Assassin Harnds CK917 14C28N 

Перчатки я надел потому что на руках много шрамов , и большинство людей мне говорят что их нужно прикрыть. А то что нож немного не подходит вам по размеру, то это дело вкуса , в будущем может вам и попадётся именно такой как вы хотите.

@@BRASLET-KNIFE пусть бабы свои шрамы прячут, мужикам нечего стесняться.

apparently you got a defective copy, especially since there are old versions of this knife and new ones , you have an old copy

@@BRASLET-KNIFE , my knife have the pocket clip, i think is a a new model, but maybe i have a defective copy. the fact is ; i dont liked

@@maxprint94 my lock is strong enough , if you purchased this knife recently , you can open a dispute and show proof that your knife has problems , and then you will be given compensation, in some cases, sometimes they send a new knife .

@@BRASLET-KNIFE ....i can not to do this, because the price for send the knife to selller is most expansive in Brazil

but I suggest that you look again at the lock of your knife and notice how very light it is to disengage the linner from the blade ... try and you will see that it really is very easy. for this reason I paid for testing the coating steel (lock) and the steel is 3cr13mov and its hardness is 48 on the HRC scale, the blade is 14c28n and the hardness is 61....amazing. The lock on my knife is 100% solid, with no gap or any kind of failure, but what I didn't like was how the steel of the lock is soft and badly heat treated, because 48 of hardness for a 3cr13mov is very low, ideal in hardness for blocking linners it is in the range of 50 to 54 hrc. I currently have a partnership with a metallurgy factory and can test several knives for a very cheap price. I did recent tests on two eafengrow models and I was surprised by the steel, it really was D2, but the hardness was only 58 hrc, only that the lock steel of the two eafengrow models was 5cr15mov with 53 hrc, really very well done and STRONG.

Не 3007

@@user-lc9wr8jw3t верняк! но, тогда у меня был только 3002 и 3504)))))

@@kos.tanchik7365 ))