Ashville's Transmission Returns & The Pit Steel Arrives! Ch  

I’ve heard young Cal speak more in this episode than I’ve heard in the last 12 months!

Another great video,think it's great how Yiu work with so many other businesses and give them not only a shout out but time to say who they are and what they do so a chance to get word of their business out there, great work everyone

How that Arcair went through that pin was unreal - like hot knife through butter!!!

Yet another great episode. The amount of work you're doing is impressive. Cal is a type of man who builds wealth of nations. Hard-working, diligent, quiet. A real treasure in every company.

A night with Sam at the stockies should be in the cards. You'll get to see some action with they boys . There no wired up right.

Wot a weekend. You and Cutting Edge Engineering both get new highly effective tools and immediately put them to work. Fantastic!

Only 9 minutes in enjoying watching Baz & Cal go at it together welding, efficient operation 💪 ⚡️ 💥

Very impressive young team sorting Ashville’s machine !!

Well done cal, I had two apprentices I trained one silver and one gold at Birmingham just before covid st in

Cal, man of few words but a man of many skills

Drop the spare wheel on the hilux and check the beam that holds the fuel tank, id be fairly certain it will have rotted out where the muck sits on top of the tank. Easy job for yourself, done mine. Definitely keep it!

Baz, another great chapter. I enjoyed the change in lapse time music. I'm glad to see the different vendors and what they do. Always looking forward to more videos. The Directors pick up looks smart and clean. Keep up the great work. Cheers.

Brilliant video fabber cal pizza oven looked excellent ❤

My 2 favourite channels on utube..Welderfabber & Ashville..top guns..👍

Forklift pockets are a god send when picking things up, so much easier & sturdy.

Great stuff as always

BAZZ Loving the CEE HAT! love watching the his channel!

Had 2 Lithuanian guys working for me yonks back - whenever they hit a stuck pin, they'd grab an 8 foot length of solid bar, slightly smaller than the stuck pin, tack weld on a piece of tube about 18" long to the outer bush, over the end of the pin, to act as a guide, slide in the long solid bar & hit that with a sledge. That method shifted even 6 foot long hammer-shredder pins that hold the hammer arrays in - you can stick a 50 ton hydraulic ram onto those & they won't budge at all - the 8 foot solid bar & hammer trick shifted even those. Anyone who has ever had to shift hammer-shredder pins knows just how stuck in place those puppies get (and there's several of them in a hammer shredder rotor) - shifting those educated me that there weren't too many stuck pins on earth that could resist moving using that method with the bar. On a hammer shredder (big ones) the pin goes through maybe 10 or 12 bushings, which all seize onto the shaft, impossible to heat, impossible to cut & usually impossible to shift using hydraulic pressure. The massive shock loading of the 8 foot bar slamming into it - bingo, they come out. Works on every pin.

Another great video 👏🏽 Keep them going 💪🏼

Top lad bazza mate consistently great work keep the strength up great videos

52:21 great content

Cal must be getting a bit of action at home. He's mad to chat today😂

Watching the dozer repair.well how do you all know how to put that monster back together, it's mind blowing, I'm sure Daniel will be pleased when the transmission is sorted out. It's such a diverse cutting edge work load, you guys are just extraordinary. X

you can't go wrong with Cal you've got a good one there

We all love our cal 😊.....oh...and you baz 😂😂...Great content yet again

Fantastic video Baz just catching up on videos now my daughter home from Australia to get married hard time trying to sort everything I'm the only parent as her mom died so it's a tough time your videos give people a lift yere absolutely brillant people

Top work lads.You have got a cracking team Baz with a massive heart to help anyone who needs it 👍

That lance is great, but what a weapon in wrong hands! Learning loads.

The uprights on them barrier frames will fill with water with there being no hole at the bottom of the little piece of box section between the uprights instead of on top of them.

When I saw Callum cleaning the mig set when he was at Fox you definitely have no need to worry about him looking after your equipment.

Another cracking video and the Cal pizza oven is ace

GOOD GOD can it get any better, This brilliant video made my day, Dave.

Brilliant video….. a mix of everything 👌🏻😍 I’m really looking forward to seeing the inspection pit being dropped it 🤞🏻😁

Well done Baz and team so knowledgeable and adaptive so much content in you're video's thank-you

Good morning guy's, Another belting episode, nice to see the company steadily growing, always new work to be done. Stay safe.

Name that tune 07:40 dubai expo .. 16:20 .... last of the summer wine .. All aside mate keep it going you have done so well your name and reputation got you where you are well done lads

Handy tool for getting that pin out good job

Great video baz, love the pin removal, never seen anything melt metal like that,

What a fantastic bit of kit!! When you cut through the pin

Another great chapter well done guys stay safe all. 👍👍👍

BAZ . you need to get some Welderfabber Welding sleaves made. I would buy one here in Australia

Another super video from all your team iam delighted that you’re new adventure has took off as quickly as it has

Thanks for sharing, have a great weekend guys.

That exothermic setup is just this side of magical.

Great work guys another cracking video enjoying the journey

Awesome video, thank you baz Great work everybody

Main thing with the pit floor Baz is whoever does the concreting needs to poker the hell out of the first pour. If there’s air pockets it prob needed more pokering. (Not your part of the job I know,)

Baz make sure you have some MasterBlasters in the unit. The wronguns will have ear bleeds.

Hopefully the transmission works out lot of hours spent there another great video Baz cheers

Interesting seeing them jaws show up. Eagerly waiting for a call back in a comparable business.

Nice beetle tucked away. .looks like your going to outgrow your workshop before long.

Excellent video, thanks.

Another great episodes baz Cal pizza oven look good😄😄😄💞💞💞💞💞💞💯💯💯💯💯💯💯💯💯💯💯💤💤💤👊👊👊👊👊👍👍👍🤏🤏💕💕💕

BAZ mate keep these chronicles going maybe I'll see you around kid

Good morning team bloody good show 👍👍👍

Nice vid baz....that thermal lance, You can use another make "broco" under water..... Use to use it diving industry.....we only use 300mm rods.... But what a bit of kit.....in the right hands. I went up against the American rep of broco, to see who could do longest neatest cut..... blindfolded......I won. Only reason blindfolded was in UK waters.....you can't see nothing coz of mud. Well keep the vids coming chap.

Busy busy. Good job help out Neil with the pin. Hope you other mate is doing ok if he is going through the process with his brain tumour. 👍

Was wondering if you’ve ever used a Thermal Lance Baz? Reason I ask is an Engineer in the Army we were tasked with removing a Sanger in a Barracks in South Armagh. It was 3/4 “ plate with a 4/5 “ Cavity (filled with concrete ) and another 3/4 “ plate inside which weighed around 40 Tons (estimated ) so had to be chopped up with a Thermal Lance due to the weight it had to be removed in chunks. Probably one of the most aggressive processes I’ve witnessed tbh. The heat was incredible btw.

Almost didn't notice Baz wearing CEE cap!

The chapter 8 frames hold stacks of the green barriers? Thanks for another interesting video, cheers from central Texas!

Fab content cal should be a DJ at silent disco he’s so quiet What a machine cutting out that pin from the neals sanbogen great video good job 👍 as usual all the luck in the future

That pickup looks pretty good , only problem is the steering wheel is on the wrong side

As allways great video and excellent content and the exothermic cutting rods i've only seen them used maybe four time in my live time by a friend who worked on industrial machines and heavy trucks sadly not with us any more, and things are getting there Baz .

Nice hat CEE.

Another fantastic video, absolutely smashing it as always cals got some fantastic skills love the pizza oven 👌👌 keep it up boys

The best truck in the world Toyota had one over eight years👌👌👌

Cheers from the US my Friends, Paulie B

As alway's a very intersting video keep up the good work stay strong and weld on.

1,140 👍's up WF thank you for sharing 🤗

👍👍 excellent Teamwork Men. Peace

Busy busy busy it looks like the move to go to work with your Dan is paying off. Great content this chapter so as always crack on lad to the next one

Excellent...Enjoyed the video...Good stock car man working with you guys now...

Great Video Baz & Team.

yet another great video there . shame about the transmision . lots of upcoming work for you lot keeping the work flowing .also having time to help others out by dropping by and helping get the stuck pin out . great to see you still have the time for those jobs . it's also good advertising as when you do those jobs others know if there stuck for a quick job your there Cheers .

Great video guys Great work and content guys What great bit of kit that is Baz that you used to burn the centre of that pin out. See you on the next one guys.

A uver grat one this weekend Baz and lads cep up the grat work

I applaud that but you are running a business, if there is a problem you are responsible but don’t have control, not a good situation, this isn’t a criticism but an observation, all the best 👍

Amazing work baz 🤙🏻🤙🏻🤙🏻🤙🏻🤙🏻

great eposode

Good morning 👍👍👏👏👏

Wee Sam looks so angry lol he needs to crack a smile baz hahaha

I’m getting ArcAir in my life👌

Baz I love the channel. I’ve watched since the beginning! I did want to ask about the 8 barrier frames. The upright will hold water and freeze. Shouldn’t it be capped off?

hiya baz.love watching your videos. When cal was welding the bucket in your shop what was the orchestrial background music ?.you have used it a few times.thanks

That pizza oven is the bollocks

That’s bad news on the Ashville project nightmare.

Few words but awesome welder Cal review on the 3M Speedglas good better than the last one?

15:49 nice pizza oven, was it used at all? 👍👍👍

If the chassis and Sills are still solid on the hilux run it a few more years if it’s starting to get shitty and soft in places may be time to move it on

Imagine being liebherr and having no parts on the shelf

Frames need cross members steel on steel one bump in the ground and they will tip side ways old fork lift driver ?

Would barrier pipes not be better on a slive so easier to take barriers off

Love your work Baz but you need a few pointers on how to strap stuff down on your trailer 😂

I bet Juice has a few stories 😂

Lets have ittttttttttttttttttttttttttt

Thon lance is the doggies bollox, right tools for job & no fkn about 😂

Bon Boulo 😆😆👍👍

😊😊😊😊😊😊

Where do we buy merch ??

'ey up Baz 👍👍👍