed loader that fits regular speed loader pouches
Just got one of these and need advice- When i'm loading the co2 cartridge, its hisses and sprays co2 out over the cartridge. Am i twisting the 'alan-key' too slowly?
@@lefishe2485 much obliged, good sir. Final question; is it bad to leave a 'not empty yet' cartridge in the gun over time? Will fade over it's own or damage the gun. Thanks again
@@thomasmartin5182 it’s actually best to leave one with a little gas in rather than none, as the seal can deteriorate over time with no pressure against it
@@storminormtharp5948 it's what shows its not a real gun. If a cop sees it without the orange tip he might shoot you. Plus it's required in some states.
Hard to say as I have not truly counted shot for shot but I want to say 60-100 per capsule. Since there is no moving parts which uses more gases, you get more out of these revolvers.
I was thinking of this model 6"BB but i noticed the 4" shoots pellets, I like the chrome. What do you think about the difference between BBs and Pellets. Thanks
10:19 speed loader first insert them on holder load bb's then load weapon. how fast is it. only works if have many speed loaders ready. nobody has LOL its faster insert bb and load it revolder lol
also on a real gun or that toy slamming the cylinder is bad for alignment of a real gun but that's just a simple toy for children and not heavy build so who cares. don't look into business end and watch BB come out
you don't know much about function or real guns, example vents on top of barrel is for esthetics and in theory some function for cooling, release for cylinder is in wrong place, not a 1 to 1 but great toy for you
